IMC1210EB270K

IMC-1210 www.vishay.com Vishay Dale Wirewound, Surface-Mount Molded Inductors FEATURES STANDARD ELECTRICAL SPECIFICATIONS IND. (μH) TEST FREQ. SRF DCR Q (MHz) MIN. MAX. MIN. (MHz) () L&Q 50 30 1000 0.13 50 30 1000 0.14 50 30 1000 0.16 50 30 1000 0.18 50 30 1000 0.20 50 30 1000 0.22 50 30 1000 0.24 50 30 1000 0.27 50 30 1000 0.30 50 30 1000 0.33 50 30 1000 0.36 50 30 900 0.40 50 30 700 0.44 25.2 30 500 0.22 25.2 30 450 0.25 25.2 30 400 0.28 25.2 30 350 0.32 25.2 30 320 0.36 25.2 30 300 0.40 25.2 30 250 0.45 25.2 30 220 0.50 25.2 30 180 0.55 25.2 30 160 0.60 25.2 30 140 0.67 7.96 30 120 0.70 7.96 30 100 0.75 7.96 30 85 0.85 7.96 30 80 0.90 7.96 30 75 1.0 7.96 30 70 1.1 7.96 30 60 1.2 7.96 30 55 1.3 7.96 30 50 1.5 7.96 30 45 1.6 7.96 30 40 1.8 7.96 30 38 2.0 2.52 30 33 2.1 2.52 30 30 2.5 2.52 30 21 2.8 2.52 30 20 3.3 2.52 30 19 3.7 2.52 30 18 5.0 2.52 30 16 6.0 2.52 30 15 7.0 2.52 30 14 9.0 2.52 30 12 10.0 2.52 30 11 11.0 2.52 30 10 12.0 0.796 20 9 14.0 0.796 15 8 11.0 0.796 15 6.5 15.0 0.796 15 6 17.0 0.796 15 6 21.0 TOL. RATED DC CURRENT (mA) (1) 734 707 661 624 592 564 540 530 483 470 450 450 450 584 548 518 484 456 453 450 450 450 450 450 400 390 370 350 320 290 260 250 224 217 204 194 189 173 164 151 145 122 112 104 91 87 83 79 73 70 65 60 50 0.010 20 % 0.012 20 % 0.015 20 % 0.018 20 % 0.022 20 % 0.027 20 % 0.033 20 % 0.039 20 % 0.047 20 % 0.056 20 % 0.068 20 % 0.082 20 % 0.10 20 % 0.12 20 % 0.15 20 % 0.18 20 % 0.22 20 % 0.27 20 % 0.33 20 % 0.39 20 % 0.47 20 % 0.56 20 % 0.68 20 % 0.82 20 % 1.0 10 % 1.2 10 % 1.5 10 % 1.8 10 % 2.2 10 % 2.7 10 % 3.3 10 % 3.9 10 % 4.7 10 % 5.6 10 % 6.8 10 % 8.2 10 % 10 10 % 12 10 % 15 10 % 18 10 % 22 10 % 27 10 % 33 10 % 39 10 % 47 10 % 56 10 % 68 10 % 82 10 % 100 10 % 120 10 % 150 10 % 180 10 % 220 10 % Note (1) Rated DC current based on the maximum temperature rise, not to exceed 40 °C at +85 °C ambient • Printed marking • Molded construction provides superior strength and moisture resistance • Compatible with vapor phase and infrared reflow soldering • Tape and reel packaging for automatic handling, 2000/reel, EIA-481 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 ELECTRICAL SPECIFICATIONS Inductance range: 0.01 μH to 220 μH Special tolerances available upon request Operating temperature: -55 °C to +125 °C Coilform material: non-magnetic from 0.01 μH to 0.10 μH; powdered iron from 0.12 μH to 100 μH; ferrite from 120 μH to 220 μH TEST EQUIPMENT • HP4342A Q meter with Vishay Dale test fixture or equivalent • HP4191A RF impedance analyzer (for SRF measurements) • Wheatstone bridge DIMENSIONS in inches [millimeters] 0.087 ± 0.008 [2.21 ± 0.203] 0.030 [0.762] Typ. 0.006 [0.152] Ref. Typ. 0.040 [1.02] 0.126 ± 0.008 [3.20 ± 0.203] 0.028 ± 0.004 [0.711 ± 0.102] Typ. 0.098 ± 0.008 [2.49 ± 0.203] 0.073 [1.85] Ref. Guidelines for Parallel Component Printed Circuit Mounting Pads on IMC-1210-100 Chip Inductors 0.118 [3.0] 0.138 [3.5] 0.020 (1) [0.5] 0.118 [3.0] 0.039 [1.0] 0.070 [1.8] 0.039 [1.0] Note (1) Recommended spacing between components PART MARKING - Vishay Dale - Inductance code - Date code DESCRIPTION 10 μH IMC-1210 MODEL INDUCTANCE VALUE ± 10 % INDUCTANCE TOLERANCE ER PACKAGE CODE e3 JEDEC® LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I M PRODUCT FAMILY Revision: 10-Sep-2019 C 1 2 1 SIZE 0 E R PACKAGE CODE 1 0 INDUCTANCE VALUE 0 K TOL. Document Number: 34043 1 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 09-Jul-2021 1 Document Number: 91000