MBR1060/45

MBR1035 THRU MBR1060 SCHOTTKY RECTIFIER Reverse Voltage - 35 to 60 Volts FEATURES TO-220AC 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.415 (10.54) MAX. 0.055 (1.27) DIA. 0.148 (3.74) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.560 (14.22) 0.530 (13.46) 0.410 (10.41) 0.390 (9.91) 0.350 (8.89) 0.635 (16.13) 0.330 (8.38) 0.625 (15.87) 1.148 (29.16) PIN 1 2 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.160 (4.06) 0.140 (3.56) 0.560 (14.22) 0.530 (13.46) 0.105 (2.67) 0.095 (2.41) Forward Current - 10.0 Amperes ♦ Plastic package has Underwriters Laboratory Flammability Classifications 94V-0 ♦ Metal silicon junction, majority carrier conduction ♦ Low power loss, high efficiency ♦ High current capability, low forward voltage drop ♦ High surge capability ♦ For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications ♦ Guardring for overvoltage protection ♦ High temperature soldering guaranteed: 250°C/10 seconds, 0.25" (6.35mm) from case MECHANICAL DATA 0.037 (0.94) 0.027 (0.68) 0.016 (0.41) 0.014 (0.35) 0.205 (5.20) 0.195 (4.95) PIN 1 PIN 2 PIN 3 CASE Dimensions in inches and (millimeters) Case: JEDEC TO-220AC molded plastic body Terminals: Leads solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting Position: Any Mounting Torque: 5 in. - lbs. max. Weight: 0.08 ounces, 1.81 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS MBR1035 MBR1045 MBR1050 MBR1060 UNITS Maximum repetitive peak reverse voltage VRRM 35 45 50 60 Volts Maximum working peak reverse voltage VRWM 35 45 50 60 Volts VDC 35 45 50 60 Volts Maximum DC blocking voltage Maximum average forward rectified current I(AV) 10.0 Amps Peak repetitive forward current at TC=135°C (square wave 20 KHZ) IFRM 20.0 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 150.0 Amps Peak repetitive reverse surge current (NOTE 1) IRRM Voltage rate of change (rated VR) dv/dt (SEE FIG. 1) Maximum instantaneous forward voltage at (NOTE 2) IF=10A, TC=25°C IF=10A, TC=125°C IF=20A, TC=25°C IF=20A, TC=125°C Maximum instantaneous reverse current at rated DC blocking voltage TC= 25°C (NOTE 2) TC=125°C Maximum thermal resistance, junction to case Operating junction temperature range Storage temperature range NOTES: (1) 2.0µs pulse width, f=1.0 KHZ (2) Pulse test: 300µs pulse width, 1% duty cycle VF 1.0 0.5 10,000 0.57 0.84 0.72 Amps Vµs 0.80 0.70 0.95 0.85 Volts IR 0.10 15.0 mA RΘJC 2.0 °C/W TJ -65 to +150 °C TSTG -65 to +175 °C RATINGS AND CHARACTERISTIC CURVES MBR1035 THRU MBR1060 FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG. 1 - FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT, AMPERES 12 RESISTIVE OR INDUCTIVE LOAD 10 8 6 4 150 125 100 75 50 25 0.1 2 0 PEAK FORWARD SURGE CURRENT, AMPERES 175 1 0 50 100 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 20 PULSE WIDTH=300µs 1% DUTY CYCLE TJ=150°C TJ=25°C 1 0.1 INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES 50 10.0 MBR1035 - MBR1045 MBR1050 & MBR1060 10 FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS TJ=125°C 1 0.1 TJ=75°C 0.01 TJ=25°C MBR1035 - MBR1045 MBR1050 & MBR1060 0.01 0 0.1 0.2 0.3 0.4 0.5 100 150 CASE TEMPERATURE, °C INSTANTANEOUS FORWARD CURRENT, AMPERES 10 NUMBER OF CYCLES AT 60 HZ MBR1035 - MBR1045 MBR1050 & MBR1060 0.6 0.7 0.8 0.9 1.0 0.001 0 1.1 1.2 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE JUNCTION CAPACITANCE, pF FIG. 5 - TYPICAL JUNCTION CAPACITANCE 4,000 TJ=25°C f=1.0 MHZ Vsig=50mVp-p 1,000 MBR1035 - MBR1045 MBR1050 & MBR1060 100 0.1 1 10 REVERSE VOLTAGE, VOLTS 100 TRANSIENT THERMAL IMPEDANCE, °C/W 100 10.0 1 0.1 0.01 0.1 1 t, PULSE DURATION, sec. 10 100