IMS05ERR33K

Not for New Designs IMS-5 Vishay Dale Inductors, Commercial, Molded, Shielded, Axial Leaded FEATURES ELECTRICAL SPECIFICATIONS Inductance Tolerance: ± 10 % standard, ± 5 % available Insulation Resistance: 1000 M: minimum per MIL-STD-202, method 302, test condition B Dielectric Withstanding Voltage: 1000 VAC per MIL-STD-202, method 301 (at sea level) Percent Coupling: 3 % maximum per MIL-PRF-15305 Operating Temperature: -55 °C to +105 °C Wide inductance range in small package Flame retardant coating Electromagnetic shield-finest shield available Precision performance, excellent reliability, sturdy construction • Epoxy molded construction provides superior moisture protection • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL SPECIFICATIONS Terminals: 5 lb pull per MIL-STD-202, method 211, test condition A Weight: IMS-5 = 0.85 g maximum ENVIRONMENTAL PERFORMANCE TEST • • • • CONDITIONS SPECIFICATIONS C MIL-STD-202, method 105 MATERIAL SPECIFICATIONS A-1 MIL-STD-202, method 107 Flammability - MIL-STD-202, method 111 Encapsulant: Epoxy Standard Terminals: #22 AWG, tinned copper Overload - MIL-PRF-15305 Low Temperature Storage - MIL-PRF-15305 Resistance to Soldering Heat A MIL-STD-202, method 210 Barometric Pressure Thermal Shock INDUCTANCE RANGE AND MILITARY STANDARD INDUCTANCE RANGE (μH) Resistance to Solvents - MIL-STD-202, method 215 MATERIAL MIN. MAX. CORE SHIELD 0.10 0.82 Phenolic Powdered iron 1.0 12 15 8200 Powdered iron Powdered iron Ferrite Ferrite DIMENSIONS in inches [millimeters] 1.44 ± 0.188 [36.57 ± 4.78] 0.025 ± 0.002 [0.635 ± 0.051] 0.410 ± 0.020 [10.41 ± 0.508] 0.162 ± 0.010 [4.11 ± 0.254] STANDARD ELECTRICAL SPECIFICATIONS IND. (μH) 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 TOL. (%) ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 Q MIN. 50 51 51 50 49 47 46 44 44 43 42 40 TEST FREQUENCY L AND Q (MHz) 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 25.0 SRF MIN. (MHz) (1) 250.0 250.0 250.0 250.0 250.0 250.0 250.0 250.0 235.0 210.0 190.0 180.0 DCR MAX. (:) 0.025 0.034 0.037 0.047 0.067 0.11 0.13 0.18 0.25 0.33 0.45 0.59 RATED DC CURRENT (mA) (2) 1790 1530 1470 1300 1100 855 780 670 565 490 420 370 INCREMENTAL CURRENT (mA) (3) - MODEL IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 Notes (1) Measured with full length lead (2) Rated DC current: Based on maximum temperature rise not to exceed 15 °C at +90 °C ambient (3) Incremental current: The minimum typical current at which the inductance will be decreased by 5 % from its initial zero DC value Document Number: 34048 Revison: 07-Feb-17 www.vishay.com For technical questions, contact: magnetics@vishay.com 1 Not for New Designs IMS-5 www.vishay.com Vishay Dale STANDARD ELECTRICAL SPECIFICATIONS IND. (μH) 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 TOL. (%) ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 ± 10 Q MIN. 44 44 44 44 44 44 44 44 44 44 50 50 50 55 45 45 45 45 45 50 50 50 50 50 50 55 55 55 55 55 55 60 60 60 60 60 60 45 45 45 45 45 45 45 45 44 40 40 TEST FREQUENCY L AND Q (MHz) 25.0 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 7.9 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.79 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 SRF MIN. (MHz) (1) 140.0 130.0 115.0 105.0 100.0 92.0 85.0 75.0 70.0 65.0 55.0 50.0 46.0 44.0 49.0 45.0 41.0 38.0 34.0 29.0 27.0 25.0 21.0 10.5 10.0 9.7 8.5 8.0 7.5 7.0 6.5 6.2 5.7 4.7 4.5 4.2 3.8 1.5 1.2 1.0 0.97 0.92 0.84 0.80 0.74 0.73 0.66 0.54 DCR MAX. (:) 0.07 0.10 0.12 0.14 0.19 0.28 0.35 0.40 0.55 0.72 1.02 1.32 1.62 2.00 0.80 0.89 0.96 1.19 1.37 1.93 2.11 2.23 2.70 2.44 3.12 3.6 4.1 4.4 5.0 5.8 6.4 7.4 9.5 10.5 11.8 13.0 17.5 22.1 26.5 29.9 33.8 47.3 53.0 73.8 81.6 98.9 111.0 119.0 INCREMENTAL CURRENT (mA) (3) 250.0 235.0 220.0 200.0 190.0 180.0 175.0 160.0 150.0 140.0 120.0 95.0 90.0 85.0 80.0 70.0 65.0 60.0 58.0 55.0 50.0 45.0 40.0 35.0 33.0 30.0 27.0 25.0 22.0 20.0 19.0 17.0 16.0 15.0 RATED DC CURRENT (mA) (2) 1070 895 815 775 650 535 480 450 380 335 280 250 220 200 315 300 290 260 240 205 195 190 170 180 160 150 140 135 125 115 110 105 92 90 80 80 70 60 55 50 50 40 40 35 31 28 27 26 MODEL IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 IMS-5 Notes (1) Measured with full length lead (2) Rated DC current: Based on maximum temperature rise not to exceed 15 °C at +90 °C ambient (3) Incremental current: The minimum typical current at which the inductance will be decreased by 5 % from its initial zero DC value ORDERING INFORMATION IMS-5 10 μH ± 10 % ER e2 MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC® LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER I M S MODEL Revison: 07-Feb-17 0 5 E R PACKAGE CODE 1 0 INDUCTANCE VALUE 0 K INDUCTANCE TOLERANCE Document Number: 34048 2 For technical questions, contact: magnetics@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000