IRF620

IRF620 www.vishay.com Vishay Siliconix Power MOSFET FEATURES D • Dynamic dv/dt rating TO-220AB Available • Repetitive avalanche rated • Fast switching G Available • Ease of paralleling Available • Simple drive requirements G D S • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 S Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details N-Channel MOSFET PRODUCT SUMMARY VDS (V) 200 RDS(on) (Ω) VGS = 10 V Qg max. (nC) 14 Qgs (nC) 3.0 Qgd (nC) DESCRIPTION 0.80 Third generation power MOSFETs from Vishay provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. The TO-220AB package is universally preferred for all commercial-industrial applications at power dissipation levels to approximately 50 W. The low thermal resistance and low package cost of the TO-220AB contribute to its wide acceptance throughout the industry. 7.9 Configuration Single ORDERING INFORMATION Package TO-220AB Lead (Pb)-free IRF620PbF Lead (Pb)-free and halogen-free IRF620PbF-BE3 ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted) PARAMETER SYMBOL LIMIT Drain-source voltage VDS 200 Gate-source voltage VGS ± 20 VGS at 10 V Continuous drain current Pulsed drain TC = 25 °C TC = 100 °C current a ID IDM Linear derating factor UNIT V 5.2 3.3 A 18 0.40 W/°C mJ Single pulse avalanche energy b EAS 110 Repetitive avalanche current a IAR 5.2 A Repetitive avalanche energy a EAR 5.0 mJ Maximum power dissipation TC = 25 °C Peak diode recovery dV/dt c Operating junction and storage temperature range Soldering recommendations (peak temperature) Mounting torque d For 10 s 6-32 or M3 screw PD 50 W dv/dt 5.0 V/ns TJ, Tstg -55 to +150 300 °C 10 lbf · in 1.1 N·m Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11) b. VDD = 50 V, starting TJ = 25 °C, L = 6.1 mH, Rg = 25 Ω, IAS = 5.2 A (see fig. 12) c. ISD ≤ 5.2 A, di/dt ≤ 95 A/μs, VDD ≤ VDS, TJ ≤ 150 °C d. 1.6 mm from case S21-0819-Rev. C, 02-Aug-2021 Document Number: 91027 1 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF620 www.vishay.com Vishay Siliconix THERMAL RESISTANCE RATINGS PARAMETER SYMBOL TYP. MAX. Maximum junction-to-ambient RthJA - 62 Case-to-sink, flat, greased surface RthCS 0.50 - Maximum junction-to-case (drain) RthJC - 2.5 UNIT °C/W SPECIFICATIONS (TJ = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-source breakdown voltage VDS temperature coefficient Gate-source threshold voltage VDS VGS = 0 V, ID = 250 μA 200 - - V ΔVDS/TJ Reference to 25 °C, ID = 1 mA - 0.29 - V/°C VGS(th) VDS = VGS, ID = 250 μA 2.0 - 4.0 V Gate-source leakage IGSS VGS = ± 20 V - - ± 100 nA Zero gate voltage drain current IDSS VDS = 200 V, VGS = 0 V - - 25 VDS = 160 V, VGS = 0 V, TJ = 125 °C - - 250 Drain-source on-state resistance Forward transconductance μA - - 0.80 Ω gfs VDS = 50 V, ID = 3.1 A 1.5 - - S VGS = 0 V, VDS = 25 V, f = 1.0 MHz, see fig. 5 - 260 - - 100 - - 30 - - - 14 RDS(on) ID = 3.1 A b VGS = 10 V Dynamic Input capacitance Ciss Output capacitance Coss Reverse transfer capacitance Crss Total gate charge Qg Gate-source charge Qgs Gate-drain charge Qgd Turn-on delay time td(on) Rise time Turn-off delay time tr td(off) Fall time tf Gate input resistance Rg Internal drain inductance LD Internal source inductance LS VGS = 10 V ID = 4.8 A, VDS = 160 V, see fig. 6 and 13 b - - 3.0 - - 7.9 - 7.2 - VDD = 100 V, ID = 4.8 A, Rg = 18 Ω, RD = 20 Ω, see fig. 10 b - 22 - - 19 - - 13 - f = 1 MHz, open drain 0.8 - 3.5 - 4.5 - - 7.5 - - - 5.2 - - 18 Between lead, 6 mm (0.25") from package and center of die contact D pF nC ns Ω nH G S Drain-Source Body Diode Characteristics Continuous source-drain diode current Pulsed diode forward current a Body diode voltage IS ISM VSD Body diode reverse recovery time trr Body diode reverse recovery charge Qrr Forward turn-on time ton MOSFET symbol showing the integral reverse p - n junction diode D A G TJ = 25 °C, IS = 5.2 A, VGS = 0 S Vb TJ = 25 °C, IF = 4.8 A, dI/dt = 100 A/μs - - 1.8 V - 150 300 ns - 0.91 1.8 μC Intrinsic turn-on time is negligible (turn-on is dominated by LS and LD) Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11) b. Pulse width ≤ 300 μs; duty cycle ≤ 2 % S21-0819-Rev. C, 02-Aug-2021 Document Number: 91027 2 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF620 www.vishay.com Vishay Siliconix VGS 15 V 10 V 8.0 V 7.0 V 6.0 V 5.5 V 5.0 V Bottom 4.5 V ID, Drain Current (A) 101 Top 100 4.5 V 10-1 20 µs Pulse Width TC = 25 °C 10-2 10-2 100 10-1 101 VDS, Drain-to-Source Voltage (V) 91027_01 RDS(on), Drain-to-Source On Resistance (Normalized) TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 2.0 1.5 1.0 0.5 0.0 - 60 - 40 - 20 0 20 40 60 80 100 120 140 160 TJ, Junction Temperature (°C) Fig. 4 - Normalized On-Resistance vs. Temperature 750 VGS 15 V 10 V 8.0 V 7.0 V 6.0 V 5.5 V 5.0 V Bottom 4.5 V VGS = 0 V, f = 1 MHz Ciss = Cgs + Cgd, Cds Shorted Crss = Cgd Coss = Cds + Cgd Top 100 600 Capacitance (pF) ID, Drain Current (A) 2.5 ID = 4.8 A VGS = 10 V 91027_04 Fig. 1 - Typical Output Characteristics, TC = 25 °C 101 3.0 4.5 V 10-1 450 Ciss 300 Coss 150 Crss 20 µs Pulse Width TC = 150 °C 10-2 100 10-1 0 101 100 VDS, Drain-to-Source Voltage (V) 91027_02 Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage 20 150 °C 100 25 °C 10-1 20 µs Pulse Width VDS = 50 V 4 5 6 7 8 9 VGS, Gate-to-Source Voltage (V) Fig. 3 - Typical Transfer Characteristics S21-0819-Rev. C, 02-Aug-2021 VGS, Gate-to-Source Voltage (V) ID, Drain Current (A) 101 91027_03 VDS, Drain-to-Source Voltage (V) 91027_05 Fig. 2 - Typical Output Characteristics, TC = 150 °C 101 ID = 4.8 A VDS = 160 V 16 VDS = 100 V VDS = 40 V 12 8 4 For test circuit see figure 13 0 10 0 91027_06 3 6 9 12 15 QG, Total Gate Charge (nC) Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage Document Number: 91027 3 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF620 www.vishay.com Vishay Siliconix 101 5.0 ID, Drain Current (A) ISD, Reverse Drain Current (A) 6.0 150 °C 25 °C 100 3.0 2.0 1.0 VGS = 0 V 0.5 0.8 1.0 0.0 1.5 1.3 25 VSD, Source-to-Drain Voltage (V) 91027_07 102 50 100 VGS 10 µs D.U.T. RG 10 + - VDD 100 µs 5 150 RD VDS 2 125 Fig. 9 - Maximum Drain Current vs. Case Temperature Operation in this area limited by RDS(on) 5 75 TC, Case Temperature (°C) 91027_09 Fig. 7 - Typical Source-Drain Diode Forward Voltage ID, Drain Current (A) 4.0 10 V Pulse width ≤ 1 µs Duty factor ≤ 0.1 % 1 ms 2 1 10 ms 5 Fig. 10a - Switching Time Test Circuit TC = 25 °C TJ = 150 °C Single Pulse 2 0.1 0.1 2 5 1 2 5 10 2 5 102 2 5 VDS 103 90 % VDS, Drain-to-Source Voltage (V) 91027_08 Fig. 8 - Maximum Safe Operating Area 10 % VGS td(on) td(off) tf tr Fig. 10b - Switching Time Waveforms Thermal Response (ZthJC) 10 1 0 − 0.5 0.2 PDM 0.1 0.05 0.1 t1 0.02 0.01 Single Pulse (Thermal Response) t2 Notes: 1. Duty Factor, D = t1/t2 2. Peak Tj = PDM x ZthJC + TC 10-2 10-5 91027_11 10-4 10-3 10-2 0.1 1 10 t1, Rectangular Pulse Duration (s) Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Case S21-0819-Rev. C, 02-Aug-2021 Document Number: 91027 4 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF620 www.vishay.com Vishay Siliconix Current regulator Same type as D.U.T. L Vary tp to obtain required IAS VDS 50 kΩ D.U.T. RG + - IAS 12 V 0.2 µF V DD 0.3 µF A + 10 V D.U.T. 0.01 Ω tp - VDS VGS 3 mA Fig. 12a - Unclamped Inductive Test Circuit IG ID Current sampling resistors VDS Fig. 13b - Gate Charge Test Circuit tp VDD VDS IAS Fig. 12b - Unclamped Inductive Waveforms EAS, Single Pulse Energy (mJ) 300 ID 2.3 A 3.3 A Bottom 5.2 A Top 250 200 150 100 50 VDD = 50 V 0 25 75 50 100 125 150 Starting TJ, Junction Temperature (°C) 91027_12c Fig. 12c - Maximum Avalanche Energy vs. Drain Current QG 10 V QGS QGD VG Charge Fig. 13a - Basic Gate Charge Waveform S21-0819-Rev. C, 02-Aug-2021 Document Number: 91027 5 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRF620 www.vishay.com Vishay Siliconix Peak Diode Recovery dV/dt Test Circuit + D.U.T. Circuit layout considerations • Low stray inductance • Ground plane • Low leakage inductance current transformer + - - Rg • • • • + dV/dt controlled by Rg Driver same type as D.U.T. ISD controlled by duty factor “D” D.U.T. - device under test + - VDD Driver gate drive P.W. Period D= P.W. Period VGS = 10 Va D.U.T. lSD waveform Reverse recovery current Body diode forward current dI/dt D.U.T. VDS waveform Diode recovery dV/dt Re-applied voltage Inductor current VDD Body diode forward drop Ripple ≤ 5 % ISD Note a. VGS = 5 V for logic level devices Fig. 14 - For N-Channel Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see http://www.vishay.com/ppg?91027. S21-0819-Rev. C, 02-Aug-2021 Document Number: 91027 6 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information www.vishay.com Vishay Siliconix TO-220-1 A E F D H(1) Q ØP 3 2 L(1) 1 M* L b(1) C b e J(1) e(1) MILLIMETERS DIM. INCHES MIN. MAX. MIN. MAX. A 4.24 4.65 0.167 0.183 b 0.69 1.02 0.027 0.040 b(1) 1.14 1.78 0.045 0.070 c 0.36 0.61 0.014 0.024 D 14.33 15.85 0.564 0.624 E 9.96 10.52 0.392 0.414 e 2.41 2.67 0.095 0.105 e(1) 4.88 5.28 0.192 0.208 F 1.14 1.40 0.045 0.055 H(1) 6.10 6.71 0.240 0.264 J(1) 2.41 2.92 0.095 0.115 L 13.36 14.40 0.526 0.567 L(1) 3.33 4.04 0.131 0.159 ØP 3.53 3.94 0.139 0.155 Q 2.54 3.00 0.100 0.118 ECN: E21-0621-Rev. D, 04-Nov-2021 DWG: 6031 Note • M* = 0.052 inches to 0.064 inches (dimension including protrusion), heatsink hole for HVM Document Number: 66542 1 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revison: 04-Nov-2021 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000