MAL214276479E3

142 RHS www.vishay.com Vishay BCcomponents Aluminum Electrolytic Capacitors Radial High Temperature Standard FEATURES • Useful life: 2500 h at 105 °C • Miniaturized, high CV-product per unit volume • Charge and discharge proof • Polarized aluminum electrolytic capacitors, non-solid electrolyte • Radial leads, cylindrical aluminum case, insulated with a blue sleeve • Pressure relief for case Ø D  6.3 mm • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Higher temperature Longer life 142 RHS 038 RSU 125 °C 105 °C 140 RTM Lower Z Lower Z 150 RMI 146 RTI APPLICATIONS • Industrial, telecom and domestic appliances • Decoupling, smoothing, filtering, buffering in SMPS • Portable and mobile equipment (small size, low mass) Fig. 1 MARKING QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case sizes (Ø D x L in mm) 5 x 11 to 18 x 40 Rated capacitance range, CR 1 μF to 22 000 μF Tolerance on CR Rated voltage range, UR Category temperature range ± 20 % 10 V to 450 V -40 °C to +105 °C The capacitors are marked (where possible) with the following information: • Rated capacitance (in μF) • Tolerance on rated capacitance, code letter in accordance with IEC 60062 (M for ± 20 %) • Rated voltage (in V) • Date code, in accordance with IEC 60062 • Code indicating factory of origin Endurance test at 105 °C 2000 h • Name or logo of manufacturer Useful life at 105 °C 2500 h • Negative terminal identification Useful life at 40 °C, 1.6 x IR applied Shelf life at 0 V, 105 °C Based on sectional specification Climatic category IEC 60068 Revision: 19-Sep-16 140 000 h • Series number (142) 1000 h IEC 60384-4 / EN130300 40 / 105 / 56 Document Number: 28402 1 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 142 RHS www.vishay.com Vishay BCcomponents SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) UR (V) CR (μF) 10 16 25 35 50 63 100 1.0        2.2       5 x 11 4.7      5 x 11 6.3 x 11 10      5 x 11 8 x 12 22     5 x 11 6.3 x 11 8 x 12 33      6.3 x 11 10 x 12 47   5 x 11 5 x 11 6.3 x 11 8 x 12 10 x 16 100  5 x 11 6.3 x 11 6.3 x 11 8 x 12 10 x 12 10 x 20 220  6.3 x 11 8 x 12 8 x 12 10 x 12 10 x 16 12.5 x 25 330 6.3 x 11 8 x 12  10 x 12 10 x 16 10 x 20 16 x 25 470 8 x 12 10 x 12 10 x 12 10 x 16 12.5 x 20 12.5 x 20 16 x 31 1000 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 25 18 x 40 2200 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 35 18 x 40 - 3300  12.5 x 25 16 x 25 16 x 31 18 x 35 - - 4700 12.5 x 25 16 x 25 16 x 31 18 x 35 - - - 6800 16 x 25 16 x 31 18 x 35 - - - - 10 000 16 x 31 18 x 31 - - - - - 22 000 18 x 40 - - - - - - SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) UR (V) CR (μF) 200 250 350 400 450 1.0 5 x 11 5 x 11 6.3 x 11 6.3 x 11 8 x 12 2.2 6.3 x 11 6.3 x 11 8 x 12 8 x 12 10 x 12 4.7 8 x 12 8 x 12 10 x 12 10 x 12 10 x 16 10 10 x 12 10 x 12 10 x 16 10 x 20 12.5 x 20 22 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 33  12.5 x 20   16 x 25 47 12.5 x 20 12.5 x 25 16 x 25 16 x 31 16 x 35 100 16 x 25 16 x 31 18 x 35 18 x 40 - 220 18 x 35 - - - - Revision: 19-Sep-16 Document Number: 28402 2 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 142 RHS www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters AND AVAILABLE FORMS ØD ØD L F 15 min. Ød 4 +1 0 5 min. + Ød F Fig. 2 - Form CA Long leads Fig. 3 - Form CB Cut leads Case Ø D = 5 mm to 8 mm; Lead space F is 5 mm Dimensions of lead space F see Table 2 Fig. 4 - Form TNA, Form TFA Taped in box (ammopack), straight leads Fig. 5 - Form TFA Taped in box (ammopack), formed leads Table 1 DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE ØDxL CASE CODE Ød Ø Dmax. Lmax. F MASS (g) PACKAGING QUANTITIES FORM CA FORM CB FORM TFA, TNA 5 x 11 11 0.5 5.5 12.5 2.0 ± 0.5  0.4 5000 - 2000 6.3 x 11 12 0.5 6.8 12.5 2.5 ± 0.5  0.6 5000 - 2000 8 x 12 13 0.6 8.5 13.0 3.5 ± 0.5  1.1 5000 - 1000 10 x 12 14 0.6 10.5 13.5 5.0 ± 0.5  1.6 3000 1000 500 10 x 16 15 0.6 10.5 17.5 5.0 ± 0.5  1.9 2500 1000 500 10 x 20 16 0.6 10.5 22.0 5.0 ± 0.5  2.2 2000 800 500 12.5 x 20 17 0.6 13.0 22.0 5.0 ± 0.5  4.0 1500 400 300 12.5 x 25 18 0.6 13.0 27.0 5.0 ± 0.5  5.0 1000 400 300 16 x 20 19a 0.8 16.5 22.0 7.5 ± 0.5  6.0 1000 200 200 16 x 25 19 0.8 16.5 27.0 7.5 ± 0.5  8.0 750 200 200 16 x 31 20 0.8 16.5 33.5 7.5 ± 0.5  9.0 600 200 200 16 x 35 21 0.8 16.5 37.5 7.5 ± 0.5  11.0 500 200 - 18 x 31 1831 0.8 18.5 33.5 7.5 ± 0.5  12.5 400 150 - 18 x 35 22 0.8 18.5 37.5 7.5 ± 0.5  14.5 400 150 - 18 x 40 23 0.8 18.5 42.0 7.5 ± 0.5  16.0 400 150 - Note • For detailed tape dimensions please refer to packaging information: www.vishay.com/doc?28360 Revision: 19-Sep-16 Document Number: 28402 3 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 142 RHS www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA SYMBOL Electrolytic capacitor 142 series DESCRIPTION CR Rated capacitance at 100 Hz, tolerance ± 20 % IR Rated RMS ripple current at 100 Hz, 105 ºC IL2 Max. leakage current after 2 min at UR = 10 V to 100 V IL5 Max. leakage current after 5 min at UR = 200 V to 450 V tan  470 μF / 25 V; ± 20 % Nominal case size: Ø 10 mm x 12 mm; Form TFA Ordering Code: MAL214236471E3 Max. dissipation factor at 100 Hz Note • Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %. Table 2 ELECTRICAL DATA AND ORDERING INFORMATION ORDERING CODE MAL2142... UR (V) IR NOMINAL IL2 CR CASE SIZE 100 Hz tan  FREQ. 100 Hz 2 min 105 ºC ØDxL 100 Hz CODE (1) (μF) (μA) (mA) (mm) 330 10 16 25 6.3 x 11 200 33 0.20 MF2 BULK PACKAGING LONG LEADS TAPED AMMOPACK CUT LEADS FORM CA F (mm) FORM CB F (mm) FORM TNA F (mm) FORM TFA F (mm) 54331E3 2.5 - - 74331E3 2.5 34331E3 5.0 470 8 x 12 290 47 0.20 MF2 54471E3 3.5 - - 74471E3 3.5 34471E3 5.0 1000 10 x 12 460 100 0.20 MF2 54102E3 5.0 64102E3 5.0 - - 34102E3 5.0 2200 10 x 20 760 220 0.22 MF3 54222E3 5.0 64222E3 5.0 - - 34222E3 5.0 4700 12.5 x 25 1260 470 0.26 MF3 54472E3 5.0 64472E3 5.0 - - 34472E3 5.0 6800 16 x 25 1690 680 0.28 MF3 54682E3 7.5 64682E3 7.5 - - 34682E3 7.5 10 000 16 x 31 2120 1000 0.30 MF3 54103E3 7.5 64103E3 7.5 - - 34103E3 7.5 22 000 18 x 40 3100 2200 0.32 MF3 54223E3 7.5 64223E3 7.5 - - - - 100 5 x 11 110 16 0.16 MF2 55101E3 2.0 - - 75101E3 2.5 35101E3 5.0 220 6.3 x 11 190 35 0.16 MF2 55221E3 2.5 - - 75221E3 2.5 35221E3 5.0 330 8 x 12 270 53 0.16 MF2 55331E3 3.5 - - 75331E3 3.5 35331E3 5.0 470 10 x 12 370 75 0.16 MF2 55471E3 5.0 65471E3 5.0 - - 35471E3 5.0 1000 10 x 16 560 160 0.16 MF2 55102E3 5.0 65102E3 5.0 - - 35102E3 5.0 2200 12.5 x 20 920 352 0.18 MF3 55222E3 5.0 65222E3 5.0 - - 35222E3 5.0 3300 12.5 x 25 1170 528 0.20 MF3 55332E3 5.0 65332E3 5.0 - - 35332E3 5.0 4700 16 x 25 1480 752 0.22 MF3 55472E3 7.5 65472E3 7.5 - - 35472E3 7.5 6800 16 x 31 1930 1088 0.24 MF3 55682E3 7.5 65682E3 7.5 - - 35682E3 7.5 10 000 18 x 31 2330 1600 0.26 MF3 55103E3 7.5 65103E3 7.5 - - - - 47 5 x 11 97 12 0.14 MF1 56479E3 2.0 - - 76479E3 2.5 36479E3 5.0 100 6.3 x 11 142 25 0.14 MF2 56101E3 2.5 - - 76101E3 2.5 36101E3 5.0 220 8 x 12 236 55 0.14 MF2 56221E3 3.5 - - 76221E3 3.5 36221E3 5.0 470 10 x 12 380 118 0.14 MF2 56471E3 5.0 66471E3 5.0 - - 36471E3 5.0 1000 10 x 20 680 250 0.14 MF2 56102E3 5.0 66102E3 5.0 - - 36102E3 5.0 2200 12.5 x 25 1110 550 0.16 MF3 56222E3 5.0 66222E3 5.0 - - 36222E3 5.0 3300 16 x 25 1440 825 0.18 MF3 56332E3 7.5 66332E3 7.5 - - 36332E3 7.5 4700 16 x 31 1710 1175 0.20 MF3 56472E3 7.5 66472E3 7.5 - - 36472E3 7.5 6800 18 x 35 2160 1700 0.22 MF3 56682E3 7.5 66682E3 7.5 - - - - Revision: 19-Sep-16 Document Number: 28402 4 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 142 RHS www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION ORDERING CODE MAL2142... UR (V) 35 50 63 100 IR NOMINAL IL2 CR CASE SIZE 100 Hz tan  FREQ. 100 Hz 2 min 105 ºC ØDxL 100 Hz CODE (1) (μF) (μA) (mA) (mm) BULK PACKAGING LONG LEADS FORM CA F (mm) TAPED AMMOPACK CUT LEADS FORM CB F (mm) FORM TNA F (mm) FORM TFA F (mm) 47 5 x 11 90 16 0.12 MF1 50479E3 2.0 - - 70479E3 2.5 30479E3 5.0 100 6.3 x 11 150 35 0.12 MF2 50101E3 2.5 - - 70101E3 2.5 30101E3 5.0 220 8 x 12 270 77 0.12 MF2 50221E3 3.5 - - 70221E3 3.5 30221E3 5.0 330 10 x 12 350 116 0.12 MF2 50331E3 5.0 60331E3 5.0 - - 30331E3 5.0 470 10 x 16 460 165 0.12 MF2 50471E3 5.0 60471E3 5.0 - - 30471E3 5.0 1000 12.5 x 20 810 350 0.12 MF2 50102E3 5.0 60102E3 5.0 - - 30102E3 5.0 2200 16 x 25 1260 770 0.14 MF3 50222E3 7.5 60222E3 7.5 - - 30222E3 7.5 3300 16 x 31 1420 1155 0.16 MF3 50332E3 7.5 60332E3 7.5 - - 30332E3 7.5 4700 18 x 35 1900 1645 0.18 MF3 50472E3 7.5 60472E3 7.5 - - - - 22 5 x 11 78 11 0.10 MF1 51229E3 2.0 - - 71229E3 2.5 31229E3 5.0 47 6.3 x 11 120 24 0.10 MF1 51479E3 2.5 - - 71479E3 2.5 31479E3 5.0 100 8 x 12 188 50 0.10 MF2 51101E3 3.5 - - 71101E3 3.5 31101E3 5.0 220 10 x 12 240 110 0.10 MF2 51221E3 5.0 61221E3 5.0 - - 31221E3 5.0 330 10 x 16 410 165 0.10 MF2 51331E3 5.0 61331E3 5.0 - - 31331E3 5.0 470 12.5 x 20 530 235 0.10 MF2 51471E3 5.0 61471E3 5.0 - - 31471E3 5.0 1000 12.5 x 25 950 500 0.10 MF2 51102E3 5.0 61102E3 5.0 - - 31102E3 5.0 2200 16 x 35 1470 1100 0.12 MF3 51222E3 7.5 61222E3 7.5 - - - - 3300 18 x 35 1770 1650 0.14 MF3 51332E3 7.5 61332E3 7.5 - - - - 4.7 5 x 11 36 3 0.09 MF1 58478E3 2.0 - - 78478E3 2.5 38478E3 5.0 10 5 x 11 54 6 0.09 MF1 58109E3 2.0 - - 78109E3 2.5 38109E3 5.0 22 6.3 x 11 86 14 0.09 MF1 58229E3 2.5 - - 78229E3 2.5 38229E3 5.0 33 6.3 x 11 100 21 0.09 MF1 58339E3 2.5 - - 78339E3 2.5 38339E3 5.0 47 8 x 12 141 30 0.09 MF1 58479E3 3.5 - - 78479E3 3.5 38479E3 5.0 100 10 x 12 235 63 0.09 MF2 58101E3 5.0 68101E3 5.0 - - 38101E3 5.0 220 10 x 16 335 139 0.09 MF2 58221E3 5.0 68221E3 5.0 - - 38221E3 5.0 330 10 x 20 510 208 0.09 MF2 58331E3 5.0 68331E3 5.0 - - 38331E3 5.0 470 12.5 x 20 640 296 0.09 MF2 58471E3 5.0 68471E3 5.0 - - 38471E3 5.0 1000 16 x 25 930 630 0.09 MF2 58102E3 7.5 68102E3 7.5 - - 38102E3 7.5 2200 18 x 40 2340 1380 0.09 MF3 58222E3 7.5 68222E3 7.5 - - - - 2.2 5 x 11 30 3 0.08 MF1 59228E3 2.0 - - 79228E3 2.5 39228E3 5.0 4.7 6.3 x 11 40 5 0.08 MF1 59478E3 2.5 - - 79478E3 2.5 39478E3 5.0 10 8 x 12 66 10 0.08 MF1 59109E3 3.5 - - 79109E3 3.5 39109E3 5.0 22 8 x 12 99 22 0.08 MF1 59229E3 3.5 - - 79229E3 3.5 39229E3 5.0 33 10 x 12 148 33 0.08 MF1 59339E3 5.0 69339E3 5.0 - - 39339E3 5.0 47 10 x 16 180 47 0.08 MF1 59479E3 5.0 69479E3 5.0 - - 39479E3 5.0 100 10 x 20 265 100 0.08 MF2 59101E3 5.0 69101E3 5.0 - - 39101E3 5.0 220 12.5 x 25 440 220 0.08 MF2 59221E3 5.0 69221E3 5.0 - - 39221E3 5.0 330 16 x 25 540 330 0.08 MF2 59331E3 7.5 69331E3 7.5 - - 39331E3 7.5 470 16 x 31 715 470 0.08 MF2 59471E3 7.5 69471E3 7.5 - - 39471E3 7.5 1000 18 x 40 985 1000 0.08 MF2 59102E3 7.5 69102E3 7.5 - - - - Revision: 19-Sep-16 Document Number: 28402 5 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 142 RHS www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION ORDERING CODE MAL2142... UR (V) 200 250 350 400 450 IR NOMINAL IL2 CR CASE SIZE 100 Hz tan  FREQ. 100 Hz 2 min 105 ºC ØDxL 100 Hz CODE (1) (μF) (μA) (mA) (mm) BULK PACKAGING LONG LEADS FORM CA F (mm) TAPED AMMOPACK CUT LEADS FORM CB F (mm) FORM TNA F (mm) FORM TFA F (mm) 1.0 5 x 11 18 21 0.14 MF1 52108E3 2.0 - - 72108E3 2.5 32108E3 5.0 2.2 6.3 x 11 30 28 0.14 MF1 52228E3 2.5 - - 72228E3 2.5 32228E3 5.0 4.7 8 x 12 54 43 0.14 MF1 52478E3 3.5 - - 72478E3 3.5 32478E3 5.0 10 10 x 12 94 65 0.14 MF1 52109E3 5.0 62109E3 5.0 - - 32109E3 5.0 22 10 x 16 142 113 0.14 MF1 52229E3 5.0 62229E3 5.0 - - 32229E3 5.0 47 12.5 x 20 250 213 0.14 MF1 52479E3 5.0 62479E3 5.0 - - 32479E3 5.0 100 16 x 25 485 425 0.14 MF2 52101E3 7.5 62101E3 7.5 - - 32101E3 7.5 220 18 x 35 835 905 0.14 MF2 52221E3 7.5 62221E3 7.5 - - - - 1.0 5 x 11 16 23 0.17 MF1 51083E3 2.0 - - 71083E3 2.5 31083E3 5.0 2.2 6.3 x 11 35 32 0.17 MF1 52283E3 2.5 - - 72283E3 2.5 32283E3 5.0 4.7 8 x 12 60 50 0.17 MF1 54783E3 3.5 - - 74783E3 3.5 34783E3 5.0 10 10 x 12 92 75 0.17 MF1 51093E3 5.0 61093E3 5.0 - - 31093E3 5.0 22 10 x 20 215 135 0.17 MF1 52293E3 5.0 62293E3 5.0 - - 32293E3 5.0 33 12.5 x 20 315 190 0.17 MF1 53393E3 5.0 63393E3 5.0 - - 33393E3 5.0 47 12.5 x 25 350 260 0.17 MF1 54793E3 5.0 64793E3 5.0 - - 34793E3 5.0 100 16 x 31 530 525 0.17 MF2 51013E3 7.5 61013E3 7.5 - - 31013E3 7.5 1.0 6.3 x 11 23 26 0.20 MF1 51085E3 2.5 - - 71085E3 2.5 31085E3 5.0 2.2 8 x 12 41 38 0.20 MF1 52285E3 3.5 - - 72285E3 3.5 32285E3 5.0 4.7 10 x 12 65 58 0.20 MF1 54785E3 5.0 64785E3 5.0 - - 34785E3 5.0 10 10 x 16 105 95 0.20 MF1 51095E3 5.0 61095E3 5.0 - - 31095E3 5.0 22 12.5 x 20 210 179 0.20 MF1 52295E3 5.0 62295E3 5.0 - - 32295E3 5.0 7.5 47 16 x 25 365 354 0.20 MF1 54795E3 7.5 64795E3 7.5 - - 34795E3 100 18 x 35 505 725 0.20 MF2 51015E3 7.5 61015E3 7.5 - - - - 1.0 6.3 x 11 21 27 0.25 MF1 51086E3 2.5 - - 71086E3 2.5 31086E3 5.0 2.2 8 x 12 39 41 0.25 MF1 52286E3 3.5 - - 72286E3 3.5 32286E3 5.0 4.7 10 x 12 70 63 0.25 MF1 54786E3 5.0 64786E3 5.0 - - 34786E3 5.0 10 10 x 20 125 105 0.25 MF1 51096E3 5.0 61096E3 5.0 - - 31096E3 5.0 22 12.5 x 25 235 201 0.25 MF1 52296E3 5.0 62296E3 5.0 - - 32296E3 5.0 47 16 x 31 390 401 0.25 MF1 54796E3 7.5 64796E3 7.5 - - 34796E3 7.5 100 18 x 40 530 825 0.25 MF2 51016E3 7.5 61016E3 7.5 - - - - 1.0 8 x 12 27 29 0.25 MF1 57108E3 3.5 - - 77108E3 3.5 37108E3 5.0 2.2 10 x 12 48 45 0.25 MF1 57228E3 5.0 67228E3 5.0 - - 37228E3 5.0 5.0 4.7 10 x 16 75 67 0.25 MF1 57478E3 5.0 67478E3 5.0 - - 37478E3 10 12.5 x 20 145 115 0.25 MF1 57109E3 5.0 67109E3 5.0 - - 37109E3 5.0 22 16 x 20 245 223 0.25 MF1 57229E3 7.5 67229E3 7.5 - - 37229E3 7.5 33 16 x 25 325 322 0.25 MF1 57339E3 7.5 67339E3 7.5 - - 37339E3 7.5 47 16 x 35 420 448 0.25 MF1 57479E3 7.5 67479E3 7.5 - - - - Note (1) Determines the applicable row in the table “Multiplier of Ripple Current (I ) as a Function of Frequency” R Revision: 19-Sep-16 Document Number: 28402 6 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 142 RHS www.vishay.com Vishay BCcomponents ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Us  1.15 x UR Surge voltage Urev  1 V Reverse voltage Current Leakage current After 2 min at UR = 10 V to 100 V IL2  0.01 CR x UR or 3 μA, whichever is greater After 5 min at UR = 200 V to 450 V IL5  0.03 CR x UR + 15 μA (CR x UR  1000) IL5  0.02 CR x UR + 25 μA (CR x UR > 1000) Inductance Case Ø D  8 mm Typ. 13 nH Case Ø D = 10 mm Typ. 16 nH Case Ø D  12.5 mm Typ. 18 nH Calculated from tan max. and CR (see Table 2) ESR = tan /2 f CR Equivalent series inductance (ESL) Resistance Equivalent series resistance (ESR) CAPACITANCE (C) 1.2 C C0 1.1 1.1 C C0 1.0 1 2 3 3 2 1.0 0.9 3 0.9 2 0.8 0.8 1 Curve 1: 10 V Curve 2: 63 V Curve 3: 100 V 0.7 1 0.7 0.6 Curve 1: 10 V Curve 2: 63 V Curve 3: 100 V 0.6 - 60 - 40 - 20 0 20 40 60 80 100 120 Tamb (°C) C0 = Capacitance at 20 °C, 100 Hz Fig. 6 - Typical multiplier of capacitance as a function of ambient temperature 10 103 102 f (Hz) C0 = Capacitance at 20 °C, 100 Hz 104 Tamb (20 °C) Fig. 7 - Typical multiplier of capacitance as a function of frequency RIPPLE CURRENT AND USEFUL LIFE Table 3 ENDURANCE TEST DURATION AND USEFUL LIFE ENDURANCE AT 105 °C (h) USEFUL LIFE AT 105 °C (h) 2000 2500 Note • Multiplier of useful life code: CCC206 Revision: 19-Sep-16 Document Number: 28402 7 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 142 RHS www.vishay.com Vishay BCcomponents CCC206 3.8 IA 3.7 IR 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.8 Lifetime multiplier 2.6 0 1. 2.4 5 1. 0 2. 2.2 0 3. 0 4. 2.0 0 6. 0 8. 1.8 12 20 60 Useful life at 105 °C and IR applied 30 (1) (1) 0 10 0 15 00 2 1.6 1.4 1.2 1.0 0.8 0.5 0.0 IA = Actual ripple current at 100 Hz, 105 °C IR = Rated ripple current at 100 Hz, 105 °C 40 50 60 70 80 90 100 110 Tamb (°C) Fig. 8 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 4 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQ. CODE 50 100 MF1 MF2 MF3 0.70 0.75 0.80 1.00 1.00 1.00 FREQUENCY (Hz) 500 IR MULTIPLIER 1.30 1.20 1.10 1000 10 000 1.40 1.30 1.12 1.50 1.35 1.15 Table 5 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance Useful life Shelf life (storage at high temperature) Surge REFERENCE IEC 60 384-4 / EN130 300 subclause 4.13 PROCEDURE (quick reference) Tamb = 105 °C; UR applied; 2000 h CECC 30 301 subclause 1.8.1 Tamb = 105 °C; UR and IR applied; 2500 h IEC 60 384-4 / EN130 300 subclause 4.17 IEC 60 384-4 / EN130 300 subclause 4.14 Tamb = 105 °C; no voltage applied; 1000 h After test: UR to be applied for 30 min, 24 h to 48 h before measurement From source of 1.15 x UR: RC = 0.1 s ± 0.05 s; 1000 cycles of 30 s on, 330 s off, at 105 °C REQUIREMENTS C/C: ± 20 % tan   2 x spec. limit IL5  spec. limit C/C: ± 30 % tan   3 x spec. limit IL5  spec. limit no short or open circuit total failure percentage: 1 % C/C: ± 20 % tan   2 x spec. limit IL5  spec. limit C/C: ± 25 % tan   1.5 x spec. limit IL5  spec. limit    Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability. Revision: 19-Sep-16 Document Number: 28402 8 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000