MBA02040D2401FRP00

MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional www.vishay.com Vishay Beyschlag Professional Metal Film Leaded Resistors FEATURES • CECC version (IECQ-CECC according to EN 140101-806) approved • Excellent overall stability: class 0.25 • Wide ohmic range: 0.22  to 22 M • AEC-Q200 qualified available (1) • Radial version available for MBB/SMA 0207 • Alternative termination wires available e.g. weldable wire (MBA/SMA 0204 only) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESIGN SUPPORT TOOLS Note (1) AEC-Q200 qualified parts are available per tables “Temperature Coefficient and Resistance Range” click logo to get started Models APPLICATIONS Available • Industrial DESCRIPTION • Telecommunication MBA/SMA 0204, MBB/SMA 0207, and MBE/SMA 0414 professional leaded thin film resistors are the general purpose resistor for all fields of professional electronics where reliability and stability is of major concern. Typical applications include industrial, telecommunication, automotive, and medical equipment. • Medical equipment • Automotive TECHNICAL SPECIFICATIONS DESCRIPTION DIN size CECC size Resistance range MBA/SMA 0204 MBB/SMA 0207 MBE/SMA 0414 0204 0207 0414 A B D 0.22  to 10 M; 0  0.22  to 22 M; 0  0.22  to 22 M Resistance tolerance ± 5 %; ± 1 %; ± 0.5 % Temperature coefficient Rated dissipation, P70 ± 50 ppm/K; ± 25 ppm/K (2) Operating voltage, Umax. AC/DC 0.4 W 0.6 W 1.0 W 200 V 350 V 500 V Operating temperature range (2) -55 °C to 155 °C Peak permissible film temperature (2) 155 °C 155 °C 155 °C 1 min.; Uins 300 V 500 V 800 V Continuous 75 V 75 V 75 V Insulation voltage: Failure rate: FITobserved  0.1 x 10-9/h  0.1 x 10-9/h  0.1 x 10-9/h Notes • MB_ series has been merged with the related SMA series to form one series “MB_/SMA__” (2) Please refer to APPLICATION INFORMATION below Revision: 11-Jul-2018 Document Number: 28766 1 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional www.vishay.com Vishay Beyschlag APPLICATION INFORMATION The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded. Furthermore, a high level of ambient temperature or of power dissipation may raise the temperature of the solder joint, hence special solder alloys or board materials may be required to maintain the reliability of the assembly. These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime. The designer may estimate the performance of the particular resistor application or set certain load and temperature limits in order to maintain a desired stability. MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION Operation mode Standard Power Climatic category -55 °C / +125 °C / 56 days -55 °C / +155 °C / 56 days MBA/SMA 0204 0.25 W 0.4 W MBB/SMA 0207 0.4 W 0.6 W MBE/SMA 0414 0.65 W 1.0 W 125 °C 155 °C 1  to 475 k 1  to 475 k 1000 h  0.25 %  0.5 % 8000 h  0.5 %  1.0 % 225 000 h  1.5 %  1  to 1 M 1  to 1 M 1000 h  0.25 %  0.5 % 8000 h  0.5 %  1.0 % 225 000 h  1.5 %  1  to 2.4 M 1  to 2.4 M 1000 h  0.2 %  0.4 % 8000 h  0.4 %  0.8 % 225 000 h  1.2 %  Rated dissipation, P70 Applied maximum film temperature, F max. MBA/SMA 0204 MBB/SMA 0207 Max. resistance change at rated dissipation |R/R max.|, after: MBE/SMA 0414 Revision: 11-Jul-2018 Document Number: 28766 2 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional www.vishay.com Vishay Beyschlag TEMPERATURE COEFFICIENT AND RESISTANCE RANGE - Standard Products TYPE TCR ± 50 ppm/K TOLERANCE RESISTANCE (1)(2) E-SERIES ±5% 0.22 to 0.91 E24 ±1% 1 to 10 M E24; E96 ± 0.5 % 10 to 475 k E24; E192 ±1% 10 to 475 k E24; E96 ± 0.5 % 10 to 475 k E24; E192 - < 10 m; Imax. = 3 A - ±5% 0.22 to 0.91 11 M to 22 M E24 ±1% 1 to 10 M E24; E96 ±2% 0.22 to 0.91 E24 ± 0.5 % 10 to 1 M E24; E192 ±1% 10 to 1 M E24; E96 ± 0.5 % 10 to 1 M E24; E192 - < 10 m; Imax. = 5 A - ±5% 0.22 to 0.91 E24 ±1% 1 to 22 M E24; E96 ± 0.5 % 10 to 2.43 M E24; E192 ±1% 10 to 2.43 M E24; E96 ± 0.5 % 10 to 2.43 M E24; E192 MBA/SMA 0204 ± 25 ppm/K Jumper ± 50 ppm/K MBB/SMA 0207 ± 25 ppm/K Jumper ± 50 ppm/K MBE/SMA 0414 ± 25 ppm/K Notes • Resistance ranges printed in bold are preferred TCR / tolerance combinations with optimized availability (1) Resistance value to be selected from E24 series for ± 5 %, ± 2 %, from E24/E96 series for ± 1 % tolerance and from E24/E192 for ± 0.5 % tolerance (2) AEC-Q200 qualification applies to products with TCR = ± 50 ppm/K and tolerance = ± 1 % in the ranges of 10  to 301 k for MBA/SMA 0204, 10  to 7.5 M for MBB/SMA 0207, and 10  to 22 M for MBE/SMA 0414 Revision: 11-Jul-2018 Document Number: 28766 3 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional www.vishay.com Vishay Beyschlag PART NUMBER AND PRODUCT DESCRIPTION - Standard Products PART NUMBER: MBB02070C1001FCT00 M B B 0 2 0 7 0 C 1 0 0 1 F C T 0 0 TYPE/SIZE VARIANT TCR RESISTANCE TOLERANCE PACKAGING SPECIAL MBA0204 = MBA/SMA 0204 MBB0207 = MBB/SMA 0207 MBE0414 = MBE/SMA 0414 0 = neutral N = RB radial 5 mm for MBB/SMA0207 S = UB radial 2.5 mm for MBB/SMA0207 I = L0 welding joint not lacquered for MBB/SMA 0207 B = KL lacquered welding joint for MBA/SMA 0204 D = Ni wire for MBA/SMA 0204 D = ± 25 ppm/K C = ± 50 ppm/K Z = jumper 3 digit value 1 digit multiplier MULTIPLIER 7 = *10-3 8 = *10-2 9 = *10-1 0 = *100 1 = *101 2 = *102 3 = *103 4 = *104 5 = *105 6 = *106 0000 = jumper D = ± 0.5 % F=±1% G=±2% J=±5% Z = jumper CT C1 RP R2 R4 N4 00 = standard Special termination wires for MBA/SMA 0204: FE = coppered steel CA = tinned CuAg NS = tinned Ni Product Description: MBB/SMA 0207-50 1 % CT 1K0 MBB/SMA 0207 - 50 1% TYPE/SIZE TCR TOLERANCE MBA/SMA 0204 MBB/SMA 0207 MBE/SMA 0414 ± 25 ppm/K ± 50 ppm/K ± 0.5 % ± 1.0 % ± 2.0 % ± 5.0 % CT 1K0 VARIANT PACKAGING RESISTANCE RB UB L0 KL NISN AG CT C1 RP R2 R4 N4 1K0 = 1 k 51R1 = 51.1  Notes • The products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER • Standard products are not CECC approved • Radial version (RB,UB) cannot be qualified according to CECC so these can only be ordered as standard products Revision: 11-Jul-2018 Document Number: 28766 4 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional www.vishay.com Vishay Beyschlag TEMPERATURE COEFFICIENT AND RESISTANCE RANGE - CECC Approved Products TYPE TCR ± 50 ppm/K TOLERANCE RESISTANCE (1)(2) E-SERIES ±5% 0.22  to 0.91  E24 ±1% 1  to 10 M E24; E96 ± 0.5 % 10  to 475 k E24; E192 ±1% 10  to 475 k E24; E96 ± 0.5 % 10  to 475 k E24; E192 - < 10 m; Imax. = 3 A - ±5% 0.22  to 0.91  11 M to 22 M E24 ±1% 1  to 10 M E24; E96 ± 0.5 % 10  to 1 M E24; E192 ±1% 10  to 1 M E24; E96 ± 0.5 % 10  to 1 M E24; E192 - < 10 m; Imax. = 5 A - ±5% 0.22  to 0.91  E24 ±1% 1  to 22 M E24; E96 ± 0.5 % 10  to 2.43 M E24; E192 ±1% 10  to 2.43 M E24; E96 ± 0.5 % 10  to 2.43 M E24; E192 MBA/SMA 0204 ± 25 ppm/K Jumper ± 50 ppm/K MBB/SMA 0207 ± 25 ppm/K Jumper ± 50 ppm/K MBE/SMA 0414 ± 25 ppm/K Notes • Resistance ranges printed in bold are preferred TCR / tolerance combinations with optimized availability (1) Resistance value to be selected from E24 series for ± 5 %, from E24/E96 series for ± 1 % tolerance and from E24/E192 for ± 0.5 % tolerance (2) AEC-Q200 qualification applies to products with TCR = ± 50 ppm/K and tolerance = ± 1 % in the ranges of 10  to 301 k for MBA/SMA 0204, 10  to 7.5 M for MBB/SMA 0207, and 10  to 22 M for MBE/SMA 0414 Revision: 11-Jul-2018 Document Number: 28766 5 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional www.vishay.com Vishay Beyschlag PART NUMBER AND PRODUCT DESCRIPTION - CECC Approved Products PART NUMBER: MBB0207VC1001FCT00 M B B 0 2 0 7 V C 1 0 0 1 F C T 0 0 TYPE/SIZE VARIANT TCR RESISTANCE TOLERANCE PACKAGING SPECIAL MBA0204 = MBA/SMA 0204 MBB0207 = MBB/SMA 0207 MBE0414 = MBE/SMA 0414 V = CECC 06 D = ± 25 ppm/K C = ± 50 ppm/K Z = jumper 3 digit value 1 digit multiplier MULTIPLIER 7 = *10-3 8 = *10-2 9 = *10-1 0 = *100 1 = *101 2 = *102 3 = *103 4 = *104 5 = *105 6 = *106 0000 = jumper D = ± 0.5 % F=±1% J=±5% Z = jumper CT C1 RP R2 00 = standard L0 = welding joint not lacquered for MBB/SMA 0207 KL = lacquered welding joint for MBA/SMA 0204 Product Description: MBB/SMA 0207-50 1 % CECC 06 CT 1K0 MBB/SMA 0207 - 50 1% CECC 06 CT 1K0 TYPE/SIZE TCR TOLERANCE VARIANT PACKAGING RESISTANCE MBA/SMA 0204 MBB/SMA 0207 MBE/SMA 0414 ± 25 ppm/K ± 50 ppm/K ± 0.5 % ± 1.0 % ± 5.0 % CECC 06 CECC 06 L0 CECC 06 KL CT C1 RP R2 1K0 = 1 k 51R1 = 51.1  Notes • Approval is according to EN 140101-806, version A • Radial version (RB, UB) cannot be qualified according to CECC so these can only be ordered as standard products PACKAGING TYPE / SIZE MBA/SMA 0204 MBB/SMA 0207 (1) MBB/SMA 0207 UB = 2.5 mm pitch MBB/SMA 0207 RB = 5 mm pitch CODE C1 CT QUANTITY 1000 5000 RP 5000 C1 1000 CT 5000 RP 5000 N4 4000 R4 4000 N4 4000 R4 4000 C1 1000 MBE/SMA 0414 R2 2500 PACKAGING STYLE Taped acc. to IEC 60286-1 fan-folded in a box Taped acc. to IEC 60286-1 on a reel Taped acc. to IEC 60286-1 fan-folded in a box Taped acc.to IEC 60286-1 on a reel Taped acc. to IEC 60286-2 fan-folded in a box Taped acc. to IEC 60286-2 on a reel Taped acc. to IEC 60286-2 fan-folded in a box Taped acc. to IEC 60286-2 on a reel Taped acc. to IEC 60286-1 fan-folded in a box Taped acc. to IEC 60286-1 on a reel WIDTH PITCH 53 mm 5 mm 53 mm 5 mm 53 mm 5 mm 53 mm 5 mm - 12.7 mm DIMENSIONS 184 mm x 75 mm x 42 mm 330 mm x 75 mm x 55 mm 242 mm x 76 mm x 86 mm 184 mm x 74 mm x 42 mm 260 mm x 78 mm x 31 mm 260 mm x 75 mm x 114 mm 324 mm x 77 mm x 82 mm 315 mm x 76 mm x 86 mm 298 mm x 75 mm x 86 mm 330 mm x 262 mm x 45 mm 330 mm x 253 mm x 48 mm 330 mm x 262 mm x 45 mm - 12.7 mm 330 mm x 253 mm x 48 mm 374 mm x 84 mm x 47 mm 63 mm 5 mm 315 mm x 80 mm x 90 mm Note (1) Manufacturing at different production locations may involve use of different size box Revision: 11-Jul-2018 Document Number: 28766 6 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional www.vishay.com Vishay Beyschlag DESCRIPTION ASSEMBLY Production is strictly controlled and follows an extensive set of instructions established for reproducibility. A homogeneous film of metal alloy is deposited on a high grade ceramic body and conditioned to achieve the desired temperature coefficient. Plated steel termination caps are firmly pressed on the metallized rods. A special laser is used to achieve the target value by smoothly cutting a helical groove in the resistive layer without damaging the ceramics. Connecting wires of electrolytic copper plated with 100 % pure tin are welded to the termination caps. Alternative termination wires available e.g. weldable wire (MBA/SMA 0204 only). The resistor elements are covered by a light blue protective coating designed for electrical, mechanical and climatic protection. Four or five color code rings designate the resistance value and tolerance in accordance with IEC 60062. The result of the determined production is verified by an extensive testing procedure performed on 100 % of the individual resistors. Only accepted products are stuck directly on the adhesive tapes in accordance with IEC 60286-1 or for the radial versions in accordance to IEC 60286-2. The resistors are suitable for processing on automatic insertion equipment and cutting and bending machines. Excellent solderability is proven, even after extended storage. They are suitable for automatic soldering using wave or dipping. The resistors are completely lead (Pb)-free, the pure tin plating provides compatibility with lead (Pb)-free and lead-containing soldering processes. The immunity of the plating against tin whisker growth, in compliance with IEC 60068-2-82, has been proven under extensive testing. The encapsulant is resistant to cleaning solvent specified in IEC 60115-1 (3). The suitability of conformal coatings, if applied, shall be qualified by appropriate means to ensure the long-term stability of the whole system. All products comply with GADSL (1) and the IEC 62474 (2) list of legal restrictions on hazardous substances. This includes full compliance with the following directives: • 2000/53/EC End of Vehicle Life Directive (ELV) and Annex II (ELVII) • 2011/65/EU Restriction of the use of Hazardous Substances Directive (RoHS) • 2012/19/EU Waste Electrical and Electrical Equipment Directive (WEEE) MATERIALS Vishay acknowledges the following systems for the regulation of hazardous substances: • IEC 62474, Material Declaration for Products of and for the Electrotechnical Industry, with the list of declarable substances given therein (1) • The Global Automotive Declarable Substance List (GADSL) (2) • The REACH regulation (1907/2006/EC) and the related list of substances with very high concern (SVHC) (3) for its supply chain The products do not contain any of the banned substances as per IEC 62474, GADSL, or the SVHC list, see www.vishay.com/how/leadfree. Hence the products fully comply with the following directives: • 2000/53/EC End-of-Life Vehicle Directive (ELV) and Annex II (ELV II) • 2011/65/EU Restriction of the Use of Hazardous Substances Directive (RoHS) with amendment 2015/863/EU • 2012/19/EU Waste Electrical and Electronic Equipment Directive (WEEE) Vishay pursues the elimination of conflict minerals from its supply chain, see the Conflict Minerals Policy at www.vishay.com/doc?49037. APPROVALS The resistors (CECC version) are approved within the IECQ-CECC Quality Assessment System for Electronic Components to the detail specification EN 140101-806 which refers to EN 60115-1 and EN 140100 and the variety of environmental test procedures of the IEC 60068 series. Conformity is attested by the use of the CECC logo ( ) as the Mark of Conformity on the package label for the CECC version. Vishay Beyschlag has achieved “Approval of Manufacturer” in accordance with IEC QC 001002-3, clause 2. The release certificate for “Technology Approval Schedule” in accordance with CECC 240001 based on IEC QC 001002-3, clause 6 is granted for the Vishay Beyschlag manufacturing process. RELATED PRODUCTS For a correlated range of precision TCR and tolerance specifications see the datasheet: • “Precision Thin Film Leaded Resistors”, www.vishay.com/doc?28767 For products approved to EN 140101-806, version E, with established reliability and failure rate level E7 (Quality factor Q = 0.1), see the datasheet: • “Established Reliability Thin Film Leaded Resistors”, www.vishay.com/doc?28768 Notes (1) Global Automotive Declarable Substance List, see www.gadsl.org (2) CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade organisation representing the information and communications technology and consumer electronics), see www.digitaleurope.org/SearchResults.aspx?Search=eicta. All products comply with the IEC 62474, Material Declaration for Products of and for the Electrotechnical Industry (3) Other cleaning solvents with aggressive chemicals should be evaluated in actual cleaning process for their suitability Revision: 11-Jul-2018 Document Number: 28766 7 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional www.vishay.com Vishay Beyschlag Power in % FUNCTIONAL PERFORMANCE 100 Standard Mode Power Mode 80 60 40 20 0 -55 0 50 100 70 125 155 180 Ambient Temperature in °C Temperature Rise Tr Derating 80 K 60 40 MBE/SMA 0414 MBB/SMA 0207 MBA/SMA 0204 20 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 W 1 Load P Temperature Rise Revision: 11-Jul-2018 Rise of surface temperature Document Number: 28766 8 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional Pulse Load Pmax. www.vishay.com Vishay Beyschlag MBE/SMA 0414 MBB/SMA 0207 MBA/SMA 0204 100 W 10 1 0.1 10 µs 100 µs 1 ms 10 ms 100 ms 10 s 1s Pulse Duration ti Maximum pulse load, single pulse; for permissible resistance change equivalent to 8000 h operation. Continuous Pulse Load Pmax. Single Pulse MBE/SMA 0414 MBB/SMA 0207 MBA/SMA 0204 100 W 10 1 0.1 10 µs 100 µs 1 ms 10 ms 100 ms 10 s 1s Pulse Duration ti Maximum pulse load, continuous pulses; for permissible resistance change equivalent to 8000 h operation. Pulse Voltage U max. Continuous Pulse MBE/SMA 0414 MBB/SMA 0207 MBA/SMA 0204 1 kV 100 V 10 µs 100 µs 1 ms 10 ms 100 ms 1s 10 s Pulse Duration ti Maximum pulse voltage, single and continuous pulses; for permissible resistance change equivalent to 8000 h operation. Pulse Voltage Revision: 11-Jul-2018 Document Number: 28766 9 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional Test Voltage www.vishay.com Vishay Beyschlag 10 kV 1 kV 100 V MBE/SMA 0414 MBB/SMA 0207 MBA/SMA 0204 10 V 10 Ω 100 Ω 1 kΩ 10 kΩ 100 kΩ 1 MΩ 10 MΩ Resistance Value R Pulse load rating in accordance with IEC 60115-1, 4.27; 1.2 µs/50 µs; 5 pulses at 12 s intervals; for permissible resistance change (0.5 % R + 0.05 Ω) Test Voltage 1.2/50 Pulse 10 kV 1 kV MBE/SMA 0414 MBB/SMA 0207 MBA/SMA 0204 100 V 10 V 10 Ω 100 Ω 1 kΩ 10 kΩ 100 kΩ 1 MΩ 10 MΩ Resistance Value R Pulse load rating in accordance with IEC 60115-1, 4.27; 10 µs/700 µs; 10 pulses at 1 minute intervals; for permissible resistance change (0.5 % R + 0.05 Ω) Current Noise A1 10/700 Pulse 1 µV/V 0.1 MBE/SMA 0414 MBB/SMA 0207 MBA/SMA 0204 0.01 100 1K 10K 100K 1M Ω 10M Resistance Value R Current noise - A1 in accordance with IEC 60195 Revision: 11-Jul-2018 Document Number: 28766 10 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional www.vishay.com Vishay Beyschlag TESTS PROCEDURES AND REQUIREMENTS All tests are carried out in accordance with the following specifications: • EN 60115-1, generic specification (includes tests) • EN 140100, sectional specification (includes schedule for qualification approval) • EN 140101-806 (successor of CECC 40101-806), detail specification (includes schedule for conformance inspection) The test and requirements table contains only the most important tests. For the full test schedule refer to the documents listed above. The tests are carried out in accordance with IEC 60068-2-xx test method and under standard atmospheric conditions in accordance with IEC 60068-1, 5.3.  Climatic category LCT / UCT / 56 (rated temperature range: lower category temperature, upper category temperature; damp heat, steady state, test duration: 56 days) is valid. Unless otherwise specified the following values apply: • Temperature: 15 °C to 35 °C • Relative humidity: 45 % to 75 % • Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar). For performing some of the tests, the components are mounted on a test board in accordance with IEC 60115-1, 4.31. In Test Procedures and Requirements table, only the tests and requirements are listed with reference to the relevant clauses of IEC 60115-1 and IEC 60068-2-xx test methods. A short description of the test procedure is also given. TEST PROCEDURES AND REQUIREMENTS PROCEDURE IEC 60115-1 CLAUSE IEC 60068-2 TEST METHOD TEST 4.5 4.7 - Resistance Voltage proof Temperature coefficient 4.8 - 4.13 - Short time overload 4.16 21 (Ua1) 21 (Ub) 21 (Uc) Robustness of terminations 4.17 20 (Ta) Solderability 4.18.2 20 (Tb) Resistance to soldering heat 4.19 14 (Na) Rapid change of temperature 4.22 6 4.23 4.23.2 2 (Ba) 4.23.3 30 (Db) 4.23.4 1 (Aa) 4.23.5 13 (M) 4.23.6 30 (Db) 4.23.7 Revision: 11-Jul-2018 Vibration Climatic sequence: Dry heat Damp heat, cyclic Cold Low air pressure Damp heat, cyclic DC load Stability for product types: MBA/SMA 0204 MBB/SMA 0207 MBE/SMA 0414 URMS = Uins; 60 s At (20 / -55 / 20) °C and (20 / 155 / 20) °C Room temperature; U = 2.5 x P 70 x R or U = 2 x Umax.; 5 s Tensile, bending, and torsion +235 °C; 2 s; solder bath method; SnPb40 +245 °C; 3 s; solder bath method; SnAg3Cu0.5 Unmounted components; (260 ± 5) °C; (10 ± 1) s 30 min at -55 °C 30 min at 155 °C 5 cycles MBA/SMA 0204: 500 cycles MBB/SMA 0207: 200 cycles MBE/SMA 0414: 100 cycles 10 sweep cycles per direction; 10 Hz to 2000 Hz 1.5 mm or 200 m/s2 REQUIREMENTS PERMISSIBLE CHANGE (R max.) STABILITY STABILITY STABILITY CLASS 0.5 CLASS 1 CLASS 2 1  to 332 k 0.22  to < 1  > 332 k 1  to 1 M 0.22  to < 1  > 1 M 1  to 2.43 M 0.22  to < 1  > 2.43 M ± 5 % R; ± 1 % R; ± 0.5 % R No flashover or breakdown ± 50 ppm/K; ± 25 ppm/K ± (0.1 % R + 0.01 ) ± (0.25 % R + 0.05 ) no visible damage no visible damage ± 0.5 % R no visible damage ± (0.1 % R + 0.01 ) ± (0.25 % R + 0.05 ) ± 0.5 % R Good tinning (> 95 % covered, no visible damage) ± (0.1 % R + 0.01 ) ± (0.25 % R + 0.05 ) no visible damage no visible damage ± 0.5 % R no visible damage ± (0.1 % R + 0.01 ) ± (0.25 % R + 0.05 ) ± 0.5 % R ± (0.5 % R + 0.05 ) ± (0.5 % R + 0.05 ) ± (0.1 % R + 0.01 ) ± (0.25 % R + 0.05 ) 155 °C; 16 h 55 °C; 24 h;  90 % to 100 % RH; 1 cycle -55 °C; 2 h 8.5 kPa; 2 h; 15 °C to 35 °C 55 °C; 5 days; ± (0.5 % R + 0.05 )  95 % to 100 % RH; 5 cycles no visible damage apply rated power for 1 min ± (1 % R + 0.05 ) no visible damage ± (0.5 % R + 0.05 ) ± 0.5 % R ± 2 % R no visible damage Document Number: 28766 11 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional www.vishay.com Vishay Beyschlag TEST PROCEDURES AND REQUIREMENTS PROCEDURE IEC 60115-1 CLAUSE 4.24 IEC 60068-2 TEST METHOD TEST 78 (Cab) Damp heat, steady state - Endurance at 70 °C: power operation mode Stability for product types: 4.25.1 - 4.25.3 - Endurance at 70 °C: standard operation mode Endurance at 125 °C and 155 °C 4.29 45 (XA) Component solvent resistance 4.40 - Electrostatic discharge (human body model) MBA/SMA 0204 MBB/SMA 0207 MBE/SMA 0414 (40 ± 2) °C; 56 days; (93 ± 3) % RH U = P 70 x R or U = Umax.; 1.5 h on; 0.5 h off 70 °C; 1000 h 70 °C; 8000 h U = P 70 x R or U = Umax.; 1.5 h on; 0.5 h off 70 °C; 1000 h 70 °C; 8000 h REQUIREMENTS PERMISSIBLE CHANGE (R max.) STABILITY STABILITY STABILITY CLASS 0.5 CLASS 1 CLASS 2 1  to 332 k 0.22  to < 1  > 332 k 1  to 1 M 0.22  to < 1  > 1 M 1  to 2.43 M 0.22  to < 1  > 2.43 M ± (0.5 % R + 0.05 ) ± (1 % R + 0.05 ) ± 2 % R ± (0.5 % R + 0.05 ) (1) ± (1 % R + 0.05 ) (2) ± 0.5 % R ± 1 % R ± (0.25 % R + 0.05 ) (3) ± (0.5 % R + 0.05 ) (4) ± 0.25 % R ± 0.5 % R 125 °C; 1000 h ± (0.25 % R + 0.05 ) ± (0.5 % R + 0.05 ) ± 1 % R 155 °C; 1000 h ± (0.5 % R + 0.05 ) ± 2 % R Isopropyl alcohol (used in industrial application) +23 °C; toothbrush method IEC 61340-3-1; 3 pos. + 3 neg. MBA/SMA 0204: 2 kV MBB/SMA 0207: 4 kV MBE/SMA 0414: 6 kV ± (1 % R + 0.05 ) Marking legible; no visible damage ± (0.5 % R + 0.05 ) Notes (1) ± (0.4 % R + 0.05 ) for MBE/SMA 0414 (2) ± (0.8 % R + 0.05 ) for MBE/SMA 0414 (3) ± (0.2 % R + 0.05 ) for MBE/SMA 0414 (4) ± (0.4 % R + 0.05 ) for MBE/SMA 0414 Revision: 11-Jul-2018 Document Number: 28766 12 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional www.vishay.com Vishay Beyschlag DIMENSIONS D d L I M DIMENSIONS - Leaded resistor types, mass and relevant physical dimensions Lmax. (mm) Dmax. (mm) TYPE dnom. (mm) lmin. (mm) Mmin. (mm) MASS (mg) MBA/SMA 0204 1.6 3.6 0.5 29.0 5.0 125 MBB/SMA 0207 (1) 2.5 6.5 0.6 28.0 10.0 (1) 220 15.0 700 MBE/SMA 0414 4.2 11.9 0.8 31.0 Note (1) For 7.5  M < 10.0 mm, use version MBB/SMA 0207 ... L0 (welding joint not lacquered) MBB/SMA 0207 WITH RADIAL TAPING LEAD SPACING (UB = 2.5 mm), SIZE 0207 P DIMENSIONS in millimeters Insulated C 3 max. H1 F H L Pitch of components P 12.7 ± 1.0 Lead spacing F 2.5 + 0.6 / - 0.1 Width of carrier tape W 18.0 + 1.0 / - 0.5 Body to hole center H 18.0 ± 2.0 Height for cutting (max.) L 11 Height for bending C 2.5 + 0 / - 0.5 Height for insertion (max.) H1 32 P 12.7 ± 1.0 W Direction of unreeling LEAD SPACING (RB = 5.0 mm), SIZE 0207 P Insulated C H 3 max. H1 L DIMENSIONS in millimeters F H0 W Pitch of components Lead spacing F 5.0 + 0.6 / - 0.1 Width of carrier tape W 18.0 + 1.0 / - 0.5 Body to hole center H 18.0 ± 2.0 Lead crimp to hole center H0 16.0 ± 0.5 Height for cutting (max.) L 11 Height for bending C 2.5 + 0 / - 0.5 Height for insertion (max.) H1 32 Direction of unreeling Revision: 11-Jul-2018 Document Number: 28766 13 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional www.vishay.com Vishay Beyschlag HISTORICAL 12NC INFORMATION • The resistors had a 12-digit numeric code starting with 2312 Resistance Decade RESISTANCE DECADE LAST DIGIT 0.1  to 0.999  7 1  to 9.99  8 10  to 99.9  9 100  to 999  1 • The subsequent 4 digits indicated the resistor type, specification and packaging; see the 12NC table • The remaining 4 digits indicated the resistance value: - the first 3 digits indicated the resistance value - the last digit indicated the resistance decade in accordance with resistance decade table 1 k to 9.99 k 2 10 k to 99.9 k 3 100 k to 999 k 4 1 M to 9.99 M 5 10 M to 99.9 M 6 Historical 12NC Example The 12NC code of a MBA 0204 resistor, value 47.5 k and TCR 50 with ± 1 % tolerance, supplied on bandolier in a box of 5000 units was: 2312 905 14753. HISTORICAL 12NC - Resistor Type and Packaging 2312 ... ..... DESCRIPTION TYPE AMMOPACK TCR ± 50 ppm/K MBA 0204 ± 25 ppm/K Jumper ± 50 ppm/K MBB 0207 ± 25 ppm/K Jumper ± 50 ppm/K MBE 0414 ± 25 ppm/K Revision: 11-Jul-2018 REEL TOL. C1 1000 units CT 5000 units R1 1000 units R2 2500 units RP 5000 units ±5% 900 3.... 905 3.... 700 3.... - 805 3.... 805 1.... ±1% 900 1.... 905 1.... 700 1.... - ± 0.5 % 900 5.... 905 5.... 700 5.... - 805 5.... ±1% 901 1.... 906 1.... 701 1.... - 806 1.... ± 0.5 % 901 5.... 906 5.... 701 5.... - 806 5.... - 900 90001 905 90001 700 90001 - 805 90001 ±5% 910 3.... 915 3.... 710 3.... - 815 3.... ±1% 910 1.... 915 1.... 710 1.... - 815 1.... ± 0.5 % 910 5.... 915 5.... 710 5.... - 815 5.... 816 1.... ±1% 911 1.... 916 1.... 711 1.... - ± 0.5 % 911 5.... 916 5.... 711 5.... - 816 5.... - 910 90001 915 90001 710 90001 - 815 90001 ±5% 920 3.... - - 825 3.... - ±1% 920 1.... - - 825 1.... - ± 0.5 % 920 5.... - - 825 5.... - ±1% 921 1.... - - 826 1.... - ± 0.5 % 921 5.... - - 826 5.... - Document Number: 28766 14 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000