ILD755-2X007T

IL755, ILD755 www.vishay.com Vishay Semiconductors Optocoupler, Photodarlington Output, AC Input, High Gain (Single, Dual Channel) ILD755 has two isolated channels in a single DIP package. A/C 1 6 B C/A 2 5 C NC 3 4 E A 1 8 E C 2 7 C C 3 6 C APPLICATIONS A 4 5 E • Designed for applications monitoring of AC signals FEATURES • AC or polarity insensitive inputs • Built-in reverse polarity input protection • Industry standard DIP package • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 requiring detection or AGENCY APPROVALS i179037-1 • UL / cUL 1577 LINKS TO ADDITIONAL RESOURCES • DIN EN 60747-5-5 (VDE 0884-5) for: - IL755 - ILD755 Related Documents • CSA DESCRIPTION • CQC GB8898 / CQC GB4943.1 The IL755, ILD755 are bidirectional input optically coupled isolators. They consist of two gallium arsenide infrared emitting diodes coupled to a silicon NPN photodarlington per channel. • BSI The IL755 is single channel Darlington optocoupler. The ORDERING INFORMATION I L x 7 5 5 - PART NUMBER # CTR BIN X 0 # PACKAGE OPTION # T TAPE AND REEL Option 7 DIP-# 7.62 mm > 0.7 mm CTR (%) AGENCY CERTIFIED / PACKAGE UL, cUL, CSA, CQC DIP-# SMD-#, option 7 VDE, UL, cUL, CSA, CQC DIP-# SMD-#, option 7 SINGLE CHANNEL, 6 PIN DUAL CHANNEL, 8 PIN ± 2 mA ± 1 mA ± 2 mA ≥ 750 ≥ 1000 ≥ 750 ± 1 mA ≥ 1000 IL755-1 IL755-2 ILD755-1 ILD755-2 IL755-1X007 IL755-2X007T - ILD755-2X007T ≥ 750 ≥ 1000 ≥ 750 ≥ 1000 IL755-1X001 - - - - - ILD755-1X017 - Note • Additional options may be possible, please contact sales office Rev. 1.7, 10-Mar-2021 Document Number: 83641 1 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL755, ILD755 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT INPUT Forward continuous current Power dissipation IF 60 mA Pdiss 100 mW 1.33 mW/°C Derate linearly from 25°C OUTPUT Collector emitter breakdown voltage BVCEO 60 V Collector base breakdown voltage BVCBO 60 V IL755-1 200 mW IL755-2 200 mW 150 mW Power dissipation ILD755-1 Derate linearly from 25°C Pdiss ILD755-2 150 mW IL755-1 2.6 mW/°C IL755-2 2.6 mW/°C ILD755-1 2.0 mW/°C ILD755-2 2.0 mW/°C IL755-1 250 mW IL755-2 250 mW 400 mW COUPLER Total power dissipation ILD755-1 Derate linearly from 25 °C Ptot ILD755-2 400 mW IL755-1 3.0 mW/°C IL755-2 3.0 mW/°C ILD755-1 3.0 mW/°C 3.0 mW/°C Storage temperature ILD755-2 Tstg -55 to +150 °C Operating temperature Tamb -55 to +100 °C 10 s Lead soldering time at 260 °C Note • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL IF = ± 10 mA VF MIN. TYP. MAX. UNIT 1.2 1.5 V INPUT Forward voltage OUTPUT Collector emitter breakdown voltage IC = 1.0 mA BVCEO 60 75 Collector base breakdown voltage IC = 10 μA BVCBO 60 90 VCE = 10 V, IF = 0 A ICEO IC = 10 mA, IF = ± 10 mA VCEsat Collector emitter leakage current 10 V V 100 nA 1 V COUPLER Collector emitter saturation voltage Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements Rev. 1.7, 10-Mar-2021 Document Number: 83641 2 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL755, ILD755 www.vishay.com Vishay Semiconductors CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER Current transfer ratio TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT IF = ± 2 mA, VCE = 5.0 V IL755-1 CTR 750 - - % IF = ± 2 mA, VCE = 5.0 V ILD755-1 CTR 750 - - % IF = ± 1 mA, VCE = 5.0 V IL755-2 CTR 1000 - - % IF = ± 1 mA, VCE = 5.0 V ILD755-2 CTR 1000 - - % SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Rise time TEST CONDITION VCC = 10 V, IF = ± 2 mA, RL = 100 Ω Fall time VCC = 10 V, IF = ± 2 mA, RL = 100 Ω Rise time VCC = 10 V, IF = ± 1 mA, RL = 100 Ω Fall time VCC = 10 V, IF = ± 1 mA, RL = 100 Ω PART SYMBOL MIN. TYP. MAX. UNIT IL755-1 tr - 50 - μs ILD755-1 tr - 50 - μs IL755-1 tf - 50 - μs ILD755-1 tf - 50 - μs IL755-2 tr - 70 - μs ILD755-2 tr - 70 - μs IL755-2 tf - 70 - μs ILD755-2 tf - 70 - μs SAFETY AND INSULATION RATINGS PARAMETER Climatic classification TEST CONDITION Comparative tracking index Maximum rated withstanding isolation voltage SYMBOL According to IEC 68 part 1 CTI UNIT 175 VISO 4420 VRMS Maximum transient isolation voltage VIOTM 10 000 Vpeak Maximum repetitive peak isolation voltage VIORM 890 Vpeak VIO = 500 V, Tamb = 25 °C RIO ≥ 1012 Ω VIO = 500 V, Tamb = 100 °C RIO ≥ 1011 Ω PSO 400 mW Input safety current ISI 275 mA Safety temperature TS 175 °C Isolation resistance Output safety power t = 1 min VALUE 55 / 100 / 21 Creepage distance ≥7 mm Clearance distance ≥7 mm ≥ 0.4 mm Insulation thickness DTI Note • As per IEC 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits Rev. 1.7, 10-Mar-2021 Document Number: 83641 3 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL755, ILD755 www.vishay.com Vishay Semiconductors 60 40 NIce - Normalized (Ice) I F - LED Forward Current (mA) TYPICAL CHARACTERSITICS (Tamb = 25 °C, unless otherwise specified) 85 °C 20 25 °C 0 - 55 °C - 20 - 40 - 60 - 1.5 - 1.0 - 0.5 0.0 0.5 1.0 10 Normalized to: Vce = 5 V IF = 1 mA 2.5 2.0 Vce = 5 V 1.5 1.0 0.5 100 10 1 Fig. 4 - Normalized Non-Saturated and Saturated ICE vs. LED Current NIce - Normalized Ice NCTRce - Normalized (CTRce) 0.1 IF - LED Current (mA) 4.0 3.0 1 iil755_04 Fig. 1 - LED Forward Current vs. Forward Voltage 3.5 Vce = 5 V Vce = 1 V 0.01 0.1 1.5 VF - LED Forward Voltage (V) iil755b_01 100 Normalized to: Vce = 5 V IF = 2 mA 10 Vce = 1 V 1 Normalized to: IF = 10 mA Vce = 5 V Vce = 5 V Vce = 1 V 0.1 0.01 0.001 0.0 0.1 1 10 100 0.1 IF - LED Current (mA) iil755_02 100 10 1 IF - LED Current (mA) iil755_05 Fig. 2 - Normalized Non-Saturated and Saturated CTRCE vs. LED Current 10 000 Normalized to: 2.5 Vce = 5 V IF = 2 mA 2.0 1.5 Vce = 5 V 1.0 0.5 Vce = 1 V hFE - Forward Transfer Gain NCTRce - Normalized CTRce 3.0 Fig. 5 - Normalized Non-Saturated and Saturated Collector-Emitter Current vs. LED Current Vce = 5 V 8000 6000 4000 Vce = 1 V 2000 0.0 0 0.1 1 10 IF - LED Current (mA) iil755_03 Fig. 3 - Normalized Non-Saturated and Saturated CTRCE vs. LED Current Rev. 1.7, 10-Mar-2021 0.01 100 iil755_06 0.1 1 10 100 Ib - Base Current (µA) Fig. 6 - Non-Saturated and Saturated hFE vs. Base Current Document Number: 83641 4 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL755, ILD755 tpLH - Low/High Propagation Delay (µs) www.vishay.com Vishay Semiconductors 80 IF Vcc = 5 V Vth = 1.5 V 1.0 kΩ 60 220 Ω 40 VO tD tR 470 Ω t PLH 20 VTH = 1.5 V 100 Ω 0 0 10 5 15 IF - LED Current (mA) iil755_07 t PHL 20 tF tS iil755_09 Fig. 9 - Switching Waveform Fig. 7 - Low to High Propagation Delay vs. Collector Load Resistance and LED Current tpHL - High/Low Propagation Delay (µs) 20 VCC = 10 V 1 kΩ Vcc = 5 V Vth = 1.5 V 15 f = 10 kHz, DF = 50 % 10 RL VO 100 Ω 5 0 IF = 1 mA 0 iil755_08 5 10 15 20 IF - LED Current (mA) Fig. 8 - High to Low Propagation Delay vs. Collector Load Resistance and LED Current Rev. 1.7, 10-Mar-2021 iil755_10 Fig. 10 - Test Circuit, Saturated and Non-Saturated Operation Document Number: 83641 5 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IL755, ILD755 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 3 2 1 4 5 6 Pin one ID 6.4 ± 0.1 ISO method A 8.6 ± 0.1 7.62 typ. 1.2 ± 0.1 1 min. 3.555 ± 0.255 18° 4° typ. 2.95 ± 0.5 0.8 min. 0.85 ± 0.05 0.25 typ. 3° to 9° 0.5 ± 0.05 7.62 to 8.81 i178004 2.54 typ. Option 7 7.62 typ. Pin one ID 4 3 2 6.5 6.3 1 4.6 4.1 0.7 min. 6.645 ± 0.165 ISO method A 5 6 7 8.0 min. 8 8.4 min. 9.77 ± 0.14 10.3 max. 18447 0.95 ± 0.19 7.62 typ. 0.79 4° typ. 3.555 ± 0.255 6.095 ± 0.255 1.27 10° 0.70 ± 0.19 0.51 ± 0.05 3.045 ± 0.255 3° to 9° 2.54 typ. 0.25 ± 0.05 i178006 PACKAGE MARKING (example) IL755 V YWW H 68 Notes • The VDE logo is only marked on option 1 parts • Tape and reel suffix (T) is not part of the package marking Rev. 1.7, 10-Mar-2021 Document Number: 83641 6 For technical questions, contact: optocoupleranswers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000