140 RTM
www.vishay.com
Vishay BCcomponents
Aluminum Electrolytic Capacitors
Radial, High Temperature Miniature
FEATURES
•
•
•
•
•
•
Very long useful life: 2500 h to 4000 h at 125 °C
High stability, high reliability
AEC-Q200 qualified
Extended temperature range up to 125 °C
High ripple current capability
Polarized aluminum electrolytic capacitors,
non-solid electrolyte
• Radial leads, cylindrical aluminum case with pressure
relief, insulated with a blue sleeve
• Charge and discharge proof
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
140 RTM
125 °C
105 °C
148 RUS
longer life
lower Z
APPLICATIONS
150 RMI
• EDP, telecommunication, industrial, automotive and
military
• Smoothing, filtering, buffering in SMPS
• High ambient temperature environments
Fig. 1
QUICK REFERENCE DATA
DESCRIPTION
Nominal case sizes (Ø D x L in mm)
Rated capacitance range, CR
Tolerance on CR
Rated voltage range, UR
Category temperature range
Endurance test at 125 °C
Useful life at 125 °C
Useful life at 40 °C, 1.6 x IR applied
Shelf life at 0 V, 125 °C
Based on sectional specification
Climatic category IEC 60068
VALUE
10 x 12 to 18 x 31
22 μF to 4700 μF
± 20 %
6.3 V to 63 V
-55 °C to +125 °C
2000 h
2500 h to 4000 h
300 000 h
500 h
IEC 60384-4 / EN 130300
55 / 125 / 56
MARKING
The capacitors are marked (where possible) with the
following information:
• Rated capacitance value (in μF)
• Tolerance on rated capacitance, code letter in accordance
with IEC 60062 (M for ± 20 %)
• Rated voltage (in V)
• Date code, in accordance with IEC 60062
• Code indicating factory of origin
• Name of manufacturer
• Upper category temperature (125 °C)
• Negative terminal identification
• Series number (140)
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(μF)
22
47
100
220
330
470
1000
1200
2200
3300
4700
Revision: 06-Oct-16
6.3
10 x 16
10 x 20
-
10
10 x 12
10 x 16
10 x 20
12.5 x 25
16 x 20
16 x 25
16 x 31
16
10 x 12
10 x 16
10 x 16
12.5 x 20
16 x 25
16 x 31
18 x 31
UR (V)
25
10 x 16
10 x 20
10 x 20
12.5 x 25
16 x 20
16 x 31
18 x 31
-
35
10 x 12
10 x 16
12.5 x 20
16 x 25
18 x 31
-
50
10 x 12
10 x 16
12.5 x 20
12.5 x 20
12.5 x 25
16 x 20
16 x 31
-
63
10 x 12
10 x 12
10 x 20
16 x 20
16 x 20
16 x 25
18 x 31
-
Document Number: 28322
1
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
140 RTM
www.vishay.com
Vishay BCcomponents
DIMENSIONS in millimeters AND AVAILABLE FORMS
ØD
ØD
L
-
+
F
15
min
4
Ød
5
min
Od
-
+
+1
0
F
Fig. 2 - Form CA: Long leads
Fig. 3 - Form CB: Cut leads
Fig. 4 - Form TFA: Taped in box (ammopack)
Table 1
DIMENSIONS in millimeters, MASS, AND PACKAGING QUANTITIES
NOMINAL
CASE SIZE
ØDxL
CASE
CODE
Ød
Ø Dmax.
Lmax.
F
MASS
(g)
PACKAGING QUANTITIES
FORM
CA
FORM
CB
FORM
TFA
10 x 12
14
0.6
10.5
13.5
5.0 ± 0.5
1.6
1000
500
800
10 x 16
15
0.6
10.5
17.5
5.0 ± 0.5
1.9
500
500
800
10 x 20
16
0.6
10.5
22.0
5.0 ± 0.5
2.2
500
500
800
12.5 x 20
17
0.6
13.0
22.0
5.0 ± 0.5
4.0
500
500
500
12.5 x 25
18
0.6
13.0
27.0
5.0 ± 0.5
5.0
250
250
500
16 x 20
19a
0.8
16.5
22.0
7.5 ± 0.5
6.0
250
250
250
16 x 25
19
0.8
16.5
27.0
7.5 ± 0.5
8.0
250
250
250
16 x 31
20
0.8
16.5
33.5
7.5 ± 0.5
9.0
100
100
250
18 x 31
1831
0.8
18.5
33.5
7.5 ± 0.5
12.5
100
100
-
Note
• For detailed tape dimensions please see www.vishay.com/doc?28360
Revision: 06-Oct-16
Document Number: 28322
2
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
140 RTM
www.vishay.com
Vishay BCcomponents
ORDERING EXAMPLE
ELECTRICAL DATA
Electrolytic capacitor 140 series
SYMBOL
DESCRIPTION
CR
Rated capacitance at 100 Hz, tolerance ± 20 %
220 μF / 25 V; ± 20 %
IR
Rated RMS ripple current at 100 kHz, 125 °C
Nominal case size: Ø 10 mm x 16 mm; form TFA
IL1
Max. leakage current after 1 min at UR
Ordering code: MAL214036221E3
Former 12NC: 2222 140 36221
tan
Z
Max. dissipation factor at 100 Hz
Max. impedance at 100 kHz
Note
• Unless otherwise specified, all electrical values in Table 2 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
6.3
10
16
25
35
50
63
CR
100 Hz
(μF)
NOMINAL
CASE SIZE
ØDxL
(mm)
IR
100 kHz
125 °C
(mA)
IL1
1 min
(μA)
tan
100 Hz
Z
100 kHz
+ 20 °C
()
Z
100 kHz
- 40 °C
()
1200
2200
330
470
1000
2200
2200
3300
4700
220
330
470
1000
2200
3300
4700
220
330
470
1000
1000
2200
3300
100
220
470
1000
2200
47
100
220
330
470
470
1000
22
47
100
220
330
470
1000
10 x 16
10 x 20
10 x 12
10 x 16
10 x 20
12.5 x 25
16 x 20
16 x 25
16 x 31
10 x 12
10 x 16
10 x 16
12.5 x 20
16 x 25
16 x 31
18 x 31
10 x 16
10 x 20
10 x 20
12.5 x 25
16 x 20
16 x 31
18 x 31
10 x 12
10 x 16
12.5 x 20
16 x 25
18 x 31
10 x 12
10 x 16
12.5 x 20
12.5 x 20
12.5 x 25
16 x 20
16 x 31
10 x 12
10 x 12
10 x 20
16 x 20
16 x 20
16 x 25
18 x 31
760
850
480
760
850
1400
1400
1900
2200
480
760
760
1200
1900
2200
2200
750
850
850
1400
1400
2200
2200
480
760
1200
1500
2200
300
380
580
870
1100
1100
1700
380
380
650
1100
1100
1500
1800
79
142
36
50
103
223
223
333
473
38
56
78
163
355
531
755
58
86
121
253
253
553
828
38
80
168
353
773
27
53
113
168
238
238
503
17
33
66
142
211
299
633
0.28
0.28
0.20
0.20
0.20
0.24
0.24
0.24
0.24
0.16
0.16
0.16
0.16
0.18
0.18
0.18
0.14
0.14
0.14
0.14
0.14
0.16
0.16
0.12
0.12
0.12
0.12
0.14
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.150
0.120
0.200
0.150
0.120
0.050
0.050
0.034
0.030
0.200
0.150
0.150
0.073
0.034
0.030
0.030
0.150
0.120
0.120
0.050
0.050
0.030
0.030
0.200
0.150
0.073
0.034
0.030
0.300
0.200
0.120
0.120
0.085
0.085
0.045
0.300
0.300
0.160
0.085
0.085
0.055
0.040
1.10
0.85
1.40
1.10
0.85
0.40
0.40
0.25
0.20
1.40
1.10
1.10
0.50
0.25
0.20
0.20
1.10
0.85
0.85
0.40
0.40
0.20
0.20
1.40
1.10
0.50
0.25
0.20
2.00
1.40
0.85
0.85
0.60
0.60
0.30
2.00
2.00
1.10
0.60
0.60
0.40
0.28
Revision: 06-Oct-16
ORDERING CODE
MAL2140 .....
BULK PACKAGING
TAPED
FORM CA
FORM CB
FORM TFA
53122E3
63122E3
33122E3
53222E3
63222E3
33222E3
54331E3
64331E3
34331E3
54471E3
64471E3
34471E3
54102E3
64102E3
34102E3
94225E3
94226E3
94223E3
54222E3
64222E3
34222E3
54332E3
64332E3
34332E3
54472E3
64472E3
34472E3
55221E3
65221E3
35221E3
55331E3
65331E3
35331E3
55471E3
65471E3
35471E3
55102E3
65102E3
35102E3
55222E3
65222E3
35222E3
55332E3
65332E3
35332E3
55472E3
65472E3
56221E3
66221E3
36221E3
56331E3
66331E3
36331E3
56471E3
66471E3
36471E3
96105E3
96106E3
96103E3
56102E3
66102E3
36102E3
56222E3
66222E3
36222E3
56332E3
66332E3
50101E3
60101E3
30101E3
50221E3
60221E3
30221E3
50471E3
60471E3
30471E3
50102E3
60102E3
30102E3
50222E3
60222E3
51479E3
61479E3
31479E3
51101E3
61101E3
31101E3
51221E3
61221E3
31221E3
51331E3
61331E3
31331E3
91475E3
91476E3
91473E3
51471E3
61471E3
31471E3
51102E3
61102E3
31102E3
58229E3
68229E3
38229E3
58479E3
68479E3
38479E3
58101E3
68101E3
38101E3
58221E3
68221E3
38221E3
58331E3
68331E3
38331E3
58471E3
68471E3
38471E3
58102E3
68102E3
-
Document Number: 28322
3
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
140 RTM
www.vishay.com
Vishay BCcomponents
ADDITIONAL ELECTRICAL DATA
PARAMETER
CONDITIONS
VALUE
Voltage
Us 1.15 x UR
Surge voltage
Urev 1 V
Reverse voltage
Current
Leakage current
After 1 min at UR
IL1 0.01 CR x UR + 3 μA
After 5 min at UR
IL5 0.002 CR x UR + 3 μA
Inductance
Case Ø D = 10 mm
Typ. 16 nH
Case Ø D 12.5 mm
Typ. 18 nH
Calculated from tan max. and CR (see Table 2)
ESR = tan /2 f CR
Equivalent series inductance (ESL)
Resistance
Equivalent series resistance (ESR)
CAPACITANCE (C)
1.2
1.2
C
C0
1.0
C
C0
1
1.1
1
2
2
0.8
2
1.0
0.6
2
0.9
0.4
Curve 1: UR < 50 V
Curve 2: UR ≥ 50 V
1
Curve 1: UR < 50 V
Curve 2: UR ≥ 50 V
1
0.2
0.8
- 60
- 40
- 20
0
20
40
60
80
100
120
140
Tamb (°C)
C0 = Typical capacitance at 20 °C, 100 Hz
102
10
103
104
105
Tamb (°C)
C0 = Typical capacitance at 20 °C, 100 Hz
Fig. 5 - Typical multiplier of capacitance
as a function of ambient temperature
f (Hz)
Fig. 6 - Typical multiplier of capacitance
as a function of frequency
EQUIVALENT SERIES RESISTANCE (ESR)
ESR
ESR0
2.0
ESR
ESR0
1.6
1
Curve 1: UR < 50 V
Curve 2: UR ≥ 50 V
2
10
Curve 1: UR < 50 V
Curve 2: UR ≥ 50 V
2
1
1.2
0.8
2
1
1
0.4
1
2
0
- 60
- 40
- 20
0
20
40
60
80
100
ESR0 = Typical capacitance at 20 °C, 100 Hz
Fig. 7 - Typical multiplier of ESR
as a function of ambient temperature
Revision: 06-Oct-16
120
Tamb (°C)
140
10
102
103
ESR0 = Typical ESR at 20 °C, 100 Hz
104
f (Hz)
105
Tamb (°C)
Fig. 8 - Typical multiplier of ESR as a function of frequency
Document Number: 28322
4
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
140 RTM
www.vishay.com
Vishay BCcomponents
RIPPLE CURRENT AND USEFUL LIFE
Table 2
ENDURANCE TEST DURATION AND USEFUL LIFE
NOMINAL CASE SIZE
ØDxL
(mm)
CASE CODE
ENDURANCE TEST
AT 125 °C
(h)
USEFUL LIFE
AT 125 °C
(h)
10 x 12
14
2000
2500
10 x 16
15
2000
3000
10 x 20
16
2000
3000
12.5 x 20
17
2000
3000
12.5 x 25
18
2000
3000
16 x 20
19a
2000
3000
16 x 25
19
2000
4000
16 x 31
20
2000
4000
18 x 31
1831
2000
4000
Note
• Multiplier of useful life code: MBC242
MBC242
IA 4.3
IR 4.2
4.1
4.0
3.9
3.8
3.7
3.6
3.5
3.4
3.3
3.2
3.1
3.0
Lifetime multiplier
2.8
0
1.
5
1.
2.6
0
2.
0
3.
2.4
0
4.
0
6.
2.2
0
8.
12
2.0
20
1.8
60
0
10
Useful life at 125 ºC and IR applied: see Table 3
(1)
0
40
(1)
1.4
1.2
1.0
0.8
0.5
0.0
0
20
IA = Actual ripple current at 100 kHz
IR = Rated ripple current at 100 kHz, 125 °C
30
1.6
40
50
60
70
80
90
100
110
120
130
Tamb (°C)
Fig. 9 - Multiplier of useful life as a function of ambient temperature
and ripple current load
Revision: 06-Oct-16
Document Number: 28322
5
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
140 RTM
www.vishay.com
Vishay BCcomponents
Table 3
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQUENCY (Hz)
UR
(V)
50
100
300
1000
3000
10 000
100 000
IR MULTIPLIER
6.3
0.60
0.70
0.85
0.90
0.95
1.00
1.00
10
0.60
0.70
0.85
0.90
0.95
1.00
1.00
16
0.60
0.70
0.85
0.90
0.95
1.00
1.00
25
0.60
0.70
0.85
0.90
0.95
1.00
1.00
35
0.50
0.65
0.80
0.85
0.90
0.95
1.00
50
0.35
0.50
0.65
0.80
0.90
0.90
1.00
63
0.35
0.50
0.65
0.80
0.90
0.90
1.00
Table 4
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST
Endurance
REFERENCE
IEC 60384-4 /
EN 130300
subclause 4.13
PROCEDURE
(quick reference)
REQUIREMENTS
Tamb = 125 °C; UR applied;
2000 h
C/C: ± 15 %
tan 1.3 x spec. limit
Z 2 x spec. limit
IL5 spec. limit
Useful life
CECC 30301
subclause 1.8.1
Tamb = 125 °C; UR and IR applied;
for test duration see Table 3
C/C: ± 30 %
tan 3 x spec. limit
Z 3 x spec. limit
IL5 spec. limit
no short or open circuit
total failure percentage: 1 %
Shelf life
IEC 60384-4 /
EN 130300
subclause 4.17
Tamb = 125 °C; no voltage applied;
500 h
After test: UR to be applied for 30 min,
24 h to 48 h before measurement
C/C: ± 15 %
tan 1.3 x spec. limit
Z 2 x spec. limit
IL5 2 x spec. limit
Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the
lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.
Revision: 06-Oct-16
Document Number: 28322
6
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2021
1
Document Number: 91000
工商网监
湘ICP备2023018690号
