LVR05R1000FS73

LVR www.vishay.com Vishay Dale Wirewound Resistors, Precision Power, Low Value, Commercial, Axial Lead FEATURES • Ideal for all types of current sensing applications including switching and linear power supplies, instruments and power amplifiers Available • Excellent load life stability • Low temperature coefficient Available • Low inductance • MIL-PRF-49465 qualified, type RLV resistors can be found at: www.vishay.com/doc?30283 LINKS TO ADDITIONAL RESOURCES Available Available • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 3D 3D Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details 3D Models STANDARD ELECTRICAL SPECIFICATIONS HISTORICAL MODEL POWER RATING P25 °C W RESISTANCE RANGE (1)  TOLERANCE ±% TECHNOLOGY WEIGHT (typical) g LVR01 LVR-1 1 0.01 to 0.1 (2) 1, 3, 5, 10 Metal strip 0.5 LVR03 LVR-3 3 0.005 to 0.2 1, 3, 5, 10 Metal strip 2 LVR05 LVR-5 5 0.005 to 0.3 1, 3, 5, 10 Metal strip 5 LVR10 LVR-10 10 0.01 to 0.25 (3) 1, 3, 5, 10 Coil spacewound 11 GLOBAL MODEL Notes (1) Resistance is measured 3/8" [9.52 mm] from the body of the resistor, or at 1.183" [30.05 mm], 1.315" [33.40 mm], 1.675" [42.545 mm] or 2.575" [65.405 mm] spacing for the LVR01, LVR03, LVR05 and LVR10 respectively (2) LVR01: standard resistance values are 0.01 , 0.015 , 0.02 , 0.025 , 0.03 , 0.033 , 0.04 , 0.05 , 0.051 , 0.06 , 0.068 , 0.07 , 0.08 , 0.09  and 0.1  with 1 % tolerance. Other resistance values may be available upon request (3) LVR-10: contact factory for resistance values beyond the 0.25  TECHNICAL SPECIFICATIONS PARAMETER UNIT LVR01 Operating Temperature Range °C -65 to +175 Dielectric Withstanding Voltage VAC 1000 Insulation Resistance  Short Time Overload - Terminal Strength (minimum) lb Maximum Working Voltage V LVR03 LVR05 LVR10 -65 to +275 1000 1000 1000 10 000 M minimum dry 5 x rated power for 5 s 5 10 10 x rated power for 5 s 10 10 (P x R)1/2 Note • LVR01, LVR03, and LVR05 are End of Life on May 22, 2021. LVR10 will still be supported Revision: 21-Apr-2021 Document Number: 30206 1 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LVR www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION Global Part Numbering Example: LVR055L000FS73 (visit www.vishay.net Vishay Dale parts numbering manual for all options) L V R 0 5 5 L 0 0 0 F S 7 3 GLOBAL MODEL VALUE TOLERANCE PACKAGING SPECIAL LVR01 LVR03 LVR05 LVR10 R = decimal L = m (values < 0.010 ) R1500 = 0.15  7L000 = 0.007 D = ± 0.5 % F = ± 1.0 % G = ± 2.0 % H = ± 3.0 % J = ± 5.0 % K = ± 10.0 % E12 = lead (Pb)-free bulk E03 = lead (Pb)-free lacer pack (LVR10) E70 = lead (Pb)-free, tape / reel 1000 pieces (LVR01, 03) E73 = lead (Pb)-free, tape / reel 500 piecesB12 = tin / lead bulk L03 = tin / lead lacer pack (LVR10) S70 = tin / lead, tape / reel 1000 pieces (LVR01, 03) S73 = tin / lead, tape/reel 500 pieces (dash number) (up to 3 digits) From 1 to 999 as applicable DIMENSIONS in inches [millimeters] DIMENSIONS in inches [millimeters] MODEL 1.50 [38.10] (1) minimum A C B A ± 0.010 [0.254] B ± 0.010 [0.254] C ± 0.002 [0.051] LVR01 0.427 [10.85] 0.115 [2.92] 0.020 [0.508] LVR03 0.560 [14.22] 0.205 [5.21] 0.032 [0.813] LVR05 0.925 [23.50] 0.330 [8.38] 0.040 [1.02] LVR10 1.828 [46.43] 0.392 [9.96] 0.040 [1.02] MATERIAL SPECIFICATIONS DERATING Element: self-supporting nickel-chrome alloy (LVR10 also utilizes manganin) RATED POWER IN % Note (1) On some standard reel pack methods, the leads may be trimmed to a shorter length than shown Encapsulation: high temperature mold compound Terminals: tinned copper Part Marking: Dale, model, wattage, value, tolerance, date code Packaging: Reference “Wirewound Through Hole Resistor Packaging” (www.vishay.com/doc?21028) 120 100 80 LVR03 LVR05 LVR10 60 40 LVR01 20 0 - 65 - 25 25 75 125 175 225 275 AMBIENT TEMPERATURE IN °C TEMPERATURE COEFFICIENT (ppm/°C) LVR01 LVR03 LVR05 LVR10 ± 1000 for 0.01  to 0.0249  ± 400 for 0.025  to 0.0499  ± 300 for 0.05  to 0.0749  ± 250 for 0.075  to 0.099  ± 150 for 0.1  to 0.1  ± 850 for 0.005  to 0.0099  ± 350 for 0.01  to 0.0249  ± 200 for 0.025  to 0.0499  ± 125 for 0.05  to 0.0749  ± 75 for 0.075  to 0.099  ± 50 for 0.1  to 0.2  ± 650 for 0.005  to 0.0099  ± 250 for 0.01  to 0.0249  ± 150 for 0.025  to 0.0499  ± 100 for 0.05  to 0.0749  ± 75 for 0.075  to 0.099  ± 50 for 0.1  to 0.3  ± 300 for 0.01  to 0.0249  ± 150 for 0.025  to 0.0499  ± 125 for 0.05  to 0.0749  ± 100 for 0.075  to 0.099  ± 50 for 0.1  to 0.25  Note • LVR01, LVR03, and LVR05 are End of Life on May 22, 2021. LVR10 will still be supported Revision: 21-Apr-2021 Document Number: 30206 2 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LVR www.vishay.com Vishay Dale PERFORMANCE TEST CONDITIONS OF TEST TEST LIMITS Thermal Shock -65 °C to +125 °C, 5 cycles, 15 min at each extreme ± (0.2 % + 0.0005 ) R Short Time Overload 5 x rated power (LVR01, 03, 05), 10 x rated power (LVR10) for 5 s ± (0.5 % + 0.0005 ) R Low Temperature Storage -65 °C for 24 h ± (0.2 % + 0.0005 ) R High Temperature Exposure 250 h at +275 °C (+175 °C for LVR01) ± (2.0 % + 0.0005 ) R Dielectric Withstanding Voltage 1000 VRMS, 1 min ± (0.1 % + 0.0005 ) R Insulation Resistance MIL-STD-202 Method 302, 100 V Moisture Resistance MIL-STD-202 Method 106, 7b not applicable ± (0.2 % + 0.0005 ) R 1000 M minimum Shock, Specified Pulse MIL-STD-202 Method 213, 100 g's for 6 ms, 10 shocks ± (0.1 % + 0.0005 ) R Vibration, High Frequency Frequency varied 10 Hz to 2000 Hz, 20 g peak, 2 directions 6 h each ± (0.1 % + 0.0005 ) R Load Life 2000 h at rated power, +25 °C, 1.5 h “ON”, 0.5 h “OFF” ± (2.0 % + 0.0005 ) R Bias Humidity +85 °C, 85 % RH, 10 % bias, 1000 h ± (1.0 % + 0.0005 ) R Note • LVR01, LVR03, and LVR05 are End of Life on May 22, 2021. LVR10 will still be supported Revision: 21-Apr-2021 Document Number: 30206 3 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000