43
www.vishay.com
Vishay Spectrol
3/4" Rectangular (19 mm) Multi-Turn Cermet Trimmer
FEATURES
• 0.75 W at 70 °C
• Wide ohmic value range (10 to 5 M)
• Panel mount available
• Multi-finger wiper for better C.R.V.
• Tests according to CECC 41000 or IEC 60393-1
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DESIGN SUPPORT TOOLS
click logo to get started
Models
Available
DIMENSIONS in millimeters (inches) ± 0.5 mm (± 0.02")
Ø 0.5
(0.02)
1
2
3
Shaft
1.5 (0.06)
0.6 (0.02)
0.6 (0.02)
4.8 (0.19) ± 0.2
6.4 (0.25)
± 0.2
Base level
Ø 2.5 (0.1)
4.8 (0.19) ± 0.2
T 601
2.54 (0.1) ± 0.2 (1)
5.21 ± 0.25
(0.205 ± 0.010)
7.62 ± 0.25
(0.300 ± 0.010)
Internal tooth
lock washer
19 (0.748)
5.3 (0.2)
± 0.9 (0.035)
Ø 2.94
(0.116)
3.15 (0.125) (1)
7.6 (0.3)
± 0.2 (1)
10-32 NF hex nut
1.14
(0.045)
5.1 (0.2)
± 0.2 (1)
Ø 7.01 ± 0.25
(0.276 ± 0.010)
Through to
std. shaft
Ø 4.83
(10-32 NF)
Note
(1) To be measured at base level
Revision: 31-Aug-2018
Document Number: 57026
1
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
43
www.vishay.com
Vishay Spectrol
ELECTRICAL SPECIFICATIONS
Resistive element
Cermet
Electrical travel
15 turns ± 1
10 to 5 M
Resistance range
Standard series E3
Tolerance
1-2-5
Standard
± 10 %
Linear
0.75 W at +70 °C
Power rating
POWER IN W
0.75
0.50
0.25
0
0
60 70 80
40
20
100
125 140
AMBIENT TEMPERATURE IN °C
c
a
Circuit diagram
(3)
(1)
cw
b
(2)
Temperature coefficient
See Standard Resistance Element table
Limiting element voltage (linear law)
Contact resistance variation
End resistance (typical)
Dielectric strength (RMS)
Insulation resistance (500 VDC)
400 V
1 % Rn or 1 max.
1 % or 2
1000 V
103
M min.
MECHANICAL SPECIFICATIONS
Mechanical travel
Operating torque (max. Ncm)
End stop torque
18 turns ± 5
3.5
Clutch action
Net weight (max. g)
1.2
Wiper (actual travel)
Positioned at approx. 50 %
Terminals
Pure Sn (code e3)
ENVIRONMENTAL SPECIFICATIONS
Temperature range
Climatic category
Sealing
Revision: 31-Aug-2018
-55 °C to +125 °C
55/125/4
Fully sealed - IP67
Document Number: 57026
2
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
43
www.vishay.com
Vishay Spectrol
PERFORMANCES
TESTS
TYPICAL VALUES AND DRIFTS
CONDITIONS
RT/RT (%)
V1-2/V1-3 (%)
OTHER
Load life
1000 h at rated power
90'/30' - ambient temp. 70 °C
±4%
-
-
Humidity
4 days
±3%
-
Dielectric strength: 1000 VRMS
Insulation resistance: > 20 M
5 cycles
-55 °C to +125 °C
± 0.5 %
±2%
-
50 g at 11 ms
3 successive shocks
in 3 directions
±2%
±2%
-
10 Hz to 55 Hz
0.75 mm or 10 g
during 6 h
±2%
±2%
-
200 cycles
± (3 % + 1 )
-
Contact res. variation: < 1 % Rn
Rapid temperature change
Shock
Vibration
Rotational life
Note
• Nothing stated herein shall be construed as a guarantee of quality or durability
STANDARD RESISTANCE ELEMENT DATA
STANDARD
RESISTANCE
VALUES
LINEAR LAW
MAX.
MAX.
POWER WORKING
AT 70 °C VOLTAGE
MAX.
WIPER
CUR.
TYPICAL
TCR
-55 °C
+125 °C
ppm/°C
W
V
mA
10
0.75
2.74
274
20
0.75
3.87
194
50
0.75
6.12
122
100
0.75
8.66
87
200
0.75
12.2
61
500
0.75
19.4
39
1K
0.75
27.4
27
2K
0.75
38.7
19
5K
0.75
61.2
12
10K
0.75
86.6
8.7
20K
0.75
122
6.1
50K
0.75
194
3.9
100K
0.75
274
2.7
200K
0.75
387
1.9
500K
0.32
400
0.8
1M
0.16
400
0.4
2M
0.08
400
0.2
4M
0.03
400
0.08
Revision: 31-Aug-2018
MARKING
• Vishay trademark
• Vishay part number or model, ohmic value code and
tolerance code
• Manufacturing date
• Marking of terminals 1 and/or 3
PACKAGING
• In box of 200 pieces code B40 (BO200)
On request:
• In box of 100 pieces code B30 (BO100)
± 100
• In tube of 25 pieces code T10 (TU25)
Document Number: 57026
3
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
43
www.vishay.com
Vishay Spectrol
ORDERING INFORMATION (Part Number)
M
4
3
P
1
0
3
K
B
4
0
T
6
0
Model
STYLE
OHMIC VALUE
TOLERANCE
PACKAGING
M43
P
From
100 to 5 M
103 = 10 k
K = 10 %
B40 = box 200 pieces
On request:
B30 = box 100 pieces
T10 = tube 25 pieces
1
SPECIAL
NUMBER
(If applicable)
Given by
Vishay
for custom
design
DESCRIPTION (for information only)
43
P
10K
10 %
T601
BO100
e3
MODEL
STYLE
VALUE
TOLERANCE
SPECIAL
PACKAGING
LEAD FINISH
RELATED DOCUMENTS
APPLICATION NOTES
Potentiometers and Trimmers
www.vishay.com/doc?51001
Guidelines for Vishay Sfernice Resistive and Inductive Components
www.vishay.com/doc?52029
Revision: 31-Aug-2018
Document Number: 57026
4
For technical questions, contact: sferpottrimmers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
很抱歉,暂时无法提供与“M43P104KB40”相匹配的价格&库存,您可以联系我们找货
免费人工找货