IHD3EB271L

IHD Vishay Dale Filter Inductors, High Current, Axial Leaded FEATURES • Printed circuit mounting (axial leads) • Protected by polyolefin tubing • High saturation bobbin used allowing high inductance with low DC resistance • Pre-tinned leads • High resistivity core offers very high parallel resistance, resulting in maximum coil performance • 20 sleeveless models available at reduced cost • Compliant to RoHS Directive 2002/95/EC ELECTRICAL SPECIFICATIONS Inductance: Measured at 1.0 V with zero DC current Incremental Current: The typical current at which the inductance will be decreased by 5 % from its initial zero DC value Dielectric Rating: 2500 VRMS between winding and outer circumference to within 0.250" [6.35 mm] of the insulating sleeve edge Operating Temperature: - 55 °C to + 125 °C (no load), - 55 °C to + 85 °C (at full rated current) Current Rating: Maximum continuous operating current (DC or RMS) based on a 40 °C temperature rise MECHANICAL SPECIFICATIONS Wire: Solid soft copper Terminals: 20 AWG tinned copper leads Core Material: Ferrite Coating: Polyolefin tubing - flame retardant UL type VW-1 per MIL-I-23053/5, class 3 requirements DIMENSIONS in inches [millimeters] B Max. 1.13 [28.70] Min. Typ. A Dia. Max. 0.032 [0.813] Dia. Typ. MODEL IHD-1 IHD-3 #20 AWG A (MAX.) 0.270 [6.85] 0.460 [11.68] B (MAX.) 0.700 [17.78] 0.900 [22.86] STANDARD ELECTRICAL SPECIFICATIONS MODEL IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IND. AT 1 kHz (μH) 1 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 Document Number: 34016 Revision: 04-Feb-11 TOL. (%) ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % DCR MAX. () 0.009 0.010 0.011 0.012 0.013 0.014 0.016 0.017 0.022 0.024 0.026 0.028 0.033 0.037 0.040 0.044 0.050 0.070 0.075 0.084 0.104 0.130 0.145 0.152 0.208 0.283 0.330 0.362 0.505 0.557 0.650 0.770 1.030 1.140 RATED DC CURRENT MAX. (A) 5.3 5.0 4.8 4.6 4.4 4.2 4.0 3.8 3.4 3.2 3.1 3.0 2.8 2.6 2.5 2.4 2.2 1.9 1.8 1.7 1.6 1.4 1.3 1.3 1.1 0.94 0.87 0.83 0.70 0.67 0.62 0.57 0.49 0.47 For technical questions, contact: magnetics@vishay.com INCREMENTAL CURRENT APPROX. (A) 7.00 6.40 5.70 5.20 4.70 4.30 3.90 3.60 3.30 3.00 2.70 2.50 2.30 2.10 1.90 1.70 1.50 1.40 1.30 1.20 1.10 0.97 0.88 0.80 0.73 0.66 0.60 0.54 0.49 0.45 0.40 0.37 0.34 0.31 www.vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IHD Filter Inductors, High Current, Axial Leaded Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS MODEL IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-1 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 IHD-3 www.vishay.com 2 IND. AT 1 kHz (μH) 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10 000 12 000 15 000 18 000 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10 000 12 000 15 000 18 000 22 000 27 000 33 000 39 000 47 000 56 000 68 000 82 000 100 000 TOL. (%) ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % ± 15 % DCR MAX. () 1.500 1.980 2.300 2.550 3.000 4.000 4.400 5.800 6.560 8.630 10.100 11.200 15.000 20.800 23.400 26.000 36.000 40.000 0.007 0.008 0.011 0.011 0.013 0.016 0.018 0.020 0.022 0.024 0.025 0.028 0.031 0.034 0.043 0.059 0.066 0.084 0.113 0.129 0.150 0.162 0.226 0.257 0.288 0.393 0.504 0.570 0.643 0.844 0.977 1.180 1.500 1.760 2.130 2.530 2.840 3.790 4.240 5.750 6.440 7.300 9.340 10.700 14.800 18.000 22.700 25.700 29.700 33.700 38.000 52.800 67.300 76.000 RATED DC CURRENT MAX. (A) 0.41 0.36 0.33 0.31 0.29 0.25 0.24 0.21 0.20 0.17 0.16 0.15 0.13 0.11 0.10 0.10 0.08 0.08 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.2 2.5 2.0 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.2 1.0 1.0 0.8 0.8 0.6 0.6 0.6 0.5 0.4 0.4 0.4 0.4 0.32 0.25 0.25 0.25 0.20 0.20 0.16 0.13 0.13 0.13 0.10 0.10 0.10 0.08 0.07 0.07 For technical questions, contact: magnetics@vishay.com INCREMENTAL CURRENT APPROX. (A) 0.28 0.26 0.23 0.21 0.19 0.18 0.16 0.14 0.13 0.12 0.11 0.10 0.09 0.08 0.08 0.07 0.06 0.06 8.20 7.50 6.90 6.30 5.70 5.20 4.70 4.30 3.90 3.50 3.20 2.90 2.70 2.50 2.30 2.10 1.90 1.70 1.60 1.40 1.30 1.20 1.10 0.95 0.88 0.80 0.74 0.67 0.61 0.56 0.51 0.46 0.42 0.38 0.34 0.31 0.29 0.26 0.24 0.22 0.20 0.18 0.17 0.15 0.14 0.12 0.11 0.10 0.09 0.09 0.08 0.07 0.07 0.06 Document Number: 34016 Revision: 04-Feb-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IHD Filter Inductors, High Current, Axial Leaded Vishay Dale MARKING - Vishay Dale - Model - Inductance value - Date code ORDERING INFORMATION IHD-1 3.9 μH ± 15 % ER e2 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I H D MODEL Document Number: 34016 Revision: 04-Feb-11 1 E R PACKAGE CODE 3 R INDUCTANCE VALUE For technical questions, contact: magnetics@vishay.com 9 L INDUCTANCE TOLERANCE www.vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000