MAL219390101E3

193 PUR-SI Solar www.vishay.com Vishay BCcomponents Aluminum Electrolytic Capacitors Power Ultra High Ripple Current Snap-In for Solar FEATURES • Long useful life: 6000 h at +105 °C • Specified for 500 V, 50 °C operation • High ripple current capability • High reliability • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS 159 PUL-SI (500 V) Higher temperature 85 °C 4-Terminal 193 PUR-SI Solar • Solar PV inverters 096 PLL-4TSI • Industrial motor control • Power supply Fig. 1 MARKING QUICK REFERENCE DATA DESCRIPTION The capacitors are marked (where possible) with the following information: VALUE Nominal case size  (D x L in mm) 35 x 30 to 35 x 60 Rated capacitance range, CR 220 μF to 560 μF ± 20 % Tolerance on CR Rated voltage, UR • Two digit date code, in accordance with IEC 60062 -40 °C to +50 °C 450 V Category voltage, UC Category temperature range 6000 h Endurance at UR, 50 °C, no ripple applied 5000 h Shelf life at 0 V, 105 °C 1000 h • Name of manufacturer • Code for factory of origin -40 °C to +105 °C Useful life at UC, 105 °C, IR applied • Tolerance code on rated capacitance, code letter in accordance with IEC 60062 (± 20 %) • Rated voltage (in V) 500 V Rated temperature range • Rated capacitance (in μF) • “-” sign to identify the negative terminal, visible from the top and side of the capacitor • Code number Based on sectional specification • Climatic category in accordance with IEC 60068 • “LL” for long life grade IEC 60384-4 / EN130300 Climatic category IEC 60068 40 / 105 / 56 SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) UR (V) CR (μF) 500 220 35 x 30 - 330 - 35 x 40 - - - 390 - - 35 x 45 - - 470 - - - 35 x 50 - 560 - - - - 35 x 60 Revision: 31-Jan-17 - - - Document Number: 28407 1 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 193 PUR-SI Solar www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters AND AVAILABLE FORMS TWO TERMINAL SNAP-IN ØD + Terminal L + 2 max. L 10 ± 0.1 - Terminal Bottom view 5.8 +0 - 1 mm Ø 2 ± 0.1 (2 x) The minus terminal can be marked with a black dot or with an imprinted “-” sign. Fig. 2 - Two terminal snap-in Fig. 3 - Mounting hole diagram Table 1 DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE Ø Dmax. Lmax. MASS (g) PACKAGING QUANTITIES (unit per box) CARDBOARD BOX DIMENSIONS LxWxH 35 x 30 36 32 40 50 390 x 198 x 44 35 x 40 36 42 56 50 390 x 198 x 54 35 x 45 36 47 64 50 390 x 198 x 59 35 x 50 36 52 72 50 390 x 198 x 64 35 x 60 36 62 88 50 390 x 198 x 74 Note • Other case sizes, terminations and capacitance values available on request. ORDERING EXAMPLE ELECTRICAL DATA SYMBOL Electrolytic capacitors 470 μF / 500 V DESCRIPTION Nominal case size: Ø 35 mm x 50 mm CR Rated capacitance at 100 Hz IR Rated RMS ripple current at 100 Hz and 105 °C IL1 Max. leakage current after 1 min at UR ESR Z Ordering code: MAL219390104E3 Max. equivalent series resistance at 100 Hz Max. impedance at 10 kHz Note • Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %. Table 2 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 500 UC (V) 450 CR (μF) CASE SIZE ØDxL (mm) IR 100 Hz 105 °C (A) (1) IL 1 min (mA) ESR 100 Hz MAX. (m) Z 10 kHz MAX. (m) ORDERING CODE 220 35 x 30 1.35 0.6 900 600 MAL219390101E3 330 35 x 40 1.74 0.9 600 400 MAL219390102E3 390 35 x 45 1.94 1.1 500 350 MAL219390103E3 470 35 x 50 2.18 1.3 450 300 MAL219390104E3 560 35 x 60 2.52 1.5 350 250 MAL219390105E3 Note (1) At U max.  UC Revision: 31-Jan-17 Document Number: 28407 2 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 193 PUR-SI Solar www.vishay.com Vishay BCcomponents ADDITIONAL ELECTRICAL DATA PARAMETER Voltage Surge voltage Reverse voltage Current CONDITIONS VALUE Us = 1.1 x UC Urev  1 V Leakage current Inductance Equivalent series inductance (ESL) After 1 min at UR After 5 min at UR IL1  0.006 CR x UC IL5  0.002 CR x UC All case sizes ca. 20 nH RIPPLE CURRENT AND USEFUL LIFE Table 3 ENDURANCE TEST DURATION AND USEFUL LIFE ENDURANCE AT 50 °C, 500 V (h) 5000 USEFUL LIFE AT 105 °C, 450 V (h) 6000 Note • Multiplier of useful life code: MGA454 MGA454 2.7 IA IR 2.6 2.5 2.4 2.3 2.2 2.1 2.0 1.9 1 2 Life multiplier 5 2. 3 1.7 2 1. 5 1. 1.8 4 5 1.6 7 10 15 1.5 20 1.2 IA = Actual ripple current at 120 Hz IR = Rated ripple current at 120 Hz and 105 °C (1) Useful life at 105 °C and IR applied: 6000 h 1.1 1.0 0.8 0.5 0.0 40 60 0 10 0 15 0 20 0 30 0 40 0 60 1.3 30 1.4 40 50 (1) 60 70 80 90 100 110 Tamb (°C) Fig. 4 - Multiplier of useful life as a function of ambient temperature and ripple current load Revision: 31-Jan-17 Document Number: 28407 3 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 193 PUR-SI Solar www.vishay.com Vishay BCcomponents Table 4 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) 50 100 120 200 1000  10 000 1.15 1.30 1.40 IR MULTIPLIER 0.90 0.95 1.00 Table 5 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance REFERENCE IEC 60384-4 / EN130301 subclause 4.13 PROCEDURE (quick reference) REQUIREMENTS Tamb = 50 °C; UR = 500 V applied;  5000 h C/C: ± 15 % ESR  1.5 x spec. limit Z  2 x spec. limit IL5  spec. limit Useful life EN130301 subclause 1.8.1 Tamb = 105 °C; UC and IR applied;  6000 h C/C: ± 30 % ESR  3 x spec. limit Z  3 x spec. limit IL5  spec. limit no short or open circuit,  no visible damage total failure percentage  1 % Shelf life (storage at high temperature) IEC 60384-4 / EN130300 subclause 4.17 Tamb = 105 °C; no voltage applied; 1000 h after test: UC to be applied for 30 min,  24 h to 48 h before measurement C/C: ± 15 % ESR  1.5 x spec. limit IL5  2 x spec. limit                                     Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability. Revision: 31-Jan-17 Document Number: 28407 4 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2021 1 Document Number: 91000