193 PUR-SI Solar
www.vishay.com
Vishay BCcomponents
Aluminum Electrolytic Capacitors
Power Ultra High Ripple Current Snap-In for Solar
FEATURES
• Tailored design for solar PV inverters
• Specified for higher voltage, up to 600 V at
specific operation conditions
• Long useful life: 6000 h at +105 °C
• > 25 years 24/7 application life at 60 °C
• High ripple current capability
• High reliability
LINKS TO ADDITIONAL RESOURCES
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
3D 3D
3D Models
APPLICATIONS
193 PUR-SI
Higher
temperature
85 °C
4-Terminal
193 PUR-SI
Solar
096 PLL-4TSI
• Solar PV inverters
• Industrial motor control
Fig. 1
• Power supply
QUICK REFERENCE DATA
MARKING
DESCRIPTION
Nominal case size (D x L in mm)
Rated capacitance range, CR
Tolerance on CR
Rated voltage, UR
The capacitors are marked (where possible) with the
following information:
Rated temperature range
Endurance at UR, 50 °C,
no ripple applied
Endurance at UR, 60 °C,
no ripple applied
Category voltage, UC
Category temperature range
Useful life at UC, 105 °C,
IR applied
Operation up to 600 V, 60 °C,
no ripple applied (1)
Shelf life at 0 V, 105 °C
Based on sectional specification
Climatic category IEC 60068
VALUE
35 x 30 to 35 x 60
220 μF to 560 μF
± 20 %
500 V
570 V
-40 °C to
-40 °C to
+50 °C
+60 °C
5000 h
-
-
5000 h
• Rated capacitance (in μF)
• Tolerance code on rated capacitance, code letter in
accordance with IEC 60062 (± 20 %)
• Rated voltage (in V)
• Two digit date code, in accordance with IEC 60062
450 V
475 V
-40 °C to +105 °C
• Code for factory of origin
• “-” sign to identify the negative terminal, visible from the
top and side of the capacitor
6000 h
-
• Name of manufacturer
> 200 h
1000 h
IEC 60384-4 / EN130300
40 / 105 / 56
• Code number
• Climatic category in accordance with IEC 60068
• “LL” for long life grade
Note
Single operation max. 5 min, 600 V, 60 °C, no ripple current;
afterwards min. 1 hour within specified UR or UC conditions
(1)
SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(μF)
220
330
390
470
560
Revision: 30-Jun-2022
UR (V)
35 x 30
-
35 x 40
-
35 x 45
-
35 x 50
-
35 x 60
Document Number: 28407
1
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
193 PUR-SI Solar
www.vishay.com
Vishay BCcomponents
DIMENSIONS in millimeters AND AVAILABLE FORMS
TWO TERMINAL SNAP-IN
ØD
+ Terminal
L + 2 max.
L
- Terminal
10 ± 0.1
5.8 +- 01 mm
Bottom view
Ø 2 ± 0.1 (2 x)
The minus terminal can be marked with a black dot
or with an imprinted “-” sign.
Fig. 2 - Two terminal snap-in
Fig. 3 - Mounting hole diagram
THREE TERMINAL SNAP-IN
ØD
Ø 2 ± 0.1 (2 x)
Ø 2.5 ± 0.1
The 10 mm spacing of the 2 pin
snap-in is used as the base layout
and a third hole is added.
The third hole is closer to the
10 ± 0.1
negative primary hole so that
polarization is always maintained,
together with added mechanical
stability.
+ Terminal
L + 2 max.
L
- Terminal
Minus pole
marking
4 ± 0.5
Bottom view
3.3 ± 0.1
The negative terminal has TWO pins which are BOTH
electrically connected
4.75 ± 0.1
Fig. 4 - Three terminal snap-in
Fig. 5 - Mounting hole diagram
Table 1
DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
NOMINAL
CASE SIZE
Ø Dmax.
Lmax.
MASS (g)
PACKAGING
QUANTITIES
(unit per box)
CARDBOARD BOX
DIMENSIONS
LxWxH
35 x 30
36
32
40
50
390 x 198 x 44
35 x 40
36
42
56
50
390 x 198 x 54
35 x 45
36
47
64
50
390 x 198 x 59
35 x 50
36
52
72
50
390 x 198 x 64
35 x 60
36
62
88
50
377 x 375 x 88
Revision: 30-Jun-2022
Document Number: 28407
2
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
193 PUR-SI Solar
www.vishay.com
Vishay BCcomponents
ORDERING EXAMPLE
ELECTRICAL DATA
SYMBOL
Electrolytic capacitors 470 μF / 500 V
DESCRIPTION
Nominal case size: Ø 35 mm x 50 mm
CR
Rated capacitance at 100 Hz
IR
Rated RMS ripple current at 100 Hz and 105 °C
IL1
Max. leakage current after 1 min at UR
ESR
2-terminal snap-in:
Ordering code: MAL219390104E3
3-terminal snap-in:
Max. equivalent series resistance at 100 Hz
Z
Ordering code: MAL219390114E3
Max. impedance at 10 kHz
Note
• Unless otherwise specified, all electrical values in Table 2 apply
at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %
Table 2
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
500
570
UC
(V)
450
475
CR
(μF)
CASE SIZE
ØDxL
(mm)
IR
100 Hz
105 °C
(A) (1)
IL
1 min
(mA)
ESR
100 Hz
MAX.
(mΩ)
Z
10 kHz
MAX.
(mΩ)
2-TERM.
3-TERM.
220
35 x 30
1.35
0.6
900
600
MAL219390101E3
MAL219390111E3
330
35 x 40
1.74
0.9
600
400
MAL219390102E3
MAL219390112E3
390
35 x 45
1.94
1.1
500
350
MAL219390103E3
MAL219390113E3
470
35 x 50
2.18
1.3
450
300
MAL219390104E3
MAL219390114E3
560
35 x 60
2.52
1.5
350
250
MAL219390105E3
MAL219390115E3
220
35 x 30
1.32
0.7
600
450
MAL219390121E3
MAL219390131E3
330
35 x 40
1.70
1.0
400
300
MAL219390122E3
MAL219390132E3
390
35 x 45
1.90
1.2
350
250
MAL219390123E3
MAL219390133E3
470
35 x 50
2.14
1.4
300
200
MAL219390124E3
MAL219390134E3
560
35 x 60
2.46
1.6
250
150
MAL219390125E3
MAL219390135E3
ORDERING CODE
MAL2193.......
Notes
• Other case sizes, terminations and capacitance values available on request
(1) At U
max. ≤ UC
ADDITIONAL ELECTRICAL DATA
PARAMETER
CONDITIONS
VALUE
Voltage
Us = 1.1 x UC
Surge voltage
Urev ≤ 1 V
Reverse voltage
Current
Leakage current
After 1 min at UR
IL1 ≤ 0.006 CR x UC
After 5 min at UR
IL5 ≤ 0.002 CR x UC
All case sizes
ca. 20 nH
Inductance
Equivalent series inductance (ESL)
Revision: 30-Jun-2022
Document Number: 28407
3
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
193 PUR-SI Solar
www.vishay.com
Vishay BCcomponents
RIPPLE CURRENT AND USEFUL LIFE
Table 3
ENDURANCE TEST DURATION AND USEFUL LIFE
PARAMETER
CONDITIONS
VALUE
UR = 500 V, 50 °C, no ripple applied
Endurance
5000 h
UR = 570 V, 60 °C, no ripple applied
UC = 450 V; 105 °C, IR applied
Useful life
6000 h
UC = 475 V; 105 °C, IR applied
MGA454
2.7
IA
IR
2.6
2.5
2.4
2.3
2.2
2.1
2.0
1.9
1
2
Life multiplier
5
2.
3
1.7
2
1. 5
1.
1.8
4
5
1.6
7
10
15
1.5
20
1.2
IA = Actual ripple current at 100 Hz
IR = Rated ripple current at 100 Hz and 105 °C
(1)
Useful life at 105 °C and IR applied: 6000 h
1.1
1.0
0.8
0.5
0.0
40
60
0
10 0
15
0
20 0
30
0
40 0
60
1.3
30
1.4
40
50
(1)
60
70
80
90
100
110
Tamb (°C)
Fig. 6 - Multiplier of useful life as a function of ambient temperature and ripple current load
Table 4
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQUENCY (Hz)
50
100
120
200
1000
≥ 10 000
1.15
1.30
1.40
IR MULTIPLIER
0.90
Revision: 30-Jun-2022
1.00
1.05
Document Number: 28407
4
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
193 PUR-SI Solar
www.vishay.com
Vishay BCcomponents
Table 5
TEST PROCEDURES AND REQUIREMENTS
TEST
NAME OF TEST
IEC 60384-4 /
Endurance
PROCEDURE
(quick reference)
REFERENCE
EN130301
subclause 4.13
REQUIREMENTS
ΔC/C: ± 15 %
Tamb = 50 °C; UR = 500 V applied;
Tamb = 60 °C; UR = 570 V applied;
5000 h
ESR ≤ 1.5 x spec. limit
Z ≤ 2 x spec. limit
IL5 ≤ spec. limit
ΔC/C: ± 30 %
ESR ≤ 3 x spec. limit
Useful life
EN130301
Tamb = 105 °C; UC and IR applied;
subclause 1.8.1
6000 h
Z ≤ 3 x spec. limit
IL5 ≤ spec. limit
no short or open circuit
no visible damage
total failure percentage ≤ 1 %
Shelf life
IEC 60384-4 /
(storage at
EN130300
high temperature)
subclause 4.17
Tamb = 105 °C; no voltage applied;
1000 h
After test: UC to be applied for 30 min,
24 h to 48 h before measurement
ΔC/C: ± 15 %
ESR ≤ 1.5 x spec. limit
IL5 ≤ 2 x spec. limit
Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the
lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability.
Revision: 30-Jun-2022
Document Number: 28407
5
For technical questions, contact: aluminumcaps2@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
