MAL218297005E3

182 CPHZ www.vishay.com Vishay BCcomponents Hybrid Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES • Long useful life: up to 10 000 h at 105 °C • Very low ESR and high ripple current • High voltages up to 80 V • AEC-Q200 qualified products on request • SMD-version with base plate, lead (Pb)­free reflow solderable higher 182 CPHZ 105 °C temperature • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 183 CPHT 125 °C APPLICATIONS Fig. 1 • Automotive electronics • Industrial and professional applications QUICK REFERENCE DATA • Telecommunications and IT DESCRIPTION VALUE Nominal case sizes  (L x W x H in mm) 5.0 x 5.0 x 5.8 to 10.0 x 10.0 x 10.5 Rated capacitance range, CR 10 μF to 330 μF Tolerance on CR • Rated voltage (in V) 25 V to 80 V Category temperature range -55 °C to +105 °C Endurance test at 105 °C 10 000 h Useful life at 105 °C 10 000 h Shelf life at 0 V, 105 °C • Date code, in accordance with IEC 60062 • Black mark or “-” sign indicating the cathode (the anode is identified by beveled edges) 1000 h Based on sectional specification MARKING • Rated capacitance (in μF) ± 20 % Rated voltage range, UR • Portable and mobile equipment • Code indicating group number (82) IEC 60384-25 / CECC 32300 PACKAGING Climatic category IEC 60068 55 / 105 / 56 Supplied in blister tape on reel SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm) CR (μF) UR (V) 25 35 50 63 80 10   5.0 x 5.0 x 5.8 6.3 x 6.3 x 5.8 - 22  5.0 x 5.0 x 5.8 6.3 x 6.3 x 5.8 6.3 x 6.3 x 7.7 8.0 x 8.0 x 10.5 27  6.3 x 6.3 x 5.8 - - - 33 5.0 x 5.0 x 5.8  6.3 x 6.3 x 7.7 8.0 x 8.0 x 10.5 10.0 x 10.0 x 10.5 47  6.3 x 6.3 x 5.8 - - - 56 6.3 x 6.3 x 5.8   10.0 x 10.0 x 10.5 - 68  6.3 x 6.3 x 7.7 8.0 x 8.0 x 10.5 - - 100 6.3 x 6.3 x 7.7  10.0 x 10.0 x 10.5 - - 150  8.0 x 8.0 x 10.5 - - - 220 8.0 x 8.0 x 10.5 - - - - 270  10.0 x 10.0 x 10.5 - - - 330 10.0 x 10.0 x 10.5 - - - - Revision: 22-Sep-17 Document Number: 28433 1 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 182 CPHZ www.vishay.com 2-pin: VISHAY 39 63V 82H5 Negative polarity min. 0.4 / max. 1.0 (2 x) Vishay BCcomponents WMAX. HMAX. MAX. 0.3 B D L1MAX. LMAX. S Fig. 2 - Dimensional outline Table 1 DIMENSIONS in millimeters AND MASS NOMINAL CASE SIZE LxWxH CASE CODE LMAX. WMAX. HMAX. ØD BMAX. S L1MAX. MASS (g) 5.0 x 5.0 x 5.8 0506 5.5 5.5 6.1 5.0 0.8 1.4 6.1 0.2 6.3 x 6.3 x 5.8 0606 6.7 6.7 6.1 6.3 0.8 2.2 7.4 0.3 6.3 x 6.3 x 7.7 0608 6.7 6.7 8.0 6.3 0.8 2.2 7.4 0.4 8.0 x 8.0 x 10.5 0810 8.5 8.5 10.8 8.0 1.1 3.1 9.2 0.9 10.0 x 10.0 x 10.5 1010 10.5 10.5 10.8 10.0 1.1 4.5 11.2 1.2 Table 2 TAPE AND REEL DIMENSIONS in millimeters, PACKAGING QUANTITIES NOMINAL CASE SIZE LxWxH CASE CODE PITCH P1 TAPE WIDTH W TAPE THICKNESS T2 REEL DIAMETER PACKAGING QUANTITY PER REEL 5.0 x 5.0 x 5.8 0506 12 12 6.1 380 1000 6.3 x 6.3 x 5.8 0606 12 16 5.7 380 1000 6.3 x 6.3 x 7.7 0608 12 16 8.0 380 900 8.0 x 8.0 x 10.5 0810 16 24 11.0 380 500 10.0 x 10.0 x 10.5 1010 16 24 11.0 380 500 MOUNTING SOLDERING The capacitors are designed for automatic placement on to printed-circuit boards. Soldering conditions are defined by the curve, temperature versus time, where the temperature is that measured on the component during processing. Optimum dimensions of soldering pads depend amongst others on soldering method, mounting accuracy, print layout and / or adjacent components. For recommended soldering pad dimensions, refer to Fig. 3 and Table 3. Revision: 22-Sep-17 For maximum conditions refer to Fig. 4. Any temperature versus time curve which does not exceed the specified maximum curves may be applied. As a general principle, temperature and duration shall be the minimum necessary required to ensure good soldering connections. However, the specified maximum curves should never be exceeded. Document Number: 28433 2 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 182 CPHZ www.vishay.com Vishay BCcomponents b a c a Fig. 3 - Recommended soldering pad dimensions Table 3 RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters NOMINAL CASE SIZE LxWxH CASE CODE a b c 5.0 x 5.0 x 5.8 0506 3.0 1.6 1.4 6.3 x 6.3 x 5.8 0606 3.5 1.6 2.1 6.3 x 6.3 x 7.7 0608 3.5 1.6 2.1 8.0 x 8.0 x 10.5 0810 4.2 1.9 2.8 10.0 x 10.0 x 10.5 1010 4.4 1.9 4.3 SOLDERING PROFILE FOR LEAD (Pb)-FREE REFLOW PROCESS (°C) Peak temperature Temperature of the Surface / Terminal Tpeak 230 t3 200 t2 180 Preheat t1 Time (s) Fig. 4 - Maximum temperature load during reflow soldering Table 4 REFLOW SOLDERING CONDITIONS for MAL2182xxxxxE3 PROFILE FEATURES 25 V 35 V TO 80 V Maximum time between 150 °C to 180 °C (t1) 120 s 120 s Maximum time above 200 °C (t2) 80 s 70 s Maximum time above 230 °C (t3) 50 s 30 s Peak temperature TPeak 240 °C 240 °C Maximum reflow cycles 2 1 Note • Temperature measuring point on top of the case and on terminals Revision: 22-Sep-17 Document Number: 28433 3 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 182 CPHZ www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA SYMBOL Hybrid conductive polymer 182 CPHZ series DESCRIPTION CR Rated capacitance at 120 Hz, tolerance ± 20 % IR 105 °C Rated RMS ripple current at 100 kHz IL2 Max. leakage current after 2 min at UR tan  Max. dissipation factor at 120 Hz ESR Max. ESR at 100 kHz 100 μF / 25 V; ± 20 % Nominal case size: 6.3 mm x 6.3 mm x 7.7 mm; taped on reel Ordering code: MAL218297603E3 Note • Unless otherwise specified, all electrical values in Table 5 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 % Table 5 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 25 35 50 63 80 CR (μF) NOMINAL CASE SIZE LxWxH (mm) IR 105 °C 100 kHz (mA) IL2 2 min (μA) tan  120 Hz ESR 100 kHz 20 °C (m) ORDERING CODE MAL2182... 33 5.0 x 5.0 x 5.8 900 8.3 0.14 80 97601E3 97602E3 56 6.3 x 6.3 x 5.8 1300 14 0.14 50 100 6.3 x 6.3 x 7.7 2000 25 0.14 30 97603E3 220 8.0 x 8.0 x 10.5 2300 55 0.14 27 97604E3 330 10.0 x 10.0 x 10.5 2500 82.5 0.14 20 97605E3 22 5.0 x 5.0 x 5.8 900 7.7 0.12 100 97001E3 27 6.3 x 6.3 x 5.8 1300 9.5 0.12 60 97002E3 47 6.3 x 6.3 x 5.8 1300 16.5 0.12 60 97003E3 68 6.3 x 6.3 x 7.7 2000 23.8 0.12 35 97004E3 150 8.0 x 8.0 x 10.5 2300 52.5 0.12 27 97005E3 270 10.0 x 10.0 x 10.5 2500 94.5 0.12 20 97006E3 10 5.0 x 5.0 x 5.8 750 5 0.1 120 97101E3 22 6.3 x 6.3 x 5.8 1100 11 0.1 80 97102E3 33 6.3 x 6.3 x 7.7 1600 16.5 0.1 40 97103E3 68 8.0 x 8.0 x 10.5 1800 34 0.1 30 97104E3 100 10.0 x 10.0 x 10.5 2000 50 0.1 28 97105E3 10 6.3 x 6.3 x 5.8 1000 6.3 0.08 120 97801E3 22 6.3 x 6.3 x 7.7 1500 13.9 0.08 80 97802E3 33 8.0 x 8.0 x 10.5 1700 20.8 0.08 40 97803E3 56 10.0 x 10.0 x 10.5 1800 35.3 0.08 30 97804E3 22 8.0 x 8.0 x 10.5 1550 17.6 0.08 45 97701E3 33 10.0 x 10.0 x 10.5 1700 26.4 0.08 36 97702E3 Table 6 ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE IEC 60384-25, subclause 4.14 Us  1.15 x UR Voltage Surge voltage for short periods Revision: 22-Sep-17 Document Number: 28433 4 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 182 CPHZ www.vishay.com Vishay BCcomponents USEFUL LIFE AND ENDURANCE Table 7 ENDURANCE TEST AND USEFUL LIFE SERIES CASE CODE USEFUL LIFE AT 105 °C (h) (1) ENDURANCE AT 105 °C (h) ENDURANCE AT 95 °C (h) ENDURANCE AT 85 °C (h) ENDURANCE AT 75 °C (h) ENDURANCE AT 65 °C (h) 182 CPHZ 0506 to 1010 10 000 10 000 20 000 40 000 80 000 160 000 Note (1) Identical with endurance for this series Endurance can be calculated by formula below: L = L Tmax. x 2 T max. - T a ------------------------10 L: estimated lifetime (h) LTmax.: base lifetime specified at maximum operating temperature with applied DC voltage (h) Tmax.: rated maximum operating temperature (°C) Ta: actual ambient temperature (°C) Table 8 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) 120 1000 0.1 0.3 10 000  100 000 0.6 1 IR MULTIPLIER Table 9 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE PROCEDURE (quick reference) REQUIREMENTS C/C: ± 5 % tan   spec. limit IL2  spec. limit Mounting IEC 60384-25, subclause 4.3 Shall be performed prior to tests mentioned below; reflow soldering; for maximum temperature load refer to chapter “Mounting” Endurance IEC 60384-25 / CECC 32300, subclause 4.15 Tamb = 105 °C; UR applied; for test duration see Table 7 Useful life CECC 30301, subclause 1.8.1 Tamb = 105 °C; UR and IR applied; for test duration see Table 7 C/C: ± 30 % tan   2 x spec. limit IL2  spec. limit ESR  2 x spec. limit Shelf life (storage at high temperature) IEC 60384-25 / CECC 32300, subclause 4.16 Tamb = 105 °C; no voltage applied; 1000 h after test: UR to be applied for 30 min, 24 h to 48 h before measurement For requirements see “Endurance test” above C/C: ± 30 % tan   2 x spec. limit IL2  spec. limit ESR  2 x spec. limit        Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability. Revision: 22-Sep-17 Document Number: 28433 5 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000