IMC1008ER1R2J

IMC-1008 www.vishay.com Vishay Dale High Frequency, Surface Mount Inductors FEATURES • • • • STANDARD ELECTRICAL SPECIFICATIONS TEST FREQ. (MHz) Q MIN. L Q 3.3 0.3 nH 100 1000 50 6.8 5 % 100 1000 50 8.2 5 % 100 1000 50 10 5 % 100 1000 50 12 5 % 100 500 60 15 5 % 100 500 60 18 5 % 100 350 60 22 5 % 100 350 60 27 5 % 100 350 60 33 5 % 100 350 60 39 5 % 100 350 60 47 5 % 100 350 60 56 5 % 100 350 60 68 5 % 100 350 60 82 5 % 100 350 60 100 5 % 100 350 60 120 5% 25 100 45 150 5% 25 100 45 180 5% 25 100 45 220 5% 25 100 45 270 5% 25 100 45 330 5% 25 100 45 390 5% 25 100 45 470 5% 25 100 45 560 5% 25 100 45 680 5% 25 100 45 750 5% 25 100 45 820 5% 25 100 45 910 5% 25 100 45 1000 5 % 25 50 35 1200 5 % 7.96 7.96 20 1500 5 % 7.96 7.96 20 1800 5 % 7.96 7.96 20 2200 5 % 7.96 7.96 20 2700 5 % 7.96 7.96 20 3300 5 % 7.96 7.96 20 3900 5 % 7.96 7.96 20 4700 5 % 7.96 7.96 20 5600 5 % 7.96 7.96 20 6800 5 % 7.96 7.96 20 8200 5 % 7.96 7.96 20 10 000 5 % 2.52 2.52 15 12 000 5 % 2.52 2.52 15 15 000 5 % 2.52 2.52 15 18 000 5 % 2.52 2.52 15 22 000 5 % 2.52 2.52 15 27 000 5 % 2.52 2.52 15 33 000 5 % 2.52 2.52 15 39 000 5 % 2.52 2.52 15 47 000 5 % 2.52 2.52 15 IND. (nH) TOL. SRF DCR RATED DC MIN. MAX. CURRENT (mA) (MHz) ) 6000 0.06 1000 5500 0.06 1000 5500 0.06 1000 4300 0.08 1000 3600 0.08 1000 2700 0.08 1000 2700 0.10 1000 2500 0.10 1000 1800 0.10 1000 1700 0.10 1000 1500 0.10 1000 1500 0.10 1000 1350 0.12 1000 1300 0.15 1000 1100 0.18 1000 1100 0.18 1000 950 0.20 800 880 0.22 800 800 0.33 800 730 0.45 800 650 0.75 600 570 0.90 500 530 1.06 470 480 1.17 420 430 1.50 310 380 2.06 230 360 2.20 200 350 2.30 180 330 3.18 150 310 3.30 120 280 1.30 230 250 1.65 220 200 2.20 210 160 2.35 200 130 2.60 195 80 2.85 185 50 4.00 180 45 4.30 175 42 2.60 170 39 2.80 165 36 3.05 160 33 3.50 150 30 3.60 140 26 4.00 130 24 4.50 120 22 5.00 110 21 6.00 95 20 6.50 85 18 8.50 60 17 14.00 45 High self-resonant frequency values High Q values at higher frequencies Wirewound construction Compatible with vapor phase and infrared reflow soldering • Tape and reel packaging for automatic handling, 2000/reel • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 ELECTRICAL SPECIFICATIONS Inductance Range: 3.3 nH to 47 000 nH Inductance and Tolerance: 0.3 nH for 3.3 nH ± 5 % for 6.8 nH to 47 000 nH Operating Temperature: -40 °C to +125 °C Core Material: Ceramic from 3.3 nH to 1000 nH Ferrite from 1200 nH to 47 000 nH TEST EQUIPMENT • Inductance and Q measured on HP4286A • SRF measured on HP8753D DIMENSIONS in inches [millimeters] 0.098 ± 0.012 [2.50 ± 0.3] 0.079 ± 0.012 [2.00 ± 0.3] 0.020 ± 0.008 [0.50 ± 0.2] 0.063 ± 0.012 [1.60 ± 0.3] 0.02 [0.5] DESCRIPTION IMC-1008 10 nH MODEL ±5% INDUCTANCE VALUE e4 (1) ER INDUCTANCE TOLERANCE JEDEC® PACKAGE CODE LEAD (Pb)-FREE STANDARD Note (1) For parts within 3.3 nH to 910 nH please use e4 for JEDEC lead (Pb)-free standard. For parts within 1000 nH to 47 000 nH please use e3 for JEDEC lead (Pb)-free standard. GLOBAL PART NUMBER I M PRODUCT FAMILY Revision: 08-Jan-15 C 1 0 0 SIZE 8 E R PACKAGE CODE 1 0 N INDUCTANCE VALUE J TOL. Document Number: 34041 1 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IMC-1008 www.vishay.com Vishay Dale PERFORMANCE GRAPHS IMC-1008 120 100 3.3 nH Q 80 60 390 nH 40 100 nH 18 nH 20 0 1 47 nH 3900 nH 1000 nH 18 000 nH 100 FREQUENCY (MHz) 10 10 000 1000 100 000 18 000 nH INDUCTANCE (nH) 10 000 3900 nH 1000 nH 1000 390 nH 100 nH 100 47 nH 18 nH 10 3.3 nH 1 1 10 100 FREQUENCY (MHz) 1000 10 000 TAPE AND REEL SPECIFICATIONS in inches [millimeters] TAPE DIMENSIONS REEL DIMENSIONS 0.08 ± 0.02 [2.0 ± 0.5] RECOMMENDED PATTERN 0.08 ± 0.02 [2.5 ± 0.5] 0.51 ± 0.02 Ø [13.0 ± 0.5] 0.07 ± 0.002 [1.75 ± 0.05] 0.14 ± 0.002 [3.5 ± 0.05] 0.158 ± 0.004 0.08 ± 0.002 [4.0 ± 0.1] [2.0 ± 0.05] B 0.1 ± 0.002 [0.3 ± 0.05] A C 0.83 ± 0.03 Ø [21.0 ± 0.8] 7.0 ± 0.08 [178.0 ± 2.0] MODEL IMC-1008 Revision: 08-Jan-15 0.55 ± 0.04 [14.0 ± 1.0] UNITS PER REEL 2000 0.315 ± 0.008 [8.0 ± 0.2] T ± 0.002 A ± 0.004 0.158 ± 0.004 [± 0.1] B ± 0.004 [± 0.05] [4.0 ± 0.1] [± 0.1] MODEL A B T IMC-1008 0.087 [2.20] 0.110 [2.80] 0.071 [1.80] MODEL A B C IMC-1008 0.047 [1.20] 0.150 [3.80] 0.100 [2.54] Document Number: 34041 2 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000