093 PMG-SI
www.vishay.com
Vishay BCcomponents
Aluminum Electrolytic Capacitors
Power Miniaturized General Purpose Snap-In
FEATURES
• Useful life: 2000 h at 85 °C
• Polarized aluminum electrolytic capacitors,
non-solid electrolyte
• Large
types,
miniaturized
dimensions,
cylindrical aluminum case insulated with a blue sleeve
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
094
longer
life
APPLICATIONS
159
• Consumer electronics
• Whitegood motor control
105 °C
093
105 °C
• Electronic drives
• SMPS / UPS
longer
life
157
MARKING
The capacitors are marked (where possible) with the
following information:
Fig. 1
QUICK REFERENCE DATA
DESCRIPTION
Nominal case size (Ø D x L in mm)
Rated capacitance range, CR
Tolerance on CR
Rated voltage range, UR
Category temperature range
Endurance test at 85 °C
Useful life at 85 °C
Useful life at 40 °C and
1.4 x IR applied
Shelf life at 0 V, 85 °C
Max. RMS value of ripple voltage
Based on sectional specification
• Rated capacitance (in μF)
VALUE
22 x 25 to 35 x 50
68 μF to 2200 μF
± 20 %
200 V to 450 V
-25 °C to +85 °C
2000 h
2000 h
36 000 h
• Tolerance on rated capacitance, code letter in accordance
with IEC 60062 (M for ± 20 %)
• Rated voltage (in V)
• Date code
• Name of manufacturer
• “-” sign to identify the negative terminal, visible from the
top and side of the capacitor
• Code number (last 8 digits)
500 h
12 V
IEC 60384-4 / EN 130300/W
of JISC5141
• Maximum operating temperature
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(μF)
68
82
100
200
-
250
-
UR (V)
400
22 x 25
22 x 25
420
22 x 25
120
-
-
-
-
150
-
-
22 x 30
25 x 25
-
22 x 35
450
22 x 25
22 x 30
22 x 30
25 x 25
180
-
-
22 x 35
25 x 30
22 x 35
25 x 30
22 x 40
25 x 30
30 x 25
220
-
22 x 25
22 x 40
25 x 30
30 x 25
25 x 35
30 x 25
22 x 50
25 x 35
270
22 x 25
22 x 30
22 x 50
22 x 50
30 x 30
30 x 30
35 x 25
330
-
22 x 35
25 x 40
30 x 30
35 x 25
25 x 50
30 x 35
25 x 50
35 x 30
Revision: 11-Nov-16
Document Number: 28383
1
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
093 PMG-SI
www.vishay.com
Vishay BCcomponents
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
200
250
390
22 x 30
25 x 25
22 x 35
25 x 30
470
22 x 35
25 x 35
560
25 x 30
25 x 40
680
820
1000
1200
1500
25 x 35
25 x 40
30 x 35
30 x 40
30 x 45
30 x 50
35 x 40
35 x 45
30 x 30
30 x 35
30 x 40
35 x 40
35 x 45
UR (V)
400
25 x 50
30 x 35
35 x 30
30 x 40
35 x 30
30 x 45
35 x 35
35 x 40
35 x 50
-
35 x 50
-
CR
(μF)
1800
2200
420
450
35 x 30
30 x 40
35 x 35
35 x 35
35 x 40
30 x 50
35 x 40
35 x 45
-
35 x 45
-
-
-
-
-
-
35 x 50
-
DIMENSIONS in millimeters AND AVAILABLE FORMS
ØD
+ Terminal
10
± 0.1
L + 2 max.
L
- Terminal
Bottom view
5.3 + 1 mm
The minus and/or plus terminal can be marked with an imprinted sign
Ø 2 ± 0.1 (2 ×)
Fig. 2 - Two terminal snap-in
Fig. 3 - Mounting hole diagram
Table 1
DIMENSIONS in millimeters, MASS, AND PACKAGING QUANTITIES
NOMINAL CASE SIZE
ØDxL
22 x 25
22 x 30
22 x 35
22 x 40
22 x 45
22 x 50
25 x 25
25 x 30
25 x 35
25 x 40
25 x 45
25 x 50
30 x 25
30 x 30
30 x 35
30 x 40
30 x 45
30 x 50
35 x 25
35 x 30
35 x 35
35 x 40
35 x 45
35 x 50
Revision: 11-Nov-16
Ø Dmax.
Lmax.
23.0
23.0
23.0
23.0
23.0
23.0
26.0
26.0
26.0
26.0
26.0
26.0
31.0
31.0
31.0
31.0
31.0
31.0
36.0
36.0
36.0
36.0
36.0
36.0
27
32
37
42
47
52
27
32
37
42
47
52
27
32
37
42
47
52
27
32
37
42
47
52
MASS
(g)
12
16
20
23
26
29
20
22
24
27
32
38
25
30
35
40
45
50
33
40
48
55
63
72
PACKAGING QUANTITIES
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
50
50
CARDBOARD BOX DIMENSIONS
LxWxH
260 x 250 x 39
260 x 250 x 44
260 x 250 x 49
260 x 250 x 54
260 x 250 x 59
260 x 250 x 64
290 x 280 x 39
290 x 280 x 44
290 x 280 x 49
290 x 280 x 54
290 x 280 x 59
290 x 280 x 64
340 x 330 x 39
340 x 330 x 44
340 x 330 x 49
340 x 330 x 54
340 x 330 x 59
340 x 330 x 64
390 x 198 x 39
390 x 198 x 44
390 x 198 x 49
390 x 198 x 54
390 x 198 x 59
390 x 198 x 64
Document Number: 28383
2
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
093 PMG-SI
www.vishay.com
Vishay BCcomponents
ORDERING EXAMPLE
ELECTRICAL DATA
SYMBOL
Electrolytic capacitor 093 series
DESCRIPTION
CR
Rated capacitance at 120 Hz
330 μF / 400 V; ± 20 %
IR
Rated RMS ripple current at 120 Hz, 85 °C
Nominal case size: Ø 25 mm x 40 mm
Max. leakage current after 5 min at UR
2-terminal snap-in:
Max. equivalent series resistance at 120 Hz (1)
Ordering code: MAL2 09346331E3
Former 12 NC: 2222 09346331
IL5
ESR
Notes
• Unless otherwise specified, all electrical values in Table 2 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %
(1) ESR at 100 Hz is approximately 1.05 x ESR 120 Hz
Table 2
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
200
250
400
CR
120 Hz
(μF)
270
390
390
470
560
680
820
1000
1200
1500
1800
1800
2200
220
270
330
390
390
470
560
680
820
1000
1200
1500
1800
68
100
150
150
180
180
220
220
220
270
330
330
330
390
390
390
470
470
560
560
680
820
NOMINAL
CASE SIZE
ØDxL
(mm)
22 x 25
22 x 30
25 x 25
22 x 35
25 x 30
25 x 35
25 x 40
30 x 35
30 x 40
30 x 45
30 x 50
35 x 40
35 x 45
22 x 25
22 x 30
22 x 35
22 x 35
25 x 30
25 x 35
25 x 40
30 x 30
30 x 35
30 x 40
35 x 40
35 x 45
35 x 50
22 x 25
22 x 25
22 x 30
25 x 25
22 x 35
25 x 30
22 x 40
25 x 30
30 x 25
22 x 50
25 x 40
30 x 30
35 x 25
25 x 50
30 x 35
35 x 30
30 x 40
35 x 30
30 x 45
35 x 35
35 x 40
35 x 50
IR
120 Hz
(A)
IL5
(mA)
MAX. ESR (1)
120 Hz
()
MAX. Z
10 kHz
()
ORDERING CODE
MAL2093.......
1.26
1.55
1.46
1.78
1.83
2.06
2.36
2.35
2.69
3.00
3.36
2.91
3.23
1.18
1.37
1.58
1.67
1.64
1.85
2.11
2.01
2.23
2.56
3.82
3.08
3.35
0.80
0.98
1.11
1.10
1.26
1.27
1.46
1.38
1.43
1.58
1.82
1.77
1.77
2.21
1.98
2.10
2.20
2.14
2.48
2.35
2.68
3.18
1.08
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.10
1.35
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
0.54
0.80
1.20
1.20
1.44
1.44
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
1.50
0.47
0.33
0.36
0.27
0.25
0.21
0.18
0.18
0.15
0.12
0.11
0.14
0.12
0.50
0.40
0.32
0.29
0.29
0.25
0.21
0.22
0.19
0.15
0.15
0.13
0.11
2.06
1.48
1.00
1.03
0.83
0.81
0.68
0.70
0.71
0.53
0.49
0.50
0.58
0.40
0.43
0.44
0.37
0.40
0.30
0.34
0.28
0.22
0.31
0.22
0.25
0.18
0.17
0.15
0.12
0.13
0.11
0.09
0.08
0.10
0.09
0.32
0.25
0.20
0.18
0.19
0.16
0.14
0.15
0.13
0.11
0.11
0.09
0.08
1.49
1.09
0.74
0.77
0.61
0.59
0.50
0.52
0.53
0.39
0.37
0.39
0.46
0.30
0.33
0.34
0.28
0.32
0.23
0.27
0.22
0.17
52271E3
52391E3
42391E3
52471E3
42561E3
42681E3
42821E3
32102E3
32122E3
32152E3
32182E3
22182E3
22222E3
53221E3
53271E3
53331E3
53391E3
43391E3
43471E3
43561E3
33681E3
33821E3
33102E3
23122E3
23152E3
23182E3
56689E3
56101E3
56151E3
46151E3
56181E3
46181E3
56221E3
46221E3
36221E3
56271E3
46331E3
36331E3
26331E3
46391E3
36391E3
26391E3
36471E3
26471E3
36561E3
26561E3
26681E3
26821E3
Note
ESR at 100 Hz is approximately 1.05 x ESR 120 Hz
(1)
Revision: 11-Nov-16
Document Number: 28383
3
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
093 PMG-SI
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
120 Hz
(μF)
NOMINAL
CASE SIZE
ØDxL
(mm)
IR
120 Hz
(A)
IL5
(mA)
MAX. ESR (1)
120 Hz
()
MAX. Z
10 kHz
()
ORDERING CODE
MAL2093.......
100
22 x 25
0.89
0.84
1.44
1.05
54101E3
180
22 x 35
1.29
1.50
0.81
0.59
54181E3
180
25 x 30
1.29
1.50
0.78
0.57
44181E3
220
25 x 35
1.47
1.50
0.67
0.50
44221E3
220
30 x 25
1.44
1.50
0.69
0.52
34221E3
270
22 x 50
1.61
1.50
0.54
0.39
54271E3
270
30 x 30
1.67
1.50
0.56
0.41
34271E3
330
25 x 50
1.47
1.50
0.43
0.31
44331E3
330
30 x 35
1.88
1.50
0.46
0.35
34331E3
390
35 x 30
2.05
1.50
0.47
0.37
24391E3
470
35 x 35
2.27
1.50
0.37
0.28
24471E3
560
30 x 50
2.66
1.50
0.31
0.25
34561E3
560
35 x 40
2.57
1.50
0.34
0.27
24561E3
680
35 x 45
2.87
1.50
0.28
0.23
24681E3
82
22 x 25
0.80
0.74
1.77
1.31
57829E3
100
22 x 30
0.95
0.90
1.45
1.07
57101E3
120
22 x 30
1.00
1.08
1.26
0.95
57121E3
120
25 x 25
1.00
1.08
1.29
0.97
47121E3
150
22 x 35
1.17
1.35
1.01
0.76
57151E3
180
22 x 40
1.34
1.50
0.85
0.63
57181E3
180
25 x 30
1.27
1.50
0.86
0.65
47181E3
180
30 x 25
1.32
1.50
0.86
0.65
37181E3
220
22 x 50
1.45
1.50
0.66
0.49
57221E3
220
25 x 35
1.45
1.50
0.73
0.56
47221E3
270
30 x 30
1.64
1.50
0.61
0.47
37271E3
270
35 x 25
1.66
1.50
0.68
0.54
27271E3
330
25 x 50
2.07
1.50
0.46
0.35
47331E3
330
35 x 30
1.98
1.50
0.50
0.39
27331E3
390
30 x 40
2.11
1.50
0.42
0.32
37391E3
390
35 x 35
2.18
1.50
0.43
0.33
27391E3
470
35 x 40
2.47
1.50
0.35
0.27
27471E3
560
35 x 45
2.74
1.50
0.30
0.23
27561E3
680
35 x 50
3.07
1.50
0.25
0.20
27681E3
420
450
Note
(1) ESR at 100 Hz is approximately 1.05 x ESR 120 Hz
ADDITIONAL ELECTRICAL DATA
PARAMETER
CONDITIONS
VALUE
200 V versions
US = 1.1 x UR
1V
-
After 5 min at UR
IL5 0.02 CR x UR or 1.5 mA, whichever is smaller
All case sizes
19 nH typical / 25 nH max.
Voltage
Surge voltage
Reverse voltage
Current
Leakage current
Inductance
Equivalent series inductance (ESL)
Revision: 11-Nov-16
Document Number: 28383
4
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
093 PMG-SI
www.vishay.com
Vishay BCcomponents
Table 3
LOW TEMPERATURE CHARACTERISTIC (at 120 Hz)
UR (V) (1)
DESCRIPTION
200 TO 450
Impedance ratio
Z (-25 °C) / Z (+20 °C)
4
Note
(1) Impedance ratio shall not exceed the given values
RIPPLE CURRENT AND USEFUL LIFE
Table 4
ENDURANCE TEST DURATION AND USEFUL LIFE
ENDURANCE AT 85 °C (h)
USEFUL LIFE AT 85 °C (h)
2000
2000
Note
• Multiplier of useful life code: MGA453
MGA453
2.4
IA
IR
2.3
2.2
2.1
2.0
1.9
1.8
1.7
1
2
1.5
5
2.
3
1.4
4
5
1.3
8
IA = Actual ripple current at 120 Hz
IR = Rated ripple current at 120 Hz and 85 °C
(1)
Useful life at 85 °C and IR applied: 2000 h
10
1.2
15
20
(1)
30
45
60
1.1
1.0
0.8
0.5
0.0
40
Lifetime multiplier
2
1.
5
1.
1.6
50
60
70
80
Tamb (°C)
90
Fig. 4 - Multiplier of useful life as a function of ambient temperature and ripple current load
Table 5
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQUENCY (Hz)
60
100
120
500
1000
10 000
1.20
1.30
1.40
IR MULTIPLIER
0.90
Revision: 11-Nov-16
0.95
1.00
Document Number: 28383
5
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
093 PMG-SI
www.vishay.com
Vishay BCcomponents
Table 6
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST
Endurance
REFERENCE
IEC 60384-4 /
EN130300
subclause 4.13
PROCEDURE
(quick reference)
REQUIREMENTS
C/C: ± 10 %
Tamb = 85 °C; UR applied;
2000 h
ESR 2 x spec. limit
IL5 spec. limit
C/C: ± 30 %
ESR 3 x spec. limit
Useful life
CECC 30301
subclause 1.8.1
Tamb = 85 °C; UR and IR applied:
2000 h
IL5 spec. limit
no short or open circuit,
no visible damage
total failure percentage: 3 %
Shelf life
(storage at
high temperature)
IEC 60384-4 /
EN130 300
subclause 4.17
Tamb = 85 °C; no voltage applied;
500 h
C/C: ± 20 %
After test: UR to be applied for 30 min,
24 h to 48 h before measurement
IL5 1 x spec. limit
ESR 2 x spec. limit
Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the
lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.
Revision: 11-Nov-16
Document Number: 28383
6
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
