MBRF1045HE3/45

MBR10xx, MBRF10xx, MBRB10xx www.vishay.com Vishay General Semiconductor Schottky Barrier Rectifier TO-220AC FEATURES ITO-220AC • Power pack • Low power loss, high efficiency • Low forward voltage drop • High forward surge capability • High frequency operation 2 2 MBR1045 MBR1060 MBRF1045 MBRF1060 1 PIN 1 1 PIN 1 CASE PIN 2 PIN 2 D2PAK (TO-263AB) K • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) • Solder bath temperature 275 °C maximum, 10 s, per JESD 22-B106 (for TO-220AC and ITO-220AC package) • AEC-Q101 qualified available (for ITO-220AC and D2PAK (TO-263AB) package) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS 2 1 MBRB1045 MBRB1060 PIN 1 PIN 2 DESIGN SUPPORT TOOLS K HEATSINK click logo to get started Models Available PRIMARY CHARACTERISTICS IF(AV) 10 A VRRM 45 V, 60 V IFSM 150 A VF 0.57 V, 0.70 V TJ max. 150 °C Package TO-220AC, ITO-220AC, D2PAK (TO-263AB) Circuit configuration Single For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, DC/DC converters, and polarity protection application. MECHANICAL DATA Case: TO-220AC, ITO-220AC, D2PAK (TO-263AB) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/NHE3_X - RoHS-compliant, AEC-Q101 qualified (“_X” denotes revision code, e.g. A, B, ...) Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: as marked Mounting Torque: 10 in-lbs maximum        MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) SYMBOL MBR1045 MBR1060 Maximum repetitive peak reverse voltage VRRM 45 60 Maximum average forward rectified current (fig. 1) IF(AV) 10 Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 150 Peak repetitive reverse current at tp = 2.0 µs, 1 kHz IRRM Voltage rate of change (rated VR) dV/dt 10 000 TJ -65 to +150 TSTG -65 to +175 VAC 1500 PARAMETER Operating junction and storage temperature range Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min 1.0 UNIT V A 0.5 A V/μs °C V Revision: 19-Sep-2018 Document Number: 88669 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBR10xx, MBRF10xx, MBRB10xx www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL Maximum instantaneous forward voltage Maximum instantaneous reverse current at DC blocking voltage VF IR (1) (2) MBR1045 MBR1060 IF = 10 A TJ = 25 °C - 0.80 IF = 10 A TJ = 125 °C 0.57 0.70 IF = 20 A TJ = 25 °C 0.84 0.95 IF = 20 A TJ = 125 °C 0.72 0.85 TEST CONDITIONS Rated VR TJ = 25 °C 0.10 TJ = 125 °C 15 UNIT V mA Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: pulse width  40 ms THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance from junction to case SYMBOL MBR MBRF MBRB UNIT RJC 2.0 4.0 2.0 °C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AC MBR1045-E3/45 1.80 45 50/tube Tube ITO-220AC MBRF1045-E3/45 1.94 45 50/tube Tube TO-263AB MBRB1045-E3/45 1.33 45 50/tube Tube TO-263AB MBRB1045-E3/81 1.33 81 800/reel Tape and reel ITO-220AC MBRF1045HE3_A/P (1) 1.94 P 50/tube Tube TO-263AB MBRB1045HE3_B/P (1) 1.33 P 50/tube Tube TO-263AB MBRB1045HE3_B/I (1) 1.33 I 800/reel Tape and reel Note (1) AEC-Q101 qualified, available in ITO-220AC and D2PAK (TO-263AB) package Revision: 19-Sep-2018 Document Number: 88669 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBR10xx, MBRF10xx, MBRB10xx www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 12 100 Instantenous Reverse Current (mA) Average Forward Current (A) Resistive or Inductive Load 10 8 6 4 2 MBR1045 MBR1060 1 TJ = 75 °C 0.1 TJ = 25 °C MBR1045 MBR1060 0.01 0.001 0 0 50 100 150 0 20 40 60 80 Case Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics TJ = TJ max. 8.3 ms Single half sine-wave Junction Capacitance (pF) 150 125 100 75 50 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1000 MBR1045 MBR1060 25 100 100 10 1 0.1 0.1 1 10 100 Number of Cycles at 60 Hz Reverse Voltage (V) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 5 - Typical Junction Capacitance 100 100 TJ = 150 °C 10 Transient Thermal Impedance (°C/W) Instantaneous Forward Current (A) 100 10 000 175 Peak Forward Surge Current (A) TJ = 125 °C 10 Pulse Width = 300 µs 1 % Duty Cycle 1 TJ = 25 °C 0.1 MBR1045 MBR1060 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 10 1 0.1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Transient Thermal Impedance Revision: 19-Sep-2018 Document Number: 88669 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBR10xx, MBRF10xx, MBRB10xx www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeter TO-220AC 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) DIA. 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) PIN 1 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 2 0.160 (4.06) 0.140 (3.56) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.560 (14.22) 0.530 (13.46) PIN 1 CASE PIN 2 0.105 (2.67) 0.095 (2.41) 0.037 (0.94) 0.027 (0.68) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) ITO-220AC 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.404 (10.26) 0.384 (9.75) 0.076 (1.93) REF. 0.076 (1.93) REF. 45° REF. 0.600 (15.24) 0.580 (14.73) 0.671 (17.04) 0.651 (16.54) PIN 1 2 7° REF. 0.140 (3.56) DIA. 0.125 (3.17) DIA. 7° REF. 0.350 (8.89) 0.330 (8.38) 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.025 (0.64) 0.015 (0.38) 0.057 (1.45) 0.045 (1.14) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) D2PAK (TO-263AB) 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.135 (3.43) DIA. 0.122 (3.08) DIA. 7° REF. 0.110 (2.79) 0.100 (2.54) 0.028 (0.71) 0.020 (0.51) Mounting Pad Layout 0.42 (10.66) min. 0.055 (1.40) 0.045 (1.14) K 0.33 (8.38) min. 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0.670 (17.02) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.15 (3.81) min. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) Revision: 19-Sep-2018 Document Number: 88669 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000