ILD1, ILD2, ILD5, ILQ1, ILQ2
www.vishay.com
Vishay Semiconductors
Optocoupler, Phototransistor Output (Dual, Quad Channel)
Dual Channel
Quad Channel
FEATURES
A
1
8 E
C
2
7 C
• Current transfer ratio at IF = 10 mA
C
3
6 C
• Isolation rated voltage 4420 VRMS
A
4
5 E
A
1
16 E
C
2
15 C
C
3
14 C
A
4
13 E
A
5
12 E
C
6
11 C
C
7
10 C
A
8
9 E
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
AGENCY APPROVALS
• UL 1577
• cUL 1577
• DIN EN 60747-5-5 (VDE 0884-5), available with option 1
• CQC
• CSA
i179012-1
• FIMKO
DESCRIPTION
• FIMKO
The ILD1, ILD2, ILD5, ILQ1, ILQ2 are optically coupled
isolated pairs employing GaAs infrared LEDs and silicon
NPN phototransistor. Signal information, including a DC
level, can be transmitted by the drive while maintaining a
high degree of electrical isolation between input and output.
The ILD1, ILD2, ILD5, ILQ1, ILQ2 are especially designed for
driving medium-speed logic and can be used to eliminate
troublesome ground loop and noise problems. Also these
couplers can be used to replace relays and transformers in
many digital interface applications such as CTR modulation.
The ILD1, ILD2, ILD5 have two isolated channels in a single
DIP package and the ILQ1, ILQ2 have four isolated channels
per package.
ORDERING INFORMATION
I
L
x
#
-
PART NUMBER
X
0
#
#
PACKAGE OPTION
TAPE
AND
REEL
x = D (dual) or Q (quad)
DIP-#
Option 6
7.62 mm
10.16 mm
Option 7
Option 9
T
> 0.7 mm
DUAL CHANNEL
AGENCY CERTIFIED /
PACKAGE
UL, CSA, CQC, BSI, FIMKO
DIP-8
DIP-8, 400 mil, option 6
SMD-8, option 7
> 0.1 mm
QUAD CHANNEL
CTR (%)
20 to 300
100 to 500
50 to 400
20 to 300
ILD1
ILD2
ILD5
-
-
-
ILD2-X006
-
-
-
ILD1-X007
ILD2-X007T (1)
-
-
-
SMD-8, option 9
-
DIP-16
-
ILD2-X009T
-
(1)
100 to 500
ILD5-X009
-
-
-
ILQ1
ILQ2
DIP-16, 400 mil, option 6
-
-
-
ILQ1-X006
-
SMD-16, option 7
-
-
-
ILQ1-X007
ILQ2-X007T (1)
SMD-16, option 9
-
-
-
ILQ1-X009T (1)
ILQ2-X009T (1)
Rev. 2.0, 10-Mar-2021
Document Number: 83646
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ILD1, ILD2, ILD5, ILQ1, ILQ2
www.vishay.com
Vishay Semiconductors
DUAL CHANNEL
AGENCY CERTIFIED /
PACKAGE
QUAD CHANNEL
CTR (%)
VDE, UL, CSA, CQC, BSI,
FIMKO
20 to 300
100 to 500
50 to 400
20 to 300
DIP-8
ILD1-X001
ILD2-X001
ILD5-X001
-
-
DIP-16
-
-
-
-
ILQ2-X001
DIP-16, 400 mil, option 6
-
-
-
-
ILQ2-X016
100 to 500
Notes
• Additional options may be possible, please contact sales office
(1) Also available in tubes; do not put T on end
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
VALUE
UNIT
INPUT
Reverse voltage
VR
6
V
Forward current
IF
60
mA
Surge current
IFSM
2.5
A
Power dissipation
Pdiss
100
mW
1.3
mW/°C
Derate linearly from 25 °C
OUTPUT
Collector emitter reverse voltage
Collector current
t < 1 ms
Power dissipation
ILD1
VCEO
50
V
ILQ1
VCEO
50
V
ILD2
VCEO
70
V
ILQ2
VCEO
70
V
ILD5
VCEO
70
V
IC
50
mA
IC
400
mA
Pdiss
200
mW
2.6
mW/°C
Derate lineary from 25 °C
COUPLER
Package power dissipation
Ptot
Derate linearly from 25 °C
250
mW
3.3
mW/°C
Storage temperature
Tstg
-40 to +150
°C
Operating temperature
Tamb
-40 to +100
°C
Junction temperature
Tj
100
°C
Tsld
260
°C
Soldering temperature (1)
2 mm from case bottom
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability
(1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for throught
hole devices (DIP)
Rev. 2.0, 10-Mar-2021
Document Number: 83646
2
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ILD1, ILD2, ILD5, ILQ1, ILQ2
www.vishay.com
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Forward voltage
IF = 60 mA
VF
-
1.25
1.65
V
Reverse current
VR = 6 V
IR
-
0.01
10
μA
INPUT
Capacitance
VR = 0 V, f = 1 MHz
CO
-
25
-
pF
TthJL
-
750
-
K/W
VCE = 5 V, f = 1 MHz
CCE
-
6.8
-
pF
VVCE = 10 V
ICEO
-
5
50
nA
IC = 1 mA, IB = 20 μA
VCESAT
-
0.25
0.4
V
Thermal resistance, junction to lead
OUTPUT
Collector emitter capacitance
Collector emitter leakage current
Saturation voltage, collector emitter
DC forward current gain
VCE = 10 V, IB = 20 μA
hFE
200
650
1800
DC forward current gain saturated
VCE = 0.4 V, IB = 20 μA
hFEsat
120
400
600
Rthjl
-
500
-
K/W
CIO
-
0.8
-
pF
Thermal resistance, junction to lead
COUPLER
Capacitance (input to output)
VIO = 0 V, f = 1 MHz
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
IF =10 mA, VCE = 0.4 V
IC/IF
(collector emitter saturated)
IF =10 mA, VCE = 10 V
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
%
ILD1
CTRCEsat
-
75
-
ILQ1
CTRCEsat
-
75
-
%
ILD2
CTRCEsat
-
170
-
%
ILQ2
CTRCEsat
-
170
-
%
ILD5
CTRCEsat
-
100
-
%
ILD1
CTRCE
20
80
300
%
ILQ1
CTRCE
20
80
300
%
ILD2
CTRCE
100
200
500
%
ILQ2
CTRCE
100
200
500
%
ILD5
CTRCE
50
130
400
%
VIOTM
450
t1, t2
t3 , t4
ttest
tstres
400
Phototransistor
PSO (mW)
350
300
= 1 s to 10 s
=1s
= 10 s
= 12 s
Vpd
250
VIOWM
VIORM
200
IR-diode
ISI (mA)
150
100
50
0
0
0
25
50
75
100
125
150
TSI - Safety Temperature (°C)
t3 ttest t4
175
13930
t1
tTr = 60 s
t2
t stres
t
Fig. 1 - Derating Diagram
Rev. 2.0, 10-Mar-2021
Fig. 2 - Test Pulse Diagram for Sample Test according
to DIN EN 60747-5-2 (VDE 0884); IEC 60747-5-5
Document Number: 83646
3
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ILD1, ILD2, ILD5, ILQ1, ILQ2
www.vishay.com
Vishay Semiconductors
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
NON-SATURATED
Current
Delay
Rise time
Storage
Fall time
Propagation H to L
Propagation L to H
Rev. 2.0, 10-Mar-2021
VCE = 5 V, RL = 75 Ω, 50 % of VPP
VCE = 5 V, RL = 75 Ω, 50 % of VPP
VCE = 5 V, RL = 75 Ω, 50 % of VPP
VCE = 5 V, RL = 75 Ω, 50 % of VPP
VCE = 5 V, RL = 75 Ω, 50 % of VPP
VCE = 5 V, RL = 75 Ω, 50 % of VPP
VCE = 5 V, RL = 75 Ω, 50 % of VPP
ILD1
IF
-
20
-
mA
ILQ1
IF
-
20
-
mA
ILD2
IF
-
5
-
mA
ILQ2
IF
-
5
-
mA
ILD5
IF
-
10
-
mA
ILD1
tD
-
0.8
-
μs
ILQ1
tD
-
0.8
-
μs
ILD2
tD
-
1.7
-
μs
ILQ2
tD
-
1.7
-
μs
ILD5
tD
-
1.7
-
μs
ILD1
tr
-
1.9
-
μs
ILQ1
tr
-
1.9
-
μs
ILD2
tr
-
2.6
-
μs
ILQ2
tr
-
2.6
-
μs
ILD5
tr
-
2.6
-
μs
ILD1
ts
-
0.2
-
μs
ILQ1
ts
-
0.2
-
μs
ILD2
ts
-
0.4
-
μs
ILQ2
ts
-
0.4
-
μs
ILD5
ts
-
0.4
-
μs
ILD1
tf
-
1.4
-
μs
ILQ1
tf
-
1.4
-
μs
ILD2
tf
-
2.2
-
μs
ILQ2
tf
-
2.2
-
μs
ILD5
tf
-
2.2
-
μs
ILD1
tPHL
-
0.7
-
μs
ILQ1
tPHL
-
0.7
-
μs
ILD2
tPHL
-
1.2
-
μs
ILQ2
tPHL
-
1.2
-
μs
ILD5
tPHL
-
1.1
-
μs
ILD1
tPLH
-
1.4
-
μs
ILQ1
tPLH
-
1.4
-
μs
ILD2
tPLH
-
2.3
-
μs
ILQ2
tPLH
-
2.3
-
μs
ILD5
tPLH
-
2.5
-
μs
Document Number: 83646
4
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ILD1, ILD2, ILD5, ILQ1, ILQ2
www.vishay.com
Vishay Semiconductors
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
SATURATED
Current
Delay
Rise time
Storage
Fall time
Propagation H to L
Propagation L to H
VCE = 0.4 V, RL = 1 kΩ, VCC = 5 V,
VTH = 1.5 V
VCE = 0.4 V, RL = 1 kΩ, VCC = 5 V,
VTH = 1.5 V
VCE = 0.4 V, RL = 1 kΩ, VCC = 5 V,
VTH = 1.5 V
VCE = 0.4 V, RL = 1 kΩ, VCC = 5 V,
VTH = 1.5 V
VCE = 0.4 V, RL = 1 kΩ, VCC = 5 V,
VTH = 1.5 V
VCE = 0.4 V, RL = 1 kΩ, VCC = 5 V,
VTH = 1.5 V
VCE = 0.4 V, RL = 1 kΩ, VCC = 5 V,
VTH = 1.5 V
ILD1
IF
-
20
-
mA
ILQ1
IF
-
20
-
mA
ILD2
IF
-
5
-
mA
ILQ2
IF
-
5
-
mA
ILD5
IF
-
10
-
mA
ILD1
tD
-
0.8
-
μs
ILQ1
tD
-
0.8
-
μs
ILD2
tD
-
1
-
μs
ILQ2
tD
-
1
-
μs
ILD5
tD
-
1.7
-
μs
ILD1
tr
-
1.2
-
μs
ILQ1
tr
-
1.2
-
μs
ILD2
tr
-
2
-
μs
ILQ2
tr
-
2
-
μs
ILD5
tr
-
7
-
μs
ILD1
ts
-
7.4
-
μs
ILQ1
ts
-
7.4
-
μs
ILD2
ts
-
5.4
-
μs
ILQ2
ts
-
5.4
-
μs
ILD5
ts
-
4.6
-
μs
ILD1
tf
-
7.6
-
μs
ILQ1
tf
-
7.6
-
μs
ILD2
tf
-
13.5
-
μs
ILQ2
tf
-
13.5
-
μs
ILD5
tf
-
20
-
μs
ILD1
tPHL
-
1.6
-
μs
ILQ1
tPHL
-
1.6
-
μs
ILD2
tPHL
-
5.4
-
μs
ILQ2
tPHL
-
5.4
-
μs
ILD5
tPHL
-
2.6
-
μs
ILD1
tPLH
-
8.6
-
μs
ILQ1
tPLH
-
8.6
-
μs
ILD2
tPLH
-
7.4
-
μs
ILQ2
tPLH
-
7.4
-
μs
ILD5
tPLH
-
7.2
-
μs
COMMON MODE TRANSIENT IMMUNITY (Tamb = 25 °C, unless otherwise specified)
SYMBOL
MIN.
TYP.
MAX.
UNIT
Common mode rejection, output high VCM = 50 VP-P, RL = 1 kΩ, IF = 0 mA
PARAMETER
CMH
-
5000
-
V/μs
Common mode rejection, output low
CML
-
5000
-
V/μs
CCM
-
0.01
-
pF
Common mode coupling capacitance
Rev. 2.0, 10-Mar-2021
TEST CONDITION
VCM = 50 VP-P, RL = 1 kΩ, IF = 10 mA
Document Number: 83646
5
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ILD1, ILD2, ILD5, ILQ1, ILQ2
www.vishay.com
Vishay Semiconductors
SAFETY AND INSULATION RATINGS
PARAMETER
TEST CONDITION
Climatic classification
SYMBOL
VALUE
According to IEC 68 part 1
UNIT
40/100/21
Comparative tracking index
CTI
175
VISO
4420
VRMS
Maximum transient isolation voltage
VIOTM
10 000
Vpeak
Maximum repetitive peak isolation voltage
VIORM
890
Vpeak
VIO = 500 V, Tamb = 25 °C
RIO
≥ 1012
Ω
VIO = 500 V, Tamb = 100 °C
RIO
≥ 1011
Ω
Output safety power
PSO
400
mW
Input safety current
ISI
275
mA
Safety temperature
TS
175
°C
≥7
mm
≥7
mm
≥ 0.4
mm
Maximum rated withstanding isolation voltage
t = 1 min
Isolation resistance
Creepage distance
Clearance distance
Insulation thickness
DTI
Note
• As per IEC 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with
the safety ratings shall be ensured by means of protective circuits
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
VCC = 5 V
VCC = 5 V
f = 10 KHz,
DF = 50 %
RL
I F = 10 mA
VO
f = 10 kHz,
DF = 50 %
VO
IF = 10 mA
RL = 75 Ω
iild1_03
iild1_01
Fig. 3 - Non-Saturated Switching Schematic
Fig. 5 - Saturated Switching Schematic
IF
IF
tD
t PHL
VO
VO
tPLH
tS
tR
t PLH
VTH = 1.5 V
50 %
t PHL
iild1_02
tD
tR
Fig. 4 - Non-Saturated Switching Timing
Rev. 2.0, 10-Mar-2021
tS
tF
tF
iild1_04
Fig. 6 - Saturated Switching Timing
Document Number: 83646
6
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ILD1, ILD2, ILD5, ILQ1, ILQ2
www.vishay.com
Vishay Semiconductors
1.5
1.3
TA = - 55 °C
1.2
TA = 25 °C
1.1
1.0
0.9
TA = 100 °C
0.8
1
iild1_05
10
CTRce(sat) V = 0.4 V
CE
T = 70 °C
A
NCTR
0.5
NCTR(SAT)
100
I F - Forward Current (mA)
0.1
iild1_08
Fig. 7 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
100
1.5
VCE = 10 V, IF = 10 mA, TA = 25 °C
NCTR - Normalized CTR
Normalized to:
VCE = 10 V,IF = 10 mA
CTRce(sat)VCE = 0.4 V
NCTR
0.5
NCTR (SAT)
0.0
0.1
1
iild1_06
10
CTRce(sat) VCE = 0.4 V
1.0
TA = 85 °C
NCTR
0.5
NCTR(SAT)
0.0
0.1
100
I F - LED Current (mA)
1
iild1_09
Fig. 8 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
10
100
IF - LED Current (mA)
Fig. 11 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
35
1.5
Normalized to:
ICE - Collector Current (mA)
CTRNF - Normalized CTR Factor
10
Normalized to:
TA = 25 °C
VCE =10V, IF = 10 mA,TA = 25 °C
CTRce(sat) VCE = 0.4 V
1.0
1
IF - LED Current (mA)
Fig. 10 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
1.5
1.0
A
1.0
0.0
0.7
0.1
CTRNF - Normalized CTR Factor
Normalized to:
V = 10 V, I = 10 mA
CE
F
T = 25 °C
CTR - Normalized CTR Factor
VF - Forward Voltage (V)
1.4
TA = 50 °C
NCTR
0.5
NCTR (SAT)
0.0
0.1
iild1_07
25
50 °C
20
15
70 °C
25 °C
85 °C
10
5
0
1
10
0
100
I F - LED Current (mA)
Fig. 9 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
Rev. 2.0, 10-Mar-2021
30
iild1_10
10
20
30
40
50
60
I - LED Current (mA)
F
Fig. 12 - Collector Emitter Current vs. Temperature and LED Current
Document Number: 83646
7
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ILD1, ILD2, ILD5, ILQ1, ILQ2
www.vishay.com
tpLH - Propagation Low-High (µs)
105
I CEO - Collector Emitter (nA)
104
103
102
Vce = 10 V
101
Typical
100
10- 1
10- 2
- 20
0
20
40
60
80
100
tpHL
2.0
10
1.5
tpLH
1
0.1
1
10
1.0
100
R L - Collector Load Resistor (kΩ)
iild1_12
Fig. 13 - Collector Emitter Leakage Current vs.Temperature
2.5
TA = 25 °C, IF = 10 mA
Vcc = 5 V, Vth = 1.5 V
100
TA - Ambient Temperature (°C)
iild1_11
1000
tpHL - Propagation High-Low (µs)
Vishay Semiconductors
Fig. 14 - Propagation Delay vs. Collector Load Resistor
PACKAGE DIMENSIONS in millimeters
Pin one ID
4
3
2
1
5
6
7
8
6.645 ± 0.165
ISO method A
9.77 ± 0.14
0.95 ± 0.19
7.62 typ.
0.79
4° typ.
3.555 ± 0.255
6.095 ± 0.255
1.27
10°
0.70 ± 0.19
0.51 ± 0.05
3.045 ± 0.255
3° to 9°
2.54 typ.
0.25 ± 0.05
Rev. 2.0, 10-Mar-2021
i178006
Document Number: 83646
8
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ILD1, ILD2, ILD5, ILQ1, ILQ2
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters
Pin one ID
8
7
6
5
4
3
2
1
6.48
6.81
9
10
11
12
13
14
15
16
ISO method A
19.77
20.07
0.76
1.14
0.79
7.62 typ.
3.30
3.81
10°
typ.
4°
0.51
0.89
0.46
0.56
2.54 typ.
3° to 9°
1.27
i178007
2.79
3.30
0.20
0.30
Option 6
Option 7
Option 9
10.36
9.96
7.62 typ.
9.53
10.03
7.8
7.4
5.84
6.35
7.62 ref.
0.7
4.6
4.1
0.102
0.249
8 min.
0.25 typ.
0.51
1.02
0.35
0.25
8.4 min.
15° max.
8 min.
10.16
10.92
10.3 max.
0.030 (0.76)
0.100 (2.54)
R 0.010 (0.25)
0.070 (1.78)
0.315 (8.00) min.
0.060 (1.52)
0.435 (11.05)
0.030 (0.76)
0.100 (2.54)
R 0.010 (0.25)
0.070 (1.78)
0.315 (8.00) min.
0.060 (1.52)
0.435 (11.05)
18450-9
PACKAGE MARKING (example)
ILD2
V YWW H 68
ILQ2
V YWW H 68
Notes
• Only option 1 and 7 reflected in the package marking
• The VDE logo is only marked on option 1 parts
• Tape and reel suffix (T) is not part of the package marking
Rev. 2.0, 10-Mar-2021
Document Number: 83646
9
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000