LTO050F2R200JTE3

LTO 50 www.vishay.com Vishay Sfernice Power Resistor Thick Film Technology FEATURES • 50 W at 25 °C case temperature heatsink mounted • Direct mounting ceramic on heatsink • Broad resistance range: 0.010 Ω to 550 kΩ • Non inductive • TO-220 package: compact and easy to mount • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. DIMENSIONS in millimeters 3.2 10.4 3.2 16.2 Ø 3.2 1.3 3.5 12.7 0.8 0.6 1.8 5.08 Note • Tolerances unless stated: ± 0.3 mm STANDARD ELECTRICAL SPECIFICATIONS MODEL SIZE LTO 50 TO-220 RESISTANCE RANGE Ω RATED POWER LIMITING ELEMENT TOLERANCE P25 °C VOLTAGE UL ±% W V TEMPERATURE COEFFICIENT ± ppm/°C CRITICAL RESISTANCE Ω 0.01 to < 0.5 50 500 5, 10 250, 700, 900 n/a 0.5 to 550K 50 500 1, 2, 5, 10 150 5K MECHANICAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Mechanical Protection Temperature Range Resistive Element Substrate Connections Weight Mounting Torque Revision: 08-Dec-2021 Molded Thick film Climatic Category Alumina Tinned copper 2 g max. Flammability -55 °C to +150 °C 55 / 155 / 56 IEC 60695-11-5 Application time: ta = 10 s Burning duration: tb < 30 s 1 Nm Document Number: 50050 1 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LTO 50 www.vishay.com Vishay Sfernice TECHNICAL SPECIFICATIONS Dissipation and Associated Onto a heatsink 50 W at +25 °C (case temp.) RTH (j - c): 2.5 °C/W Free air: 2.5 W at +25 °C See Performance table ± 150 ppm/°C 1500 VRMS - 1 min 10 mA max. ≥ 104 MΩ ≤ 0.1 μH Power Rating and Thermal Resistance of the Component Temperature Coefficient Standard Dielectric Strength MIL STD 202 Insulation Resistance Inductance PERFORMANCE TESTS CONDITIONS EN 60115-1 1.5 Pr / 5 s US < 1.5 UL EN 60115-1 IEC 60068-2-14 Test Na 5 cycles -55 °C to +155 °C EN 60115-1 1000 h Pr at +25 °C MIL-STD-202 method 103 B cond. D MIL-STD-202 method 204 cond. D MIL-STD-202 method 211 cond. A1 100G, MIL-STD-202 method 213 cond. I Momentary Overload Rapid Temperature Change Load Life Humidity (Steady State) Vibration Terminal Strength Shock REQUIREMENTS ± (0.5 % + 0.005 Ω) ± (0.5 % + 0.005 Ω) ± (1 % + 0.005 Ω) ± (0.5 % + 0.005 Ω) ± (0.2 % + 0.005 Ω) ± (0.2 % + 0.005 Ω) ± (0.5 % + 0.005 Ω) SPECIAL FEATURES Resistance Values Tolerances Typical Temperature Coefficient (-55 °C to +155 °C) ≥ 0.01 ≥ 0.015 5 %, 10 % ≥ 0.1 ≥ 0.5 1 %, 2 %, 5 %, 10 % ± 900 ppm/°C ± 700 ppm/°C ± 250 ppm/°C ± 150 ppm/°C CHOICE OF THE HEATSINK The user must choose according to the working conditions of the component (power, room temperature). Maximum working temperature must not exceed 150 °C. The dissipated power is simply calculated by the following ratio: (1) ΔT P = ------------------------------------------------------------------------------------------R TH (j - c) + R TH (c - h) + R TH (h - a) P: expressed in W ΔT: difference between maximum working temperature and room temperature RTH (j - c): thermal resistance value measured between resistive layer and outer side of the resistor. It is the thermal resistance of the component. RTH (c - h): thermal resistance value measured between outer side of the resistor and upper side of the heatsink. This is the thermal resistance of the interface (grease, thermal pad), and the quality of the fastening device. RTH (h - a): thermal resistance of the heatsink. Example: RTH (c - a) for LTO 50 power rating 10 W at ambient temperature +25 °C Thermal resistance RTH (j - c): 2.5 °C/W Considering equation (1) we have: ΔT = 150 °C - 25 °C = 125 °C ΔT 125 RTH (j - c) + RTH (c - h) + RTH (h - a) = ----- = -------- = 12.5 °C/W P 10 RTH (c - h) + RTH (h - a) = 12.5 °C/W - 2.5 °C/W = 10 °C/W with a thermal grease RTH (c - h) = 1 °C/W, we need a heatsink with RTH (h - a) = 9 °C/W. Revision: 08-Dec-2021 Document Number: 50050 2 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LTO 50 www.vishay.com Vishay Sfernice OVERLOADS POWER RATING In any case the applied voltage must be lower than the maximum overload voltage of 750 V. The values indicated on the graph below are applicable to resistors in air or mounted onto a heatsink. The temperature of the case should be maintained within the limits specified. To improve the thermal conductivity, surfaces in contact should be coated with a silicone grease and the torque applied on the screw for tightening should be around 1 Nm. ENERGY CURVE 125 RATED POWER IN % ENERGY IN JOULES 100 10 1 0.1 0.01 10-7 10-6 10-5 10-4 10-3 10-2 10-1 100 OVERLOAD DURATION IN s 100 75 50 25 0 0 20 40 60 80 100 120 140 150 CASE TEMPERATURE IN °C POWER CURVE 1 000 000 PACKAGING Tube of 50 units POWER IN W 100 000 MARKING 10 000 Model, style, resistance value (in Ω), tolerance (in %), manufacturing date, Vishay Sfernice trademark. 1000 100 10-7 10-6 10-5 10-4 10-3 10-2 10-1 100 OVERLOAD DURATION IN s Revision: 08-Dec-2021 Document Number: 50050 3 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LTO 50 www.vishay.com Vishay Sfernice ORDERING INFORMATION LTO 50 F 2.7 kΩ ±1% xxx TU50 e3 MODEL STYLE CONNECTIONS RESISTANCE VALUE TOLERANCE CUSTOM DESIGN optional on request: special TCR, shape etc. PACKAGING LEAD (Pb)-FREE ±1% ±2% ±5% ± 10 % GLOBAL PART NUMBER INFORMATION L T O 0 5 0 F 2 7 0 0 0 J T E 3 GLOBAL MODEL SIZE LEADS OHMIC VALUE TOLERANCE PACKAGING LEAD (Pb)-FREE LTO 050 F = radial leads The first four digits are significant figures and the last digit specifies the number of zeros to follow. R designates decimal point. 48R70 = 48.7 Ω 48701 = 48 700 Ω 10002 = 100 000 Ω R0100 = 0.01 Ω R4700 = 0.47 Ω 27000 = 2700 Ω = 2.7 kΩ F=1% G=2% J=5% K = 10 % T = tube E3 = pure tin tube 50 pieces RELATED DOCUMENTS APPLICATION NOTES Potentiometers and Trimmers www.vishay.com/doc?51001 Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029 Revision: 08-Dec-2021 Document Number: 50050 4 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000