MB20H100CT, MF20H100CT
www.vishay.com
Vishay General Semiconductor
Dual Common Cathode High Voltage Schottky Rectifier
High Barrier Technology for Improved High Temperature Performance
FEATURES
D2PAK (TO-263AB)
ITO-220AB
•
•
•
•
•
•
•
K
2
1
2
• Meets MSL level 1, per J-STD-020, LF maximum peak of
245 °C (for D2PAK (TO-263AB) package)
MB20H100CT
MF20H100CT
PIN 1
1
3
K
PIN 1
PIN 2
PIN 2
PIN 3
Power pack
Guardring for overvoltage protection
Low power loss, high efficiency
Low forward voltage drop
Low leakage current
High forward surge capability
High frequency operation
• Solder bath temperature 275 °C maximum, 10 s, per
JESD 22-B106 (for ITO-220AB package)
HEATSINK
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
PRIMARY CHARACTERISTICS
IF(AV)
2 x 10 A
VRRM
100 V
IFSM
250 A
IR
4.5 μA
VF
0.64
TJ max.
175 °C
Package
D2PAK (TO-263AB), ITO-220AB
Circuit configuration
Common cathode
For use in high frequency rectifier of switching mode power
supplies, freewheeling diodes, DC/DC converters and
polarity protection application.
MECHANICAL DATA
Case: ITO-220AB, D2PAK (TO-263AB)
Molding compound meets UL 94 V-0 flammability rating
Base P/NHE3_X - RoHS-compliant, AEC-Q101 qualified
(“_X” denotes revision code e.g. A, B,.....)
Terminals: matte tin plated leads, solderable
J-STD-002 and JESD 22-B102
HE3 suffix meets JESD 201 class 2 whisker test
per
Polarity: as marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
MB20H100CT
Maximum repetitive peak reverse voltage
VRRM
100
Working peak reverse voltage
VRWM
100
Maximum DC blocking voltage
VDC
100
Maximum average forward rectified current
total device
per diode
Peak forward surge current 8.3 ms single half sine-wave superimposed on
rated load
IF(AV)
IFSM
UNIT
V
20
10
250
A
Peak repetitive reverse current per diode at tp = 2.0 µs, 1 kHz
IRRM
1.0
Voltage rate of change (rated VR)
dV/dt
10 000
V/μs
TJ. TSTG
-65 to +175
°C
VAC
1500
V
Operating junction and storage temperature range
Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min
Revision: 12-Sep-2018
Document Number: 87736
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MB20H100CT, MF20H100CT
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Maximum instantaneous forward voltage per diode
Maximum reverse current at working peak reverse
voltage per diode
VF (1)
IR (2)
TEST CONDITIONS
VALUE
IF = 10 A
TC = 25 °C
0.77
IF = 10 A
TC = 125 °C
0.64
IF = 20 A
TC = 25 °C
0.88
IF = 20 A
TC = 125 °C
0.73
Rated VR
UNIT
V
TJ = 25 °C
4.5
μA
TJ = 125 °C
6.0
mA
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width 40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance per diode
SYMBOL
MB
MF
UNIT
RJC
2.0
5.8
°C/W
ORDERING INFORMATION (Example)
PACKAGE
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
ITO-220AB
MF20H100CTHE3_B/P (1)
PREFERRED P/N
1.99
P
50/tube
Tube
TO-263AB
MB20H100CTHE3_B/P (1)
1.35
P
50/tube
Tube
TO-263AB
MB20H100CTHE3_B/I (1)
1.35
I
800/reel
Tape and reel
Note
(1) AEC-Q101 qualified
Revision: 12-Sep-2018
Document Number: 87736
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MB20H100CT, MF20H100CT
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
10 000
20
Instantaneous Reverse Current (µA)
Average Forward Current (A)
Resistive or Inductive Load
16
MB
12
8
4
MF
TJ = 125 °C
100
TJ = 100 °C
10
1
0.1
TJ = 25 °C
0.01
0
0
50
100
150
20
180
40
60
80
100
Case Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Forward Current Derating Curve
Fig. 4 - Typical Reverse Characteristics Per Diode
300
10 000
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
250
Junction Capacitance (pF)
Peak Forward Surge Current (A)
TJ = 150 °C
1000
200
150
100
50
0
10
1
1000
100
10
100
0.1
1
10
100
Number of Cycles at 60 Hz
Reverse Voltage (V)
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
Per Diode
Fig. 5 - Typical Junction Capacitance Per Diode
100
Transient Thermal Impedance (°C/W)
Instantaneous Forward Current (A)
100
TJ = 175 °C
10
TJ = 125 °C
TJ = 150 °C
TJ = 100 °C
1
TJ = 25 °C
0.1
0.01
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
10
1
0.1
0.01
0.1
1
10
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics
Per Diode
Fig. 6 - Typical Transient Thermal Impedance Per Diode
Revision: 12-Sep-2018
Document Number: 87736
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MB20H100CT, MF20H100CT
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
ITO-220AB
0.404 (10.26)
0.384 (9.75)
0.076 (1.93) REF.
7° REF.
0.076 (1.93) REF.
45° REF.
0.140 (3.56) DIA.
0.125 (3.17) DIA.
0.600 (15.24)
0.580 (14.73)
0.671 (17.04)
0.651 (16.54)
PIN
1
2
3
0.057 (1.45)
0.045 (1.14)
0.105 (2.67)
0.095 (2.41)
0.028 (0.71)
0.020 (0.51)
0.205 (5.21)
0.195 (4.95)
D2PAK (TO-263AB)
0.411 (10.45)
0.380 (9.65)
7° REF.
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.035 (0.89)
0.025 (0.64)
0.025 (0.64)
0.015 (0.38)
0.135 (3.43) DIA.
0.122 (3.08) DIA.
7° REF.
0.350 (8.89)
0.330 (8.38)
0.191 (4.85)
0.171 (4.35)
0.560 (14.22)
0.530 (13.46)
0.190 (4.83)
0.170 (4.32)
0.110 (2.79)
0.100 (2.54)
0.190 (4.83)
0.160 (4.06)
0.245 (6.22)
MIN.
Mounting Pad Layout
0.42 (10.66) min.
0.055 (1.40)
0.045 (1.14)
K
0.33 (8.38) min.
0.360 (9.14)
0.320 (8.13)
1
K
2
0.624 (15.85)
0.591 (15.00)
0.670 (17.02)
0.591 (15.00)
0 to 0.01 (0 to 0.254)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
0.055 (1.40)
0.047 (1.19)
0.205 (5.20)
0.195 (4.95)
0.140 (3.56)
0.110 (2.79)
0.15 (3.81) min.
0.08 (2.032) MIN.
0.105 (2.67)
0.095 (2.41)
Revision: 12-Sep-2018
Document Number: 87736
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
1
Document Number: 91000