ILD205T, ILD206T, ILD207T, ILD211T, ILD213T
www.vishay.com
Vishay Semiconductors
Optocoupler, Phototransistor Output, Dual Channel,
SOIC-8 Package
FEATURES
A1
8C
• Two channel coupler
C2
7E
• SOIC-8 surface mountable package
A3
6C
• Standard lead spacing of 0.05"
C4
5E
• Available only on tape and reel option
(conforms to EIA standard 481-2)
i179018-2
i179025
• Isolation test voltage, 4000 VRMS
• Compatible with dual wave, vapor phase and IR reflow
soldering
DESCRIPTION
The ILD205T, ILD206T, ILD207T, ILD211T, and ILD213T are
optically coupled pairs with a gallium arsenide infrared LED
and a silicon NPN phototransistor. Signal information,
including a DC level, can be transmitted by the device while
maintaining a high degree of electrical isolation between
input and output. The ILD205T, ILD206T, ILD207T, ILD211T,
and ILD213T come in a standard SOIC-8 small outline
package for surface mounting which makes it ideally suited
for high density applications with limited space. In addition
to eliminating through-holes requirements, this package
conforms to standards for surface mounted devices.
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
AGENCY APPROVALS
• UL1577, file no. E52744 system code Y
• cUL - file no. E52744, equivalent to CSA bulletin 5A
A specified minimum and maximum CTR allows a narrow
tolerance in the electrical design of the adjacent circuits. The
high BVCEO of 70 V gives a higher safety margin compared
to the industry standard of 30 V.
ORDERING INFORMATION
SIOC-8
I
L
D
2
#
#
T
PART NUMBER
6.1 mm
CTR (%)
AGENCY CERTIFIED/PACKAGE
10 mA
UL, cUL
40 to 80
63 to 125
100 to 200
20
100
SOIC-8
ILD205T
ILD206T
ILD207T
ILD211T
ILD213T
Rev. 2.1, 23-Oct-15
Document Number: 83647
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ILD205T, ILD206T, ILD207T, ILD211T, ILD213T
www.vishay.com
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
Peak reverse voltage
VR
Peak pulsed current
1 μs, 300 pps
Continuous forward current per channel
6
V
1
A
IF
30
mA
Pdiss
50
mW
Collector emitter breakdown voltage
BVCEO
70
V
Emitter collector breakdown voltage
BVECO
7
V
Pdiss
125
mW
Ptot
350
mW
Power dissipation
OUTPUT
Power dissipation per channel
COUPLER
Total package dissipation ambient
(2 LEDs and 2 detectors, 2 channels)
Storage temperature
Tstg
-55 to +150
°C
Operating temperature
Tamb
-55 to +100
°C
Soldering time from 260 °C (1)
Tsld
10
s
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1) Refer to reflow profile for soldering conditions for surface mounted devices.
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Forward voltage
IF = 10 mA
VF
-
1.2
1.55
V
Reverse current
VR = 6 V
IR
-
0.1
100
μA
Capacitance
VR = 0 V
CO
-
25
-
pF
Collector emitter breakdown voltage
IC = 10 μA
BVCEO
70
-
-
V
Emitter collector breakdown voltage
IE = 10 μA
BVECO
7
-
-
V
VCE = 10 V, IF = 0 A
ICEO
-
5
50
nA
VCE = 0 V
CCE
-
10
-
pF
IF = 10 mA, IC = 2.5 mA
VCEsat
-
-
0.4
V
CIO
-
0.5
-
pF
INPUT
OUTPUT
Collector emitter leakage current
Collector emitter capacitance
COUPLER
Collector emitter saturation voltage
Capacitance (input to output)
Note
• Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering
evaluations. Typical values are for information only and are not part of the testing requirements.
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
VCE = 5 V, IF = 10 mA
IC/IF
VCE = 5 V, IF = 1 mA
Rev. 2.1, 23-Oct-15
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
ILD205T
CTRDC
40
ILD206T
CTRDC
63
-
80
%
-
125
ILD207T
CTRDC
%
100
-
200
ILD211T
%
CTRDC
20
-
-
%
ILD213T
CTRDC
100
-
-
%
ILD205T
CTRDC
13
30
-
%
ILD206T
CTRDC
22
45
-
%
ILD207T
CTRDC
34
70
-
%
Document Number: 83647
2
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ILD205T, ILD206T, ILD207T, ILD211T, ILD213T
www.vishay.com
Vishay Semiconductors
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Delay time
VS = 5 V, IC = 2 mA, RL = 100 ,
(see figure 1)
td
-
3
-
μs
Rise time
VS = 5 V, IC = 2 mA, RL = 100 ,
(see figure 1)
tr
-
3
-
μs
Fall time
VS = 5 V, IC = 2 mA, RL = 100 ,
(see figure 1)
tf
-
4.7
-
μs
Storage time
VS = 5 V, IC = 2 mA, RL = 100 ,
(see figure 1)
ts
-
0.3
-
μs
Turn-on time
VS = 5 V, IC = 2 mA, RL = 100 ,
(see figure 1)
ton
-
6
-
μs
Turn-off time
VS = 5 V, IC = 2 mA, RL = 100 ,
(see figure 1)
toff
-
5
-
μs
Turn-on time
VS = 5 V, IF = 10 mA, RL = 1 k,
(see figure 2)
ton
-
3
-
μs
Turn-off time
VS = 5 V, IF = 10 mA, RL = 1 k,
(see figure 2)
toff
-
10
-
μs
IF
IF
+5V
IF
0
0
I C = 2 mA; adjusted through
input amplitude
R G = 50 Ω
tp
= 0.01
T
t p = 50 µs
Channel I
Channel II
50 Ω
Oscilloscope
R L = 1 MΩ
C L = 20 pF
100 Ω
Fig. 1 - Test Circuit, Non-Saturated Operation
IF
t
100 %
90 %
10 %
0
tr
td
t on
tp
td
tr
t on (= td + tr)
95 10804
tp
IC
Pulse duration
Delay time
Rise time
Turn-on time
ts
tf
t off
ts
tf
t off (= ts + tf)
t
Storage time
Fall time
Turn-off time
96 11698
Fig. 3 - Switching Times
+5V
I F = 10 mA
0
IC
R G = 50 Ω
tp
= 0.01
T
t p = 50 µs
Channel I
Channel II
50 Ω
Oscilloscope
R L ≥ 1 MΩ
C L ≤ 20 pF
1 kΩ
95 10843
Fig. 2 - Test Circuit, Saturated Operation
Rev. 2.1, 23-Oct-15
Document Number: 83647
3
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ILD205T, ILD206T, ILD207T, ILD211T, ILD213T
www.vishay.com
Vishay Semiconductors
SAFETY AND INSULATION RATINGS
PARAMETER
TEST CONDITION
Climatic classification
SYMBOL
VALUE
According to IEC 68 part 1
UNIT
55/100/21
Comparative tracking index
CTI
175
Tested withstanding isolation voltage
According to UL1577, t = 1 s
VISO
4000
Maximum transient isolation voltage
According to DIN EN 60747-5-5
VIOTM
6000
Vpeak
Maximum repetitive peak isolation voltage
According to DIN EN 60747-5-5
VIORM
560
Vpeak
Tamb = 25 °C, VIO = 500 V
RIO
1012
Tamb = 100 °C, VIO = 500 V
RIO
1011
Output safety power
PSO
350
mW
Input safety current
ISI
150
mA
TS
165
°C
4
mm
Isolation resistance
Input safety temperature
Creepage distance
DIP-6, option 6
Clearance distance
DIP-6, option 6
Insulation thickness
VRMS
4
mm
0.2
mm
Note
• As per IEC 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with
the safety ratings shall be ensured by means of protective circuits.
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
1.5
Tamb = 0 °C
1.4
Tamb = -55 °C
1.3
1.2
1.1
Tamb = 25 °C
Tamb = 50 °C
Tamb = 75 °C
1.0
0.9
IF = 0 mA
ICE0 - Leakage Current (nA)
VF - Forward Voltage (V)
1.6
1000
VCE = 40 V
10
VCE = 12 V
VCE = 24 V
0.1
0.8
Tamb = 100 °C
0.7
0.1
1
10
100
0.001
-60 -40 -20
Fig. 4 - Forward Voltage vs. Forward Current
40
60
80
100
30
20
IC - Collector Current (mA)
IC - Collector Current (mA)
20
Fig. 6 - Leakage Current vs. Ambient Temperature
25
IF = 30 mA
15
IF = 20 mA
10
IF = 15 mA
IF = 10 mA
5
IF = 5 mA
0
2
4
6
8
IF = 25 mA
20
15
IF = 10 mA
10
IF = 5 mA
5
IF = 2 mA
IF = 1 mA
0
10
VCE - Collector Emitter Voltage (NS) (V)
Fig. 5 - Collector Current vs. Collector Emitter Voltage
(non-saturated)
Rev. 2.1, 23-Oct-15
25
0
0
22327
0
Tamb - Ambient Temperature (°C)
IF - Forward Current (mA)
22329
0.1
0.2
0.3
0.4
VCE - Collector Emitter Voltage (sat) (V)
Fig. 7 - Collector Current vs. Collector Emitter Voltage (saturated)
Document Number: 83647
4
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ILD205T, ILD206T, ILD207T, ILD211T, ILD213T
Vishay Semiconductors
1.2
1.2
1.0
NCTR - Normalized CTR (sat)
NCTR - Normalized CTR (non-sat.)
www.vishay.com
IF = 10 mA
0.8
0.6
IF = 1 mA
0.4
0.2
Normalized to CTR value:
IF = 10 mA, VCE = 5 V, Tamb = 25 °C
0
-60 -40 -20
0
20
40
60
0.8
0.4
Tamb = 25 °C
0.2
Tamb = 75 °C
Tamb = 100 °C
0
80 100 120
0.1
1
10
100
IF - Forward Current (mA)
Fig. 8 - Normalized CTR (saturated) vs. Ambient Temperature
Fig. 11 - Normalized CTR (saturated) vs. Forward Current
1.0
1000
0.8
ton, toff - Switching Time (μs)
NCTR - Normalized CTR (sat.)
Tamb = -55 °C
0.6
Tamb - Ambient Temperature (°C)
IF = 10 mA
0.6
IF = 1 mA
0.4
0.2
Normalized to CTR value:
IF = 10 mA, VCE = 5 V, Tamb = 25 °C
VCE = 5 V, IF = 10 mA
100
toff (μs)
10
ton (μs)
1
0
0.1
0
20
40
60
80 100 120
Tamb - Ambient Temperature (°C)
Fig. 9 - Normalized CTR (non-saturated) vs. Ambient Temperature
1.2
Tamb = 0 °C
1.0
Tamb = -55 °C
Tamb = 25 °C
0.8
0.6
Tamb = 75 °C
Tamb = 100 °C
0.4
Normalized to:
IF = 10 mA, VCE = 5 V,
Tamb = 25 °C
0.2
0
0.1
1
10
100
IF - Forward Current (mA)
Fig. 10 - Normalized CTR (non-saturated) vs. Forward Current
Rev. 2.1, 23-Oct-15
0
5
10
15
20
RL - Load Resistance (kΩ)
22336
Fig. 12 - Switching Time vs. Load Resistance
Package Power Dissipation (mW)
-60 -40 -20
NCTR - Normalized CTR (NS)
Tamb = 0 °C
VCE = 0.4 V
Normalized to:
IF = 10 mA,
VCE = 5 V,
Tamb = 25 °C
1.0
400
350
Dual channel
300
250
200
150
Single channel
100
50
0
-55
-30
-5
20
45
70
95
120
Tamb - Ambient Temperature (°C)
Fig. 13 - Power Dissipation vs. Ambient Temperature
Document Number: 83647
5
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ILD205T, ILD206T, ILD207T, ILD211T, ILD213T
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS (in millimeters)
PACKAGE MARKING (example)
D205
V YWW Y 68
Note
• Tape and reel suffix (T) is not part of the package marking.
Rev. 2.1, 23-Oct-15
Document Number: 83647
6
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ILD205T, ILD206T, ILD207T, ILD211T, ILD213T
www.vishay.com
Vishay Semiconductors
TAPE AND REEL PACKAGING FOR DUAL CHANNELS
Selected dual SOIC8 optocouplers are available in tape and
reel format. To order surface mount ILD2XX optocoupler on
tape and reel, add a suffix “T” after the part number, i.e.,
ILD207T.
(in millimeters)
Note
(1) Select dual channel devices are available in the shorter SOIC-8
package and will be taped according to the single channel
taping specification
The tape is 16 mm and is wound on a 33 cm reel. There are
2000 parts per reel. Taped and reeled dual SOIC8
optocouplers conform to EIA-481-2 and IEC 60286-3.
4 ± 0.1
(1.57 ± 0.004)
2 ± 0.05 (0.079 ± 0.002)
1.5 (0.059) min.
Pin 1 and
top of component
(1)
10 pitch cumulative
tolerance on tape
± 0.2 (0.008)
0.3 (0.012) max.
Top
cover
tape
1.75 ± 0.1
(0.069 ± 0.004)
6.6 (0.26)
7.5 ± 0.05
(0.300 ± 0.002)
16.0 ± 0.3
(0.630 ± 0.012)
3.8 (0.15)
6.35 (0.25)
13.3 (0.523)
8.0 (0.315)
0.1 (0.004) max.
Center lines
of cavity
Embossment
18004
1.5 (0.059)
Direction of feed
Fig. 14
SOLDER PROFILE
HANDLING AND STORAGE CONDITIONS
ESD level: HBM class 2
300
Temperature (°C)
max. 260 °C
245 °C
255 °C
240 °C
217 °C
250
Floor life: unlimited
Conditions: Tamb < 30 °C, RH < 85 %
Moisture sensitivity level 1, according to J-STD-020
200
max. 30 s
150
max. 100 s
max. 120 s
100
max. ramp down 6 °C/s
50
max. ramp up 3 °C/s
0
0
19841
50
100
150
200
250
300
Time (s)
Fig. 15 - Lead (Pb)-free Reflow Solder Profile
according to J-STD-020
Rev. 2.1, 23-Oct-15
Document Number: 83647
7
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
工商网监
湘ICP备2023018690号
