MDP16012K20JE04

MDP 01, 03, 05 www.vishay.com Vishay Dale Thick Film Resistor Networks, Dual-In-Line, Molded DIP FEATURES • Isolated, bussed, and dual terminator schematics available Available • 0.160" (4.06 mm) maximum seated height and rugged, molded case construction • Thick film resistive elements • Low temperature coefficient (-55 °C to +125 °C) ± 100 ppm/°C Available • Reduces total assembly costs • Compatible with automatic inserting equipment • Wide resistance range (10  to 2.2 M) • Uniform performance characteristics • Available in tube pack • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS POWER RATING GLOBAL RESISTANCE ELEMENT (1) TOLERANCE (3) MODEL/ SCHEMATIC RANGE NO. OF P70 °C ±%  PINS W 01 0.125 10 to 2.2M MDP 14 03 0.250 10 to 2.2M 1, 2, 5 05 0.125 Consult factory 01 0.125 10 to 2.2M MDP 16 03 0.250 10 to 2.2M 1, 2, 5 05 0.125 Consult factory Notes (1) For resistor power ratings at +25 °C see derating curves (2) Tighter tracking available (3) ± 2 % standard, ± 1 %, and ± 5 % available TEMPERATURE COEFFICIENT (-55 °C to +125 °C) ± ppm/°C 100 100 TCR TRACKING (2) (-55 °C to +125 °C) ± ppm/°C 50 50 100 50 50 100 WEIGHT g 1.3 1.5 GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MDP1403100RGD04 (preferred part numbering format) M GLOBAL MODEL MDP D P 1 4 0 PIN COUNT SCHEMATIC 14 = 14 pin 16 = 16 pin 01 = Bussed 03 = Isolated 00 = Special 3 1 0 RESISTANCE VALUE R= K = k M = M 10R0 = 10  680K = 680 k 1M00 = 1.0 M 0000 = 0  Jumper 0 R G TOLERANCE CODE F=±1% G=±2% J=±5% S = Special Z = 0  Jumper D 0 PACKAGING SPECIAL E04 = Lead (Pb)-free, tube D04 = Tin/lead, tube Blank = Standard (Dash Number) (up to 3 digits) From 1 to 999 as applicable Historical Part Number Example: MDP1403101G (will continue to be accepted) MDP 14 03 101 HISTORICAL MODEL PIN COUNT SCHEMATIC RESISTANCE VALUE 4 G D04 TOLERANCE CODE PACKAGING New Global Part Numbering: MDP1405121CGD04 (preferred part numbering format) M GLOBAL MODEL MDP D P 1 4 0 PIN COUNT SCHEMATIC 14 = 14 pin 16 = 16 pin 05 = Dual terminator 5 1 2 1 RESISTANCE VALUE 3 digit impedance code, followed by alpha modifier (see Impedance Codes table) C G TOLERANCE CODE F=±1% G=±2% J=±5% Historical Part Number Example: MDP1405221271G (will continue to be accepted) MDP 14 05 221 271 HISTORICAL MODEL D 0 4 PACKAGING SPECIAL E04 = Lead (Pb)-free, tube D04 = Tin/lead, tube Blank = Standard (Dash Number) (up to 3 digits) From 1 to 999 as applicable G D04 PIN COUNT SCHEMATIC RESISTANCE VALUE 1 RESISTANCE VALUE 2 TOLERANCE CODE PACKAGING Note • For additional information on packaging, refer to the Through-Hole Network Packaging document (www.vishay.com/doc?31542). Revision: 12-Sep-13 Document Number: 31511 1 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MDP 01, 03, 05 www.vishay.com Vishay Dale DIMENSIONS in inches (millimeters) 0.310 ± 0.010 (7.87 ± 0.254) 0.120 ± 0.005 (3.05 ± 0.127) A ± 0.010 (0.254) 0.250 ± 0.005 (6.35 ± 0.127) 0.030 (0.762) Typ. Pin #1 Identification 0.075 ± 0.015 (1.90 ± 0.381) Pin #1 0.100 ± 0.010 (2.54 ± 0.254) Non-Accumulative Tol. "C" Spaces GLOBAL MODEL 0.010 + 0.005 - 0.002 (0.254 + 0.127 - 0.051) 0.130 + 0.015 - 0.010 (3.30 + 0.381 - 0.254) 0.018 ± 0.003 (0.457 ± 0.076) B ± 0.010 (0.254) 0.290 Min. 0.320 Nom. 0.360 Max. (7.37 Min. 8.13 Nom. 9.14 Max.) 0.050 ± 0.005 (1.27 ± 0.127) A B C MDP 14 0.750 (19.05) 0.600 (15.24) 6 MDP 16 0.850 (21.59) 0.700 (17.78) 7 TECHNICAL SPECIFICATIONS PARAMETER UNIT MDP14 Package Power Rating (Maximum at +70 °C) W 1.73 Voltage Coefficient of Resistance Veff Dielectric Strength MDP16 1.92 < 50 ppm typical VAC 200 Insulation Resistance  > 10 000M minimum Operating Temperature Range °C -55 to +125 Storage Temperature Range °C -55 to +150 MECHANICAL SPECIFICATIONS Marking Resistance to Solvents Permanency testing per MIL-STD-202, method 215 Solderability Per MIL-STD-202, method 208E Body Molded epoxy Terminals Solder plated leads Weight 14 pin = 1.3 g; 16 pin = 1.5 g IMPEDANCE CODES CODE R1 () R2 () CODE R1 () R2 () 500B 82 130 141A 270 270 750B 120 200 181A 330 390 800C 130 210 191A 330 470 990A 160 260 221B 330 680 101C 180 240 281B 560 560 111C 180 270 381B 560 1.2K 121B 180 390 501C 620 2.7K 121C 220 270 102A 1.5K 3.3K 131A 220 330 202B 3K 6.2K Note • For additional impedance codes, refer to the Dual Terminator Impedance Code Table document (www.vishay.com/doc?31530). Revision: 12-Sep-13 Document Number: 31511 2 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MDP 01, 03, 05 www.vishay.com Vishay Dale CIRCUIT APPLICATIONS 01 Schematic 13 and 15 resistors with one pin common The MDPXX01 circuit provides a choice of 13 and 15 nominally equal resistors, each connected between a common pin (14 and 16) and a discrete PC board pin. Commonly used in the following applications: • • • • • • • • • MOS/ROM Pull-up/Pull-down • Open Collector Pull-up • “Wired OR” Pull-up • Power Driven Pull-up MDP1401 Pin #1 MDP1601 • TTL Input Pull-down • Digital Pulse Squaring • TTL Unused Gate Pull-up • High Speed Parallel Pull-up 03 Schematic 7 or 8 isolated resistors The MDPXX03 provides a choice of 7 and 8 nominally equal resistors, each resistor isolated from all others and wired directly across. Commonly used in the following applications: • “Wired OR” Pull-up • Power Driven Pull-up • Powergate Pull-up • Line Termination MDP1403 Pin #1 MDP1603 • Long-line Impedance Balancing • LED Current Limiting • ECL Output Pull-down • TTL Input Pull-down 05 Schematic TTL dual-line terminator; pulse squaring R1 R1 R2 R1 R2 R1 R2 R1 R2 Pin #1 R1 R2 R1 R2 R2 R1 R1 R1 R2 R2 R2 R2 R1 R1 R1 R1 R2 R2 The MDPXX05 circuit contains 12 and 14 series pair of resistors. Each series pair is connected between ground and a common line. The junction of these resistor pairs is connected to the input terminals. The 05 circuits are designed for TTL dual-line termination and pulse squaring.  R2 MDP1405, MDP1605 Note • Standard E24 resistance values stocked. Consult factory. Power Rating (W) DERATING 3.00 2.70 16 Pin Package 14 Pin Package Single Resistor 0.380 0.190 - 50 03 01 and 05 + 25 + 70 + 125 + 150 Ambient Temperature °C Revision: 12-Sep-13 Document Number: 31511 3 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MDP 01, 03, 05 www.vishay.com Vishay Dale PERFORMANCE CONDITIONS MAX. R (TYPICAL TEST LOTS) 1.5 rated power, applied 1.5 h “ON” and 0.5 h “OFF” for 100 h ± 4 h at +25 °C ambient temperature ± 0.50 % R 5 cycles between -65 °C and +125 °C ± 0.50 % R 2.5 x rated working voltage 5 s ± 0.25 % R 45 min at full rated working voltage at -65 °C ± 0.25 % R 240 h with humidity ranging from 80 % RH to 98 % RH ± 0.50 % R Leads immersed in +350 °C solder to within 1/16" of device body for 3 s ± 0.25 % R Total of 18 shocks at 100 g’s ± 0.25 % R Vibration 12 h at maximum of 20 g’s between 10 Hz and 2000 Hz ± 0.25 % R Load Life 1000 h at +70 °C, rated power applied 1.5 h “ON, 0.5 h “OFF” for full 1000 h period. Derated according to the curve. ± 1.00 % R Terminal Strength 4.5 pound pull for 30 s ± 0.25 % R Insulation Resistance 10 000 M (minimum) - No evidence of arcing or damage (200 VRMS for 1 min) - TEST Power Conditioning Thermal Shock Short Time Overload Low Temperature Operation Moisture Resistance Resistance to Soldering Heat Shock Dielectric Withstanding Voltage Revision: 12-Sep-13 Document Number: 31511 4 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: MDP1603100KFD04 MDP160350K0GD04 MDP1401100RGE04 MDP1401120KGE04 MDP1401120RGE04 MDP140112K0GE04 MDP140115K0GE04 MDP1401180KGE04 MDP1401180RGE04 MDP140118K0GE04 MDP14011K50GE04 MDP14011K80GE04 MDP14011M00GE04 MDP1401200KGE04 MDP1401200RGE04 MDP140120K0GE04 MDP1401220KGE04 MDP140122K0GE04 MDP140122R0GE04 MDP1401270RGE04 MDP140127K0GE04 MDP140127R0GE04 MDP14012K00GE04 MDP1401330KGE04 MDP140133K0GE04 MDP140133R0GE04 MDP1401390RGE04 MDP14013K90GE04 MDP1401470RGE04 MDP1401510KGE04 MDP140151R0GE04 MDP140156R0GE04 MDP1401680KGE04 MDP140168K0GE04 MDP140168R0GE04 MDP14016K80GE04 MDP1401820RGE04 MDP140182K0GE04 MDP140182R0GE04 MDP14018K20GE04 MDP140312K0GE04 MDP1403150KGE04 MDP140318K0GE04 MDP14031K20GE04 MDP14031K50GE04 MDP14031M00GE04 MDP1403200KGE04 MDP1403200RGE04 MDP1403220KGE04 MDP1403220RGE04 MDP140327R0GE04 MDP14032K00GE04 MDP14032K20GE04 MDP1403330KGE04 MDP140333K0GE04 MDP1403390KGE04 MDP140339K0GE04 MDP14033K90GE04 MDP1403470KGE04 MDP140351K0GE04 MDP1403560RGE04 MDP140356R0GE04 MDP14035K60GE04 MDP140368K0GE04 MDP1403820RGE04 MDP140382K0GE04 MDP1601120KGE04 MDP1601120RGE04 MDP1601150KGE04 MDP1601180KGE04 MDP1601180RGE04 MDP160118K0GE04 MDP16011K80GE04 MDP16011M00GE04 MDP1601200KGE04 MDP1601200RGE04 MDP1601220KGE04 MDP160122R0GE04 MDP1601270RGE04 MDP1601330KGE04 MDP160133K0GE04 MDP160133R0GE04 MDP1601390RGE04 MDP160139K0GE04 MDP160139R0GE04 MDP16013K90GE04 MDP1601470KGE04 MDP160147R0GE04 MDP160151K0GE04 MDP160151R0GE04 MDP1601560KGE04 MDP160156R0GE04 MDP16015K10GE04 MDP16015K60GE04 MDP160168K0GE04 MDP160168R0GE04 MDP16016K80GE04 MDP1601820RGE04 MDP160182K0GE04 MDP160182R0GE04