MAL229956681E3

299 PHL-4TSI www.vishay.com Vishay BCcomponents Aluminum Electrolytic Capacitors Power High Ripple Current Long Life 4-Terminal Snap-In FEATURES • Polarized aluminum electrolytic capacitors, non-solid electrolyte • Large types, minimized dimensions, cylindrical aluminum case, insulated with a blue sleeve • Pressure relief on the side of the aluminum case • Very long useful life: 5000 h at 105 °C • Temperature range up to 105 °C • Stable mounting and keyed polarity • High ripple current capability • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 ADDITIONAL RESOURCES 3D 3D APPLICATIONS 3D Models 105 °C 096 PLL-4TSI • Switched mode power supplies • Renewable energy power converters • Energy storage in pulse systems 299 PHL-4TSI MARKING Fig. 1 The capacitors are marked (where possible) with the following information: • Rated capacitance (in μF) • Tolerance code on rated capacitance, code letter in accordance with IEC 60062 (M for ± 20 %) • Rated voltage (in V) • Date code • Name of manufacturer • Code for factory of origin • “-” sign to identify the negative terminal, visible from the top and side of the capacitor • (Partial) ordering code • Climatic category in accordance with IEC 60068 QUICK REFERENCE DATA DESCRIPTION Nominal case size (D x L in mm) Rated capacitance range CR Tolerance on CR Rated voltage range, UR Category temperature range Endurance test at 105 °C Useful life at 105 °C Shelf life at 0 V, 105 °C Based on sectional specification Climatic category IEC 60068 VALUE 35 x 50 to 45 x 100 470 μF to 2200 μF ± 20 % 400 V to 450 V -40 °C to +105 °C 2000 h 5000 h 1000 h IEC 60384-4 / EN 130300 40 / 105 / 56 SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) UR (V) CR (μF) 400 470 - 560 35 x 50 680 40 x 40 35 x 60 40 x 50 820 1000 1200 1500 1800 2200 Revision: 27-Sep-2019 35 x 70 35 x 80 40 x 70 45 x 60 35 x 100 45 x 70 40 x 100 45 x 80 45 x 100 450 35 x 50 40 x 40 35 x 60 40 x 50 35 x 70 35 x 80 40 x 60 35 x 100 40 x 80 45 x 60 45 x 70 40 x 100 45 x 80 45 x 100 - Document Number: 28432 1 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 299 PHL-4TSI www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters AND AVAILABLE FORMS 4-TERMINAL SNAP-IN 60° 60° 60° B 60° A C dummy ØD dummy 22.5 ± 0.1 2 ± 0.1 (4 x) 22.5 Lmax. 6.3 ± 1 Bottom view Fig. 2 - 4-Terminal snap-in Fig. 3 - Mounting hole diagram Dummy terminals (A and C) must be free from the electrical circuit. Table 1 DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE ØDxL 35 x 50 35 x 60 35 x 70 35 x 80 35 x 100 40 x 40 40 x 50 40 x 60 40 x 70 40 x 80 40 x 100 45 x 60 45 x 70 45 x 80 45 x 100 Ø DMAX. Lmax. MASS (g) PACKAGING QUANTITIES (units per box) 36 36 36 36 36 41 41 41 41 41 41 46 46 46 46 52 62 72 82 102 42 52 62 72 82 102 62 72 82 102 72 91 103 115 151 70 94 118 134 150 176 150 170 190 250 50 50 50 50 50 50 50 25 25 25 25 36 36 36 36 ELECTRICAL DATA SYMBOL CR IR IL5 ESR Z DESCRIPTION Rated capacitance at 100 Hz Rated RMS ripple current at 100 Hz and 105 °C Max. leakage current after 5 min at UR Max. equivalent series resistance at 100 Hz Max. impedance at 10 kHz CARDBOARD BOX DIMENSIONS LxWxH 390 x 198 x 60 390 x 198 x 70 377 x 375 x 97 377 x 375 x 107 377 x 375 x 127 440 x 223 x 60 440 x 223 x 70 230 x 230 x 80 230 x 230 x 90 230 x 230 x 100 230 x 230 x 120 377 x 375 x 87 377 x 375 x 97 377 x 375 x 107 377 x 375 x 127 ORDERING EXAMPLE Electrolytic capacitor 299 series 2200 μF / 400 V 4-terminal snap-in: Ordering code: MAL2 299 56222 E3  Former 12NC: 2222 299 56222 Note • Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 % Revision: 27-Sep-2019 Document Number: 28432 2 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 299 PHL-4TSI www.vishay.com Vishay BCcomponents Table 2 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 400 450 CR (μF) NOMINAL CASE SIZE ØDxL (mm) IR 100 Hz 105 °C (A) IL5 5 min (mA) TYP. ESR 100 Hz (m) MAX. ESR 100 Hz (m) TYP. Z 10 kHz (m) MAX. Z 10 kHz (m) CATALOG NUMBER MAL2299....... 560 35 x 50 2.70 0.452 170 220 130 160 56561E3 680 40 x 40 2.79 0.548 150 190 110 140 56681E3 820 35 x 60 3.44 0.660 120 150 90 110 56821E3 820 40 x 50 3.51 0.660 120 160 90 110 66821E3 1000 35 x 70 3.88 0.804 100 130 70 90 56102E3 1200 35 x 80 4.34 0.964 90 110 60 80 56122E3 1200 40 x 70 4.50 0.964 90 110 60 80 66122E3 1200 45 x 60 4.61 0.964 90 110 60 80 76122E3 1500 35 x 100 5.54 1.204 70 90 50 60 56152E3 1500 45 x 70 5.20 1.204 70 90 60 70 66152E3 1800 40 x 100 6.02 1.444 50 70 40 50 56182E3 1800 45 x 80 5.74 1.444 60 80 50 60 66182E3 2200 45 x 100 6.77 1.764 50 60 40 50 56222E3 470 35 x 50 2.54 0.427 190 240 130 160 57471E3 470 40 x 40 2.45 0.427 190 240 140 170 67471E3 560 35 x 60 2.96 0.508 160 200 100 130 57561E3 560 40 x 50 3.05 0.508 160 200 110 140 67561E3 680 35 x 70 3.34 0.616 120 160 90 110 57681E3 820 35 x 80 3.76 0.742 110 140 70 90 57821E3 820 40 x 60 3.73 0.742 110 140 80 100 67821E3 1000 35 x 100 4.74 0.904 90 110 60 80 57102E3 1000 40 x 80 4.41 0.904 90 110 60 80 67102E3 1000 45 x 60 4.34 0.904 90 120 60 80 77102E3 1200 45 x 70 4.84 1.084 80 100 60 70 57122E3 1500 40 x 100 5.67 1.354 60 80 40 50 57152E3 1500 45 x 80 5.39 1.354 60 80 50 60 67152E3 1800 45 x 100 6.36 1.624 50 70 40 50 57182E3 ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE  400 V versions Us = 1.1 x UR Voltage Surge voltage Urev  1 V Reverse voltage Current Leakage current After 1 min at UR IL1  0.006 CR x UR + 4 μA After 5 min at UR IL5  0.002 CR x UR + 4 μA All case sizes Ca. 20 nH Inductance Equivalent series inductance (ESL) Revision: 27-Sep-2019 Document Number: 28432 3 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 299 PHL-4TSI www.vishay.com Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE Table 3 ENDURANCE TEST DURATION AND USEFUL LIFE ENDURANCE AT 105 °C (h) USEFUL LIFE AT 105 °C (h) 2000 5000 Note • Multiplier of useful life code: CCC206-5 CCC206-5 3.8 IA IR 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 2.8 2.6 2.4 2.2 2.0 1.8 IA = Actual ripple current at 100 Hz IR = Actual ripple current at 100 Hz and 105 °C 1.6 (1) 1.2 1.0 0.8 0.5 0.0 Useful life at 105 °C and IR applied: 5000 h Lifetime multiplier 1.4 (1) 1.0 1.5 2.0 90 3.0 80 4.0 6.0 70 10 20 60 30 50 50 70 0 10 0 20 40 100 110 Tamb (°C) Fig. 4 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 4 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY FREQUENCY (Hz) 50 100 200 0.9 1.0 1.2 400 1000 10 000 1.3 1.4 1.5 IR MULTIPLIER Revision: 27-Sep-2019 Document Number: 28432 4 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 299 PHL-4TSI www.vishay.com Vishay BCcomponents Table 5 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST Endurance REFERENCE IEC 60384-4 / EN130300 subclause 4.13 PROCEDURE (quick reference) REQUIREMENTS Tamb = 105 °C; UR applied 2000 h C/C: ± 10 % ESR  1.3 x spec. limit Z  2 x spec. limit IL5  spec. limit Useful life CECC 30301 subclause 4.13 Tamb = 105 °C; UR and IR applied;  5000 h C/C: ± 30 % ESR  3 x spec. limit Z  3 x spec. limit IL5  spec. limit no short or open circuit, no visible damage total failure percentage:  3 % Shelf life IEC 60384-4 / EN130300 subclause 4.17 Tamb = 105 °C; no voltage applied; 1000 h  After test: UR to be applied for 30 min 24 h to 48 h before measurement C/C: ± 10 % ESR  1.2 x spec. limit IL5  2 x spec. limit                                            Statements about product lifetime are based on calculations and internal testing. They should only be interpreted as estimations. Also due to external factors, the lifetime in the field application may deviate from the calculated lifetime. In general, nothing stated herein shall be construed as a guarantee of durability. Revision: 27-Sep-2019 Document Number: 28432 5 For technical questions, contact: aluminumcaps2@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000