MAL215371101E3

153 CRV www.vishay.com Vishay BCcomponents Aluminum Electrolytic Capacitors SMD (Chip) Long Life Vertical FEATURES • Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing • SMD-version with base plate, vertical construction requiring minimum board space, lead (Pb)-free reflow solderable • High CV per unit volume • Long useful life: 2000 h to 3000 h at 105 °C • Charge and discharge proof, no peak current limitation • Supplied in blister tape on reel 175 TMP 175 °C solid SMD 140 CRH 125 °C High temp. 153 CRV • ATTENTION: for maximum safe soldering conditions refer to Fig. 4 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • SMD technology, in compliance with RoHS Low Z • Coupling, decoupling, smoothing, filtering, buffering, timing 150 CRZ • Telecommunications, general industrial, EDP, automotive, portable and lightweight equipment Fig. 1 MARKING QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (L x W x H in mm) Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Category temperature range Endurance test at 105 °C: Case sizes 4.0 x 4.0 x 5.3 to 6.3 x 6.3 x 5.3 Case sizes 8.0 x 8.0 x 6.5 to 10 x 10 x 14 Useful life at 105 °C: Case sizes 4.0 x 4.0 x 5.3 to 6.3 x 6.3 x 5.3 Case sizes 8.0 x 8.0 x 6.5 to 10 x 10 x 14 Useful life at 40 °C; 1.3 x lR applied: Case sizes 4.0 x 4.0 x 5.3 to 6.3 x 6.3 x 5.3 Case sizes 8.0 x 8.0 x 6.5 to 10 x 10 x 14 Shelf life at 0 V, 105 °C Based on sectional specification Climatic category IEC 60068 Revision: 15-Dec-2020 VALUE 4.0 x 4.0 x 5.3 to 10 x 10 x 14 0.47 μF to 1000 μF ± 20 % 6.3 V to 100 V -55 °C to +105 °C • Rated capacitance (in μF) • Rated voltage (in V) • Date code • Black mark or “-” sign indicating the cathode (the anode is identified by bevelled edges) PACKAGING 1000 h Supplied in blister tape on reel 2000 h 2000 h 3000 h 200 000 h 300 000 h 1000 h IEC 60384-18 / CECC 32300 55 / 105 / 56 Document Number: 28388 1 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 153 CRV www.vishay.com Vishay BCcomponents SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm) UR (V) CR (μF) 6.3 10 16 25 35 50 63 100 0.47 - - - - - 4.0 x 4.0 x 5.3 - - 1.0 - - - - - 4.0 x 4.0 x 5.3 - - 2.2 - - - - - 4.0 x 4.0 x 5.3 - - 3.3 - - - - - 4.0 x 4.0 x 5.3 - - 4.7 - - - - 4.0 x 4.0 x 5.3 5.0 x 5.0 x 5.3 - - 10 - - 4.0 x 4.0 x 5.3 - 5.0 x 5.0 x 5.3 6.3 x 6.3 x 5.3 -  - 22 4.0 x 4.0 x 5.3 - 5.0 x 5.0 x 5.3 - 6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5 -  - 33 - 5.0 x 5.0 x 5.3 - 6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5 8.0 x 8.0 x 10 -  10 x 10 x 14 47 5.0 x 5.0 x 5.3 - 6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5 - 8.0 x 8.0 x 10 - - 6.3 x 6.3 x 5.3 - 8.0 x 8.0 x 6.5 8.0 x 8.0 x 10 - 10 x 10 x 10 10 x 10 x 14 - - - - - - - - - 220 - 8.0 x 8.0 x 10 10 x 10 x 10 - - - - - 330 8.0 x 8.0 x 10 10 x 10 x 10 - 10 x 10 x 14 - - - - 470 10 x 10 x 10 - 10 x 10 x 14 - - - - - 680 - 10 x 10 x 14 - - - - - - 1000 10 x 10 x 14 - - - - - - - 100 Table 1 TAPE AND REEL DIMENSIONS in millimeters AND PACKAGING QUANTITIES CASE CODE PITCH P1 TAPE WIDTH W TAPE THICKNESS T2 REEL DIAMETER PACKAGING QUANTITY PER REEL 0405 8 12 5.8 380 2000 0505 12 12 5.8 380 1000 0605 12 16 5.8 380 1000 0807 12 16 6.8 380 1000 0810 16 24 11.3 380 500 1010 16 24 11.3 380 500 1014 16 24 14.8 330 250 Note • Detailed tape dimensions see section “PACKAGING”. Revision: 15-Dec-2020 Document Number: 28388 2 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 153 CRV www.vishay.com Vishay BCcomponents 0.4 ± 0.2 L D W B H S 0.3 max. Fig. 2 - Dimensional outline Table 2 DIMENSIONS in millimeters AND MASS NOMINAL CASE SIZE LxWxH 4.0 x 4.0 x 5.3 5.0 x 5.0 x 5.3 6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5 8.0 x 8.0 x 10 10 x 10 x 10 10 x 10 x 14 CASE CODE Lmax. Wmax. Hmax. ØD Bmax. S 0405 0505 0605 0807 0810 1010 1014 4.5 5.5 6.8 8.6 8.6 10.6 10.6 4.5 5.5 6.8 8.6 8.6 10.6 10.6 5.5 5.5 5.5 6.8 10.5 10.5 14.3 4.0 5.0 6.3 8.0 8.0 10.0 10.0 0.8 0.8 0.8 0.8 1.1 1.1 1.2 1.0 1.4 2.0 2.3 3.1 4.7 4.5 MASS (g) ≈ 0.13 ≈ 0.20 ≈ 0.30 ≈ 0.50 ≈ 1.00 ≈ 1.30 ≈ 1.50 MOUNTING SOLDERING The capacitors are designed for automatic placement on to printed-circuit boards. Soldering conditions are defined by the curve, temperature versus time, where the temperature is that measured on the soldering pad and on top of the case during processing. Optimum dimensions of soldering pads depend amongst others on soldering method, mounting accuracy, print layout and / or adjacent components. For maximum conditions refer to Fig. 4. Maximum 2 runs with pause of minimum 30 min between. For recommended soldering pad dimensions, refer to Fig. 3 and Table 3. Any temperature versus time curve which does not exceed the specified maximum curves may be applied. AS A GENERAL PRINCIPLE, TEMPERATURE AND DURATION SHALL BE THE MINIMUM NECESSARY REQUIRED TO ENSURE GOOD SOLDERING CONNECTIONS. HOWEVER, THE SPECIFIED MAXIMUM CURVES SHOULD NEVER BE EXCEEDED. b a c a Fig. 3 - Recommended soldering pad dimensions Table 3 RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters CASE CODE 0405 0505 0605 0807 0810 1010 1014 Revision: 15-Dec-2020 a 2.6 3.0 3.5 4.0 3.5 4.0 4.3 b 1.6 1.6 1.6 1.6 2.5 2.5 2.5 c 1.0 1.4 1.9 2.1 3.0 4.0 4.0 Document Number: 28388 3 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 153 CRV www.vishay.com Vishay BCcomponents T (°C) TPeak t4 230 217 200 t3 t2 t1 150 time (s) Fig. 4 - Maximum temperature load during reflow soldering measured on capacitors soldering pad and top of the case REFLOW SOLDERING CONDITIONS CASE CODE 0405 TO 0605 CASE CODE 0807 TO 1010 CASE CODE 1014 ≤ 63 V CASE CODE 1014 100 V Max. time from 25 °C to Tpeak 240 s 240 s 300 s 270 s Max. ramp-up rate to 150 °C 3 K/s 3 K/s 3 K/s 3 K/s Max. time from 150 °C to 200 °C (t1) 120 s 120 s 150 s 120 s 0.5 K/s to 3 K/s 0.5 K/s to 3 K/s 0.5 K/s to 3 K/s 0.5 K/s to 3 K/s Max. time from 200 °C to 217 °C, (t2) 20 s 20 s 60 s 60 s Max. time above TLiquidus (217 °C), (t3) 60 s 60 s 90 s 60 s Max. time above 230 °C (t4) 30 s 20 s 40 s 30 s 250 °C 240 °C 250 °C 240 °C Max. time above Tpeak minus 5 °C 5s 5s 5s 10 s Max. ramp-down rate from TLiquidus 6 K/s 6 K/s 6 K/s 6 K/s PROFILE FEATURES Ramp up rate from 200 °C to Tpeak Peak temperature Tpeak Note • Temperature measuring point on top of the case and terminals max. 2 runs with pause of 30 min in between Revision: 15-Dec-2020 Document Number: 28388 4 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 153 CRV www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA SYMBOL Electrolytic capacitor 153 CRV series DESCRIPTION 100 μF / 25 V; ± 20 % CR Rated capacitance at 100 Hz or 120 Hz, tolerance ± 20 % IR Rated RMS ripple current at 100 Hz or 120 Hz, 105 °C IL2 Max. leakage current after 2 min at UR Ordering code: MAL215376101E3 tan δ Max. dissipation factor at 100 Hz or 120 Hz Former 12NC: 2222 153 76101 ESR Equivalent series resistance at 100 kHz Nominal case size: 8 mm x 8 mm x 10 mm; taped on reel Note • Unless otherwise specified, all electrical values in Table 4 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %. Table 4 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 6.3 10 16 25 35 50 63 100 CR (μF) NOMINAL CASE SIZE L x W x H (mm) IR 105 °C (mA) IL2 2 min (μA) tan δ 100 Hz ESR 100 kHz (Ω) ORDERING CODE MAL2153....... 22 47 100 330 470 1000 33 220 330 680 10 22 47 100 220 470 33 47 100 330 4.7 10 22 33 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 100 33 4.0 x 4.0 x 5.3 5.0 x 5.0 x 5.3 6.3 x 6.3 x 5.3 8.0 x 8.0 x 10 10 x 10 x 10 10 x 10 x 14 5.0 x 5.0 x 5.3 8.0 x 8.0 x 10 10 x 10 x 10 10 x 10 x 14 4.0 x 4.0 x 5.3 5.0 x 5.0 x 5.3 6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5 10 x 10 x 10 10 x 10 x 14 6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5 8.0 x 8.0 x 10 10 x 10 x 14 4.0 x 4.0 x 5.3 5.0 x 5.0 x 5.3 6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5 4.0 x 4.0 x 5.3 4.0 x 4.0 x 5.3 4.0 x 4.0 x 5.3 4.0 x 4.0 x 5.3 5.0 x 5.0 x 5.3 6.3 x 6.3 x 5.3 8.0 x 8.0 x 6.5 8.0 x 8.0 x 10 8.0 x 8.0 x 10 10 x 10 x 10 10 x 10 x 14 10 x 10 x 14 21 36 61 180 320 400 31 180 320 380 16 28 47 110 320 370 44 110 180 300 14 23 50 110 5 7 10 12 17 26 110 180 180 320 240 170 3.0 3.0 6.3 21 30 63 3.3 22 33 68 3.0 3.5 7.5 16 35 75 8.3 12 22 83 3.0 3.5 7.7 12 3.0 3.0 3.0 3.0 3.0 5.0 11 17 24 50 63 33 0.30 0.30 0.30 0.30 0.30 0.24 0.26 0.26 0.26 0.19 0.22 0.22 0.22 0.22 0.22 0.16 0.16 0.16 0.16 0.14 0.13 0.13 0.13 0.13 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.09 0.07 8 4 2 0.5 0.3 0.24 4 0.5 0.3 0.24 8 4 2.2 1.2 0.3 0.25 2.2 1.2 0.5 0.27 8 4 2.2 1.2 12 12 12 12 6 3 1.2 0.5 0.5 0.3 0.34 1.3  73229E3  73479E3  73101E3  73331E3  73471E3  73102E3  74339E3  74221E3  74331E3  74681E3  75109E3  75229E3  75479E3  75101E3  75221E3  75471E3  76339E3  76479E3  76101E3  76331E3  70478E3  70109E3  70229E3  70339E3  71477E3  71108E3  71228E3  71338E3  71478E3  71109E3  71229E3  71339E3  71479E3  71101E3  78101E3 79339E3 Revision: 15-Dec-2020 Document Number: 28388 5 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 153 CRV www.vishay.com Vishay BCcomponents ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Surge voltage IEC 60384-18, subclause 4.14 Us ≤ 1.15 x UR Reverse voltage IEC 60384-18, subclause 4.16 Urev ≤ 1 V After 2 min at UR IL2 ≤ 0.01 x CR x UR or 3 μA, whichever is greater Case codes 0405 to 0605 Typ. 10 nH Case codes 0807 to 1014 Typ. 15 nH Voltage Current Leakage current Inductance Equivalent series inductance (ESL) CAPACITANCE (C) EQUIVALENT SERIES RESISTANCE (ESR) 1.1 102 2 C C0 1 ESR (Ω) 1.0 10 1 0.9 2 1 0.8 2 3 1 Curve 1: 1 µF, 50 V Curve 2: 100 µF, 6.3 V Curve 1: 22 μF, 6.3 V Curve 2: 22 μF, 16 V Curve 3: 22 μF, 25 V 0.7 0.1 - 40 - 20 0 20 40 60 80 100 120 0.1 1 10 102 Tamb (°C) C0 = Capacitance at 20 °C 103 f (kHz) Fig. 5 - Typical multiplier of capacitance at 100 Hz or 120 Hz as a function of ambient temperature Fig. 6 - Typical ESR as a function of frequency at 20 °C DISSIPATION FACTOR (tan δ) IMPEDANCE (Z) 10 102 tan δ Curve 1: 1 µF, 50 V Curve 2: 100 µF, 6.3 V 2 Z (Ω) 1 10 1 1 0.1 2 3 1 0.01 Curve 1: 22 µF, 6.3 V Curve 2: 22 µF, 16 V Curve 3: 22 µF, 25 V 0.001 0.1 - 60 - 40 - 20 0 20 40 60 80 100 Tamb (°C) Fig. 7 - Typical dissipation factor (tan δ) at 100 Hz or 120 Hz as a function of ambient temperature Revision: 15-Dec-2020 120 0.1 1 10 102 103 f (kHz) Fig. 8 - Typical impedance as a function of frequency at 20 °C Document Number: 28388 6 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 153 CRV www.vishay.com Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE Table 5 ENDURANCE TEST DURATION AND USEFUL LIFE NOMINAL CASE SIZE ØDxL (mm) ENDURANCE AT 105 °C (h) USEFUL LIFE AT 105 °C (h) USEFUL LIFE AT 40 °C 1.3 x IR APPLIED (h) MULTIPLIER OF USEFUL LIFE CODE 4.0 x 4.0 x 5.3 1000 2000 200 000 CCC206r 5.0 x 5.0 x 5.3 1000 2000 200 000 CCC206r 6.3 x 6.3 x 5.3 1000 2000 200 000 CCC206r 8.0 x 8.0 x 6.5 2000 3000 300 000 CCC206r 8.0 x 8.0 x 10 2000 3000 300 000 CCC206r 10 x 10 x 10 2000 3000 300 000 CCC206r 10 x 10 x 14 2000 3000 300 000 CCC206 CCC206 3.8 IA IR 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.8 lifetime multiplier 2.6 0 1. 2.4 5 1. 0 2. 2.2 0 3. 0 4. 2.0 0 6. 1.6 0 10 Case codes 0807 to 1014: 3000 h (1) 0 15 0 20 Case codes 0405 to 0605: 2000 h 1.2 1.0 0.8 0.5 0.0 60 Useful life at 105 °C and IR applied: 30 1.4 For case codes 0405 to 1010 max. IA/IR = 2.4 (1) 12 at 105 °C 20 IR = Rated ripple current at 100 Hz or 120 Hz 0 8. 1.8 IA = Actual ripple current at 100 Hz or 120 Hz 40 50 60 70 80 90 100 110 Tamb (°C) Fig. 9 - Multiplier of useful life as a function of ambient temperature and ripple current load Revision: 15-Dec-2020 Document Number: 28388 7 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 153 CRV www.vishay.com Vishay BCcomponents Table 6 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) UR (V) 50 100 300 6.3 0.80 1.00 1.10 1.15 1.20 1.25 10 0.80 1.00 1.10 1.15 1.20 1.25 16 0.80 1.00 1.10 1.15 1.20 1.25 25 0.80 1.00 1.15 1.25 1.35 1.40 35 0.80 1.00 1.15 1.25 1.35 1.40 50 0.80 1.00 1.20 1.35 1.45 1.50 63 0.80 1.00 1.20 1.35 1.45 1.50 100 0.80 1.00 1.20 1.35 1.45 1.50 1000 3000 ≥ 10 000 IR MULTIPLIER Table 7 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE PROCEDURE (quick reference) REQUIREMENTS IEC 60384-18, subclause 4.3 Shall be performed prior to tests mentioned below; reflow soldering; for maximum temperature load refer to chapter “Mounting” ΔC/C: ± 10 % Mounting IEC 60384-18 / CECC 32300, subclause 4.15 Tamb = 105 °C; UR applied; 1000 h, case codes 0405 to 0605 2000 h, case codes 0807 to 1014 ΔC/C: ± 20 % Endurance tan δ ≤ spec. limit IL2 ≤ spec. limit tan δ ≤ 2 x spec. limit IL2 ≤ spec. limit ΔC/C: ± 50 % Useful life CECC 30301, subclause 1.8.1 Tamb = 105 °C; UR and IR applied; 2000 h, case codes 0405 to 0605 3000 h, case codes 0807 to 1014 IEC 60 384-18 / CECC 32 300, subclause 4.17 Tamb = 105 °C; no voltage applied; 1000 h After test: UR to be applied for 30 min, 24 h to 48 h before measurement tan δ ≤ 3 x spec. limit IL2 ≤ spec. limit no short or open circuit total failure percentage: ≤ 1 % Shelf life (storage at high temperature) For requirements see “Endurance test” above Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability. Revision: 15-Dec-2020 Document Number: 28388 8 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000