IMC0603ER47NJ

Product is End of Life December 2015 IMC-0603 www.vishay.com Vishay Dale High Frequency, Surface Mount, Laser Spiral, Coated Inductors FEATURES STANDARD ELECTRICAL SPECIFICATIONS TEST FREQ. (MHz) RATED DC SRF DCR IND. MIN. MAX. CURRENT Q (mA) (1) (nH) TOL. L Q MIN. (MHz) () 1.0 0.3 nH, 0.2 nH 100 1000 30 6000 0.06 500 1.2 0.3 nH, 0.2 nH 100 1000 30 6000 0.06 500 1.5 0.3 nH, 0.2 nH 100 1000 30 6000 0.07 500 1.8 0.3 nH, 0.2 nH 100 1000 30 6000 0.08 500 2.2 0.3 nH, 0.2 nH 100 1000 30 6000 0.09 500 2.7 0.3 nH, 0.2 nH 100 1000 30 6000 0.10 500 3.3 0.3 nH, 0.2 nH 100 1000 30 5500 0.12 500 3.9 5% 100 1000 30 5500 0.15 450 4.7 5% 100 1000 30 4800 0.17 450 5.6 5% 100 1000 30 4600 0.19 430 6.8 5% 100 1000 30 3550 0.20 430 8.2 5% 100 1000 30 3500 0.28 400 10 5 %, 2 % 100 500 30 2800 0.32 400 12 5 %, 2 % 100 500 30 2800 0.35 400 15 5 %, 2 % 100 500 30 2500 0.41 350 18 5 %, 2 % 100 500 30 2300 0.45 350 22 5 %, 2 % 100 500 30 2000 0.50 300 27 5 %, 2 % 100 500 30 2000 0.55 300 33 5 %, 2 % 100 500 30 1800 0.60 300 39 5 %, 2 % 100 500 30 1800 0.80 300 47 5 %, 2 % 100 500 30 1800 0.95 250 56 5 %, 2 % 100 500 30 1800 1.20 250 68 5 %, 2 % 100 500 30 1500 1.30 250 82 5 %, 2 % 100 500 30 1500 1.50 250 100 5 %, 2 % 100 500 26 1300 1.80 200 120 5 %, 2 % 100 500 26 1200 3.00 130 150 5 %, 2 % 100 500 26 1100 4.50 100 180 5 %, 2 % 100 500 20 1000 6.50 80 220 5 %, 2 % 100 500 20 900 7.50 70 • Very small size • High self-resonant frequency values • High Q values relative to size at higher frequencies • Coated coil provides protection and moisture resistance • Compatible with vapor phase and infrared reflow soldering • Tape and reel packaging for automatic handling, 4000/reel, EIA-481 • L and Q value not affected by mounting orientation • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 ELECTRICAL SPECIFICATIONS Inductance Range: 1.0 nH to 220 nH Inductance and Tolerance: ± 0.3 nH for 1.0 nH to 3.3 nH, ± 5 % for 3.9 nH to 220 nH Operating Temperature: -40 °C to +100 °C Core Material: Ceramic TEST EQUIPMENT • Inductance and Q measured on HP4291B • SRF measured on HP8753E • DCR measured on HP4338B DIMENSIONS in inches [millimeters] 0.031 ± 0.008 [0.8 ± 0.20] 0.016 ± 0.008 [0.4 ± 0.20] 0.016 ± 0.004 [0.4 ± 0.10] 0.031 ± 0.006 [0.8 ± 0.15] 0.063 ± 0.008 [1.6 ± 0.20] Recommended Pad Layout 0.039 [1.0] 0.031 [0.8] Note (1) Value obtained when current flows and temperature has risen 15 °C 0.083 [2.1] DESCRIPTION 10 nH IMC-0603 MODEL ±5% INDUCTANCE VALUE ER INDUCTANCE TOLERANCE e3 JEDEC® PACKAGE CODE LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I M PRODUCT FAMILY Revision: 24-Jul-15 C 0 6 0 SIZE 3 E R PACKAGE CODE 1 0 N INDUCTANCE VALUE J TOL. Document Number: 34039 1 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000