110 PHT-ST
www.vishay.com
Vishay BCcomponents
Aluminum Electrolytic Capacitors,
Power High Ripple for Traction, Screw Terminals
FEATURES
• Long useful life: > 10 000 h at +85 °C
• Available in case sizes up to Ø 90 mm x 220 mm
• Low ESR
• Polarized aluminum electrolytic capacitors,
non-solid electrolyte
• Large types, cylindrical aluminum case, insulated with a
blue sleeve
• Pressure relief in the sealing
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
LINKS TO ADDITIONAL RESOURCES
3D 3D
APPLICATIONS
3D Models
• Traction (metro / subway, light rail, streetcars / tram)
• Heavy duty applications
QUICK REFERENCE DATA
DESCRIPTION
• Various industrial applications
VALUE
76 x 146 to 76 x 220 (1)
Nominal case size (Ø D x L in mm)
Rated capacitance range
(E6 series), CR
The capacitors are marked with the following information:
6000 μF (1)
Tolerance on CR
-10 % / +30 %
Rated voltage range, UR
250 V to 450 V (1)
Category temperature range
-40 °C to +85 °C
Endurance test at 85 °C
MARKING
• Rated capacitance (in μF)
• Tolerance on rated capacitance, code letter in accordance
with IEC 60062 (Q for -10 % / +30 %)
• Rated voltage (in V)
2000 h
Useful life at 85 °C
> 10 000 h
• Date code
Useful life at 70 °C
> 40 000 h
• Name of manufacturer
Useful life at 40 °C,
1.4 x IR applied
> 400 000 h
• Code for factory of origin
Shelf life at 0 V, 85 °C
500 h
Based on sectional specification
IEC 60384-4 / EN 130300
Climatic category IEC 60068
40 / 085 / 056
• “-” sign to identify the negative terminal, visible from the
top and side of the capacitor
• Code number
• Climatic category in accordance with IEC 60068
Note
(1) Other values available on request
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
UR (V)
CR
(μF)
250
300
350
400
450
6000
76 x 146
76 x 220
76 x 220
76 x 220
76 x 220
Note
• Other values available on request
Revision: 03-Jun-2022
Document Number: 28411
1
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
110 PHT-ST
www.vishay.com
Vishay BCcomponents
DIMENSIONS in millimeters AND AVAILABLE FORMS
Safety
vent
Lt
Thread M x S
Lt
L
Mb
L
d1
lb
d1
P
D
D
B
B
H
H
T
T
Clamp mounting (ST)
Threaded stud mounting (STB)
Fig. 1A - High current M5 and M6-13 mm disc: Screw Terminal (ST) and Screw Terminal Bolt nut (STB)
For details refer to Table 1
Safety
vent
Thread M x S
Lt
Lt
L
L
Mb
lb
D
D
P
d1
d1
T
T
Clamp mounting (ST)
Threaded stud mounting (STB)
Fig. 1B - High current M6-18 mm disc and 1/4-28 UNF disc: Screw Terminal (ST) and Screw Terminal Bolt nut (STB)
For details refer to Table 1
Note
• Maximum permissible torque which may be applied to the termination screws: 2 Nm for M5; 2.5 Nm for M6 and 1/4-28 UNF.
For accessories refer to document “Mounting Accessories”, see www.vishay.com/doc?28348
The capacitors are delivered with screws and washers
Table 1
DIMENSIONS in millimeters, MASS, AND PACKAGING QUANTITIES
DESIGN
DRAWING L ± 1 Lt ± 1 D ± 1 P ± 0.3 T ± 0.2 H ± 0.3 B ± 0.3 d1 ± 0.1
M
S ± 1 Mb Ib ± 0.1
MASS
(g)
76 x 146 M5-13 mm
1A
145.8 150.2 76.4
31.8
5.5
3.5
18.3
13.0
M5
9.5 M12
16
76 x 146 M6-13 mm
1A
145.8 150.2 76.4
31.8
5.5
3.5
18.3
13.0
M6
9.5 M12
16
1000
76 x 146 M6-18 mm
1B
145.8 153.0 76.4
31.8
8.3
n/a
n/a
17.3
M6
10.0 M12
16
1000
76 x 146 1/4-28 UNF
1B
145.8 153.0 76.4
31.8
8.3
n/a
n/a
17.3
1/4-28 UNF 10.0 M12
16
1000
76 x 220 M5-13 mm
1A
219.8 224.2 76.4
31.8
5.5
3.5
18.3
13.0
16
1500
76 x 220 M6-13 mm
1A
219.8 224.2 76.4
31.8
5.5
3.5
18.3
13.0
M6
9.5 M12
16
1500
76 x 220 M6-18 mm
1B
219.8 227.0 76.4
31.8
8.3
n/a
n/a
17.3
M6
10.0 M12
16
1500
76 x 220 1/4-28 UNF
1B
219.8 227.0 76.4
31.8
8.3
n/a
n/a
17.3
1/4-28 UNF 10.0 M12
16
1500
M5
9.5 M12
1000
DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
DESIGN
PACKAGING QUANTITIES
(units per box)
CARDBOX DIMENSIONS
LxWxH
(mm)
76 x 146
12
377 x 375 x 168
76 x 220
12
377 x 375 x 242
Note
• For STB version holds:
H cardbox box: +10 mm
Revision: 03-Jun-2022
Document Number: 28411
2
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
110 PHT-ST
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA
SYMBOL
CR
IR
IL5
ESR
Z
DESCRIPTION
Rated capacitance at 100 Hz, tolerance -10 % / +30 %
Rated RMS ripple current at 100 Hz, 85 °C
Max. leakage current after 5 min at UR
Max. equivalent series resistance at 100 Hz
Max. impedance at 20 kHz
Note
• Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %
Table 2
ELECTRICAL DATA AND ORDERING INFORMATION
CASE SIZE
ØDxL
(mm)
CR
100 Hz
(μF)
UR
(V)
IR
100 Hz
85 °C
(A)
IL
5 min
(mA)
ESR
(mΩ)
MAX.
Z
(mΩ)
TYP.
MAX.
ORDERING CODE (1)
TYP.
250
6000
76 x 146
18.35
3.0
17.6
9.7
11.5
6.9
300
6000
76 x 220
18.35
3.6
25.3
13.9
20.0
12.0
350
6000
76 x 220
18.49
4.2
24.0
13.2
18.6
11.2
400
6000
76 x 220
18.45
4.8
23.8
13.1
18.6
11.2
450
6000
76 x 220
19.76
5.4
19.1
10.5
13.6
8.2
ST
STB
MAL211013602E3
MAL211033602E3
MAL211053602E3
MAL211073602E3
MAL211010602E3
MAL211030602E3
MAL211050602E3
MAL211070602E3
MAL211015602E3
MAL211035602E3
MAL211055602E3
MAL211075602E3
MAL211016602E3
MAL211036602E3
MAL211056602E3
MAL211076602E3
MAL211017602E3
MAL211037602E3
MAL211057602E3
MAL211077602E3
MAL211023602E3
MAL211043602E3
MAL211063602E3
MAL211083602E3
MAL211020602E3
MAL211040602E3
MAL211060602E3
MAL211080602E3
MAL211025602E3
MAL211045602E3
MAL211065602E3
MAL211085602E3
MAL211026602E3
MAL211046602E3
MAL211066602E3
MAL211086602E3
MAL211027602E3
MAL211047602E3
MAL211067602E3
MAL211087602E3
Note
(1) Underlined 8th digit determines form: for details see “Part Number Explanation” table
PART NUMBER EXPLANATION (Example: 350 V, 6000 μF, M6-13 mm disc)
1234
567
8
9
10 11 12
13 14
E3
MAL2
110
3
5
602
PREFIX
SERIES NAME
FORM
VOLTAGE
CAPACITANCE
1 = high current M5-13 mm disc (ST)
2 = high current M5-13 mm disc,
with mounting bolt (STB)
3 = high current M6-13 mm disc (ST)
4 = high current M6-13 mm disc,
with mounting bolt (STB)
5 = high current M6-18 mm disc (ST)
6 = high current M6-18 mm disc,
with mounting bolt (STB)
7 = US tread 1/4-28 UNF (ST)
8 = US tread 1/4-28 UNF,
with mounting bolt (STB)
3 = 250 V
0 = 300 V
5 = 350 V
6 = 400 V
7 = 450 V
602 = 6000 μF
Lead (Pb)-free
(RoHS-compliant)
Note
• Other values or designs are available on request.
For more information, please visit the “Product Coding” page: www.vishay.com/doc?28394
Revision: 03-Jun-2022
Document Number: 28411
3
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
110 PHT-ST
www.vishay.com
Vishay BCcomponents
ADDITIONAL ELECTRICAL DATA
PARAMETER
CONDITIONS
VALUE
Voltage
US = 1.1 x UR
Surge voltage
Urev ≤ 1 V
Reverse voltage
Current
Leakage current
After 1 min at UR
IL1 ≤ 0.006 CR x UR
After 5 min at UR
IL5 ≤ 0.002 CR x UR
Inductance
Typ. 20 nH (1)
Equivalent series inductance (ESL)
Note
(1) Low ESL designs available on request
RIPPLE CURRENT AND USEFUL LIFE
1.5
1.4
1.3
IR Forced
IR Free
1.2
1.1
1
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
Air Velocity (m/s)
Fig. 2 - Multiplier of ripple current (IR) as a function of air flow
MAXIMUM RIPPLE CURRENT
PARAMETER
Ambient temperature (Tamb)
Operating frequency (f)
Air flow
CONDITION
MAXIMUM RIPPLE CURRENT MULTIPLIER
VALUE
70 °C
From nomogram; see Fig. 3
1.6
400 Hz
From frequency; see Table 3
1.3
2 m/s
From air flow; see Fig. 2
1.25
Note
• Calculation example for 110 series. maximum ripple current multiplier = 1.6 x 1.3 x 1.25 = 2.6
Revision: 03-Jun-2022
Document Number: 28411
4
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
110 PHT-ST
www.vishay.com
Vishay BCcomponents
Table 3
ENDURANCE TEST DURATION AND USEFUL LIFE
ENDURANCE
AT 85 °C
(h)
USEFUL LIFE
AT 85 °C
(h)
2000
> 10 000
Note
• Multiplier of useful life code: CCC205-05
CCC205-05
2.6
IA
IR
2.4
2.2
2.0
1.8
1.6
1.4
lifetime multiplier
1.2
(1)
0.8
1.0
1.5
2.0
3.0
4.0
6.0
10
20
Useful life at 85 °C and IR applied: 10 000 h
30
(1)
1.0
40
IA = Actual ripple current at 100 Hz
IR = Rated ripple current at 100 Hz and 85 °C
0.5
0.0
40
50
60
70
80
90
Tamb (°C)
100
Fig. 3 - Multiplier of useful life as a function of ambient temperature and ripple current load
Table 4
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQUENCY (Hz)
50
100
200
400
1000
10 000
1.30
1.40
1.50
IR MULTIPLIER
0.90
Revision: 03-Jun-2022
1.00
1.20
Document Number: 28411
5
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
110 PHT-ST
www.vishay.com
Vishay BCcomponents
Table 5
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST
Endurance
Useful life
REFERENCE
IEC 60384-4 /
EN 130300
subclause 4.13
CECC 30301
subclause 1.8.1
PROCEDURE
(quick reference)
Tamb = 85 °C; UR applied;
2000 h
Tamb = 85 °C; UR and IR applied
REQUIREMENTS
ΔC/C: ± 10 %
tan δ ≤ 1.3 x spec. limit
Z ≤ 2 x spec. limit
IL5 ≤ spec. limit
ΔC/C: ± 30 %
tan δ ≤ 3 x spec. limit
Z ≤ 3 x spec. limit
IL5 ≤ spec. limit
no short or open circuit,
no visible damage
Total failure percentage:
≤3%
Shelf life
(storage at
high temperature)
IEC 60384-4 /
EN 130300
subclause 4.17
Tamb = 85 °C; no voltage applied;
500 h
after test: UR to be applied for 30 min,
24 h to 48 h before measurement
ΔC/C: ± 10 %
tan δ ≤ 1.2 x spec. limit
IL5 ≤ 2 x spec. limit
Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the
lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.
Revision: 03-Jun-2022
Document Number: 28411
6
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2023
1
Document Number: 91000
