ILC0603ER82NJ

ILC-0603 www.vishay.com Vishay Dale Surface Mount, Multi Layer High Frequency Ceramic Inductors FEATURES • High reliability • Surface mountable • Reflow or wave solderable MECHANICAL SPECIFICATIONS Solderability: 95 % coverage after 3 s ± 1 s dip in 240 °C ± 5 °C solder following 60 s preheat at 150 °C and type R flux dip Resistance to Solder Heat: 6 s ± 1 s in 265 °C ± 3 °C solder after preheat and flux above Terminal Strength: 1.02 kg for 10 s Flex: 3.0 mm min. mounted on 0.8 mm thick PC board • Tape and reel packaging per EIA specifications: 4000 pieces on 7" reel • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 ENVIRONMENTAL SPECIFICATIONS Operating Temperature: -55 °C to +125 °C (including self-temperature rise) Thermal Shock: 1000 cycles, -55 °C ± 5 °C to +125 °C ± 5 °C Humidity: 85 °C ± 2 °C, 85 % ± 5 % RH, 1000 h ± 12 h Load Life: 125 °C ± 2 °C for 1000 h ± 12 h at full rated current STANDARD ELECTRICAL SPECIFICATIONS PART NUMBER IND. (nH) TOL. TEST FREQUENCY (MHz) DCR MAX. () RATED DC CURRENT MAX. (mA) ILC0603ER1N0S 1.0 0.3 nH 100 8 15 43 63 10 000 15 000 ILC0603ER1N2S 1.2 0.3 nH 100 8 14 38 55 0.05 300 10 000 14 000 0.05 ILC0603ER1N5S 1.5 0.3 nH 100 8 11 28 40 6000 300 13 000 0.10 ILC0603ER1N8S 1.8 0.3 nH 100 8 10 24 35 300 6000 11 000 0.10 ILC0603ER2N2S 2.2 0.3 nH 100 8 14 35 300 40 6000 10 000 0.10 ILC0603ER2N7S 2.7 0.3 nH 100 10 12 300 29 45 6000 7000 0.10 300 ILC0603ER3N3S 3.3 0.3 nH 100 10 ILC0603ER3N9S 3.9 0.3 nH 100 10 16 40 47 4000 5900 0.12 300 11 25 35 3500 4500 0.14 ILC0603ER4N7S 4.7 0.3 nH 100 300 10 11 26 35 3500 4500 0.16 ILC0603ER5N6S 5.6 0.3 nH 300 100 10 15 36 46 3500 4000 0.18 ILC0603ER6N8J 6.8 300 5% 100 10 15 38 47 3000 3600 0.22 ILC0603ER8N2J 300 8.2 5% 100 10 13 31 41 3000 3500 0.24 300 ILC0603ER10NJ 10 5% 100 12 15 34 47 2800 3000 0.26 300 ILC0603ER12NJ 12 5% 100 12 12 27 49 2000 2500 0.28 300 ILC0603ER15NJ 15 5% 100 12 15 30 36 2000 2200 0.32 300 ILC0603ER18NJ 18 5% 100 12 15 28 31 1800 2000 0.35 300 ILC0603ER22NJ 22 5% 100 12 17 34 36 1800 1900 0.40 300 ILC0603ER27NJ 27 5% 100 12 15 31 30 1500 1700 0.45 300 ILC0603ER33NJ 33 5% 100 12 15 28 24 1200 1500 0.55 300 ILC0603ER39NJ 39 5% 100 12 14 31 28 1100 1300 0.60 300 ILC0603ER47NJ 47 5% 100 12 17 31 28 900 1300 0.70 300 ILC0603ER56NJ 56 5% 100 12 19 34 26 900 1200 0.75 300 ILC0603ER68NJ 68 5% 100 12 17 30 20 700 1000 0.85 300 ILC0603ER82NJ 82 5% 100 12 16 29 18 600 1000 0.95 300 ILC0603ERR10J 100 5% 100 12 16 24 3 600 800 1.00 300 ILC0603ERR12J 120 5% 100 8 17 21 - 500 800 1.20 300 ILC0603ERR15J 150 5% 100 8 19 20 - 500 700 1.20 300 ILC0603ERR18J 180 5% 100 8 18 13 - 400 600 1.30 300 ILC0603ERR22J 220 5% 100 8 18 - - 400 500 1.50 300 ILC0603ERR27J 270 5% 100 8 19 - - 350 490 1.90 300 Revision: 28-Sep-17 Q TYPICAL Q MIN. 100 MHz 500 MHz 1000 MHz SRF (MHz) MIN. TYP. Document Number: 34145 1 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ILC-0603 www.vishay.com Vishay Dale DIMENSIONS in inches [millimeters] Ceramic Body 0.031 ± 0.006 [0.8 ± 0.15] 0.016 ± 0.008 [0.4 ± 0.2] 0.031 ± 0.006 [0.8 ± 0.15] 0.063 ± 0.006 [1.6 ± 0.15] DESCRIPTION ILC-0603 10 nH MODEL ±5% INDUCTANCE VALUE ER INDUCTANCE TOLERANCE e3 JEDEC® PACKAGE CODE LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I L C PRODUCT FAMILY Revision: 28-Sep-17 0 6 0 SIZE 3 E R PACKAGE CODE 1 0 N INDUCTANCE VALUE J TOL. Document Number: 34145 2 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 09-Jul-2021 1 Document Number: 91000