MAL218397603E3

183 CPHT www.vishay.com Vishay BCcomponents Hybrid Conductive Polymer Aluminum Capacitors SMD (Chip), Low Impedance FEATURES • Long useful life: up to 4000 h at 125 °C • Very low ESR and high ripple current • High voltages up to 80 V • AEC-Q200 qualified products on request • SMD-version with base plate, lead (Pb)­free reflow solderable higher 182 CPHZ 105 °C temperature • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 183 CPHT 125 °C APPLICATIONS Fig. 1 • Automotive electronics • Industrial and professional applications QUICK REFERENCE DATA • Telecommunications and IT DESCRIPTION VALUE Nominal case sizes  (L x W x H in mm) 5.0 x 5.0 x 5.8 to 10.0 x 10.0 x 10.5 Rated capacitance range, CR 10 μF to 330 μF Tolerance on CR • Rated voltage (in V) 25 V to 80 V Category temperature range -55 °C to +125 °C Endurance test at 125 °C 4000 h Useful life at 125 °C 4000 h Shelf life at 0 V, 125 °C 1000 h Based on sectional specification MARKING • Rated capacitance (in μF) ± 20 % Rated voltage range, UR • Portable and mobile equipment • Date code, in accordance with IEC 60062 • Black mark or “-” sign indicating the cathode (the anode is identified by beveled edges) • Code indicating group number (83) IEC 60384-25 / CECC 32300 PACKAGING Climatic category IEC 60068 55 / 125 / 56 Supplied in blister tape on reel SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm) CR (μF) UR (V) 25 35 50 63 80 10   5.0 x 5.0 x 5.8 6.3 x 6.3 x 5.8 - 22  5.0 x 5.0 x 5.8 6.3 x 6.3 x 5.8 6.3 x 6.3 x 7.7 8.0 x 8.0 x 10.5 33 5.0 x 5.0 x 5.8  6.3 x 6.3 x 7.7 8.0 x 8.0 x 10.5 10.0 x 10.0 x 10.5 47  6.3 x 6.3 x 5.8   10.0 x 10.0 x 10.5 - 56 6.3 x 6.3 x 5.8   10.0 x 10.0 x 10.5 68  6.3 x 6.3 x 7.7 8.0 x 8.0 x 10.5 10.0 x 10.0 x 10.5 - 100 6.3 x 6.3 x 7.7  10.0 x 10.0 x 10.5 - - 120   10.0 x 10.0 x 10.5 - - 150  8.0 x 8.0 x 10.5 - - - 220 8.0 x 8.0 x 10.5 - - - - 270  10.0 x 10.0 x 10.5 - - - 330 10.0 x 10.0 x 10.5 - - - - Revision: 22-Sep-17 Document Number: 28434 1 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 183 CPHT www.vishay.com 2-pin: VISHAY 39 63V 83 H5 Negative polarity min. 0.4 / max. 1.0 (2 x) Vishay BCcomponents WMAX. HMAX. MAX. 0.3 B D L1MAX. LMAX. S Fig. 2 - Dimensional outline Table 1 DIMENSIONS in millimeters AND MASS NOMINAL CASE SIZE LxWxH CASE CODE LMAX. WMAX. HMAX. ØD BMAX. S L1MAX. MASS (g) 5.0 x 5.0 x 5.8 0506 5.5 5.5 6.1 5.0 0.8 1.4 6.1 0.2 6.3 x 6.3 x 5.8 0606 6.7 6.7 6.1 6.3 0.8 2.2 7.4 0.3 6.3 x 6.3 x 7.7 0608 6.7 6.7 8.0 6.3 0.8 2.2 7.4 0.4 8.0 x 8.0 x 10.5 0810 8.5 8.5 10.8 8.0 1.1 3.1 9.2 0.9 10.0 x 10.0 x 10.5 1010 10.5 10.5 10.8 10.0 1.1 4.5 11.2 1.2 Table 2 TAPE AND REEL DIMENSIONS in millimeters, PACKAGING QUANTITIES NOMINAL CASE SIZE LxWxH CASE CODE PITCH P1 TAPE WIDTH W TAPE THICKNESS T2 REEL DIAMETER PACKAGING QUANTITY PER REEL 5.0 x 5.0 x 5.8 0506 12 12 6.1 380 1000 6.3 x 6.3 x 5.8 0606 12 16 5.7 380 1000 6.3 x 6.3 x 7.7 0608 12 16 8.0 380 900 8.0 x 8.0 x 10.5 0810 16 24 11.0 380 500 10.0 x 10.0 x 10.5 1010 16 24 11.0 380 500 MOUNTING SOLDERING The capacitors are designed for automatic placement on to printed-circuit boards. Soldering conditions are defined by the curve, temperature versus time, where the temperature is that measured on the component during processing. Optimum dimensions of soldering pads depend amongst others on soldering method, mounting accuracy, print layout and / or adjacent components. For recommended soldering pad dimensions, refer to Fig. 3 and Table 3. Revision: 22-Sep-17 For maximum conditions refer to Fig. 4. Any temperature versus time curve which does not exceed the specified maximum curves may be applied. As a general principle, temperature and duration shall be the minimum necessary required to ensure good soldering connections. However, the specified maximum curves should never be exceeded. Document Number: 28434 2 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 183 CPHT www.vishay.com Vishay BCcomponents b a c a Fig. 3 - Recommended soldering pad dimensions Table 3 RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters NOMINAL CASE SIZE LxWxH 5.0 x 5.0 x 5.8 6.3 x 6.3 x 5.8 6.3 x 6.3 x 7.7 8.0 x 8.0 x 10.5 10.0 x 10.0 x 10.5 CASE CODE a b c 0506 0606 0608 0810 1010 3.0 3.5 3.5 4.2 4.4 1.6 1.6 1.6 1.9 1.9 1.4 2.1 2.1 2.8 4.3 SOLDERING PROFILE FOR LEAD (Pb)-FREE REFLOW PROCESS (°C) Peak temperature Temperature of the Surface / Terminal Tpeak 230 t3 200 t2 180 Preheat t1 Time (s) Fig. 4 - Maximum temperature load during reflow soldering Table 4 REFLOW SOLDERING CONDITIONS for MAL2183xxxxxE3 PROFILE FEATURES 25 V 35 V TO 80 V Maximum time between 150 °C to 180 °C (t1) 120 s 120 s Maximum time above 200 °C (t2) 80 s 70 s Maximum time above 230 °C (t3) 50 s 30 s Peak temperature TPeak 240 °C 240 °C Maximum reflow cycles 2 1 Note • Temperature measuring point on top of the case and on terminals Revision: 22-Sep-17 Document Number: 28434 3 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 183 CPHT www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA SYMBOL Hybrid conductive polymer 183 CPHT series DESCRIPTION CR Rated capacitance at 120 Hz, tolerance ± 20 % IR 125 °C Rated RMS ripple current at 100 kHz IL2 Max. leakage current after 2 min at UR tan  Max. dissipation factor at 120 Hz ESR Max. ESR at 100 kHz 100 μF / 25 V; ± 20 % Nominal case size: 6.3 mm x 6.3 mm x 7.7 mm; taped on reel Ordering code: MAL218397603E3 Note • Unless otherwise specified, all electrical values in Table 5 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 % Table 5 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 25 35 50 63 80 CR (μF) NOMINAL CASE SIZE LxWxH (mm) IR 125 °C 100 kHz (mA) IL2 2 min (μA) tan  120 Hz ESR 100 kHz 20 °C (m) ORDERING CODE MAL2183... 33 5.0 x 5.0 x 5.8 550 8.3 0.14 80 97601E3 56 6.3 x 6.3 x 5.8 900 14 0.14 50 97602E3 100 6.3 x 6.3 x 7.7 1400 25 0.14 30 97603E3 220 8.0 x 8.0 x 10.5 1600 55 0.14 27 97604E3 330 10.0 x 10.0 x 10.5 2000 82.5 0.14 20 97605E3 22 5.0 x 5.0 x 5.8 550 7.7 0.12 100 97001E3 47 6.3 x 6.3 x 5.8 900 16.5 0.12 60 97002E3 68 6.3 x 6.3 x 7.7 1400 23.8 0.12 35 97003E3 150 8.0 x 8.0 x 10.5 1600 52.5 0.12 27 97004E3 270 10.0 x 10.0 x 10.5 2000 94.5 0.12 20 97005E3 10 5.0 x 5.0 x 5.8 500 5 0.1 120 97101E3 22 6.3 x 6.3 x 5.8 750 11 0.1 80 97102E3 33 6.3 x 6.3 x 7.7 1100 16.5 0.1 40 97103E3 68 8.0 x 8.0 x 10.5 1250 34 0.1 30 97104E3 100 10.0 x 10.0 x 10.5 1600 50 0.1 28 97105E3 120 10.0 x 10.0 x 10.5 1600 60 0.1 28 97106E3 10 6.3 x 6.3 x 5.8 700 6.3 0.08 120 97801E3 22 6.3 x 6.3 x 7.7 900 13.9 0.08 80 97802E3 33 8.0 x 8.0 x 10.5 1100 20.8 0.08 40 97803E3 56 10.0 x 10.0 x 10.5 1400 35.3 0.08 30 97804E3 68 10.0 x 10.0 x 10.5 1400 42.8 0.08 30 97805E3 22 8.0 x 8.0 x 10.5 1050 17.6 0.08 45 97806E3 33 10.0 x 10.0 x 10.5 1360 26.4 0.08 36 97701E3 47 10.0 x 10.0 x 10.5 1360 37.6 0.08 36 97702E3 Table 6 ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE IEC 60384-25, subclause 4.14 Us  1.15 x UR Voltage Surge voltage for short periods Revision: 22-Sep-17 Document Number: 28434 4 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 183 CPHT www.vishay.com Vishay BCcomponents USEFUL LIFE AND ENDURANCE Table 7 ENDURANCE TEST AND USEFUL LIFE SERIES CASE CODE USEFUL LIFE AT 125 °C (h) (1) ENDURANCE AT 125 °C (h) ENDURANCE AT 105 °C (h) ENDURANCE AT 85 °C (h) ENDURANCE AT 75 °C (h) ENDURANCE AT 65 °C (h) 183 CPHT 0506 to 1010 4000 4000 16 000 64 000 128 000 256 000 Note (1) Identical with endurance for this series Endurance can be calculated by formula below: L = L Tmax. x 2 T max. - T a ------------------------10 L: estimated lifetime (h) LTmax.: base lifetime specified at maximum operating temperature with applied DC voltage (h) Tmax.: rated maximum operating temperature (°C) Ta: actual ambient temperature (°C) Table 8 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) 120 1000 0.1 0.3 10 000  100 000 0.6 1 IR MULTIPLIER Table 9 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE PROCEDURE (quick reference) REQUIREMENTS C/C: ± 5 % tan   spec. limit IL2  spec. limit Mounting IEC 60384-25, subclause 4.3 Shall be performed prior to tests mentioned below; reflow soldering; for maximum temperature load refer to chapter “Mounting” Endurance IEC 60384-25 / CECC 32300, subclause 4.15 Tamb = 125 °C; UR applied; for test duration see Table 7 Useful life CECC 30301, subclause 1.8.1 Tamb = 125 °C; UR and IR applied; for test duration see Table 7 C/C: ± 30 % tan   2 x spec. limit IL2  spec. limit ESR  2 x spec. limit Shelf life (storage at high temperature) IEC 60384-25 / CECC 32300, subclause 4.16 Tamb = 125 °C; no voltage applied; 1000 h after test: UR to be applied for 30 min, 24 h to 48 h before measurement For requirements see “Endurance test” above C/C: ± 30 % tan   2 x spec. limit IL2  spec. limit ESR  2 x spec. limit        Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability. Revision: 22-Sep-17 Document Number: 28434 5 For technical questions, contact: aluminumcaps1@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000