160 CLA
www.vishay.com
Vishay BCcomponents
Aluminum Electrolytic Capacitors
SMD (Chip), High Temperature, Low Impedance
FEATURES
• Useful life: up to 2000 h at 150 °C
• High reliability
• Low ESR
• Polarized aluminum electrolytic capacitors,
non-solid electrolyte, self healing
• SMD-version with base plate, lead (Pb)-free reflow
solderable
160 CLA
150 °C
Higher temperature
140 CRH
125 °C
Lower Z
Higher IR
146 CTI
125 °C
Lower Z
• Charge and discharge proof, no peak current limitation
• High temperature reflow soldering according to JEDEC®
J-STD-020
• High temperature proof
• Vibration proof, 4-pin version and 6-pin version
• AEC-Q200 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
150 CRZ
105 °C
Fig. 1
APPLICATIONS
• SMD technology, for high temperature reflow soldering
QUICK REFERENCE DATA
DESCRIPTION
VALUE
Nominal case sizes
(L x W x H in mm)
12.5 x 12.5 x 13
to 18 x 18 x 21
Rated capacitance range, CR
47 μF to 3300 μF
Tolerance on CR
Rated voltage range, UR
± 20 %
16 V to 80 V
Category temperature range
-55 °C to +150 °C
Endurance test at 150 °C
1000 h to 1500 h
Useful life at 150 °C
1000 h to 2000 h
Useful life at 40 °C
1.8 x lR applied
300 000 h to 400 000 h
Shelf life at 0 V, 150 °C
Based on sectional
specification
Climatic category IEC 60068
Revision: 14-Dec-16
1000 h
IEC 60384-18 / CECC 32300
55 / 150 / 56
• High temperature environment, high peak load
• Automotive, industrial
• Smoothing, filtering, buffering
MARKING
• Rated capacitance (in μF)
• Rated voltage (in V)
• Date code, in accordance with IEC 60062
• Black mark or “-” sign indicating the cathode (the anode is
identified by bevelled edges)
• Code indicating group number (A)
PACKAGING
Supplied in blister tape on reel
Document Number: 28405
1
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
160 CLA
www.vishay.com
Vishay BCcomponents
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm)
UR (V)
CR
(μF)
16
25
35
50
63
47
12.5 x 12.5 x 13
-
68
12.5 x 12.5 x 13
12.5 x 12.5 x 13
100
12.5 x 12.5 x 13
12.5 x 12.5 x 13
12.5 x 12.5 x 16
150
12.5 x 12.5 x 13
12.5 x 12.5 x 16
16 x 16 x 16
220
12.5 x 12.5 x 13
12.5 x 12.5 x 16
16 x 16 x 16
18 x 18 x 16
18 x 18 x 21
80
330
12.5 x 12.5 x 13
12.5 x 12.5 x 13
16 x 16 x 16
18 x 18 x 16
470
12.5 x 12.5 x 13
12.5 x 12.5 x 13
16 x 16 x 16
18 x 18 x 16
16 x 16 x 21
-
680
12.5 x 12.5 x 13
16 x 16 x 16
18 x 18 x 16
16 x 16 x 21
18 x 18 x 21
-
1000
16 x 16 x 16
18 x 18 x 16
16 x 16 x 21
18 x 18 x 21
-
-
1500
18 x 18 x 16
16 x 16 x 21
18 x 18 x 21
-
-
-
2200
16 x 16 x 21
18 x 18 x 21
-
-
-
-
2700
18 x 18 x 21
-
-
-
-
-
3300
18 x 18 x 21
-
-
-
-
-
6-pin:
≥ Ø 16 mm
D
WMAX.
B
L1MAX.
D
WMAX.
B
LMAX.
S
HMAX.
MAX. 0.3
min. 0.4/max. 1.0 (2 x)
HMAX.
MAX. 0.3
35V
1000u
3R-H
25V
2200u
L4-H
min. 0.4/max. 1.0 (2 x)
4-pin:
Ø 12.5 mm
L1MAX. S
LMAX.
Fig. 2 - Dimensional outline
Table 1
DIMENSIONS in millimeters AND MASS
NOMINAL
CASE SIZE
LxWxH
CASE
CODE
LMAX.
WMAX.
HMAX.
ØD
BMAX.
S
L1MAX.
MASS
(g)
2.9
12.5 x 12.5 x 13
1213
12.9
12.9
14.0
12.5
1.3
3.6
14.9
12.5 x 12.5 x 16
1216
12.9
12.9
16.5
12.5
1.3
3.6
14.9
3.2
16 x 16 x 16
1616
16.6
16.6
17.5
16.0
1.3
6.5
18.6
5.8
16 x 16 x 21
1621
16.6
16.6
22.0
16.0
1.3
6.5
18.6
7.1
18 x 18 x 16
1816
19.0
19.0
17.5
18.0
1.3
6.5
21.0
8.0
18 x 18 x 21
1821
19.0
19.0
22.0
18.0
1.3
6.5
21.0
9.3
Revision: 14-Dec-16
Document Number: 28405
2
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
160 CLA
www.vishay.com
Vishay BCcomponents
Table 2
TAPE AND REEL DIMENSIONS in millimeters, PACKAGING QUANTITIES
NOMINAL
CASE SIZE
LxWxH
CASE
CODE
PITCH
P1
TAPE WIDTH
W
TAPE
THICKNESS
T2
REEL DIAMETER
PACKAGING
QUANTITY
PER REEL
12.5 x 12.5 x 13
1213
20
24
16.2
380
250
12.5 x 12.5 x 16
1216
24
32
18.5
380
200
16 x 16 x 16
1616
28
44
18.9
380
150
16 x 16 x 21
1621
28
44
23.4
380
100
18 x 18 x 16
1816
32
44
18.9
380
125
18 x 18 x 21
1821
32
44
23.4
380
100
Note
• Detailed tape dimensions see section “PACKAGING”
MOUNTING
SOLDERING
The capacitors are designed for automatic placement on to
printed-circuit boards.
Soldering conditions are defined by the curve, temperature
versus time, where the temperature is that measured on the
component during processing.
Optimum dimensions of soldering pads depend amongst
others on soldering method, mounting accuracy, print
layout and / or adjacent components.
For maximum conditions refer to Fig. 4.
Any temperature versus time curve which does not exceed
the specified maximum curves may be applied.
For recommended soldering pad dimensions, refer to Fig. 3
and Table 3.
As a general principle, temperature and duration shall be the
minimum necessary required to ensure good soldering
connections. However, the specified maximum curves
should never be exceeded.
e
a
c
a
d
f
b
b
d
a
c
a
Case size Ø D ≥ 16 mm
Case size Ø D = 12.5 mm
Fig. 3 - Recommended soldering pad dimensions
Table 3
RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters
CASE CODE
a
b
c
d
e
f
1213
6.3
2.5
4.0
4.2
5.0
5.6
1216
6.3
2.5
4.0
4.2
5.0
5.6
1616
7.8
9.6
4.7
-
-
-
1621
7.8
9.6
4.7
-
-
-
1816
8.8
9.6
4.7
-
-
-
1821
8.8
9.6
4.7
-
-
-
Revision: 14-Dec-16
Document Number: 28405
3
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
160 CLA
www.vishay.com
Vishay BCcomponents
ADVANCED SOLDERING PROFILE FOR LEAD (Pb)-FREE REFLOW PROCESS
ACCORDING TO JEDEC J-STD-020
T (°C)
TPeak
230
217
t4
t3
200
190
t2
150
t1
25
time (s)
Fig. 4 - Maximum temperature load during reflow soldering
Table 4
REFLOW SOLDERING CONDITIONS for MAL216099xxxE3
CASE CODE
1213 TO 1216
CASE CODE
1616 TO 1821
Max. time from 25 °C to TPeak
300 s
300 s
Max. ramp-up rate to 150 °C
3 K/s
3 K/s
Max. time from 150 °C to 200 °C (t1)
150 s
150 s
Max. time from 190 °C to 200 °C (t2)
110 s
110 s
0.5 K/s to 3 K/s
0.5 K/s to 3 K/s
Max. time above TLiquidus (217 °C) (t3)
90 s
90 s
Max. time above 230 °C (t4)
65 s
60 s
250 °C
245 °C
30 s
30 s
3 K/s to 6 K/s
3 K/s to 6 K/s
PROFILE FEATURES
Ramp up rate from 200 °C to TPeak
Peak temperature TPeak
Max. time above TPeak minus 5 °C
Ramp-down rate from TLiquidus
Notes
• Temperature measuring point on top of the case and on terminals.
• Max. 2 runs with pause of min. 30 min in between.
Revision: 14-Dec-16
Document Number: 28405
4
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
160 CLA
www.vishay.com
Vishay BCcomponents
ORDERING EXAMPLE
ELECTRICAL DATA
Electrolytic capacitor 160 CLA series
SYMBOL
DESCRIPTION
CR
Rated capacitance at 100 Hz, tolerance ± 20 %
IR
Rated RMS ripple current at 100 kHz, 150 °C
IL2
Max. leakage current after 2 min at UR
tan
Z
220 μF / 50 V; ± 20 %
Nominal case size: 12.5 mm x 12.5 mm x 16 mm;
taped on reel
Ordering code: MAL216099103E3
Max. dissipation factor at 100 Hz
Max. impedance at 100 kHz
Note
• Unless otherwise specified, all electrical values in Table 5 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %
Table 5
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
16
25
35
50
63
80
CR
(μF)
NOMINAL
CASE SIZE
LxWxH
(mm)
IR
150 °C
100 kHz
(mA)
IL2
2 min
(μA)
tan
100 Hz
Z
100 kHz
20 °C
()
Z
100 kHz
-40 °C
()
LIFE
CODE (1)
ORDERING
CODE
MAL2160...
470
680
1000
1500
2200
2700
3300
330
470
680
1000
1500
2200
220
330
470
680
1000
1500
100
150
220
330
470
680
1000
47
68
100
150
220
330
470
680
68
100
150
220
330
12.5 x 12.5 x 13
12.5 x 12.5 x 13
16 x 16 x 16
18 x 18 x 16
16 x 16 x 21
18 x 18 x 21
18 x 18 x 21
12.5 x 12.5 x 13
12.5 x 12.5 x 13
16 x 16 x 16
18 x 18 x 16
16 x 16 x 21
18 x 18 x 21
12.5 x 12.5 x 13
12.5 x 12.5 x 13
16 x 16 x 16
18 x 18 x 16
16 x 16 x 21
18 x 18 x 21
12.5 x 12.5 x 13
12.5 x 12.5 x 13
12.5 x 12.5 x 16
16 x 16 x 16
18 x 18 x 16
16 x 16 x 21
18 x 18 x 21
12.5 x 12.5 x 13
12.5 x 12.5 x 13
12.5 x 12.5 x 13
12.5 x 12.5 x 16
16 x 16 x 16
18 x 18 x 16
16 x 16 x 21
18 x 18 x 21
12.5 x 12.5 x 13
12.5 x 12.5 x 16
16 x 16 x 16
18 x 18 x 16
18 x 18 x 21
750
800
850
900
1100
1350
1400
650
700
800
830
1050
1350
550
650
800
830
1000
1350
420
450
550
700
720
800
1100
300
320
320
400
500
520
600
700
270
320
430
430
520
75
109
160
240
352
432
528
83
118
170
250
375
550
77
116
165
238
350
525
50
75
110
165
235
340
500
30
43
63
95
139
208
296
428
54
80
120
176
264
0.16
0.16
0.16
0.16
0.18
0.18
0.20
0.14
0.14
0.14
0.14
0.14
0.16
0.12
0.12
0.12
0.12
0.12
0.12
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.12
0.12
0.12
0.12
0.12
0.080
0.080
0.050
0.050
0.035
0.035
0.035
0.080
0.080
0.050
0.050
0.035
0.035
0.080
0.080
0.050
0.050
0.035
0.035
0.130
0.120
0.085
0.072
0.070
0.052
0.049
0.240
0.240
0.240
0.160
0.100
0.095
0.075
0.072
0.780
0.650
0.390
0.390
0.300
0.70
0.70
0.45
0.45
0.32
0.32
0.32
0.70
0.70
0.45
0.45
0.32
0.32
0.70
0.70
0.45
0.45
0.32
0.32
1.20
1.10
0.76
0.65
0.63
0.47
0.44
2.16
2.16
2.16
1.44
0.90
0.86
0.68
0.65
6.24
5.20
3.12
3.12
2.40
L2
L2
L3
L3
L5
L5
L5
L2
L2
L3
L3
L5
L5
L2
L2
L3
L3
L5
L5
L2
L2
L2
L3
L3
L5
L5
L1
L1
L1
L2
L3
L3
L5
L5
L1
L1
L3
L3
L4
99501E3
99502E3
99503E3
99504E3
99505E3
99506E3
99507E3
99601E3
99602E3
99603E3
99604E3
99605E3
99606E3
99001E3
99002E3
99003E3
99004E3
99005E3
99006E3
99101E3
99102E3
99103E3
99104E3
99105E3
99106E3
99107E3
99801E3
99802E3
99803E3
99804E3
99805E3
99806E3
99807E3
99808E3
99701E3
99702E3
99703E3
99704E3
99705E3
Note
(1) Determines the applicable row in the table “Endurance Test Duration and Useful Life”
Revision: 14-Dec-16
Document Number: 28405
5
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
160 CLA
www.vishay.com
Vishay BCcomponents
Table 6
ADDITIONAL ELECTRICAL DATA
PARAMETER
CONDITIONS
VALUE
Voltage
IEC 60384-18, subclause 4.14
Us 1.15 x UR
IEC 60384-18, subclause 4.16; TA 150 °C
Urev 1 V
After 2 min at UR
IL2 0.01 x CR x UR
Ø D 12.5 mm
Typ. 11 nH
Calculated from tan max. and CR (see Table 5)
ESR = tan /2fCR
Surge voltage for short periods
Reverse voltage for short periods
Current
Leakage current
Inductance
Equivalent series inductance (ESL)
Resistance
Equivalent series resistance (ESR) at 100 Hz
CAPACITANCE (C)
1.20
1.10
C/C0
C/C0
1.00
1.10
0.90
1.00
0.80
0.70
1
0.90
0.80
2
3
Curve 1: 2700 μF
Curve 2: 1000 μF
Curve 3: 100 μF
0.60
2
0.50
- 60 - 40 - 20
0
20
40
60
80
100 120 140 160
C0 = Capacitance at 20 °C, 100 Hz
Tamb (°C)
10
102
103
104
f (Hz)
C0 = Typical capacitance C at 20 °C, 100 Hz
Fig. 5 - Typical multiplier of capacitance
as a function of ambient temperature
105
Fig. 6 - Typical multiplier of capacitance
as a function of frequency
DISSIPATION FACTOR (tan )
103
8
tan/tan0
tan/tan0
6
102
4
10
2
1
0
0.1
- 60 - 40 - 20
0
20
40
tan δ = Typical tan δ at 20 °C, 100 Hz
60
80
100 120 140 160
Tamb (°C)
Fig. 7 - Typical multiplier of dissipation factor (tan )
as a function of ambient temperature
Revision: 14-Dec-16
10
102
tan δ = Typical tan δ at 20 °C, 100 Hz
103
104
105
f (Hz)
Fig. 8 - Typical multiplier of dissipation factor (tan )
as a function of frequency
Document Number: 28405
6
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
160 CLA
www.vishay.com
Vishay BCcomponents
EQUIVALENT SERIES RESISTANCE (ESR)
10
ESR/ESR0
1
0.1
10
10
2
10
3
10
ESR0 = Typical ESR at 20 °C, 100 Hz
4
f (Hz) 10
Tamb = 20 °C
5
Fig. 9 - Typical multiplier of ESR as a function of frequency
IMPEDANCE (Z)
102
Z/Z0
10
1
0.1
- 60 - 40 - 20
0
20
40
60
80
100 120 140 160
T (°C)
Z0 = Typical impedance Z at 20 °C, 100 kHz
Fig. 10 - Typical multiplier of impedance
as a function of temperature
102
103
Curve 1: 330-25-1213
Curve 2: 470-25-1213
Curve 3: 680-25-1616
Curve 4: 1000-25-1816
Curve 5. 1500-25-1621
Curve 6: 2200-25-1821
Z (Ω)
1
2
3
4
5
6
10
1
Curve 1: 100-50-1213
Curve 2: 150-50-1213
Curve 3: 220-50-1216
Curve 4: 330-50-1616
Curve 5. 470-50-1816
Curve 6: 680-50-1621
Curve 7: 1000-50-1821
Z (Ω)
102
1
2
3
4
5
6
7
10
1
0.1
0.1
0.01
0.01
10
102
103
104
Tamb = 20 °C
105
f (Hz)
Fig. 11 - Typical impedance as a function of frequency
Revision: 14-Dec-16
10
102
103
104
Tamb = 20 °C
105
f (Hz)
Fig. 12 - Typical impedance as a function of frequency
Document Number: 28405
7
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
160 CLA
www.vishay.com
Vishay BCcomponents
RIPPLE CURRENT AND USEFUL LIFE
Table 7
ENDURANCE TEST DURATION AND USEFUL LIFE
LIFE CODE
ENDURANCE AT 150 °C
(h)
USEFUL LIFE AT 150 °C
(h)
USEFUL LIFE AT 40 °C
1.8 x IR APPLIED
(h)
L1
1000
1000
300 000
L2
1000
1250
325 000
L3
1000
1500
350 000
L4
1500
1500
350 000
L5
1500
2000
400 000
Note
• Multiplier of useful life code: MBC245
MBC245
IA 4.8
IR
4.5
4.3
4.2
4.1
4.0
3.9
3.8
3.7
3.6
3.5
3.4
3.3
Lifetime multiplier
0
1.
3.2
3.1
3.0
5
1.
0
2.
2.
5
2.8
0
4.
0
6.
0
8.
2.6
12
2.4
20
2.2
30
2.0
50
0
20
40
0
(1)
0
60
1.6
1.4
1.2
1.0
0.8
0.5
0.0
0
10
1.8
IA = Actual ripple current at 100 kHz
IR = Rated ripple current at 100 kHz, 150 °C
(1)
Useful life at 150 °C and IR applied;
see Table 7
40
50
60
70
80
90
100
110
120
130
140
150
160
Tamb (°C)
Fig. 13 - Multiplier of useful life as a function of ambient temperature and ripple current load
Revision: 14-Dec-16
Document Number: 28405
8
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
160 CLA
www.vishay.com
Vishay BCcomponents
Table 8
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQUENCY (Hz)
50
100
300
1000
3000
10 000
30 000
100 000
0.95
0.97
1.00
IR MULTIPLIER
0.40
0.60
0.75
0.80
0.90
Table 9
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST
REFERENCE
PROCEDURE
(quick reference)
REQUIREMENTS
Mounting
IEC 60384-18,
subclause 4.3
Shall be performed prior to tests mentioned below;
reflow soldering;
for maximum temperature load
refer to chapter “Mounting”
C/C: ± 5 %
tan spec. limit
IL2 spec. limit
Endurance
IEC 60384-18 /
CECC 32300,
subclause 4.15
Tamb = 150 °C; UR applied;
for test duration see Table 7
C/C: ± 20 %
tan 2 x spec. limit
IL2 spec. limit
Useful life
CECC 30301,
subclause 1.8.1
Tamb = 150 °C; UR and IR applied;
for test duration see Table 7
C/C: ± 30 %
tan 3 x spec. limit
IL2 spec. limit
no short or open circuit
total failure percentage: 1 %
Shelf life
(storage at high
temperature)
IEC 60384-18 /
CECC 32300,
subclause 4.17
Tamb = 150 °C; no voltage applied;
1000 h
After test: UR to be applied for 30 min,
24 h to 48 h before measurement
For requirements
see “Endurance test” above
Reverse voltage
IEC 60384-18 /
CECC 32300,
subclause 4.16
Tamb = 150 °C:
125 h at U = -0.5 V,
followed by 125 h at UR
C/C: ± 15 %
tan 1.5 x spec. limit
IL2 spec. limit
Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the
lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.
Revision: 14-Dec-16
Document Number: 28405
9
For technical questions, contact: aluminumcaps1@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2023
1
Document Number: 91000
工商网监
湘ICP备2023018690号
