M63P503KB40

63 www.vishay.com Vishay Spectrol 3/8" Square (10 mm) Single-Turn Cermet Trimmer FEATURES • Arrow and graduations for repeatable settings • “O” ring seal for solvent and aqueous washing • Rigid board mounting achieved with pins secured in housing • Multi-finger wiper for better contact resistance • Solid end stop • Tests according to CECC 41000 or IEC 60393-1 DESIGN SUPPORT TOOLS • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 click logo to get started Models Available The Model 63 cermet trimmer is available in several pin configurations for top or side adjustment and with a choice of Knob styles for finger setting. Quick adjustment is achieved with multi-finger wiper and the standard resistance range is between 100  and 2 M with a tolerance of ± 10 %. DIMENSIONS in inches (millimeters) ± 0.02" (0.5 mm) T607 (all pin styles) 0.01 (0.25) 0.190 (4.83) 0.188 (4.78) min. 0.395 (10.03) 0.2 ± 0.010 (5.1 ± 0.25) Ø 0.330 (8.38) 0.020 x 0.012 (0.51 x 0.30) 0.410 (10.41) 63P 63X 0.100 (2.54) 0.375 (9.52) 0.01 (0.25) T640 (pin styles P and M) 0.100 (2.54) 0.177 (4.5) 0.100 (2.54) 0.375 (9.52) 0.045 (1.14) Ø 0.550 (13.97) 0.320 (8.13) 63M T614 (all pin styles) 63S 0.100 (2.54) 0.100 (2.54) 0.100 (2.54) Revision: 26-Jan-18 0.40 (1.02) 0.119 (3.02) Document Number: 57027 1 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 63 www.vishay.com Vishay Spectrol ELECTRICAL SPECIFICATIONS Effective travel 270° nominal 100  to 2 M Resistance range Resistance tolerance ± 10 % 2  or 1 % whichever is greater End resistance Temperature coefficient of resistance (typical) ± 100 ppm/°C 0.5 W at +70 °C derated linearly to 0 W at 125 °C maximum voltage not to exceed 250 V Power rating c a Circuit diagram (1) (3) b (2) Dielectric withstand voltage cw 1000 VAC at sea level; 250 VAC at 80 000 ft (24 000 m) Insulation resistance (500 VDC) 1000 M minimum 1 % or 1 , whichever is greater Contact resistance variation MECHANICAL SPECIFICATIONS Mechanical travel 300° ± 50 Starting torque 35 mNm max. Weight 0.03 oz. (0.85 g) max. Resistance element Cermet 2 terminal adjustability ± 0.15 % of RT 3 terminal adjustability ± 0.05 % of applied voltage Terminals Pure Sn (code e3) ENVIRONMENTAL SPECIFICATIONS Temperature range -55 °C to +125 °C Climatic category 55/125/21 Sealing IP64 PERFORMANCES TESTS Vibration Electrical endurance Soldering Resistance to heat Damp heat steady state Mechanical life CHANGE PER CECC CONDITIONS MAX. (R) VAB/VAC 98 m/s2, 10 Hz to 500 Hz 1% 2% 1000 h 3% - - - - PER IEC PER MIL (PARA 2.3.2) Test FC (IEC 6-2-6) Method 204 (PARA 2.5.16) - No equiv. (PARA 2.3.7) Test TB (IEC 68-2-20) Method 208 41100 - 1% - (PARA 2.3.7) Test B (IEC 68-2-20A) Method 210 21 days 3% - (PARA 2.1) Test C (IEC 68-2-3) Method 103 200 cycles 3% - - Method 2 - - - - Terminal strength 2.2 lbs. (1 kg) min. Note • Nothing stated herein shall be construed as a guarantee of quality or durability MARKING • • • • • • Vishay trademark Model Resistance value Tolerance Date code Terminal identification Revision: 26-Jan-18 Document Number: 57027 2 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 63 www.vishay.com Vishay Spectrol PACKAGING • In box of 200 pieces code B40 (BO200) • On request : In box of 100 pieces code B30 (BO100) In tube of 50 pieces code T20 (TU50) ORDERING INFORMATION (Part Number) M 6 3 P 2 0 1 K B 4 0 T 6 Model STYLE OHMIC VALUE TOLERANCE PACKAGING CODE M63 P M X S From 100  to 2 M 201 = 200R K = 10 % B40 = box 200 pieces On request: B30 = box 100 pieces T20 = tube 50 pieces 7 0 SPECIAL NUMBER (If applicable) Given by Vishay for custom design DESCRIPTION (for information only) 63 P 200U 10 % T607 BO200 e3 MODEL STYLE VALUE TOLERANCE SPECIAL PACKAGING LEAD FINISH RELATED DOCUMENTS APPLICATION NOTES Potentiometers and Trimmers www.vishay.com/doc?51001 Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029 Revision: 26-Jan-18 Document Number: 57027 3 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000