0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
M55342E03B200BRT0

M55342E03B200BRT0

  • 厂商:

    TFUNK(威世)

  • 封装:

    1005

  • 描述:

    贴片电阻 - 200KΩ ±0.1% 1/5W ±25ppm/℃

  • 详情介绍
  • 数据手册
  • 价格&库存
M55342E03B200BRT0 数据手册
E/H (Military M/D55342) www.vishay.com Vishay Dale Thin Film QPL MIL-PRF-55342 Qualified Thin Film Resistor, Surface-Mount Chip FEATURES • Established reliability, “S” and “V” failure rate level (10 ppm), C = 2 • High purity alumina substrate • Wraparound termination featuring a tenacious adhesion layer covered with an electroplated nickel barrier layer for +150 °C operating conditions • Very low noise and voltage coefficient (< -25 dB, 0.5 ppm/V) ADDITIONAL RESOURCES • Non-inductive 3D 3D • Laser-trimmed tolerances ± 0.1 % 3D Models • Wraparound resistance less than 0.010  typical Thin Film Mil chip resistors feature all sputtered wraparound termination for excellent adhesion and dimensional uniformity. They are ideal in applications requiring stringent performance requirements. Established reliability is assured through 100 % screening and extensive environmental lot testing. • In-lot tracking less than 5 ppm/°C • Complete MIL-testing available in-house • Antistatic waffle pack or tape and reel packaging available • Military / aerospace / QPL CONSTRUCTION Passivation TYPICAL PERFORMANCE Resistor Film Solder Coating ABSOLUTE Nickel Barrier High Purity Alumina Substrate Adhesion Layer TCR 25 TOL. 0.1 STANDARD ELECTRICAL SPECIFICATIONS TEST Material Resistance Range TCR: Absolute Tolerance: Absolute Stability: Absolute Stability: Ratio SPECIFICATIONS CONDITIONS Tamelox resistor film (passivated nichrome) - 10  to 6.19 M - ± 25 ppm/°C to ± 300 ppm/°C -55 °C to +125 °C ± 0.1 % to ± 10 % +25 °C R ± 0.02 % 2000 h at +70 °C - - 0.1 ppm/V - 30 V to 200 V - Operating Temperature Range -55 °C to +150 °C - Storage Temperature Range -55 °C to +150 °C - < - 25 dB - R ± 0.01 % 1 year at +25 °C Voltage Coefficient Working Voltage Noise Shelf Life Stability: Absolute Revision: 20-Sep-2019 Document Number: 60018 1 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 E/H (Military M/D55342) www.vishay.com Vishay Dale Thin Film COMPONENT RATINGS CASE SIZE M55342/01 M55342/02 M55342/03 M55342/04 M55342/05 M55342/06 D55342/07 M55342/08 M55342/09 M55342/10 M55342/11 M55342/12 RESISTANCE RANGE () BY CHARACTERISTICS TOLERANCE WORKING VOLTAGE E E H, K, L, M H, K, L, M (V) (0.1 %, 0.25 %, 0.5 %) (1 %, 2 %, 5 %) (0.1 %, 0.25 %, 0.5 %) (1 %, 2 %, 5 %) 40 49.9 to 150K 49.9 to 150K 20 to 150K 20 to 150K 40 49.9 to 301K 49.9 to 301K 20 to 301K 20 to 301K 75 49.9 to 649K 49.9 to 649K 10 to 649K 10 to 649K 125 49.9 to 1.69M 49.9 to 1.69M 10 to 1.69M 10 to 1.69M 175 49.9 to 3.16M 49.9 to 3.16M 10 to 3.16M 10 to 3.16M 50 49.9 to 475K 49.9 to 475K 10 to 475K 10 to 475K 100 49.9 to 1.5M 49.9 to 1.5M 10 to 1.5M 10 to 1.5M 150 49.9 to 4.02M 49.9 to 4.02M 10 to 4.02M 10 to 4.02M 200 49.9 to 6.19M 49.9 to 6.19M 10 to 6.19M 10 to 6.19M 75 49.9 to 1M 49.9 to 1M 49.9 to 1M 49.9 to 1M 30 49.9 to 100K 49.9 to 100K 20 to 100K 20 to 100K 50 49.9 to 258K 49.9 to 261K 10 to 258K 10 to 261K POWER RATING (mW) 50 125 200 150 225 150 250 800 1000 500 50 100 Note • Values listed are a guide, refer to MIL spec for value / tolerance allowance DIMENSIONS in inches D W T E L CASE SIZE M55342/01 M55342/02 M55342/03 M55342/04 M55342/05 M55342/06 D55342/07 M55342/08 M55342/09 M55342/10 M55342/11 M55342/12 TERM. B B B B B B B B B B B B L 0.055 ± 0.006 0.055 ± 0.006 0.105 ± 0.007 0.155 ± 0.007 0.230 ± 0.007 0.080 ± 0.006 0.126 ± 0.008 0.209 + 0.009/- 0.018 0.259 + 0.009/- 0.015 0.105 ± 0.007 0.040 ± 0.005 0.064 ± 0.006 W 0.025 ± 0.005 0.050 ± 0.005 0.050 ± 0.005 0.050 ± 0.005 0.075 ± 0.005 0.050 ± 0.005 0.063 ± 0.005 0.098 ± 0.005 0.124 ± 0.005 0.100 ± 0.005 0.022 ± 0.005 0.032 ± 0.005 T 0.010 to 0.033 0.010 to 0.033 0.010 to 0.033 0.015 to 0.033 0.010 to 0.033 0.010 to 0.033 0.010 to 0.033 0.010 to 0.033 0.010 to 0.033 0.010 to 0.033 0.010 to 0.033 0.010 to 0.033 D E 0.010 ± 0.005 0.015 ± 0.005 0.010 ± 0.005 0.015 ± 0.005 0.015 ± 0.005 0.015 ± 0.005 0.015 ± 0.005 0.015 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 0.016 ± 0.008 0.015 ± 0.005 0.020 + 0.005 / - 0.010 0.020 + 0.005 / - 0.010 0.020 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 0.020 ± 0.005 0.015 ± 0.005 0.015 ± 0.005 0.010 ± 0.005 0.010 ± 0.005 0.012 ± 0.005 0.015 ± 0.005 ENVIRONMENTAL TESTS MIL-PRF-55342 LIMITS (R ±) 0.1 % 0.1 % 0.1 % 0.1 % 0.2 % 0.2 % ± 25 ppm/°C 0.5 % 2.0 % ENVIRONMENTAL TEST Thermal Shock Low Temperature Operation Short Time Overload High Temperature Exposure Resistance to Bonding Moisture Resistance TCR Life (2000 h at + 70 °C) Life (10 000 h at + 70 °C) VISHAY PERFORMANCE (R ±) 0.020 % 0.025 % 0.050 % 0.009 % 0.006 % 0.004 % < 15 ppm/°C 0.02 % 0.04 % MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Chip Terminations Fused Solder Revision: 20-Sep-2019 Tamelox Alumina Solder over nickel Tin / lead solder alloy FSCM CAGE # - 57489 Document Number: 60018 2 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 E/H (Military M/D55342) www.vishay.com Vishay Dale Thin Film Percent of Rated Wattage DERATING 100 80 60 40 20 0 -75 -50 -25 0 25 50 75 100 125 150 175 Ambient Temperature °C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: M55342E06B1C00RTS M 5 5 3 GLOBAL TCR MODEL CHARACTERISTIC M55342 or D55342 (/07 size only) E = 25 ppm/°C H = 50 ppm/°C K = 100 ppm/°C L = 200 ppm/°C M = 300 ppm/°C 4 2 E 0 CASE SIZE TERMINATION 01 = 0502 02 = 0505 03 = 1005 04 = 1505 05 = 2208 06 = 0705 07 = 1206 08 = 2010 09 = 2512 10 = 1010 11 = 0402 12 = 0603 B = solderable 6 B 1 C 0 0 FAILURE RATE OHMIC VALUE Three digits and a letter. Letter M = 1.0 % identifies tolerance, acts as per 1000 h multiplier and decimal locator. P = 0.1 % per 1000 h MULTIPLIER R = 0.01 % Tolerance 1  1 k 1 M per 1000 h U = 0.01 % 0.1 % A B C per 1000 h (3) 0.25 % R U V S = 0.001 % 0.5 % W Y Z per 1000 h V = 0.001 % 1% D E F per 1000 h (3) 2% G H T C = non ER version 5% J K L 10 % M R N P T S V THIN FILM CODE (1) PACKAGING Standard Packaging: V for BS = BULK K, L and M 100 min., 1 mult. TCR WS =WAFFLE W/tolerance 100 min., 1 mult. 1% W0 =WAFFLE  M = part 100 min.,100 mult. marked (2) TAPE AND REEL T0 = 100 min., 100 mult. T1 = 1000 min., 1000 mult. T3 = 300 min., 300 mult. T5 = 500 min., 500 mult. TF = Full reel (2K, 4K, or 5K dependent on case size) per tape and reel document 60034 TS = 100 min., 1 mult. Special Packaging: WAFFLE WI = 100 min., 1 mult. (item single lot date code) WP =100 min., 1 mult. (package unit single lot  date code) TAPE AND REEL TI = 100 min., 1 mult. (item single lot date code) TP = 100 min., 1 mult. (package unit single lot  date code) Historical Part Number example: M55342K06B5E60R (for reference purposes only) M55342 K 06 B 5E60 R SERIES TCR CHARACTERISTIC CASE SIZE TERMINATION VALUE AND TOLERANCE FAILURE RATE Notes • For M/D55342 T-level failure rate options please see VTF E/H (T-level) datasheet: www.vishay.com/ppg?60060 (1) Only add a V at the end of part number to specify Vishay Dale Thin Film for K, L and M TCR and tolerance 1 % and higher (2) Option 1 marking only. Case sizes 01, 02, 11, and 12 not available due to size (3) Failure rate U and V require group A and B testing on a production lot basis Revision: 20-Sep-2019 Document Number: 60018 3 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: CMF7068K100FKEK
M55342E03B200BRT0
物料型号: Vishay Dale Thin Film Resistor, Military M/D55342 Qualified, 表面贴装芯片。

器件简介: 这些薄膜电阻器采用全溅射环绕终止技术,具有出色的粘附力和尺寸一致性。它们非常适合需要严格性能要求的应用,通过100%筛选和广泛的环境批次测试确保了可靠性。

引脚分配: 文档中没有提供具体的引脚分配图,但提到了电阻器的封装尺寸和端接方式,例如M55342/01至M55342/12等不同尺寸的封装。

参数特性: - 电阻范围: 10Ω至6.19MΩ - 温度系数(TCR): ±25 ppm/°C至±300 ppm/°C (-55°C至+125°C) - 绝对容差: ±0.1%至±10% - 稳定性: 在+70°C下2000小时后绝对变化为±0.02% - 电压系数: 0.1 ppm/V - 工作电压: 30V至200V - 工作温度范围: -55°C至+150°C - 存储温度范围: -55°C至+150°C - 噪声: <-25dB

功能详解: - 电阻器具有非常低的噪声和电压系数。 - 激光修调的容差为±0.1%。 - 环绕电阻小于0.010Ω(典型值)。 - 批次内跟踪小于5 ppm/°C。

应用信息: 适用于军事/航空/QPL(合格产品清单)。

封装信息: 提供了不同尺寸的封装,包括E、H、K、L、M等,以及它们的功率等级、工作电压和电阻范围。
M55342E03B200BRT0 价格&库存

很抱歉,暂时无法提供与“M55342E03B200BRT0”相匹配的价格&库存,您可以联系我们找货

免费人工找货