ISOA100R12202JT

ISOA www.vishay.com Vishay MCB Thick Film Power Resistor With NTC (Optional) FEATURES • Cold system without external radiation • High power / volume ratio • Cooled by auxiliary heatsink (not supplied) • Non-inductive • Pre-applied phase change thermal interface PC-TIM (optional) • Internal temperature monitoring with a NTC thermistor • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models STANDARD ELECTRICAL SPECIFICATIONS MODEL RESISTANCE RANGE Ω MAX. RATED POWER BC85 °C W TOLERANCE (1) ±% TEMPERATURE COEFFICIENT ± ppm/°C 0.47 to 3 120 10, 5 300 3 to 220 120 10, 5 150 220 to 1M 120 10, 5 100 ISOA E-SERIES OHMIC VALUES E24 Note (1) ± 2 % or ± 1 % on special request for limited resistance value and with reduction of maximum power and pulse rating (contact us for details) MECHANICAL SPECIFICATIONS UL 94 flame classifications Housing and potting materials comply with UL 94 V-0 standard Resistive element Cermet Substrate Alumina Encapsulation Resin filled case TECHNICAL SPECIFICATIONS PARAMETER ISOA Nominal power at 85 °C bottom case temperature 120 W Operating temperature range -55 °C to +150 °C Maximum operating voltage 1500 V Dielectric strength with all terminals connected as one pole 3000 VRMS (50 Hz / 1 min) Dielectric strength power resistor to NTC resistor 1500 VRMS (50 Hz / 1 min) CTI > 600 Creepage distance Clearance distance Insulation Inductance NTC characteristics (option) Weight (max.) Revision: 12-Oct-2022 > 4.2 mm > 3.6 mm ≥ 10 GΩ at 1000 VDC ≤ 50 nH Vishay NTCS0603E3103FLT www.vishay.com/doc?29056 < 16 g Document Number: 32598 1 For technical questions, contact: mcbfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ISOA www.vishay.com Vishay MCB PERFORMANCES (AEC-Q200 Revision D Qualification Type Tests) TESTS CONDITIONS REQUIREMENTS High temperature exposure MIL-STD-202 method 108 Condition: 1000 h at T = 155 °C. Unpowered ≤ ± (2 % + 0.1 Ω) Temperature cycling JESD22 method JA-104 1000 cycles (-55 °C to +125 °C) ≤ ± (2 % + 0.1 Ω) Biased humidity MIL-STD-202 method 103 Condition: 1000 h 85 °C / 85 % RH, 10 % of operating power 10 W ≤ ± (5 % + 0.1 Ω) Operational life MIL-STD-202 method 108 Condition: D steady state TA = 85 °C of bottom case at rated power 120 W 90' On / 30' off / 1000 h ≤ ± (2 % + 0.1 Ω) AEC-Q200-002 Condition: 6 kV to 25 kV ≤ ± (0.5 % + 0.05 Ω) Vibration MIL-STD-202 method 204 Condition B: 10 g’s for 20 min for 1 cycle, 12 cycles each of 3 orientations (total of 36). Test from 10 Hz to 2000 Hz ≤ ± (0.5 % + 0.05 Ω) Mechanical shock MIL-STD-202 method 213 Fig. 1 Condition C: 100 g’s/6 ms 3.75 m/s 3 shock/direction, 2 directions along 3 axes (18 shocks) ≤ ± (0.5 % + 0.05 Ω) MIL-STD-202 method 211 Test leaded device lead integrity only. Conditions: A (2.27 kg) ≤ ± (0.5 % + 0.05 Ω) ESD Terminal strength (leaded) Note • All tests were done in Vishay MCB laboratories conditions POWER DISSIPATION 10000 1000 1st line 2nd line 2nd line Power (W) Axis Title 130 120 110 100 90 80 70 60 50 40 30 20 10 0 100 P = f (T°) 10 0 20 40 60 80 100 120 140 160 Temperature (°C) Permanent applicable power (W) as a function of bottom case temperature (°C) Revision: 12-Oct-2022 Document Number: 32598 2 For technical questions, contact: mcbfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ISOA www.vishay.com Vishay MCB PULSE ENERGY Axis Title 10000 10 000 1000 1st line 2nd line 2nd line Energy (J) 1000 100 10 100 1 0.1 0.01 0.1 1 10 100 1000 10 10 000 Time (ms) POWER VS. TIME Axis Title 10000 10 1000 1 100 1st line 2nd line 2nd line Power (kW) 100 0.1 0.01 0.1 1 10 100 1000 10 10 000 Time (ms) DIMENSIONS in millimeters (4 x) M4 12.7 ± 0.2 25 ± 0.3 E 22.2 ± 0.27 (4 x) 7 4.8 ± 0.1 Ø 4.8 ± 0.1 5.4 0.6 15 ± 0.2 30.3 ± 0.14 38.2 ± 0.2 Revision: 12-Oct-2022 Document Number: 32598 3 For technical questions, contact: mcbfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ISOA www.vishay.com Vishay MCB DIMENSIONS in millimeters 1 12 ± 0.2 2.9 ± 0.2 10.5 ± 0.2 SA (1) E SA (1) A SA (1) Note (1) SA: under alumina INTERNAL CONFIGURATION 1 4 3 1 2 R1 3 R1 4 CONFIGURATION N1 / T1 OR NT R2: thermistor CONFIGURATION R1 2 ASSEMBLY 7.7 maximum available screw insertion Tightening torque for mechanical fixation 1.8 Nm ± 0.2 Nm Tightening torque for electrical connections 1.3 Nm ± 0.2 Nm STORAGE CONDITIONS Parts shall be stored in a dry place from 0 °C to +40 °C at 80 % RH maximum. COOLING The temperature of the heatsink may be maintained at the specified values with: • Forced air ventilation or internal circulation of a liquid cooling • Heatsink contact surface: < Ra 6.3 μ • Evenness defect: 0.05 mm / 50 mm and 0.025 mm / 25 mm • Surface temperature gradient (isotherm): 20 °C max. • Thermal compound not supplied (resistance < 0.025 °C / W / 0.05 mm preconized) • Mounting recommendation: www.vishay.com/doc? Note • The user must select the thermal resistance of the heatsink according to the power applied Revision: 12-Oct-2022 Document Number: 32598 4 For technical questions, contact: mcbfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ISOA www.vishay.com Vishay MCB ORDERING INFORMATION ISOA 100 R1 1301 5% XXX TU10 MODEL STYLE CONFIGURATION RESISTANCE VALUE TOLERANCE CUSTOM DESIGN PACKAGING Single resistor or Resistor and NTC ±5% ± 10 % Other on request GLOBAL PART NUMBER INFORMATION I S O A 1 1 1 R 1 1 3 3 0 1 4 J T 5 6 X X X 7 3 4 5 6 7 OPTIONS OHMIC VALUE TOLERANCE PACKAGING INDUSTRIALIZATION NUMBER R1: 1 resistor only N1: 1 resistor and NTC T1: 1 resistor and TIM NT: 1 resistor and NTC, and TIM The first three digits are significant figures and the last specifies the number of zeros to follow, R designates decimal point. 1301 = 1300 Ω J=5% K = 10 % T = tube 10 pieces 3 specific digits (if applicable) TYPE POWER 100 W 0 2 2 ISOA 0 Revision: 12-Oct-2022 Document Number: 32598 5 For technical questions, contact: mcbfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000