LTO100H47R00JTE3

Preliminary LTO 100 H www.vishay.com Vishay Sfernice Power Resistor Thick Film Technology FEATURES • 100 W at 25 °C case temperature heatsink mounted • Direct mounting ceramic on heatsink • Broad resistance range: 0.8 Ω to 4 kΩ • Non inductive • TO-247 package: compact and easy to mount • Higher pulse absorption, up to 52 J/0.1 s • AEC-Q200 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models LTO 100 H is the extension of LTO 100. This unique design is able to absorb 40 % more energy than standard LTO. DIMENSIONS in millimeters 5.0 15.76 5.33 20.7 Ø 3.6 3.6 3.5 14.5 1.5 0.6 2.4 10.16 Note • Tolerances unless stated: ± 0.3 mm STANDARD ELECTRICAL SPECIFICATIONS MODEL LTO 100 H SIZE RESISTANCE RANGE Ω TO-247 0.8 to 4K RATED POWER LIMITING ELEMENT TOLERANCE VOLTAGE UL P25 °C ±% W V 100 500 2, 5, 10 TEMPERATURE COEFFICIENT ± ppm/°C CRITICAL RESISTANCE Ω 200, 350 2.5K MECHANICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS Mechanical Protection Dissipation and Associated Resistive Element Substrate Connections Weight Mounting Torque Molded Thick film Alumina Tinned copper 4 g max. 1 Nm Power Rating and Thermal Resistance of the Component Temperature Coefficient Dielectric Strength MIL STD 202 Onto a heatsink 100 W at +25 °C (case temp.) RTH (j - c): 1.5 °C/W Free air: 3.5 W at +25 °C See Performance table ± 200 ppm/°C 3000 VRMS - 1 min 10 mA max. ENVIRONMENTAL SPECIFICATIONS Insulation Resistance ≥ 104 MΩ Temperature Range Inductance ≤ 0.1 μH Climatic Category Flammability Revision: 24-Nov-2021 -55 °C to +175 °C 55 / 175 / 56 IEC 60695-11-5 Application time: ta = 10 s Burning duration: tb < 30 s Document Number: 50081 1 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Preliminary LTO 100 H www.vishay.com Vishay Sfernice PERFORMANCE TESTS Momentary Overload Load Life High Temperature Exposure Temperature Cycling Biased Humidity Operational Life ESD Human Body Model Vibration Mechanical Shock Terminal Strength CONDITIONS EN 60115-1 1.5 Pr/5 s US < 1.5 UL REQUIREMENTS ± (0.5 % + 0.005 Ω) EN 60115-1 1000 h Pr at +25 °C AEC-Q200 rev. D conditions: MIL-STD-202 method 108 1000 h, +175 °C, unpowered AEC-Q200 rev. D conditions: JESD22 method JA-104 1000 cycles, -55 °C to +125 °C dwell time -15 min AEC-Q200 rev. D conditions: MIL-STD-202 method 103 1000 h, 85 °C, 85 % RH AEC-Q200 rev. D conditions: MIL-STD-202 method 108 2000 h, 90/30, powered, +125 °C AEC-Q200 rev. D conditions: AEC-Q200-002 25 kVAD AEC-Q200 rev. D conditions: MIL-STD-202 method 204 5 g’s for 20 min, 12 cycles test from 10 Hz to 2000 Hz ± (1 % + 0.005 Ω) ± (0.25 % + 0.005 Ω) ± (1 % + 0.005 Ω) ± (1 % +0.005 Ω) ± (1 % +0.005 Ω) ± (0.5 % +0.005 Ω) ± (0.5 % +0.005 Ω) AEC-Q200 rev. D conditions: MIL-STD-202 method 213 100 g’s, 6 ms, 3.75 m/s 3 shocks/direction AEC-Q200 rev. D conditions: AEC-Q200-006 2 kgf, 60 s ± (0.5 % +0.005 Ω) ± (0.25 % +0.01 Ω) SPECIAL FEATURES Resistance Values ≥ 0.8 Tolerances Typical Temperature Coefficient (-55 °C to +175 °C) > 20 ± 2 % at ± 10 % ± 350 ppm/°C ± 200 ppm/°C CHOICE OF THE HEATSINK The user must choose according to the working conditions of the component (power, room temperature). Maximum working temperature must not exceed 175 °C. The dissipated power is simply calculated by the following ratio: (1) ΔT P = ----------------------------------------------------------------------------------[ R TH (j - c) ] + [ R TH (c - h) ] + [ R TH (h - a) ] P: Expressed in W ΔT: Difference between maximum working temperature and room temperature RTH (j - c): Thermal resistance value measured between resistive layer and outer side of the resistor. It is the thermal resistance of the component. RTH (c - h): Thermal resistance value measured between outer side of the resistor and upper side of the heatsink. This is the thermal resistance of the interface (grease, thermal pad), and the quality of the fastening device. RTH (h - a): Thermal resistance of the heatsink. Example: RTH (c - h) + RTH (h - a) for LTO 100 H power rating 10 W at ambient temperature +25 °C Thermal resistance RTH (j - c): 1.5 °C/W Considering equation (1) we have: ΔT = 175 °C - 25 °C = 150 °C 150 ΔT RTH (j - c) + RTH (c - h) + RTH (h - a) = ------- = ----------- = 15 °C/W 10 P RTH (c - h) + RTH (h - a) = 15 °C/W - 1.5 °C/W = 13.5 °C/W with a thermal grease RTH (c - h) = 1 °C/W, we need a heatsink with RTH (h - a) = 12.5 °C/W. Revision: 24-Nov-2021 Document Number: 50081 2 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Preliminary LTO 100 H www.vishay.com Vishay Sfernice POWER RATING The temperature of the case should be maintained within the limits specified. To improve the thermal conductivity, surfaces in contact should be coated with a silicone grease and the torque applied on the screw for tightening should be around 1 Nm. Axis Title 10000 125 1000 75 1st line 2nd line 2nd line Rated Power (%) 100 50 100 25 10 0 0 20 40 60 80 100 120 140 160 175180 Case Temperature (°C) OVERLOADS In any case the applied voltage must be lower than the maximum overload voltage of 750 V. The values indicated on the graph below are applicable to resistors in air or mounted onto a heatsink. ENERGY CURVE Axis Title 100 10000 10 1st line 2nd line 2nd line Energy (J) 1000 1 100 0.1 0.01 0.0000001 10 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 Overloard Duration (s) POWER CURVE Axis Title 1 000 000 10000 100 000 1st line 2nd line 1st line Power (W) 1000 10 000 100 1000 100 0.0000001 10 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 Overload Duration (s) Revision: 24-Nov-2021 Document Number: 50081 3 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Preliminary LTO 100 H www.vishay.com Vishay Sfernice MARKING PACKAGING Model, style, resistance value (in Ω), tolerance (in %), manufacturing date, Vishay Sfernice trademark. Tube of 30 units ORDERING INFORMATION LTO 100 H 2.7 kΩ ±5% xxx TU30 e3 MODEL STYLE ENERGY RESISTANCE VALUE TOLERANCE CUSTOM DESIGN PACKAGING LEAD (Pb)-FREE ±2% ±5% ± 10 % Optional on request: special TCR, shape etc. GLOBAL PART NUMBER INFORMATION L T O 1 0 0 H 2 7 0 0 0 J T E 3 GLOBAL MODEL SIZE ENERGY OHMIC VALUE TOLERANCE PACKAGING LEAD (Pb)-FREE LTO 100 H = high pulse absorption The first four digits are significant figures and the last digit specifies the number of zeros to follow. R designates decimal point. 48R70 = 48.7 Ω 27000 = 2700 Ω = 2.7 kΩ G=2% J=5% K = 10 % T = tube E3 = pure tin Revision: 24-Nov-2021 Tube 30 pieces Document Number: 50081 4 For technical questions, contact: sferfixedresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000