ILC0402ERR15J

ILC-0402 www.vishay.com Vishay Dale Surface-Mount, Multi Layer High Frequency Ceramic Inductors FEATURES • High reliability • Surface mountable • Tape and reel packaging per EIA specifications: 10 000 pieces on 7" reel MECHANICAL SPECIFICATIONS Solderability: 95 % coverage after 3 s ± 1 s dip in 240 °C ± 5 °C solder following 60 s preheat at 100 °C to 150 °C and type R flux dip Resistance to Solder Heat: 10 s ± 1 s in 260 °C ± 5 °C solder, after preheat and flux above Terminal Strength: 10 kg for 10 s • Material categorization: for definitions of compliance www.vishay.com/doc?99912 please see ENVIRONMENTAL SPECIFICATIONS Operating Temperature: -55 °C to +125 °C Thermal Shock: 1000 cycles, -55 °C to +125 °C Humidity: +85 °C, 85 % RH, 1000 h at full rated current Flex: 3 mm min. mounted on 0.8 mm thick PC board Load Life: +125 °C for 1000 h at full rated current STANDARD ELECTRICAL SPECIFICATIONS TOL. TEST FREQUENCY (MHz) Q MIN. SRF (MHz) MIN. DCR MAX. (Ω) RATED DC CURRENT MAX. (mA) 0.3 nH 100 8 8000 0.10 300 1.2 0.3 nH 100 8 8000 0.10 300 ILC0402ER1N5S 1.5 0.3 nH 100 8 8000 0.10 300 ILC0402ER1N8S 1.8 0.3 nH 100 8 6000 0.10 300 ILC0402ER2N2S 2.2 0.3 nH 100 8 6000 0.15 300 ILC0402ER2N7S 2.7 0.3 nH 100 8 6000 0.17 300 ILC0402ER3N3S 3.3 0.3 nH 100 8 6000 0.19 300 ILC0402ER3N9S 3.9 0.3 nH 100 8 6000 0.19 300 ILC0402ER4N7S 4.7 0.3 nH 100 8 6000 0.23 300 ILC0402ER5N6S 5.6 0.3 nH 100 8 5300 0.26 300 ILC0402ER6N8J 6.8 5% 100 8 4200 0.29 300 ILC0402ER8N2J 8.2 5% 100 8 3600 0.33 300 ILC0402ER10NJ 10 5% 100 8 3200 0.35 300 ILC0402ER12NJ 12 5% 100 8 2800 0.41 300 ILC0402ER15NJ 15 5% 100 8 2300 0.46 300 ILC0402ER18NJ 18 5% 100 8 2100 0.51 300 ILC0402ER22NJ 22 5% 100 8 1400 0.58 300 ILC0402ER27NJ 27 5% 100 8 1600 0.67 300 ILC0402ER33NJ 33 5% 100 8 1500 0.67 200 ILC0402ER39NJ 39 5% 100 8 1200 1.06 200 ILC0402ER47NJ 47 5% 100 8 1000 1.15 200 ILC0402ER56NJ 56 5% 100 8 800 1.20 200 ILC0402ER68NJ 68 5% 100 8 800 1.25 180 ILC0402ER82NJ 82 5% 100 8 600 1.40 150 ILC0402ERR10J 100 5% 100 8 600 1.60 150 ILC0402ERR12J 120 5% 100 8 600 1.60 150 ILC0402ERR15J 150 5% 100 8 500 2.99 140 ILC0402ERR18J 180 5% 100 8 500 3.38 150 ILC0402ERR22J 220 5% 100 8 500 3.77 120 ILC0402ERR27J 270 5% 100 8 400 4.90 110 PART NUMBER IND. (nH) ILC0402ER1N0S 1.0 ILC0402ER1N2S Revision: 15-Jun-2020 Document Number: 34120 1 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILC-0402 www.vishay.com Vishay Dale DIMENSIONS in inches [millimeters] Ceramic Body 0.02 ± 0.002 [0.5 ± 0.05] 0.02 ± 0.002 [0.5 ± 0.05] 0.008 ± 0.004 [0.20 ± 0.1] 0.04 ± 0.004 [1.0 ± 0.10] DESCRIPTION ILC-0402 10 nH MODEL ±5% INDUCTANCE VALUE ER INDUCTANCE TOLERANCE e3 JEDEC® PACKAGE CODE LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I L C PRODUCT FAMILY Revision: 15-Jun-2020 0 4 0 SIZE 2 E R PACKAGE CODE 1 0 N INDUCTANCE VALUE J TOL. Document Number: 34120 2 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000