IMBD4448-G3-18

IMBD4448-G www.vishay.com Vishay Semiconductors Small Signal Switching Diode FEATURES • Silicon epitaxial planar diode 3 • Fast switching diode in case SOT-23, especially suited for automatic insertion. • AEC-Q101 qualified available  (part number on request) 1 • Base P/N-G3 - green, commercial grade 2 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912        DESIGN SUPPORT TOOLS click logo to get started Models Available MECHANICAL DATA Case: SOT-23 Weight: approx. 8.1 mg Packaging codes / options: 18/10K per 13" reel (8 mm tape), 10K/box 08/3K per 7" reel (8 mm tape), 15K/box PARTS TABLE PART ORDERING CODE CIRCUIT CONFIGURATION TYPE MARKING REMARKS IMBD4448-G3-08 or IMBD4448-G3-18 Single AJ Tape and reel SYMBOL VALUE UNIT VR 75 V VRM 100 V f  50 Hz IF(AV) 150 mA t < 1 s and Tj = 25 °C IFSM 500 mA Ptot 350 mW SYMBOL VALUE UNIT RthJA 450 K/W Tj 150 °C Storage temperature range Tstg -65 to +150 °C Operating temperature range Top -55 to +150 °C IMBD4448-G ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Reverse voltage Peak reverse voltage Rectified current (average) half wave rectification with resistive load (1) Surge forward current Power dissipation (1) THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Thermal resistance junction to ambient air (1) Junction temperature Note (1) Device on fiberglass substrate, see layout on next page Rev. 1.3, 13-Feb-18 Document Number: 85883 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IMBD4448-G www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. IF = 5 mA VF 0.62 IF = 100 mA VF 1 V VR = 70 V IR 2500 nA VR = 70 V, Tj = 150 °C IR 50 μA VR = 25 V, Tj = 150 °C IR 30 μA VF = VR = 0 V CD 4 pF IF = 10 mA, iR = 1 mA, VR = 6 V, RL = 100  trr 4 ns Forward voltage Leakage current Diode capacitance Reverse recovery time TYP. MAX. UNIT 0.72 V LAYOUT FOR RthJA TEST Thickness:  Fiberglass 1.5 mm (0.059 in.) Copper leads 0.3 mm (0.012 in.) 7.5 (0.3) 3 (0.12) 1 (0.4) 2 (0.8) 1 (0.4) 12 (0.47) 15 (0.59) 2 (0.8) 0.8 (0.03) 5 (0.2) 1.5 (0.06) 5.1 (0.2) 17451 TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 100 10000 T j = 100 ° C 10 25 ° C 1 0.1 0.01 rf - Dynamic Forward Resistance (Ω) I F - Forward Current ( mA ) 1000 T j = 25 ° C f = 1 kHz 1000 100 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 18689 V F - Forward Voltage ( V ) Fig. 1 - Forward Current vs. Forward Voltage 18662 10 1 0.01 0.1 1 10 IF - Forward Current (mA) 100 Fig. 2 - Dynamic Forward Resistance vs. Forward Current Rev. 1.3, 13-Feb-18 Document Number: 85883 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IMBD4448-G Vishay Semiconductors CD (VR)/CD (0 V) - Relative Capacitance (pF) Ptot - Admissible Power Dissipation ( mW ) www.vishay.com 500 400 300 200 100 0 0 20 40 60 80 100 120 140 160180 200 1.0 0.9 0.8 0.7 0 Tamb - Ambient Temperature ( °C ) 18663 T j = 25 ° C f = 1 MHz 1.1 Fig. 3 - Admissible Power Dissipation vs. Ambient Temperature 2 4 6 8 10 VR - Reverse Voltage (V) 18664 Fig. 4 - Relative Capacitance vs. Reverse Voltage 100 Peak Forward Current (A) I FRM - Admissible Repetitive I 18709 10 ν = t p /T ν =0 tp 0. 1 T = 1/f p I FRM t T 0. 2 1 10 -5 0. 5 10 -4 10 -3 10 -2 10 -1 1 10 tp - Pulse Length (s) Fig. 5 - Admissible Repetitive Peak Forward Current vs. Pulse Duration Rev. 1.3, 13-Feb-18 Document Number: 85883 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IMBD4448-G www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): SOT-23 1.15 (0.045) o8 ° 0.2 (0.008) 0.098 (0.004) 0.175 (0.007) 0.1 (0.004) max. 0.550 ref. (0.022 ref.) 0.9 (0.035) 3.1 (0.122) 2.8 (0.110) 0.45 (0.018) 0.35 (0.014) 0.35 (0.014) 0° t 0.5 (0.020) 0.45 (0.018) 0.3 (0.012) 2.6 (0.102) 2.35 (0.093) Foot print recommendation: 1 (0.039) 0.9 (0.035) Document no.: 6.541-5014.01-4 Rev. 8 - Date: 23.Sept.2009 17418 0.9 (0.035) 0.7 (0.028) 2 (0.079) 1.43 (0.056) 1.20 (0.047) 0.45 (0.018) 0.35 (0.014) 1 (0.039) 0.9 (0.035) 0.95 (0.037) 0.95 (0.037) Rev. 1.3, 13-Feb-18 Document Number: 85883 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: IMBD4448-G3-18 IMBD4448-G3-08