LTO100F4R700JTE3

LTO 100 www.vishay.com Vishay Sfernice Power Resistor Thick Film Technology FEATURES • 100 W at 25 °C case temperature heatsink mounted • Direct mounting ceramic on heatsink • Broad resistance range: 0.015 Ω to 1 MΩ • Non inductive • TO-247 package: compact and easy to mount • AEC-Q200 qualified LINKS TO ADDITIONAL RESOURCES • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 3D 3D 3D Models LTO series are the extension of RTO types. We used the direct ceramic mounting design (no metal tab) of our RCH power resistors applied to semiconductor packages. DIMENSIONS in millimeters 5.0 15.76 5.33 20.7 Ø 3.6 3.6 3.5 14.5 1.5 0.6 2.4 10.16 Note • Tolerances unless stated: ± 0.3 mm STANDARD ELECTRICAL SPECIFICATIONS MODEL SIZE RESISTANCE RANGE Ω LTO 100 TO-247 0.015 to < 0.2 100 500 LTO 100 TO-247 0.2 to 1M 100 500 TEMPERATURE COEFFICIENT ± ppm/°C CRITICAL RESISTANCE Ω 5, 10 350, 900 n/a 1, 2, 5, 10 200, 350 2.5 K RATED POWER LIMITING ELEMENT TOLERANCE P25 °C VOLTAGE UL ±% W V MECHANICAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Mechanical Protection Temperature Range Resistive Element Substrate Connections Weight Mounting Torque Revision: 08-Dec-2021 Molded Thick film Climatic Category Alumina Tinned copper Flammability -55 °C to +175 °C 55 / 175 / 56 IEC 60695-11-5 Application time: ta = 10 s Burning duration: tb < 30 s 3.5 g max. 1 Nm Document Number: 50051 1 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LTO 100 www.vishay.com Vishay Sfernice TECHNICAL SPECIFICATIONS Dissipation and Associated Onto a heatsink 100 W at +25 °C (case temp.) RTH (j - c): 1.5 °C/W Free air: 3.5 W at +25 °C Power Rating and Thermal Resistance of the Component See Performance table ± 150 ppm/°C Temperature Coefficient Dielectric Strength MIL STD 202 3000 VRMS - 1 min 10 mA max. Insulation Resistance ≥ 104 MΩ Inductance ≤ 0.1 μH PERFORMANCE TESTS CONDITIONS REQUIREMENTS EN 60115-1 1.5 Pr/5 s US < 1.5 UL ± (0.5 % + 0.005 Ω) EN 60115-1 1000 h Pr at +25 °C ± (0.5 % + 0.005 Ω) AEC-Q200 rev. D conditions: MIL-STD-202 method 108 1000 h, +175 °C, unpowered ± (0.25 % + 0.005 Ω) AEC-Q200 rev. D conditions: JESD22 method JA-104 1000 cycles, -55 °C to +125 °C dwell time -15 min ± (0.5 % + 0.005 Ω) Biased Humidity AEC-Q200 rev. D conditions: MIL-STD-202 method 103 1000 h, 85 °C, 85 % RH ± (1 % + 0.005 Ω) Operational Life AEC-Q200 rev. D conditions: MIL-STD-202 method 108 2000 h, 90/30, powered, +125 °C ± (0.5 % + 0.005 Ω) ESD Human Body Model AEC-Q200 rev. D conditions: AEC-Q200-002 25 kVAD ± (0.5 % + 0.005 Ω) Vibration AEC-Q200 rev. D conditions: MIL-STD-202 method 204 5 g’s for 20 min, 12 cycles test from 10 Hz to 2000 Hz ± (0.2 % + 0.005 Ω) Mechanical Shock AEC-Q200 rev. D conditions: MIL-STD-202 method 213 100 g’s, 6 ms, 3.75 m/s 3 shocks/direction ± (0.2 % + 0.005 Ω) Terminal Strength AEC-Q200 rev. D conditions: AEC-Q200-006 2 kgf, 60 s ± (0.25 % + 0.01 Ω) Momentary Overload Load Life High Temperature Exposure Temperature Cycling SPECIAL FEATURES Resistance Values ≥ 0.015 Tolerances Typical Temperature Coefficient (-55 °C to +155 °C) Revision: 08-Dec-2021 ≥ 0.1 5 %, 10 % ± 900 ppm/°C ≥ 0.2 ≥ 20 1 %, 2 %, 5 %, 10 % ± 350 ppm/°C ± 350 ppm/°C ± 200 ppm/°C Document Number: 50051 2 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LTO 100 www.vishay.com Vishay Sfernice CHOICE OF THE HEATSINK The user must choose according to the working conditions of the component (power, room temperature). Maximum working temperature must not exceed 175 °C. The dissipated power is simply calculated by the following ratio: (1) ΔT P = ----------------------------------------------------------------------------------[ R TH (j - c) ] + [ R TH (c - h) ] + [ R TH (h - a) ] P: Expressed in W ΔT: Difference between maximum working temperature and room temperature RTH (j - c): Thermal resistance value measured between resistive layer and outer side of the resistor. It is the thermal resistance of the component. RTH (c - h): Thermal resistance value measured between outer side of the resistor and upper side of the heatsink. This is the thermal resistance of the interface (grease, thermal pad), and the quality of the fastening device. RTH (h - a): Thermal resistance of the heatsink. Example: RTH (c - h) + RTH (h - a) for LTO 100 power rating 10 W at ambient temperature +25 °C Thermal resistance RTH (j - c): 1.5 °C/W Considering equation (1) we have: ΔT = 175 °C - 25 °C = 150 °C 150 ΔT RTH (j - c) + RTH (c - h) + RTH (h - a) = ------- = ----------- = 15 °C/W 10 P RTH (c - h) + RTH (h - a) = 15 °C/W - 1.5 °C/W = 13.5 °C/W with a thermal grease RTH (c - h) = 1 °C/W, we need a heatsink with RTH (h - a) = 12.5 °C/W. POWER RATING The temperature of the case should be maintained within the limits specified. To improve the thermal conductivity, surfaces in contact should be coated with a silicone grease and the torque applied on the screw for tightening should be around 1 Nm. Axis Title 10000 125 1000 75 1st line 2nd line 2nd line Rated Power (%) 100 50 100 25 10 0 0 20 40 60 80 100 120 140 160 175180 Case Temperature (°C) OVERLOADS In any case the applied voltage must be lower than the maximum overload voltage of 750 V. The values indicated on the graph below are applicable to resistors in air or mounted onto a heatsink. Revision: 08-Dec-2021 Document Number: 50051 3 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LTO 100 www.vishay.com Vishay Sfernice ENERGY CURVE Axis Title 100 10000 10 1st line 2nd line 2nd line Energy (J) 1000 1 100 0.1 0.01 0.0000001 10 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 Overloard Duration (s) POWER CURVE Axis Title 1 000 000 10000 100 000 1st line 2nd line x Power (W) 1000 10 000 100 1000 100 0.0000001 10 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 Overload Duration (s) IMPEDANCE CURVE 10 Ω to 1 kΩ from 100 kHz to 300 MHz Axis Title 10000 4.30 10 Ω 3.80 1000 2.80 1st line 2nd line 2nd line |Z|/R 3.30 2.30 25 Ω 1.80 100 50 Ω, 75 Ω, 100 Ω 270 Ω 500 Ω 1000 Ω 1.30 1.00 0.80 0.30 100 kHz 1 MHz 10 MHz 100 MHz 300 MHz 10 1000 MHz Frequency (Hz) Revision: 08-Dec-2021 Document Number: 50051 4 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LTO 100 www.vishay.com Vishay Sfernice MARKING PACKAGING Model, style, resistance value (in Ω), tolerance (in %), manufacturing date, Vishay Sfernice trademark. Tube of 30 units ORDERING INFORMATION LTO 100 F 2.7 kΩ ±1% xxx TU30 e3 MODEL STYLE CONNECTIONS RESISTANCE VALUE TOLERANCE CUSTOM DESIGN PACKAGING LEAD (Pb)-FREE ±1% ±2% ±5% ± 10 % Optional on request: special TCR, shape etc. GLOBAL PART NUMBER INFORMATION L T O 1 0 0 F 2 7 0 0 0 J T E 3 GLOBAL MODEL SIZE LEADS OHMIC VALUE TOLERANCE PACKAGING LEAD (Pb)-FREE LTO 100 F = radial leads The first four digits are significant figures and the last digit specifies the number of zeros to follow. R designates decimal point. 48R70 = 48.7 Ω 48701 = 48 700 Ω 10002 = 100 000 Ω R0100 = 0.01 Ω R4700 = 0.47 Ω 27000 = 2700 Ω = 2.7 kΩ F=1% G=2% J=5% K = 10 % T = tube E3 = pure tin Revision: 08-Dec-2021 Tube 30 pieces Document Number: 50051 5 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000