IHLP-5050FD-5A
www.vishay.com
Vishay Dale
IHLP® Automotive Inductors, High Temperature (155 °C) Series
FEATURES
• High temperature, up to 155 °C
• Shielded construction
ADDITIONAL RESOURCES
• Lowest DCR/μH, in this package size
3D 3D
• Handles high transient current spikes without
saturation
Design Tools
STANDARD ELECTRICAL SPECIFICATIONS
• Ultra low buzz noise, due to composite construction
• AEC-Q200 qualified
DCR
MAX.
25 °C
(mΩ)
0.81
0.92
1.16
1.33
1.42
1.77
2.12
2.57
2.94
3.67
5.44
7.93
9.11
12.09
13.48
14.12
17.76
20.33
25.68
33.49
49.25
79.60
105.60
150.98
187.0
Notes
• All test data is referenced to 25 °C ambient
• Operating temperature range -55 °C to +155 °C
• The part temperature (ambient + temp. rise) should not exceed
155 °C under worst case operating conditions. Circuit design,
component placement, PWB trace size and thickness, airflow
and other cooling provisions all affect the part temperature. Part
temperature should be verified in the end application
• Rated operating voltage (across inductor) = 75 V
(1) DC current (A) that will cause an approximate ΔT of 40 °C
(2) DC current (A) that will cause L to drop approximately 20 %
0
• IHLP design. PATENT(S): www.vishay.com/patents
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Engine and transmission control units
• Diesel injection drivers
• DC/DC converters for entertainment / navigation systems
• Noise suppression for motors: windshield wipers / power
seats / power mirrors / heating and ventilation blower /
HID lighting
• LED drivers
DIMENSIONS in inches [millimeters]
Typical Pad Layout
0.580
[14.732]
0.195
[4.953]
0.326
[8.280]
0.522 ± 0.005
[13.259± 0.127]
0.508
[12.9]
Max.
R = 0.0396 ± 0.0002
[1.006 ± 0.005]
0.400
[10.16]
Typ.
0.530 ± 0.01
[13.462 ± 0.254]
0.252
[6.40]
Max.
0.085 ± 0.015
[2.159 ± 0.381]
0.01 ± 0.001
[0.254 ± 0.025]
0.053 ± 0.015
[1.346 ± 0.381]
0.000/0.005
[0.000/0.127]
DCR
TYP.
25 °C
(mΩ)
0.73
0.83
1.05
1.24
1.33
1.65
1.98
2.4
2.75
3.43
5.08
7.41
8.51
11.3
12.6
13.2
16.60
19.00
24.00
31.30
46.03
77.00
98.67
141.10
175.00
HEAT
RATING SATURATION
CURRENT CURRENT
SRF
DC TYP.
DC TYP.
TYP.
(A) (1)
(A) (2)
(MHz)
66
68
113
62
44
79.9
54
42
65.6
50
32
63.1
40
29
48.1
40
26
33.4
29
24.5
32.0
27.5
23.5
29.2
26
22.5
25.9
25.5
21.5
23.3
20.2
16.7
17.8
19.7
18.5
15.8
16.8
14.2
12.3
14.9
14.1
13.4
13.5
8.5
13.4
13.2
7.6
10.3
12.1
7.8
10.7
11.4
7.9
9.5
10.1
7.7
8.8
9.0
6.3
6.6
6.9
6.2
5.5
5.6
5.7
4.1
4.9
4.6
3.4
3.7
3.7
3.0
3.1
4.3
2.8
0.080 ± 0.010
[2.032 ± 0.254]
L0
INDUCTANCE
± 20 %
AT 100 kHz,
0.25 V, 0 A
(μH)
0.22
0.33
0.47
0.56
0.68
1.0
1.2
1.5
1.8
2.2
3.3
4.7
5.6
6.8
7.8
8.2
10
12
15
22
33
47
68
82
100
0.000/0.005
[0.000/0.127]
3D Models
• Excellent DC/DC energy storage up to 1 MHz
to 2 MHz. Filter inductor applications up the
SRF (see Standard Electrical Specifications
table).
0.185 ± 0.01
[4.7 ± 0.3]
0.400 ± 0.005
[10.16 ± 0.127]
PATENT(S): www.vishay.com/patents
This Vishay product is protected by one or more United States and international patents.
Revision: 21-Oct-2019
Document Number: 34337
1
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IHLP-5050FD-5A
www.vishay.com
Vishay Dale
DESCRIPTION
IHLP-5050FD-5A
4.7 μH
MODEL
± 20 %
INDUCTANCE VALUE
ER
INDUCTANCE TOLERANCE
e3
PACKAGE CODE
JEDEC®
LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER
I
H
L
P
5
0
5
MODEL
0
F
D
SIZE
E
R
4
PACKAGE
CODE
R
7
M
INDUCTANCE
VALUE
TOL.
5
A
SERIES
PERFORMANCE GRAPHS
100
0.33 µH
0.5
100
60
0.3
L
0.2
40
0.1
20
ΔT °C
INDUCTANCE (μH)
80
0.4
TEMPERATURE (°C)
0
0.0
0
20
40
60
80
80
0.4
L
0.3
60
0.2
40
0.1
20
0
0.0
100
0
20
40
DC CURRENT (A)
80
100
0.56 µH
1.0
100
0.6
75
L
0.4
50
0.2
25
0.0
INDUCTANCE (μH)
ΔT °C
TEMPERATURE (°C)
INDUCTANCE (μH)
ΔT °C
0
0
20
40
60
80
0.8
0.6
60
L
0.4
40
0.2
20
0
0.0
80
0
20
DC CURRENT (A)
40
60
80
DC CURRENT (A)
0.68 µH
1.0
100
DC CURRENT (A)
0.47 µH
0.8
60
TEMPERATURE (°C)
INDUCTANCE (μH)
ΔT °C
TEMPERATURE (°C)
0.22 µH
0.5
1.0 µH
2.0
100
100
60
0.4
40
0.2
20
0
0.0
0
10
20
30
40
DC CURRENT (A)
Revision: 21-Oct-2019
50
60
1.6
80
ΔT °C
60
1.2
L
0.8
40
0.4
20
TEMPERATURE (°C)
L
0.6
INDUCTANCE (μH)
80
0.8
TEMPERATURE (°C)
INDUCTANCE (μH)
ΔT °C
0
0.0
0
10
20
30
40
50
60
DC CURRENT (A)
Document Number: 34337
2
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IHLP-5050FD-5A
www.vishay.com
Vishay Dale
PERFORMANCE GRAPHS
80
ΔT °C
1.2
60
0.8
40
0.4
20
0
0.0
20
30
40
L
1.2
60
0.8
40
0.4
20
0
0.0
50
0
5
10
15
DC CURRENT (A)
100
60
1.0
40
0.5
20
INDUCTANCE (μH)
L
TEMPERATURE (°C)
INDUCTANCE (μH)
80
0
0.0
5
10
15
20
25
30
35
80
1.5
60
1.0
40
0.5
20
0
0
5
10
60
2.0
40
1.0
20
INDUCTANCE (μH)
ΔT °C
0
0.0
10
15
20
25
60
2.0
40
1.0
20
0
0.0
0
40
3
20
0
0
DC CURRENT (A)
Revision: 21-Oct-2019
20
25
INDUCTANCE (μH)
12
TEMPERATURE (°C)
INDUCTANCE (μH)
80
L
15
100
ΔT °C
3.0
15
6
10
40
80
100
60
9
5
35
5
10
15
20
25
30
DC CURRENT (A)
ΔT °C
0
30
4.0
30
5.6 µH
12
25
L
DC CURRENT (A)
15
20
4.7 µH
5.0
TEMPERATURE (°C)
INDUCTANCE (μH)
80
5
15
DC CURRENT (A)
3.0
0
100
0.0
100
L
45
2.0
40
3.3 µH
4.0
40
ΔT °C
DC CURRENT (A)
5.0
35
L
2.0
0
30
2.2 µH
2.5
ΔT °C
1.5
25
DC CURRENT (A)
1.8 µH
2.5
20
TEMPERATURE (°C)
10
80
1.6
TEMPERATURE (°C)
0
100
ΔT °C
6.8 µH
100
80
ΔT °C
60
9
L
6
40
3
20
TEMPERATURE (°C)
L
INDUCTANCE (μH)
1.6
1.5 µH
2.0
TEMPERATURE (°C)
INDUCTANCE (μH)
100
TEMPERATURE (°C)
1.2 µH
2.0
0
0
0
2
4
6
8
10
12
14
16
18
20
22
DC CURRENT (A)
Document Number: 34337
3
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IHLP-5050FD-5A
www.vishay.com
Vishay Dale
PERFORMANCE GRAPHS
7.8 µH
10.0
100
8.2 µH
15
100
L
60
4.0
40
2.0
20
0
0.0
6
9
12
15
18
6
40
3
20
0
0
21
0
2
4
6
10 µH
100
6
60
4
40
2
20
INDUCTANCE (μH)
80
0
0
5
10
15
100
L
60
8
40
4
20
0
0
0
5
60
8
40
4
20
INDUCTANCE (μH)
80
12
0
0
6
8
10
12
100
ΔT °C
14
20
80
15
60
10
40
5
20
0
0
16
0
2
4
DC CURRENT (A)
6
8
10
100
60
20
40
10
20
0
0
4
6
8
DC CURRENT (A)
Revision: 21-Oct-2019
10
12
INDUCTANCE (μH)
30
TEMPERATURE (°C)
80
ΔT °C
L
2
14
47 µH
50
100
ΔT °C
L
40
12
DC CURRENT (A)
33 µH
50
20
22 µH
25
TEMPERATURE (°C)
ΔT °C
4
15
L
L
2
10
DC CURRENT (A)
100
16
20
80
12
20
15 µH
20
18
16
DC CURRENT (A)
INDUCTANCE (μH)
16
12 µH
20
TEMPERATURE (°C)
INDUCTANCE (μH)
8
0
14
ΔT °C
0
INDUCTANCE (μH)
12
ΔT °C
L
0
10
DC CURRENT (A)
DC CURRENT (A)
10
8
TEMPERATURE (°C)
3
60
L
TEMPERATURE (°C)
0
9
40
80
30
60
20
40
10
20
TEMPERATURE (°C)
6.0
80
12
TEMPERATURE (°C)
80
ΔT °C
INDUCTANCE (μH)
8.0
TEMPERATURE (°C)
INDUCTANCE (μH)
ΔT °C
0
0
0
1
2
3
4
5
6
7
8
9
10
DC CURRENT (A)
Document Number: 34337
4
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IHLP-5050FD-5A
www.vishay.com
Vishay Dale
PERFORMANCE GRAPHS
100
82 µH
100
L
60
60
40
40
20
20
INDUCTANCE (μH)
80
80
0
0
2
4
6
80
80
60
60
40
40
20
20
0
0
8
0
1
2
DC CURRENT (A)
4
5
6
DC CURRENT (A)
100 µH
100.0
INDUCTANCE (μH)
3
100
L
ΔT °C
80.0
80
60.0
60
40.0
40
20.0
20
TEMPERATURE (°C)
0
100
ΔT °C
L
TEMPERATURE (°C)
INDUCTANCE (μH)
ΔT °C
TEMPERATURE (°C)
68 µH
100
0
0.0
0
1
2
3
4
5
DC CURRENT (A)
Revision: 21-Oct-2019
Document Number: 34337
5
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IHLP-5050FD-5A
www.vishay.com
Vishay Dale
PERFORMANCE GRAPHS: INDUCTANCE AND Q VS. FREQUENCY
0.22 µH
0.5
150
0.33 µH
1.2
120
120
L
0.2
60
0.1
30
Q
90
0
0.1
1
10
0
1000
100
80
0.8
L
0.6
0.4
40
0.2
20
0
0
0.1
1
0.47 µH
90
0.6
Q
L
60
0.3
30
0
INDUCTANCE (μH)
INDUCTANCE (μH)
Q
10
80
1.5
Q
60
L
1
40
0.5
20
0
0.1
100
1
FREQUENCY (MHz)
10
100
FREQUENCY (MHz)
0.68 µH
2.5
100
0
0
1
100
0.56 µH
2
120
0.9
0.1
10
FREQUENCY (MHz)
FREQUENCY (MHz)
1.2
60
Q
Q
0.3
100
1
Q
0.4
INDUCTANCE (μH)
INDUCTANCE (μH)
Q
1.0 µH
4
100
Q
L
100
80
Q
1.5
60
1
40
0.5
L
Q
60
2
40
1
20
20
0
0
0
1
10
0
0.1
100
1
FREQUENCY (MHz)
Q
60
L
4
40
2
20
0
0
1
10
FREQUENCY (MHz)
Revision: 21-Oct-2019
100
INDUCTANCE (μH)
80
Q
6
1.5 µH
12.5
100
8
0.1
100
FREQUENCY (MHz)
1.2 µH
10
10
125
Q
10
100
7.5
75
L
Q
0.1
INDUCTANCE (μH)
80
3
Q
120
2
INDUCTANCE (μH)
INDUCTANCE (μH)
140
5
50
2.5
25
0
0
0.1
1
10
100
FREQUENCY (MHz)
Document Number: 34337
6
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IHLP-5050FD-5A
www.vishay.com
Vishay Dale
PERFORMANCE GRAPHS: INDUCTANCE AND Q VS. FREQUENCY
100
L
5
50
Q
75
2.5
25
0
12
8
80
6
60
4
40
2
20
0
0
0.1
100
1
INDUCTANCE (μH)
L
15
100
60
80
50
Q
60
10
40
5
20
0
INDUCTANCE (μH)
3.3 µH
Q
0
0.1
1
10
4.7 µH
100
80
40
L
30
60
20
40
10
20
0
0
100
0.1
1
75
60
L
50
25
20
INDUCTANCE (μH)
100
Q
INDUCTANCE (μH)
Q
0
0
0.1
1
10
L
25
20
0
0
0.1
1
10
100
L
40
20
20
0
0
10
FREQUENCY (MHz)
100
INDUCTANCE (μH)
60
40
8.2 µH
80
Q
INDUCTANCE (μH)
80
Q
Revision: 21-Oct-2019
50
FREQUENCY (MHz)
60
1
75
40
100
7.8 µH
0.1
100
Q
60
FREQUENCY (MHz)
80
100
6.8 µH
80
125
40
10
FREQUENCY (MHz)
5.6 µH
80
120
Q
FREQUENCY (MHz)
100
100
FREQUENCY (MHz)
FREQUENCY (MHz)
20
10
Q
10
100
Q
80
Q
60
60
L
40
40
20
20
Q
1
120
10
0
0.1
140
L
Q
Q
7.5
INDUCTANCE (μH)
INDUCTANCE (μH)
10
2.2 µH
14
125
Q
1.8 µH
12.5
0
0
0.1
1
10
100
FREQUENCY (MHz)
Document Number: 34337
7
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IHLP-5050FD-5A
www.vishay.com
Vishay Dale
PERFORMANCE GRAPHS: INDUCTANCE AND Q VS. FREQUENCY
10 µH
100
100
12 µH
120
100
60
60
40
40
20
20
0
0
0.1
1
10
90
60
50
30
25
0
0
0.1
100
1
FREQUENCY (MHz)
75
50
40
25
20
1
Q
75
L
100
50
50
25
0
0
0
0
0.1
10
1
FREQUENCY (MHz)
300
80
240
60
Q
150
L
100
40
50
20
0.1
1
Q
80
60
L
120
40
60
20
0
0
10
0.1
1
FREQUENCY (MHz)
10
FREQUENCY (MHz)
68 µH
600
100
180
0
0
47 µH
Q
Q
100
INDUCTANCE (μH)
INDUCTANCE (μH)
200
10
FREQUENCY (MHz)
33 µH
250
100
150
60
L
0.1
100
22 µH
200
INDUCTANCE (μH)
80
Q
INDUCTANCE (μH)
100
Q
100
10
FREQUENCY (MHz)
15 µH
125
75
L
Q
L
Q
Q
INDUCTANCE (μH)
80
80
Q
INDUCTANCE (μH)
Q
90
82 µH
800
100
600
60
Q
400
30
200
L
60
400
Q
L
80
Q
INDUCTANCE (μH)
INDUCTANCE (μH)
Q
40
200
0
0
0.1
1
FREQUENCY (MHz)
Revision: 21-Oct-2019
10
20
0
0
0.1
1
10
FREQUENCY (MHz)
Document Number: 34337
8
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IHLP-5050FD-5A
www.vishay.com
Vishay Dale
PERFORMANCE GRAPHS: INDUCTANCE AND Q VS. FREQUENCY
100 µH
100
Q
800
80
L
600
60
400
40
200
20
Q
INDUCTANCE (μH)
1000
0
0
0.1
1
10
FREQUENCY (MHz)
Revision: 21-Oct-2019
Document Number: 34337
9
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000