MAL225620472E3

256 PMG-SI www.vishay.com Vishay BCcomponents Aluminum Electrolytic Capacitors Power Miniaturized General Purpose - Snap-In FEATURES • Useful life: 2000 h at +105 °C, > 5000 h at +85 °C • Voltage range from 16 V to 100 V • Polarized aluminum electrolytic capacitors, non-solid electrolyte • Pressure relief on the top of the aluminum case • PET insulation sleeve • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS 256 PMG-SI • • • • • • 158 PUL-SI longer life Fig. 1 QUICK REFERENCE DATA DESCRIPTION Nominal case size (D x L in mm) Rated capacitance range (E6 series), CR Tolerance on CR Rated voltage range, UR Category temperature range Endurance test at +105 °C Useful life at +105 °C Useful life at +85 °C Shelf life at 0 V, 105 °C Based on sectional specification Climatic category IEC 60068 General purpose, industrial Standard and switched mode power supplies Audio systems DC/DC converters Telecom Smoothing and filtering MARKING VALUE 20 x 25 to 35 x 45 820 μF to 47 000 μF ± 20 % 16 V to 100 V -40 °C to +105 °C 2000 h 2000 h > 5000 h 1000 h IEC 60384-4 / EN130300 40 / 105 / 56 The capacitors are marked (where possible) with the following information: • Rated capacitance (in μF) • Tolerance on rated capacitance, code letter in accordance with IEC 60062 (± 20 %) • Rated voltage (in V) • Date code; abbreviation in 2 digits in accordance with IEC 60062 • Name of manufacturer • Code for factory of origin (04) • “-” sign to identify the negative terminal, visible from the top and side of the capacitor • Relevant part of ordering code. Example MAL225638472E3, marking will show: 256 38472 • Climatic category in accordance with IEC 60068 • LL for Long Life SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) CR (μF) 820 1200 1500 16 - 25 - 35 - UR (V) 50 - 2200 - - - 22 x 25 2700 3300 3900 4700 5600 6800 8200 10 000 15 000 22 000 33 000 47 000 20 x 25 22 x 30 25 x 30 30 x 30 35 x 35 22 x 25 22 x 40 25 x 40 - 22 x 25 22 x 25 25 x 30 30 x 30 35 x 40 - 22 x 25 22 x 30 22 x 35 25 x 30 25 x 40 30 x 40 - Revision: 17-Oct-16 63 22 x 25 22 x 30 25 x 25 25 x 35 25 x 40 35 x 30 35 x 40 - 80 22 x 35 100 22 x 30 25 x 30 - 25 x 30 25 x 40 35 x 25 35 x 30 35 x 45 35 x 40 - 30 x 35 30 x 40 35 x 40 35 x 45 - Document Number: 28410 1 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 256 PMG-SI www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters AND AVAILABLE FORMS Position of the pressure relief/ safety vent ØD + Terminal L + 2 max. L 10 ± 0.1 - Terminal 4.0 ± 0.5 Bottom view Ø 2 ± 0.1 (2 x) The minus and/or plus terminal can be marked with an imprinted sign. Fig. 2 - Two terminal snap-in Fig. 3 - Mounting hole diagram Table 1 DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE Ø D x L Ø Dmax. Lmax. MASS (g) PACKAGING QUANTITIES (units per box) CARDBOARD BOX DIMENSIONS LxWxH 20 x 25 21 27  10 104 310 x 200 x 42 22 x 25 23 27  11 84 310 x 200 x 42 22 x 30 23 32  15 84 310 x 200 x 47 22 x 35 23 37  17 84 310 x 200 x 52 22 x 40 23 42  19 84 310 x 200 x 57 25 x 25 26 27  15 66 310 x 200 x 42 25 x 30 26 32  18 66 310 x 200 x 47 25 x 35 26 37  20 66 310 x 200 x 52 25 x 40 26 42  27 66 310 x 200 x 57 25 x 50 26 52  28 66 310 x 200 x 67 30 x 30 31 32  32 45 310 x 200 x 47 30 x 35 31 37  35 45 310 x 200 x 52 30 x 40 31 42  37 45 310 x 200 x 57 30 x 50 31 52  42 45 310 x 200 x 67 35 x 25 36 27  32 40 310 x 200 x 42 35 x 30 36 32  38 40 310 x 200 x 47 35 x 35 36 37  43 40 310 x 200 x 52 35 x 40 36 42  50 40 310 x 200 x 57 35 x 45 36 47  57 40 310 x 200 x 62 ORDERING EXAMPLE ELECTRICAL DATA SYMBOL DESCRIPTION Aluminum electrolytic capacitor 256 series; CR Rated capacitance at 120 Hz, +20 °C 4700 μF / 63 V; IR Rated RMS ripple current at 120 Hz, +105 °C 2-terminal snap-in: MAL225638472E3 IL5 ESR Max. leakage current after 5 min at UR Max. equivalent series resistance at 120 Hz, +20 °C Notes • Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 % Revision: 17-Oct-16 Document Number: 28410 2 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 256 PMG-SI www.vishay.com Vishay BCcomponents Table 2 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 16 25 35 50 63 80 100 CR (μF) CASE SIZE Ø D x L (mm) 10 000 15 000 22 000 33 000 47 000 8200 15 000 22 000 22 000 3300 4700 6800 10 000 22 000 2200 2700 3300 3900 4700 6800 10 000 1200 2200 2200 3300 4700 4700 6800 10 000 1500 2200 3300 4700 5600 6800 820 1200 2200 2700 3300 4700 5600 20 x 25 22 x 30 25 x 30 30 x 30 35 x 35 22 x 25 22 x 40 25 x 40 30 x 30 22 x 25 22 x 25 25 x 30 30 x 30 35 x 40 22 x 25 22 x 25 22 x 30 22 x 35 25 x 30 25 x 40 30 x 40 22 x 25 22 x 30 25 x 25 25 x 35 25 x 40 30 x 30 35 x 30 35 x 40 22 x 35 25 x 30 35 x 25 35 x 30 35 x 45 35 x 40 22 x 30 25 x 30 25 x 40 30 x 35 30 x 40 35 x 40 35 x 45 IR 120 Hz +105 C (A) 1.61 2.20 2.77 3.48 4.85 1.73 2.65 3.22 3.18 1.31 1.63 2.04 2.75 4.69 1.48 1.53 1.76 1.97 2.18 2.92 3.55 1.19 1.55 1.60 2.06 2.51 2.48 3.30 3.90 1.48 1.65 2.30 2.64 3.39 3.56 1.14 1.56 2.15 2.37 2.77 3.30 3.51 tan  120 Hz +20 °C 0.50 0.50 0.50 0.50 0.50 0.45 0.45 0.45 0.45 0.40 0.40 0.40 0.40 0.40 0.35 0.35 0.35 0.35 0.35 0.35 0.35 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.30 0.25 0.25 0.25 0.25 0.25 0.25 0.20 0.20 0.20 0.20 0.20 0.20 0.20 TYP. ESR 120 Hz +20 °C (1) () 0.047 0.031 0.021 0.014 0.010 0.040 0.022 0.015 0.015 0.074 0.053 0.037 0.027 0.013 0.088 0.072 0.059 0.050 0.042 0.030 0.022 0.118 0.069 0.069 0.049 0.038 0.038 0.028 0.020 0.081 0.056 0.040 0.030 0.026 0.022 0.100 0.072 0.044 0.036 0.030 0.023 0.020 MAX. ESR 120 Hz +20 °C (1) () 0.066 0.044 0.030 0.020 0.014 0.073 0.040 0.027 0.027 0.161 0.113 0.078 0.053 0.024 0.211 0.172 0.141 0.119 0.099 0.068 0.046 0.332 0.181 0.181 0.121 0.085 0.085 0.059 0.040 0.221 0.151 0.101 0.071 0.059 0.049 0.324 0.221 0.121 0.098 0.080 0.056 0.047 IL 5 min (mA) ORDERING CODE 1.20 1.47 1.50 1.50 1.50 1.36 1.50 1.50 1.50 1.02 1.22 1.46 1.50 1.50 0.99 1.10 1.22 1.32 1.45 1.50 1.50 0.82 1.12 1.12 1.37 1.50 1.50 1.50 1.50 1.04 1.26 1.50 1.50 1.50 1.50 0.86 1.04 1.41 1.50 1.50 1.50 1.50 MAL225615103E3 MAL225625153E3 MAL225635223E3 MAL225645333E3 MAL225655473E3 MAL225626822E3 MAL225626153E3 MAL225636223E3 MAL225646223E3 MAL225620332E3 MAL225620472E3 MAL225630682E3 MAL225640103E3 MAL225650223E3 MAL225621222E3 MAL225621272E3 MAL225621332E3 MAL225621392E3 MAL225631472E3 MAL225631682E3 MAL225641103E3 MAL225628122E3 MAL225628222E3 MAL225638222E3 MAL225638332E3 MAL225638472E3 MAL225648472E3 MAL225658682E3 MAL225658103E3 MAL225622152E3 MAL225632222E3 MAL225652332E3 MAL225652472E3 MAL225652562E3 MAL225652682E3 MAL225629821E3 MAL225639122E3 MAL225639222E3 MAL225649272E3 MAL225649332E3 MAL225659472E3 MAL225659562E3 Note (1) ESR at 100 Hz is approximately 1.05 x ESR 120 Hz ADDITIONAL ELECTRICAL DATA PARAMETER Voltage Surge voltage Reverse voltage Inductance CONDITIONS VALUE at +85 °C at +105 °C Us = 1.25 x UR Urev  1 V Equivalent series inductance (ESL) All case sizes Typ. 19 nH Max. 25 nH Revision: 17-Oct-16 Document Number: 28410 3 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 256 PMG-SI www.vishay.com Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE Table 3 ENDURANCE TEST DURATION AND USEFUL LIFE ENDURANCE AT 105 °C (h) USEFUL LIFE AT 105 °C (h) 2000 2000 Note • Multiplier of useful life code: CCC208 CCC208 IA 3.0 IR 2.8 2.6 2.4 2.2 2.0 1.8 Lifetime multiplier 1.6 1.4 1.2 1.0 0.8 0.5 0.0 (1) 60 70 80 3. 0 1. 0 5 1. 50 10 0 5. 40 20 80 40 IA = Actual ripple current at 100 Hz IR = Rated ripple current at 100 Hz, 105 °C (1) Useful life at 105 °C and IR applied: 2000 h 90 100 110 Tamb (°C) Fig. 4 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 4 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) 50 100 120 500 1000  10 000 1.13 1.19 1.20 IR MULTIPLIER 0.92 Revision: 17-Oct-16 0.95 1.00 Document Number: 28410 4 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 256 PMG-SI www.vishay.com Vishay BCcomponents Table 5 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE PROCEDURE (quick reference) REQUIREMENTS IEC 60384-4 / EN130300 subclause 4.13 Tamb = 105 C; UR and IR applied; 2000 h C/C: ± 20 % tan   2 x spec. limit IL5 spec. limit Useful life CECC 30301 subclause 4.13 Tamb = 105 C; UR and IR applied; 2000 h  Tamb = 85 C; UR and IR applied; > 5000 h C/C: ± 20 % tan   2 x spec. limit IL5  spec. limit no short or open circuit, no visible damage total failure percentage  1 % Shelf life (storage at high temperature) IEC 60384-4 / EN130300 subclause 4.17 Tamb = 105 C; no voltage applied; 1000 h after test: UR to be applied for 30 min, 24 h to 48 h before measurement C/C: ± 20 % tan   1.5 x spec. limit IL5  2 x spec. limit Vibration IEC 60384-4 / EN130300 subclause 4.8 10 Hz to 55 Hz; 0.037 m or 5 g (whichever is less); 3 axis; 2 h per axis C/C: ± 10 % tan   spec. limit IL5  spec. limit Endurance                                             Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability. Revision: 17-Oct-16 Document Number: 28410 5 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000