IRFL214

IRFL214, SiHFL214 www.vishay.com Vishay Siliconix Power MOSFET D FEATURES S • • • • • • • • SOT-223 G D G D S N-Channel MOSFET DESCRIPTION Third generation power MOSFETs from Vishay provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. The SOT-223 package is designed for surface-mounting using vapor phase, infrared, or wave soldering techniques. Its unique package design allows for easy automatic pick-and-place as with other SOT or SOIC packages but has the added advantage of improved thermal performance due to an enlarged tab for heatsinking. Power dissipation of greater than 1.25 W is possible in a typical surface mount application. Marking code: FD PRODUCT SUMMARY VDS (V) RDS(on) () 250 VGS = 10 V Qg (Max.) (nC) 2.0 8.2 Qgs (nC) 1.8 Qgd (nC) 4.5 Configuration Surface-mount Available in tape and reel Dynamic dV/dt rating Repetitive avalanche rated Fast switching Available Ease of paralleling Simple drive requirements Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Single ORDERING INFORMATION Package SOT-223 SiHFL214TR-GE3 a Lead (Pb)-free and halogen-free IRFL214TRPbF-BE3 a, b IRFL214TRPbF a Lead (Pb)-free Notes a. See device orientation b. “-BE3” denotes alternate manufacturing location ABSOLUTE MAXIMUM RATINGS (TC = 25 °C, unless otherwise noted) PARAMETER Drain-source voltage SYMBOL VDS LIMIT 250 Gate-source voltage VGS ± 20 Continuous drain current VGS at 10 V TC = 25 °C TC = 100 °C Pulsed drain current a ID IDM UNIT V 0.79 0.50 A 6.3 Linear derating factor 0.025 Linear derating factor (PCB mount) e 0.017 W/°C Single pulse avalanche energy b EAS 50 Avalanche current a IAR 0.79 A Repetitive avalanche energy a EAR 0.31 mJ Maximum power dissipation TC = 25 °C Maximum power dissipation (PCB mount) e TA = 25 °C Peak diode recovery dv/dt c Operating junction and storage temperature range Soldering recommendations (peak temperature) d For 10 s PD 3.1 2.0 dV/dt 4.8 TJ, Tstg -55 to +150 300 mJ W V/ns °C Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11) b. VDD = 50 V, starting TJ = 25 °C, L = 128 mH, Rg = 25 , IAS = 0.79 A (see fig. 12) c. ISD  2.7 A, dI/dt  65 A/μs, VDD  VDS, TJ  150 °C d. 1.6 mm from case e. When mounted on 1" square PCB (FR-4 or G-10 material) S21-0322-Rev. F, 05-Apr-2021 Document Number: 91194 1 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRFL214, SiHFL214 www.vishay.com Vishay Siliconix THERMAL RESISTANCE RATINGS PARAMETER SYMBOL MIN. TYP. MAX. Maximum junction-to-ambient  (PCB mount) a RthJA - - 60 Maximum junction-to-case (drain) RthJC - - 40 UNIT °C/W Note a. When mounted on 1" square PCB (FR-4 or G-10 material) SPECIFICATIONS (TJ = 25 °C, unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-source breakdown voltage VDS temperature coefficient Gate-source threshold voltage VDS VGS = 0 V, ID = 250 μA 250 - - V VDS/TJ Reference to 25 °C, ID = 1 mA - 0.39 - V/°C VGS(th) VDS = VGS, ID = 250 μA 2.0 - 4.0 V Gate-source leakage IGSS VGS = ± 20 V - - ± 100 nA Zero gate voltage drain current IDSS VDS = 250 V, VGS = 0 V - - 25 VDS = 200 V, VGS = 0 V, TJ = 125 °C - - 250 Drain-source on-state resistance Forward transconductance μA - - 2.0  gfs VDS = 50 V, ID = 0.47 A 0.50 - - S VGS = 0 V, VDS = 25 V, f = 1.0 MHz, see fig. 5 - 140 - - 42 - - 9.6 - - - 8.2 - - 1.8 RDS(on) ID = 0.47 A b VGS = 10 V Dynamic Input capacitance Ciss Output capacitance Coss Reverse transfer capacitance Crss Total gate charge Qg Gate-source charge Qgs Gate-drain charge Qgd - - 4.5 Turn-on delay time td(on) - 7.0 - tr - 7.6 - - 16 - Rise time Turn-off delay time td(off) Fall time tf Internal drain inductance LD Internal source inductance LS VGS = 10 V ID = 2.7 A, VDS = 200 V, see fig. 6 and 13 b VDD = 125 V, ID = 2.7 A, Rg = 24 , RD = 45 , see fig. 10 b Between lead, 6 mm (0.25") from package and center of die contact D G pF nC ns - 7.0 - - 4.0 - - 6.0 - - - 0.79 - - 6.3 - - 2.0 - 190 390 ns - 0.64 1.3 μC nH S Drain-Source Body Diode Characteristics Continuous source-drain diode current IS Pulsed diode forward current a ISM Body diode voltage VSD Body diode reverse recovery time trr Body diode reverse recovery charge Qrr Forward turn-on time ton MOSFET symbol showing the  integral reverse p - n junction diode D A G S TJ = 25 °C, IS = 0.79 A, VGS = 0 V b TJ = 25 °C, IF = 2.7 A, dI/dt = 100 A/μs b V Intrinsic turn-on time is negligible (turn-on is dominated by LS and LD) Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11) b. Pulse width  300 μs; duty cycle  2 % S21-0322-Rev. F, 05-Apr-2021 Document Number: 91194 2 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRFL214, SiHFL214 www.vishay.com Vishay Siliconix TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Fig. 1 - Typical Output Characteristics Fig. 2 - Typical Output Characteristics Fig. 3 - Typical Transfer Characteristics S21-0322-Rev. F, 05-Apr-2021 Fig. 4 - Normalized On-Resistance vs. Temperature Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage Document Number: 91194 3 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRFL214, SiHFL214 www.vishay.com Fig. 7 - Typical Source-Drain Diode Forward Voltage Vishay Siliconix Fig. 9 - Maximum Drain Current vs. Case Temperature RD VDS VGS D.U.T. Rg + - VDD 10 V Pulse width ≤ 1 µs Duty factor ≤ 0.1 % Fig. 10a - Switching Time Test Circuit VDS 90 % Fig. 8 - Maximum Safe Operating Area 10 % VGS td(on) tr td(off) tf Fig. 10b - Switching Time Waveforms Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Case S21-0322-Rev. F, 05-Apr-2021 Document Number: 91194 4 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRFL214, SiHFL214 www.vishay.com Vishay Siliconix L Vary tp to obtain required IAS VDS VDS tp VDD D.U.T. Rg + - I AS V DD VDS 10 V 0.01 Ω tp Fig. 12a - Unclamped Inductive Test Circuit IAS Fig. 12b - Unclamped Inductive Waveforms Fig. 12c - Maximum Avalanche Energy vs. Drain Current Current regulator Same type as D.U.T. 50 kΩ QG VGS 12 V 0.2 µF 0.3 µF QGS QGD + D.U.T. VG - VDS VGS 3 mA Charge IG ID Current sampling resistors Fig. 13a - Basic Gate Charge Waveform S21-0322-Rev. F, 05-Apr-2021 Fig. 13b - Gate Charge Test Circuit Document Number: 91194 5 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 IRFL214, SiHFL214 www.vishay.com Vishay Siliconix Peak Diode Recovery dV/dt Test Circuit + D.U.T. Circuit layout considerations • Low stray inductance • Ground plane • Low leakage inductance current transformer + - - Rg • • • • + dV/dt controlled by Rg Driver same type as D.U.T. ISD controlled by duty factor “D” D.U.T. - device under test + - VDD Driver gate drive P.W. Period D= P.W. Period VGS = 10 Va D.U.T. lSD waveform Reverse recovery current Body diode forward current dI/dt D.U.T. VDS waveform Diode recovery dV/dt Re-applied voltage Inductor current VDD Body diode forward drop Ripple ≤ 5 % ISD Note a. VGS = 5 V for logic level devices Fig.14 - For N-Channel          Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?91194. S21-0322-Rev. F, 05-Apr-2021 Document Number: 91194 6 For technical questions, contact: hvm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information Vishay Siliconix SOT-223 (HIGH VOLTAGE) B D A 3 0.08 (0.003) B1 C 0.10 (0.004) M C B M A 4 3 H E 0.20 (0.008) M C A M L1 1 2 3 4xL 3xB e θ 0.10 (0.004) M C B M e1 4xC MILLIMETERS INCHES DIM. MIN. MAX. MIN. MAX. A 1.55 1.80 0.061 0.071 0.033 B 0.65 0.85 0.026 B1 2.95 3.15 0.116 0.124 C 0.25 0.35 0.010 0.014 D 6.30 6.70 0.248 0.264 E 3.30 3.70 0.130 e 2.30 BSC e1 4.60 BSC 0.181 BSC H 6.71 7.29 0.264 L 0.91 - 0.036 L1 θ 0.061 BSC - 0.146 0.0905 BSC 0.287 0.0024 BSC 10' - 10' ECN: S-82109-Rev. A, 15-Sep-08 DWG: 5969 Notes 1. Dimensioning and tolerancing per ASME Y14.5M-1994. 2. Dimensions are shown in millimeters (inches). 3. Dimension do not include mold flash. 4. Outline conforms to JEDEC outline TO-261AA. Document Number: 91363 Revision: 15-Sep-08 www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000