MKP1840327634

Not Recommended for New Designs, Use MKP385 MKP1840 www.vishay.com Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • Pulse operations • SMPS and thyristor circuits • Storage, filter, timing, sample and hold circuits QUICK REFERENCE DATA Capacitance range Capacitance tolerances Climatic testing class according to IEC 60068 4700 pF to 10 μF ± 20 % (M), ± 10 % (K), ± 5 % (J) 55/100/56 Operating temperature range -55 °C to +100 °C Dielectric Polypropylene film Electrodes Construction Coating Leads Metallized Extended metallized film (refer to general information following the link in note below table) Flame retardant plastic case, epoxy resin sealed UL-class 94 V-0 Tinned wire Rated voltages (UR) 100 VDC, 160 VDC, 250 VDC, 400 VDC, 630 VDC Insulation resistance Measured at 100 VDC after one minute For C  0.33 μF: 25 000 M (UR 100 VDC) Permissible AC voltages (RMS) up to 60 Hz Test voltage (electrode/electrode) Time constant Temperature coefficient Capacitance drift Dielectric absorption Derating for DC and AC category voltage UC Self inductance Pull test on leads 63 VAC, 100 VAC, 160 VAC, 220 VAC, 250 VAC 1.6 x UR for 2 s Measured at 100 VDC after one minute For C > 0.33 μF: 30 000 s minimum value -250 x 10-6/°C (typical value) Up to +40 °C, < 0.5 % for a period of two years 0.05 % (typical value) according to IEC 60068-2-21 At +85 °C: UC = 1.0 UR At +100 °C: UC = 0.7 UR ~ 6 nH measured with 2 mm long leads 30 N in direction of leads according to IEC 60068-2-21 Note • For further details, please refer to the general information available at www.vishay.com/doc?26033 Revision: 13-Oct-14 Document Number: 26061 1 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not Recommended for New Designs, Use MKP385 MKP1840 www.vishay.com Vishay Roederstein DIMENSIONS in millimeters l max. w max. Marking h max. 0.6 6-1 ± 0.4 Pitch ± 0.4 Ø 0.8 LEAD DIAMETER dt W PITCH 0.5 ± 0.05 - 5 to 7.5 0.6 ± 0.06 - 10 0.6 ± 0.06 6 15 0.8 ± 0.08 >6 15 0.8 ± 0.08 < 16 22.5 to 37.5 1.0 ± 0.1  16 22.5 to 37.5 MAXIMUM PULSE RISE TIME MAXIMUM PULSE RISE TIME dV/dt [V/μs] PCM (mm) 160 VDC 100 VDC 250 VDC 400 VDC 630 VDC 5 390 - - - - 7.5 - 240 300 - - 10 - 175 220 380 510 15 - 100 125 200 280 22.5 - 60 75 120 160 27.5 - 45 60 95 120 37.5 - 30 40 65 85 Note • If the maximum pulse voltage is less than the rated voltage higher dV/dt values can be permitted. DISSIPATION FACTOR tan  MEASURED AT C  0.1 μF 1 kHz  10 x 10 kHz  10 x 10-4 100 kHz  10 x 10-4 10-4 0.1 μF < C  1.0 μF  10 x 10-4 C > 1.0 μF  40 x 10-4  10 x 10-4 - - - Maximum values Revision: 13-Oct-14 Document Number: 26061 2 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not Recommended for New Designs, Use MKP385 MKP1840 www.vishay.com Vishay Roederstein ELECTRICAL DATA URDC (V) 100 160 250 CAP. (μF) CAPACITANCE CODE VOLTAGE CODE VAC DIMENSIONS wxhxl (mm) PCM (mm) 5.0 0.0047 -247 3.5 x 8.0 x 7.2 0.0068 -268 3.5 x 8.0 x 7.2 5.0 0.010 -310 3.5 x 8.0 x 7.2 5.0 0.015 -315 3.5 x 8.0 x 7.2 5.0 0.022 -322 3.5 x 8.0 x 7.2 5.0 0.033 -333 3.5 x 8.0 x 7.2 5.0 0.047 -347 4.5 x 9.0 x 7.2 5.0 0.068 -368 4.5 x 9.0 x 7.2 5.0 0.100 -410 6.0 x 11.0 x 7.2 5.0 0.033 -333 3.0 x 8.0 x 10.0 7.5 0.047 -347 3.0 x 8.0 x 10.0 7.5 0.068 -368 4.0 x 10.0 x 12.5 10.0 0.10 -410 4.0 x 10.0 x 12.5 10.0 0.15 -415 5.0 x 11.0 x 12.5 10.0 0.22 -422 5.0 x 11.0 x 17.5 15.0 0.33 -433 6.0 x 12.0 x 17.5 15.0 0.47 -447 7.0 x 13.5 x 17.5 15.0 0.68 -468 1.0 01 16 63 100 8.5 x 15.0 x 17.5 15.0 -510 7.0 x 16.5 x 26.0 22.5 1.5 -515 8.5 x 18.0 x 26.0 22.5 2.2 -522 9.0 x 19.0 x 31.5 27.5 3.3 -533 11.0 x 21.0 x 31.0 27.5 4.7 -547 12.5 x 22.5 x 41.5 37.5 6.8 -568 14.5 x 24.5 x 41.5 37.5 10.0 -610 16.0 x 28.5 x 41.5 37.5 0.010 -310 3.0 x 8.0 x 10.0 7.5 0.015 -315 3.0 x 8.0 x 10.0 7.5 0.022 -322 3.0 x 8.0 x 10.0 7.5 0.033 -333 4.0 x 10.0 x 12.5 10.0 0.047 -347 4.0 x 10.0 x 12.5 10.0 0.068 -368 4.0 x 10.0 x 12.5 10.0 0.10 -410 4.0 x 10.0 x 12.5 10.0 0.15 -415 5.0 x 11.0 x 17.5 15.0 0.22 -422 5.0 x 11.0 x 17.5 15.0 0.33 -433 6.0 x 12.0 x 17.5 15.0 0.47 -447 7.0 x 13.5 x 17.5 15.0 0.68 -468 6.0 x 15.5 x 26.0 22.5 1.0 -510 7.0 x 16.5 x 26.0 22.5 1.5 -515 9.0 x 19.0 x 31.5 27.5 2.2 -522 11.0 x 21.0 x 31.0 27.5 3.3 -533 13.0 x 23.0 x 31.0 27.5 4.7 -547 12.5 x 22.5 x 41.5 37.5 6.8 -568 14.5 x 24.5 x 41.5 37.5 10.0 -610 16.0 x 28.5 x 41.5 37.5 Revision: 13-Oct-14 25 160 Document Number: 26061 3 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not Recommended for New Designs, Use MKP385 MKP1840 www.vishay.com Vishay Roederstein ELECTRICAL DATA URDC (V) 400 630 CAP. (μF) CAPACITANCE CODE 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 0.010 0.015 0.022 0.033 0.047 0.068 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 -310 -315 -322 -333 -347 -368 -410 -415 -422 -433 -447 -468 -510 -515 -522 -533 -547 -310 -315 -322 -333 -347 -368 -410 -415 -422 -433 -447 -468 -510 -515 -522 VOLTAGE CODE VAC 40 220 63 250 (1) DIMENSIONS wxhxl (mm) PCM (mm) 4.0 x 10.0 x 12.5 4.0 x 10.0 x 12.5 4.0 x 10.0 x 12.5 4.0 x 10.0 x 12.5 5.0 x 11.0 x 17.5 5.0 x 11.0 x 17.5 5.0 x 11.0 x 17.5 6.0 x 12.0 x 17.5 7.0 x 13.5 x 17.5 6.0 x 15.5 x 26.0 7.0 x 16.5 x 26.0 9.0 x 19.0 x 31.5 11.0 x 21.0 x 31.0 13.0 x 23.0 x 31.0 12.5 x 22.5 x 41.5 14.5 x 24.5 x 41.5 18.0 x 32.5 x 41.5 4.0 x 10.0 x 12.5 4.0 x 10.0 x 12.5 4.0 x 10.0 x 12.5 5.0 x 11.0 x 17.5 5.0 x 11.0 x 17.5 5.0 x 11.0 x 17.5 6.0 x 12.0 x 17.5 6.0 x 15.5 x 26.0 7.0 x 16.5 x 26.0 8.5 x 18.0 x 26.0 9.0 x 19.0 x 31.5 11.0 x 21.0 x 31.0 13.0 x 23.0 x 31.0 14.5 x 24.5 x 41.5 16.0 x 28.5 x 43.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 27.5 27.5 27.5 37.5 37.5 37.5 10.0 10.0 10.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 27.5 27.5 27.5 37.5 37.5 Notes • Further C-values upon request. (1) Not suitable for mains applications. Please refer to X-capacitors in our catalog “RFI Suppression Components”. RECOMMENDED PACKAGING LETTER CODE TYPE OF PACKAGING HEIGHT (H) (mm) D G F W V G - Ammo Ammo Reel Reel Reel Ammo Bulk 16.5 18.5 16.5 18.5 18.5 18.5 - REEL DIAMETER (mm) S (1) S (1) 350 350 500 L (2) - ORDERING CODE EXAMPLES PCM 7.5 TO 10 PCM 15 PCM 22.5 TO 27.5 PCM 37.5 MKP1840310405D MKP1840310405G MKP1840310405F MKP1840310405W MKP1840522255V MKP1840522255G MKP1840547255 x x x x x x x x x x x x x x x Notes (1) S = box size 55 mm x 210 mm x 340 mm (w x h x l) (2) L = box size 60 mm x 360 mm x 510 mm (w x h x l) Revision: 13-Oct-14 Document Number: 26061 4 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not Recommended for New Designs, Use MKP385 MKP1840 www.vishay.com Vishay Roederstein 100 7 5 VRMS VRMS PERMISSIBLE AC VOLTAGE VS. FREQUENCY 47 00 0.0 3 2 0.0 33 0.0 47 10 7 5 3 2 0.1 3 2 100 VDC 3 2 VRMS 10 3 Capacitance in pF and μF 5 7 10 4 2 5 5 7 10 3 5 3 2 1 3 5 7 10 f [Hz] Capacitance in μF 0.0 100 7 5 3 2 10 7 5 3 2 2 1 6 1 0.0 47 0.1 4.7 2.2 2 3 5 7 10 4 2 3 1.0 0.4 7 0.2 5 7 10 5 2 47 0.1 0.2 2 3 2.2 1.0 10 4.7 3 5 7 10 5 0.4 7 160 VDC 10 3 2 3 5 7 10 4 2 5 3 2 10 7 5 3 2 2 250 VDC 10 3 0.0 2 3 5 7 10 6 Capacitance in μF 0.0 1 0.0 2 100 7 5 3 2 0.0 22 10 0.0 33 f [Hz] VRMS 1 Capacitance in μF 100 7 5 3 2 1 10 7 5 5 3 2 1 5 7 10 6 f [Hz] 2 0.0 47 3.3 2.2 1.0 0.4 7 0.1 0.2 2 400 VDC 10 3 2 3 5 7 10 4 2 3 5 7 10 5 2 3 5 7 10 6 f [Hz] 0.0 47 2.2 1.0 0.1 0.4 0 7 .22 630 VDC 10 3 2 3 Revision: 13-Oct-14 5 7 10 4 2 3 5 7 10 5 2 3 5 7 10 6 f [Hz] 0.01 5 Z = f (f) (Lead length 2.0mm) 0.1 5 1.0 5 10 0.015 μF 10 7 5 3 2 1 22 0.068 μF 0.033 μF 1 0.0 100 7 5 3 2 0.15 μF 0.0 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 0.01 7 5 3 2 0.001 0.33 μF Capacitance in μF 6.8 μF 3.3 μF 1.5 μF 0.68 μF 5 3 2 Z (Ω) VRMS IMPEDANCE VS. FREQUENCY 5 100 [MHz] Document Number: 26061 5 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000