MAL215236109E3

152 RMH www.vishay.com Vishay BCcomponents Aluminum Electrolytic Capacitors Radial Miniature, High Voltage FEATURES 152 RMH low voltage • Long useful life: 3000 h to 4000 h at 105 °C • AEC-Q200 qualified • Miniaturized, ultra high CV-product per unit volume • High reliability • Polarized aluminum electrolytic capacitors, non-solid electrolyte • Radial leads, cylindrical aluminum case, insulated with a blue sleeve • Pressure relief • Charge and discharge proof • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 148 RUS Fig. 1 APPLICATIONS QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (Ø D x L in mm) Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Category temperature range Endurance test at 105 °C Useful life at 105 °C: Case Ø D = 10 mm and 12.5 mm Case Ø D = 16 mm and 18 mm Useful life at 40 °C, 1.6 x IR applied: Case Ø D = 10 mm and 12.5 mm Case Ø D = 16 mm and 18 mm Shelf life at 0 V, 105 °C Based on sectional specification Climatic category IEC 60068 VALUE 10 x 12 to 18 x 35 1.5 μF to 220 μF ± 20 % 200 V to 450 V -40 °C to +105 °C 2000 h 3000 h 4000 h 200 000 h 260 000 h 1000 h IEC 60384-4 / EN 130300 40 / 105 / 56 • Automotive • High-reliability and professional applications • Lighting, monitors, consumer electronics, industrial • Filtering of high voltages in power supplies general MARKING The capacitors are marked (where possible) with the following information: • Rated capacitance value (in μF) • Tolerance on rated capacitance, code letter in accordance with IEC 60062 (M for ± 20 %) • Rated voltage (in V) • Date code, in accordance with IEC 60062 • Code indicating factory of origin • Name of manufacturer • Upper category temperature (105 °C) • Negative terminal identification • Series number (152) SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) CR (μF) 1.5 2.2 4.7 6.8 10 22 33 47 68 100 220 Revision: 17-Mar-17 UR (V) 200 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 35 250 10 x 16 12.5 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 25 - 400 10 x 12 10 x 16 10 x 12 10 x 16 10 x 20 12.5 x 25 16 x 20 16 x 20 16 x 25 16 x 35 18 x 35 - 450 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 20 16 x 25 18 x 20 16 x 35 18 x 25 18 x 35 - Document Number: 28320 1 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 152 RMH www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters AND AVAILABLE FORMS 4+1 -0 L Ød + + F F ØD ØD - 5 min L Ød 15 min Fig. 2 - Form CA: Long leads Fig. 3 - Form CB: Cut leads Fig. 4 - Form TFA: Taped in box (ammopack) Table 1 DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE ØDxL CASE CODE Ød Ø Dmax. Lmax. F MASS (g) 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 25 16 x 35 18 x 20 18 x 25 18 x 35 14 15 16 17 18 19a 19 21 1820 1825 22 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 10.5 10.5 10.5 13.0 13.0 16.5 16.5 16.5 18.5 18.5 18.5 13.5 17.5 22.0 22.0 27.0 22.0 27.0 37.5 22.0 27.0 37.5 5.0 ± 0.5 5.0 ± 0.5 5.0 ± 0.5 5.0 ± 0.5 5.0 ± 0.5 7.5 ± 0.5 7.5 ± 0.5 7.5 ± 0.5 7.5 ± 0.5 7.5 ± 0.5 7.5 ± 0.5  1.6  1.9  2.2  4.0  5.0  6.0  8.0  11.0  8.0  10.0  14.5 PACKAGING QUANTITIES FORM FORM FORM CA CB TFA 1000 500 800 500 500 800 500 500 800 500 500 500 250 250 500 250 250 250 250 250 250 100 100 100 100 100 100 100 100 - Note • For detailed tape dimensions please see www.vishay.com/doc?28360 ELECTRICAL DATA SYMBOL CR IR IL1 tan  Z DESCRIPTION Rated capacitance at 100 Hz, tolerance ± 20 % Rated RMS ripple current at 100 Hz, 105 °C Max. leakage current after 1 min at UR Max. dissipation factor at 100 Hz Max. impedance at 10 kHz ORDERING EXAMPLE Electrolytic capacitor 152 series 4.7 μF / 400 V; ± 20 % Nominal case size: Ø 10 mm x 16 mm; form TFA Ordering code: MAL215236478E3 Former 12NC: 2222 152 36478 Note • Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %. Revision: 17-Mar-17 Document Number: 28320 2 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 152 RMH www.vishay.com Vishay BCcomponents Table 2 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 200 250 400 450 CR 100 Hz (μF) 10 22 33 47 68 100 220 10 22 33 47 47 100 2.2 4.7 4.7 6.8 10 22 22 33 47 68 100 1.5 2.2 4.7 6.8 10 22 22 33 33 47 NOMINAL CASE SIZE ØDxL (mm) 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 35 10 x 16 12.5 x 20 12.5 x 20 12.5 x 25 16 x 20 16 x 25 10 x 12 10 x 12 10 x 16 10 x 16 10 x 20 12.5 x 25 16 x 20 16 x 20 16 x 25 16 x 35 18 x 35 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 20 16 x 25 18 x 20 16 x 35 18 x 25 18 x 35 IR 100 Hz 105 °C (mA) 85 120 150 240 310 340 630 105 180 180 310 310 340 44 48 65 65 80 150 150 190 240 310 380 30 50 65 80 90 150 150 200 200 260 ORDERING CODE MAL2152 ....... IL1 1 min (μA) tan  100 Hz Z 10 kHz () FORM CA FORM CB FORM TFA 130 202 268 352 478 670 1390 145 235 318 423 423 820 96 127 126 152 190 334 334 466 634 886 1270 90 99 133 162 205 367 367 516 516 705 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 6.3 3.2 2.3 0.9 0.6 0.4 0.2 6.3 2.3 1.5 0.9 0.9 0.4 28.0 24.0 18.0 12.0 9.0 3.8 3.8 2.6 2.0 1.7 0.9 26.0 26.0 20.0 16.0 10.0 4.6 4.6 3.4 3.4 2.0 52109E3 52229E3 52339E3 52479E3 52689E3 52101E3 52221E3 53109E3 53229E3 53339E3 53479E3 93475E3 53101E3 56228E3 96475E3 56478E3 56688E3 56109E3 56229E3 96225E3 56339E3 56479E3 56689E3 56101E3 57158E3 57228E3 57478E3 57688E3 57109E3 57229E3 97225E3 57339E3 97335E3 57479E3 62109E3 62229E3 62339E3 62479E3 62689E3 62101E3 62221E3 63109E3 63229E3 63339E3 63479E3 93476E3 63101E3 66228E3 96476E3 66478E3 66688E3 66109E3 66229E3 96226E3 66339E3 66479E3 66689E3 66101E3 67158E3 67228E3 67478E3 67688E3 67109E3 67229E3 97226E3 67339E3 97336E3 67479E3 32109E3 32229E3 32339E3 32479E3 32689E3 32101E3 33109E3 33229E3 33339E3 33479E3 93473E3 33101E3 36228E3 96473E3 36478E3 36688E3 36109E3 36229E3 96223E3 36339E3 36479E3 37158E3 37228E3 37478E3 37688E3 37109E3 37229E3 - BULK PACKAGING TAPED ADDITIONAL ELECTRICAL DATA PARAMETER Voltage Surge voltage CONDITIONS VALUE UR = 200 V to 250 V UR = 400 V to 450 V Us 1.15 x UR Us 1.10 x UR Urev 1 V After 1 min at UR After 5 min at UR IL1  0.03 CR x UR + 70 μA IL5  0.015 CR x UR + 30 μA Case Ø D = 10 mm Case Ø D  12.5 mm Typ. 16 nH Typ. 18 nH Calculated from tan max. and CR (see Table 2) ESR = tan /2f CR Reverse voltage Current Leakage current Inductance Equivalent series inductance (ESL) Resistance Equivalent series resistance (ESR) Revision: 17-Mar-17 Document Number: 28320 3 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 152 RMH www.vishay.com Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE Table 3 ENDURANCE TEST DURATION AND USEFUL LIFE NOMINAL CASE SIZE ØDxL (mm) ENDURANCE AT 105 °C (h) USEFUL LIFE AT 105 °C (h) USEFUL LIFE AT 40 °C 1.6 x IR APPLIED (h) 10 x 12 2000 3000 200 000 10 x 16 2000 3000 200 000 10 x 20 2000 3000 200 000 12.5 x 20 2000 3000 200 000 12.5 x 25 2000 3000 200 000 16 x 20 2000 4000 260 000 16 x 25 2000 4000 260 000 16 x 35 2000 4000 260 000 18 x 20 2000 4000 260 000 18 x 25 2000 4000 260 000 18 x 35 2000 4000 260 000 Note • Multiplier of useful life code: CCC206 CCC206 3.8 IA 3.7 IR 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.8 Lifetime multiplier 2.6 0 1. 2.4 5 1. 0 2. 2.2 0 3. 0 4. 2.0 0 6. 0 8. 1.8 20 60 1.4 1.2 1.0 0.8 0.5 0.0 (1) 0 10 0 15 0 20 Useful life at 105 °C and IR applied Case Ø D = 10 mm and 12.5 mm: 3000 h Case Ø D = 16 mm and 18 mm: 4000 h 1.6 30 (1) 12 IA = Actual ripple current at 100 Hz IR = Rated ripple current at 100 Hz, 105 °C 40 50 60 70 80 90 100 110 Tamb (°C) Fig. 5 - Multiplier of useful life as a function of ambient temperature and ripple current load Revision: 17-Mar-17 Document Number: 28320 4 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 152 RMH www.vishay.com Vishay BCcomponents Table 4 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) UR (V) 50 100 300 200 0.75 1.00 1.50 250 0.75 1.00 400 0.75 1.00 450 0.75 1.00 3000 10 000  100 000 2.00 2.20 2.50 3.00 1.50 2.00 2.20 2.50 3.00 1.30 1.60 1.90 2.20 2.50 1.30 1.60 1.90 2.20 2.50 1000 IR MULTIPLIER Table 5 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE PROCEDURE (quick reference) REQUIREMENTS IEC 60384-4 / EN 130300 subclause 4.13 Tamb = 105 °C; UR applied; 2000 h C/C: ± 20 % tan   2 x spec. limit Z  2 x spec. limit IL5  spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 105 °C; UR and IR applied; Case Ø D = 10 mm and 12.5 mm: 3000 h Case Ø D = 16 mm and 18 mm: 4000 h C/C: ± 50 % tan   3 x spec. limit Z  3 x spec. limit IL5  spec. limit no short or open circuit total failure percentage:  1 % Shelf life (storage at high temperature) IEC 60384-4 / EN 130300 subclause 4.17 Tamb = 105 °C; no voltage applied; 1000 h After test: UR to be applied for 30 min, 24 h to 48 h before measurement C/C: ± 20 % tan   2 x spec. limit Z  2 x spec. limit IL5  2 x spec. limit Reverse voltage IEC 60384-4 / EN 130300 subclause 4.15 Tamb = 105 °C: 125 h at U = -1 V, followed by 125 h at UR C/C: ± 15 % IL5  spec. limit tan   spec. limit Endurance                            Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability. Revision: 17-Mar-17 Document Number: 28320 5 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000