IHV28EB60

IHV www.vishay.com Vishay Dale Filter Inductors, High Current, Radial Leaded FEATURES • Printed circuit mounting • Pre-tinned leads • Protected by polyolefin tubing - flame retardant UL type VW-1 per MIL-I-23053/5, class 3 requirements • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 ELECTRICAL SPECIFICATIONS Inductance: measured at 1.0 V with no DC current MECHANICAL SPECIFICATIONS Incremental current: 2500 VRMS between winding and outer circumference to within 0.250" [6.35 mm] of the insulation sleeve edge Terminals: extensions of the winding, solder coated Core material: iron laminations Operating temperature: -55 °C to +125 °C (no load), -55 °C to +75 °C (at full rated current) Encapsulant: polyolefin tubing Maximum usable frequency: 20 kHz DIMENSIONS in inches [millimeters] Style 1 Style 2 A Max. A Max. B 0.750 [19.0] 0.500 [12.70] Tinned E Dia. MODEL B 0.125 [3.18] Max. 0.125 [3.18] Max. Tinned C D 0.750 [19.0] 0.500 [12.70] C E Dia. STYLE A (MAX.) B ± 0.050 [± 1.27] C ± 0.062 [± 1.57] D ± 0.062 [± 1.57] E (DIA.) TYPICAL WEIGHT (g) IHV-15-500 1 2.45 [62.23] 1.45 [36.83] 0.980 [24.89] 1.95 [49.53] 0.082 [2.08] 305 IHV-20-200 2 2.45 [62.23] 1.45 [36.83] 0.980 [24.89] - 0.102 [2.59] 310 IHV-28-60 2 2.45 [62.23] 1.02 [25.91] 0.770 [19.56] - 0.102 [2.59] 160 IHV-30-150 2 2.45 [62.23] 1.65 [41.91] 1.080 [27.43] - 0.129 [3.28] 470 IHV-40-39 2 2.45 [62.23] 1.15 [29.21] 0.820 [20.83] - 0.129 [3.28] 210 IHV-45-92 2 2.55 [64.77] 1.92 [48.77] 1.210 [30.73] - 0.162 [4.11] 650 IHV-50-50 1 2.55 [64.77] 1.57 [39.88] 1.050 [26.67] 2.10 [53.34] 0.162 [4.11] 420 IHV-60-24 2 2.45 [62.23] 1.27 [32.26] 0.890 [22.61] - 0.162 [4.11] 270 STANDARD ELECTRICAL SPECIFICATIONS IND. AT 1 kHz (μH) (1) TOL. (%) SRF MIN. (MHz) DCR MAX. () RATED DC CURRENT (mA) IHV-15-500 500 ± 10 0.8 0.0500 15 000 IHV-20-200 200 ± 10 1.2 0.0210 20 000 IHV-28-60 60 ± 10 1.9 0.0085 28 000 IHV-30-150 150 ± 10 2.1 0.0130 30 000 IHV-40-39 39 ± 10 2.5 0.0048 40 000 IHV-45-92 92 ± 10 2.9 0.0075 45 000 IHV-50-50 50 ± 10 3.1 0.0045 50 000 IHV-60-24 24 ± 10 5.7 0.0025 60 000 MODEL Note (1) Will not change more than ± 10 % at rated current Revision: 30-Apr-2019 Document Number: 34022 1 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IHV www.vishay.com Vishay Dale MARKING - Vishay Dale - Model - Date code ORDERING INFORMATION IHV-15 500 μH ± 10 % EB e2 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I H V 1 5 MODEL E B PACKAGE CODE 5 0 0 INDUCTANCE VALUE Note • See the end of this data book for conversion tables Revision: 30-Apr-2019 Document Number: 34022 2 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000