Not for New Designs - Alternative Device: 041-043ASH or 138 AML
132/133 ALL-DIN
www.vishay.com
Vishay BCcomponents
Aluminum Capacitors
Axial Long-Life, DIN-Based
FEATURES
• Long useful life: up to 15 000 h at 85 °C
• Taped versions up to case Ø 15 mm x 30 mm
available for automatic insertion
• Charge and discharge proof
• Polarized aluminum electrolytic capacitors, non-solid
electrolyte
• Axial leads, cylindrical aluminum case, insulated with a
blue sleeve
• Mounting ring version not available in insulated form
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
042/043 ASH
high
voltage
138 AML
021 ASM
smaller
dimensions
132/133 ALL-DIN
longer
life
APPLICATIONS
119 AHT
120 ATC
• General industrial, power supplies, telecommunication,
EDP
• Coupling, decoupling, timing; smoothing, filtering and
buffering in SMPS
• For use where low mounting height is important
• Vibration and shock resistant
Fig. 1
QUICK REFERENCE DATA
DESCRIPTION
VALUE
6.5 x 18
10 x 18
10 x 30
and
and
to
8 x 18
10 x 25
21 x 38
1 μF to 4700 μF
-10 % to +50 %
10 V to 160 V
-40 °C to +85 °C
2000 h
2000 h
6000 h
8000 h
8000 h
3000 h
3000 h
10 000 h 15 000 h 15 000 h
Nominal case sizes
(Ø D x L in mm)
MARKING
Rated capacitance range, CR
Tolerance on CR
Rated voltage range, UR
Category temperature range
Endurance test at 105 °C
Endurance test at 85 °C
Useful life at 105 °C
Useful life at 85 °C
Useful life at 40 °C,
160 000 h 240 000 h 240 000 h
1.8 x IR applied
Shelf life at 0 V, 85 °C
500 h
Based on sectional
IEC 60384-4/EN130 300
specification
Climatic category
40/085/56
IEC 60068
The capacitors are marked (where possible) with the
following information:
• Rated capacitance (in μF)
• Tolerance on rated capacitance, code letter in accordance
with IEC 60062 (T for -10 % to +50 %)
• Rated voltage (in V)
• Upper category temperature (85 °C)
• Date code, in accordance with IEC 60062
• Code for factory of origin
• Name of manufacturer
• Negative terminal identification
• Series number (132 or 133)
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(μF)
1.0
2.2
4.7
10
22
UR (V)
10
16
25
40
63
100
160
250
-
-
6.5 x 18
-
-
6.5 x 18
6.5 x 18
8 x 18
-
6.5 x 18
6.5 x 18
-
10 x 25
10 x 30 (1)
10 x 30 (1)
12.5 x 30 (1)
-
Note
For these CV-values see datasheet 041 - 043 ASH (www.vishay.com/doc?28329)
(1)
Revision: 09-Jan-17
Document Number: 28366
1
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Designs - Alternative Device: 041-043ASH or 138 AML
132/133 ALL-DIN
www.vishay.com
Vishay BCcomponents
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(μF)
47
68
100
150
220
330
470
680
1000
1500
2200
3300
4700
UR (V)
10
12.5 x 30
12.5 x 30
15 x 30
18 x 30
18 x 30
18 x 38
21 x 38
16
6.5 x 18
8 x 18
10 x 18
10 x 25
12.5 x 30
10 x 25
12.5 x 30
15 x 30
15 x 30
18 x 30
18 x 38
21 x 38
21 x 38
25
10 x 25
12.5 x 30
12.5 x 30
12.5 x 30
18 x 30
18 x 30
18 x 38
21 x 38
-
40
8 x 18
10 x 18
12.5 x 30
12.5 x 30
15 x 30
15 x 30
18 x 30
18 x 38
21 x 38
21 x 38
-
63
10 x 18
10 x 30
10 x 30
15 x 30
15 x 30
18 x 30
18 x 38
21 x 38
21 x 38
-
100
10 x 25
10 x 30
12.5 x 30
15 x 30
18 x 30
18 x 38
18 x 38
21 x 38
-
160
15 x 30 (1)
15 x 30 (1)
18 x 30 (1)
18 x 38 (1)
21 x 38 (1)
-
250
18 x 30 (1)
18 x 38 (1)
21 x 38 (1)
-
Note
(1) For these CV-values see datasheet 041 - 043 ASH (www.vishay.com/doc?28329)
DIMENSIONS in millimeters AND AVAILABLE FORMS
73 ± 1.6
ØD
L
L
I
Ød
33 ± 1
Ød
ØD
F
F
Form BR: Taped on reel
Case Ø D x L = 6.5 mm x 18 mm to 15 mm x 30 mm
Form AA: Axial in box
Case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm
Form BA: Taped in box (ammopack)
Case Ø D x L = 6.5 mm x 18 mm to 10 mm x 25 mm
Fig. 2 - Forms BA and BR
Fig. 3 - Form AA
Table 1
AXIAL; DIMENSIONS in millimeters, MASS, AND PACKAGING QUANTITIES
NOMINAL
CASE SIZE
ØDxL
6.5 x 18
8 x 18
10 x 18
10 x 25
10 x 30
12.5 x 30
15 x 30
18 x 30
18 x 38
21 x 38
AXIAL FORM AA, BA, AND BR
CASE
CODE
Ød
I
Ø Dmax.
Lmax.
Fmin.
MASS
(g)
4
5
6
7
00
01
02
03
04
05
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
55 ± 1
55 ± 1
55 ± 1
55 ± 1
34 ± 1
34 ± 1
6.9
8.5
10.5
10.5
10.5
13.0
15.5
18.5
18.5
21.5
18.5
18.5
18.5
25.5
30.5
30.5
30.5
30.5
39.5
39.5
25
25
25
30
35
35
35
35
44
44
1.3
1.7
2.5
3.3
4.8
7.4
11.7
12.9
19.0
24.0
PACKAGING QUANTITIES
FORM
FORM
FORM
AA
BA
BR
1000
1000
500
500
500
500
500
500
340
500
260
400
200
250
120
125
100
-
Note
• For detailed tape dimensions, please see www.vishay.com/doc?28361.
Revision: 09-Jan-17
Document Number: 28366
2
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Designs - Alternative Device: 041-043ASH or 138 AML
132/133 ALL-DIN
www.vishay.com
Vishay BCcomponents
D
120 °C
(3 x)
3.6 + 0.2
- 0.2
D3
90° ± 2°
(3 x)
-
L
1.05 + 0.03 (3 x)
- 0.1
1.3 + 0 (3 x)
- 0.05
d2
1.3 + 0.1 (3 x)
0
Mounting holes
+ 1.0
- 0.5
Ø d1
Ø D2
Case Ø D x L = 15 mm x 30 mm to 21 mm x 38 mm
Case not insulated (insulation on request)
Especially for applications with severe shocks and vibrations
Fig. 4 - Mounting hole diagram and outline; form MR: with mounting rings and pins
Table 2
MOUNTING RING; DIMENSIONS in millimeters, MASS, AND PACKAGING QUANTITIES
NOMINAL
CASE SIZE
ØDxL
CASE
CODE
MOUNTING RING: FORM MR
ø d1
Ø d2
Ø Dmax.
Ø D2max.
D3
Lmax.
15 x 30
02
0.8
1.0 + 0.4
15.5
17.5
16.5 ± 0.2
18 x 30
03
0.8
1.0 + 0.4
18.5
19.5
18 x 38
04
0.8
1.0 + 0.4
18.5
21 x 38
05
0.8
1.0 + 0.4
21.5
PACKAGING
QUANTITIES
33
11.7
200
18.5 ± 0.2
33
12.9
240
19.5
18.5 ± 0.2
42
19.0
100
22.5
21.5 ± 0.2
42
24.0
100
ORDERING EXAMPLE
ELECTRICAL DATA
SYMBOL
MASS
(g)
DESCRIPTION
Electrolytic capacitor 132 series
100 μF/40 V; -10 %/+50 %
CR
Rated capacitance at 100 Hz,
tolerance -10 %/+50 %
Nominal case size: Ø 10 mm x 18 mm; form BR
IR
Rated RMS ripple current at 100 Hz, 85 °C
Ordering code: MAL213227101E3
Former 12NC: 2222 132 27101
IL5
Max. leakage current after 5 min at UR
tan
Max. dissipation factor at 100 Hz
ESR
Equivalent series resistance at 100 Hz (calculated
from tan max. and CR)
Z
Max. impedance at 10 kHz
Note
• Unless otherwise specified, all electrical values in Table 3 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %.
Revision: 09-Jan-17
Document Number: 28366
3
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Designs - Alternative Device: 041-043ASH or 138 AML
132/133 ALL-DIN
www.vishay.com
Vishay BCcomponents
Table 3
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
10
16
25
40
63
IR
NOMINAL
IL5
ESR
Z
Z
CR
CASE SIZE 100 Hz
tan
100 Hz
5 min
100 Hz 10 kHz 100 kHz
85 °C
ØDxL
100 Hz
(μF)
(μA)
()
()
()
(mA)
(mm)
470
680
1000
1500
2200
3300
4700
47
100
220
330
330
470
470
680
1000
1500
2200
3300
4700
22
220
220
330
470
680
1000
1500
2200
47
100
150
150
220
330
470
680
1000
1500
2200
4.7
10
22
47
68
68
100
150
220
330
470
680
1000
12.5 x 30
12.5 x 30
15 x 30
18 x 30
18 x 30
18 x 38
21 x 38
6.5 x 18
8 x 18
10 x 18
10 x 25
12.5 x 30
10 x 25
12.5 x 30
15 x 30
15 x 30
18 x 30
18 x 38
21 x 38
21 x 38
6.5 x 18
10 x 25
12.5 x 30
12.5 x 30
12.5 x 30
18 x 30
18 x 30
18 x 38
21 x 38
8 x 18
10 x 18
10 x 25
12.5 x 30
12.5 x 30
15 x 30
15 x 30
18 x 30
18 x 38
21 x 38
21 x 38
6.5 x 18
6.5 x 18
8 x 18
10 x 18
10 x 25
10 x 30
10 x 30
15 x 30
15 x 30
18 x 30
18 x 38
21 x 38
21 x 38
Revision: 09-Jan-17
350
460
640
800
1100
1300
1800
95
150
250
320
320
450
450
550
780
950
1300
1600
2300
60
340
340
410
560
700
1000
1100
1850
120
210
310
310
410
550
700
900
1200
1500
1900
38
64
100
170
210
210
300
350
520
600
970
1000
1600
9.4
13.6
20
30
44
66
94
5.5
7.2
11
14.6
10.6
19
15
22
32
48
70
110
150
5.1
15
11
16.5
24
34
50
75
110
7.8
12
16
12
17.5
26
38
54
80
120
180
4.6
5.3
6.8
9.9
12.6
8.6
12.6
19
28
42
59
86
130
0.18
0.18
0.18
0.22
0.22
0.27
0.27
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.14
0.15
0.15
0.15
0.15
0.11
0.11
0.11
0.11
0.11
0.11
0.11
0.12
0.13
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.09
0.10
0.10
0.07
0.07
0.07
0.07
0.07
0.07
0.07
0.07
0.07
0.07
0.07
0.07
0.07
0.61
0.42
0.28
0.23
0.16
0.13
0.09
4.7
2.2
1.0
0.67
0.67
0.47
0.47
0.33
0.22
0.16
0.11
0.07
0.05
8.0
0.80
0.80
0.53
0.37
0.26
0.17
0.13
0.09
3.0
1.4
0.95
0.95
0.65
0.43
0.30
0.21
0.14
0.10
0.07
24
11
5.1
2.4
1.6
1.6
1.1
0.74
0.50
0.34
0.24
0.16
0.11
0.26
0.20
0.12
0.10
0.09
0.05
0.05
2.6
1.2
0.55
0.36
0.36
0.26
0.26
0.14
0.12
0.10
0.06
0.05
0.05
4.1
0.40
0.40
0.30
0.20
0.10
0.10
0.06
0.05
1.6
0.75
0.50
0.50
0.34
0.20
0.16
0.10
0.08
0.06
0.05
12
5.5
2.5
1.2
0.81
0.80
0.60
0.37
0.25
0.15
0.12
0.08
0.06
0.60
0.40
2.2
1.1
0.55
0.36
0.60
0.26
0.40
2.9
0.40
0.60
0.40
1.4
0.75
0.50
0.60
0.40
5.0
3.3
2.1
1.2
0.60
0.60
0.40
-
ORDERING CODE MAL2.......
IN BOX
FORM AA
13214471E3
13214681E3
13214102E3
13214152E3
13214222E3
13214332E3
13214472E3
13215331E3
13215471E3
13215681E3
13215102E3
13215152E3
13215222E3
13215332E3
13215472E3
13216221E3
13216331E3
13216471E3
13216681E3
13216102E3
13216152E3
13216222E3
13217151E3
13217221E3
13217331E3
13217471E3
13217681E3
13217102E3
13217152E3
13217222E3
13218689E3
13218101E3
13218151E3
13218221E3
13218331E3
13218471E3
13218681E3
13218102E3
TAPED
ON REEL
FORM BR
13224471E3
13224681E3
13224102E3
13225479E3
13225101E3
13225221E3
13290508E3
13225331E3
13290507E3
13225471E3
13225681E3
13225102E3
13226229E3
13290503E3
13226221E3
13226331E3
13226471E3
13227479E3
13227101E3
13290511E3
13227151E3
13227221E3
13227331E3
13227471E3
13228478E3
13228109E3
13228229E3
13228479E3
13290513E3
13228689E3
13228101E3
13228151E3
13228221E3
-
TAPED
IN BOX
FORM BA
13235479E3
13235101E3
13235221E3
13290509E3
13290502E3
13236229E3
13290504E3
13237479E3
13237101E3
13290512E3
13238478E3
13238109E3
13238229E3
13238479E3
13290514E3
-
MOUNTING
RING
FORM MR
13244102E3
13244152E3
13244222E3
13244332E3
13244472E3
13245681E3
13245102E3
13245152E3
13245222E3
13245332E3
13245472E3
13246681E3
13246102E3
13246152E3
13246222E3
13247331E3
13247471E3
13247681E3
13247102E3
13247152E3
13247222E3
13248151E3
13248221E3
13248331E3
13248471E3
13248681E3
13248102E3
Document Number: 28366
4
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Designs - Alternative Device: 041-043ASH or 138 AML
132/133 ALL-DIN
www.vishay.com
Vishay BCcomponents
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
100
160
IR
NOMINAL
IL5
ESR
Z
Z
CR
CASE SIZE 100 Hz
tan
100 Hz
5 min
100 Hz 10 kHz 100 kHz
85 °C
ØDxL
100 Hz
(μF)
(μA)
()
()
()
(mA)
(mm)
1.0
4.7
47
47
68
100
150
220
330
470
22
6.5 x 18
6.5 x 18
10 x 25
10 x 30
12.5 x 30
15 x 30
18 x 30
18 x 38
18 x 38
21 x 38
10 x 25
20
48
220
220
250
380
400
660
700
1200
120
4.0
4.9
13.4
9.4
13.5
20
30
44
66
94
20
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.06
0.10
95
20
2.0
2.0
1.4
0.95
0.64
0.43
0.29
0.20
7.2
45
9.6
1.0
1.0
0.80
0.50
0.35
0.20
0.15
0.10
5.5
6.0
4.0
0.90
0.90
2.5
ORDERING CODE MAL2.......
IN BOX
FORM AA
TAPED
ON REEL
FORM BR
TAPED
IN BOX
FORM BA
MOUNTING
RING
FORM MR
13219479E3
13219689E3
13219101E3
13219151E3
13219221E3
13219331E3
13219471E3
-
13229108E3
13229478E3
13290505E3
13229479E3
13229689E3
13229101E3
13390502E3
13239108E3
13239478E3
13290506E3
13390503E3
13249101E3
13249151E3
13249221E3
13249331E3
13249471E3
-
ADDITIONAL ELECTRICAL DATA
PARAMETER
Voltage
Surge voltage
Reverse voltage
Current
Leakage current
CONDITIONS
UR = 10 V to 160 V
VALUE
AXIAL
MOUNTING RING
Us 1.15 x UR
Urev 1 V
After 1 min:
case Ø D x L = 6.5 mm x 18 mm to 10 mm x 25 mm:
UR = 10 V to 100 V
UR = 160 V
case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm:
UR = 10 V to 100 V
After 5 min:
case Ø D x L = 6.5 mm x 18 mm to 10 mm x 25 mm:
UR = 10 V to 100 V
UR = 160 V
case Ø D x L = 10 mm x 30 mm to 21 mm x 38 mm:
UR = 10 V to 100 V
IL1 0.01 CR x UR + 3 μA
IL1 50 μA
IL1 0.006 CR x UR + 3 μA
IL5 0.002 CR x UR + 4 μA
IL5 20 μA
IL5 0.002 CR x UR + 4 μA
Inductance
Equivalent series
inductance (ESL)
Revision: 09-Jan-17
Case Ø D x L mm:
6.5 x 18
8 x 18
10 x 18
10 x 25
10 x 30
12.5 x 30
15 x 30
18 x 30
18 x 38
21 x 38
Typ. 15 nH
Typ. 35 nH
Typ. 69 nH
Typ. 38 nH
Typ. 38 nH
Typ. 46 nH
Typ. 48 nH
Typ. 50 nH
Typ. 54 nH
Typ. 59 nH
Typ. 39 nH
Typ. 39 nH
Typ. 39 nH
Typ. 39 nH
Document Number: 28366
5
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Designs - Alternative Device: 041-043ASH or 138 AML
132/133 ALL-DIN
www.vishay.com
Vishay BCcomponents
CAPACITANCE (C)
1.10
C
C0
1.05
1
1.05
C
C0
1.00
3
2
0.95
2
0.90
3
1.00
0.95
2
0.85
3
Curve 1: 10 V
Curve 2: 63 V
Curve 3: ≥ 100 V
0.90
1
1
Curve 1: 10 V
Curve 2: 63 V
Curve 3: ≥ 100 V
0.80
0.85
0.75
0
- 40
C0 = Capacitance at 20 °C, 100 Hz
80
40
Tamb (°C)
10
102
C0 = Capacitance at 20 °C, 100 Hz
Fig. 5 - Typical multiplier of capacitance
as a function of ambient temperature at 10 kHz
103
104
f (Hz)
Fig. 6 - Typical multiplier of capacitance
as a function of frequency
DISSIPATION FACTOR (tan )
10
10
Curve 1: 16 V
Curve 2: 100 V
tan δ
1
Curve 1: 16 V
Curve 2: 100 V
tan δ
1
1
2
10-1
10 -1
1
2
10-2
10 -2
- 60
- 40
- 20
0
20
40
60
80
100
Tamb (°C)
f = 100 Hz
Case Ø D x L = 6.5 mm x 18 mm to 10 mm x 25 mm
10 2
10
103
f (Hz)
104
Case Ø D x L = 6.5 mm x 18 mm to 10 mm x 25 mm
Fig. 7 - Typical tan as a function of ambient temperature
Fig. 8 - Typical tan as a function of frequency
IMPEDANCE (Z)
10 3
102
Z
(Ω)
Z
(Ω)
Curve 1: 47 µF, 100 V
Curve 2: 47 µF, 16 V
Curve 3: 150 µF, 16 V
Curve 4: 220 µF, 16 V
Curve 5: 470 µF, 16 V
1
10 2
10
1
2
10
1
3
2
3
4
Curve 1: 47 µF, 100 V
Curve 2: 47 µF, 16 V
Curve 3: 150 µF, 16 V
Curve 4: 220 µF, 16 V
Curve 5: 470 µF, 16 V
10-1
- 40
- 20
0
10-1
20
40
Case Ø D x L = 6.5 mm x 18 mm to 10 mm x 25 mm
60
80
100
Tamb (°C)
f = 10 Hz
Fig. 9 - Typical impedance as a function of ambient temperature
Revision: 09-Jan-17
5
5
10-2
- 60
4
1
10 2
103
104
Case Ø D x L = 6.5 mm x 18 mm to 10 mm x 25 mm
105
f (Hz)
10 6
Tamb (°C)
Fig. 10 - Typical impedance as a function of frequency
Document Number: 28366
6
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Designs - Alternative Device: 041-043ASH or 138 AML
132/133 ALL-DIN
www.vishay.com
Vishay BCcomponents
RIPPLE CURRENT AND USEFUL LIFE
Table 4
ENDURANCE TEST DURATION AND USEFUL LIFE
NOMINAL CASE SIZE
ØDxL
(mm)
ENDURANCE
AT 85 °C
(h)
USEFUL LIFE
AT 85 °C
(h)
6.5 x 18
6000
10 000
8 x 18
6000
10 000
10 x 18
6000
10 000
10 x 25
6000
10 000
10 x 30
8000
15 000
12.5 x 30
8000
15 000
15 x 30
8000
15 000
18 x 30
8000
15 000
18 x 38
8000
15 000
21 x 38
8000
15 000
Note
• Multiplier of useful life code: CCC205
CCC205
3.3
IA
3.2
IR
3.1
3.0
2.8
2.6
2.4
Lifetime multiplier
2.2
0
1.
5
1.
2.0
0
2.
0
3.
1.8
0
4.
6
1.6
.0
15
70
0.5
0.0
(1)
30
1.0
0.8
Useful life at 85 °C and IR applied:
Case Ø D x L = 6.5 mm x 18 mm to 8 mm x 18 mm:
10 000 h
Case Ø D x L = 10 mm x 18 mm to 21 mm x 38 mm:
15 000 h
20
(1)
50
1.2
10
1.4
IA = Actual ripple current at 100 Hz
IR = Rated ripple current at 100 Hz, 85 °C
40
50
60
70
80
90
100
T amb (° C)
Fig. 11 - Multiplier of useful life as a function of ambient temperature and ripple current load
Revision: 09-Jan-17
Document Number: 28366
7
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Not for New Designs - Alternative Device: 041-043ASH or 138 AML
132/133 ALL-DIN
www.vishay.com
Vishay BCcomponents
Table 5
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQUENCY (Hz)
UR
(V)
50
100
300
1000
3000
10 000
IR MULTIPLIER
10
0.95
1.00
1.07
1.12
1.15
1.20
16
0.95
1.00
1.07
1.12
1.15
1.20
25
0.90
1.00
1.12
1.20
1.25
1.30
40
0.90
1.00
1.12
1.20
1.25
1.30
63
0.90
1.00
1.12
1.20
1.25
1.30
100
0.85
1.00
1.20
1.30
1.35
1.40
160
0.85
1.00
1.20
1.30
1.35
1.40
250
0.85
1.00
1.20
1.30
1.35
1.40
Table 6
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST
Endurance
Useful life
Shelf life
(storage at high
temperature)
Revision: 09-Jan-17
REFERENCE
PROCEDURE
(quick reference)
IEC 60384-4/
EN 130300
subclause 4.13
Tamb = 85 °C; UR applied;
Case Ø D x L = 6.5 mm x 18 mm to 8 mm x 18 mm:
6000 h;
Case Ø D x L = 10 mm x 18 mm to 2 1 mm x 38 mm:
8000 h
CECC 30301
subclause 1.8.1
Tamb = 85 °C; UR and IR applied;
Case Ø D x L = 6.5 mm x 18 mm to 8 mm x 18 mm:
10 000 h;
Case Ø D x L = 10 mm x 18 mm to 21 mm x 38 mm:
15 000 h
IEC 60384-4/
EN 130300
subclause 4.17
Tamb = 85 °C; no voltage applied;
500 h;
After test: UR to be applied for 30 min,
24 h to 48 h before measurement
REQUIREMENTS
UR = 10 V to 160 V; C/C: ± 15 %
tan 1.3 x spec. limit
Z 2 x spec. limit
IL5 spec. limit
UR = 10 V to 160 V; C/C: ± 45 %
tan 3 x spec. limit
Z 3 x spec. limit
IL5 spec. limit
no short or open circuit
total failure percentage: 1 %
C/C, tan , Z:
for requirements
see “Endurance test” above
IL5 2 x spec. limit
Document Number: 28366
8
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
