MKP1847665234Y5

Not for New Designs - Alternative Device: MKP1847C AC Filtering MKP1847 AC Filtering www.vishay.com Vishay Roederstein Metallized Polypropylene Film Capacitor AC Filtering Radial Type FEATURES • High peak current capabilities • Long lifetime • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • • • • • AC filtering UPS systems Renewable energy - grid interface Harmonic filter Welding equipment QUICK REFERENCE DATA Rated capacitance range 1 μF to 70 μF Capacitance tolerance ± 5 % and 10 % Maximum continuous AC voltage (50 Hz / 60 Hz) range, UNAC 230 VAC, 250 VAC, 275 VAC, 310 VAC, 350 VAC, 440 VAC Climatic testing class 40/85/56 Maximum application temperature 105 °C Maximum permissible case temperature 105 °C Reference standards IEC 61071, IEC 60068 Dielectric Polypropylene film Electrodes Metallized dielectric film Construction Mono and internal serial construction Encapsulation Plastic case sealed with resin; flame retardant Terminals Tinned wire Self inductance (LS) < 1 nH per mm of lead spacing Withstanding DC voltage between terminals (1) 1.5 UNDC for 10 s, cut off current 10 mA, rise time ≤ 1000 V/s RC between leads, after 1 min > 10 000 s Measuring voltage: 500 V Insulation resistance Life time expectancy (2) Useful lifetime: > 60 000 h at intended mains voltage (3) FIT: < 10 x 10-9/h (10 per 109 component hours) at 0.5 x UNAC, 40 °C Marking C-value; tolerance; rated voltage; code for dielectric material; code for manufacturing origin; manufacturer’s type designation; manufacturer location, year and week; manufacturer’s logo or name Notes • For more detailed data and test requirements, contact dc-film@vishay.com • For general information like characteristics and definitions used for film capacitors follow the link: www.vishay.com/doc?28147 (1) See document “Voltage Proof Test for Metalized Capacitors” (www.vishay.com/doc?28169) (2) Statements about life time are based on calculations which are based on internal tests. They have to be understood exclusively as estimations. Also due to external factors, the life time in the field application may deviate from the calculated life time (3) Intended operational continuous mains voltage: see www.vishay.com/doc?28245 MAXIMUM AC VOLTAGE RATINGS (VRMS) UNAC 230 V 250 V 275 V 310 V 350 V UOPAC at 85 °C 230 V 250 V 275 V 310 V 350 V 440 V UOPAC at 105 °C 160 V 175 V 190 V 210 V 240 V 300 V Revision: 19-May-2021 440 V Document Number: 28172 1 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: MKP1847C AC Filtering MKP1847 AC Filtering www.vishay.com Vishay Roederstein COMPOSITION OF CATALOG NUMBER CAPACITANCE (numerically) MULTIPLIER (nF) 10 4 100 5 1000 6 10 000 7 MKP 1847 Example 512 1200 nF 1.2 µF 612 12 000 nF 12 µF 680 6 12 80 000 nF 25 4 P1 (mm) PITCH CODE 27.5 K 37.5 P 52.5 Y 80 µF P 2 TYPE CONSTRUCTION METALLIZED POLYPROPYLENE TOLERANCE VOLTAGE SPECIAL CODE FOR TERMINAL UN = 23 = 230 VRMS 4 ±5% 2 2 pins UN = 25 = 250 VRMS 5 ± 10 % 4 4 pins P2 = 10.2 mm UN = 27 = 275 VRMS 5 4 pins P2 = 20.3 mm UN = 31 = 310 VRMS (1) Customized UN = 35 = 350 VRMS UN = 38 = 380 VRMS UN = 44 = 440 VRMS Note (1) Tabs terminals or customized terminals are available on request DIMENSIONS in millimeters 2 PINS w I h P1 6-1 Ø dt P1 ± 0.4 - PCM 27.5 mm P1 ± 0.5 - PCM ≥ 37.5 mm 4 PINS w I Marking P2 P2 h P1 6-2 Ø dt P1 ± 0.5 P2 ± 0.5 Note • Ø dt ± 10 % of standard diameter specified Revision: 19-May-2021 Document Number: 28172 2 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: MKP1847C AC Filtering MKP1847 AC Filtering www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE UNAC CAP. (1) (V) (μF) DIMENSION (2) (mm) P1 (mm) P2 (mm) dV/dt (3) IPEAK (V/μs) (A) IRMS (4) (A) tan δ 1 kHz (< 10-4) (5) tan δ 10 kHz (< 10-4) (5) ORDERING CODE (6) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS w h l 1 9.0 19.0 32.0 27.5 - 45 45 2.5 - 5 - 30 - MKP1847510234K2 2 11.0 21.0 32.0 27.5 - 45 90 3.5 - 5 - 30 - MKP1847520234K2 3 13.0 23.0 32.0 27.5 - 45 135 5.0 - 5 - 30 - MKP1847530234K2 4 15.0 25.0 32.0 27.5 - 45 180 6.0 - 5 - 30 - MKP1847540234K2 5 18.0 28.0 32.0 27.5 - 45 225 7.5 - 5 - 30 - MKP1847550234K2 6 18.0 28.0 32.0 27.5 - 45 270 8.0 - 5 - 30 - MKP1847560234K2 7 18.0 28.0 32.0 27.5 - 45 315 8.5 - 5 - 30 - MKP1847570234K2 8 21.0 31.0 32.0 27.5 - 45 360 10.0 - 5 - 30 - MKP1847580234K2 9 21.0 31.0 32.0 27.5 - 45 405 10.5 - 5 - 30 - MKP1847590234K2 10 20.0 35.0 32.0 27.5 - 45 450 11.5 - 5 - 30 - MKP1847610234K2 10 18.5 35.5 43.0 37.5 10.2 20 200 8.0 9.0 10 8 75 70 MKP1847610234P* 12 18.5 35.5 43.0 37.5 10.2 20 240 9.0 10.0 10 8 75 70 MKP1847612234P* 15 21.5 38.5 43.0 37.5 10.2 20 300 11.0 12.0 10 8 75 70 MKP1847615234P* 20 24.0 44.0 42.0 37.5 10.2 20 400 13.5 14.5 10 8 75 70 MKP1847620234P* 22 24.0 44.0 42.0 37.5 10.2 20 440 14.0 15.5 10 8 75 70 MKP1847622234P* UNDC = 450 V; UOPAC AT 85 °C= 230 VRMS; UOPAC AT 105 °C = 160 VRMS 230 25 30.0 45.0 42.0 37.5 10.2 / 20.3 20 500 16.0 17.5 10 8 75 70 MKP1847625234P* 30 30.0 45.0 42.0 37.5 10.2 / 20.3 20 600 17.5 19.0 10 8 75 70 MKP1847630234P* 30 25.0 45.0 57.5 52.5 10.2 10 300 13.5 15.0 20 17 150 135 MKP1847630234Y* 35 25.0 45.0 57.5 52.5 10.2 10 350 14.5 16.0 20 17 150 135 MKP1847635234Y* 40 30.0 45.0 57.5 52.5 20.3 10 400 16.5 18.0 20 17 150 135 MKP1847640234Y* 45 30.0 45.0 57.5 52.5 20.3 10 450 17.5 19.0 20 17 150 135 MKP1847645234Y* 50 35.0 50.0 57.5 52.5 20.3 10 500 20.0 21.5 20 17 150 135 MKP1847650234Y* 55 35.0 50.0 57.5 52.5 20.3 10 550 21.0 22.5 20 17 150 135 MKP1847655234Y* 60 35.0 50.0 57.5 52.5 20.3 10 600 21.5 23.5 20 17 150 135 MKP1847660234Y* 65 45.0 45.0 57.5 52.5 20.3 10 650 - 25.5 - 17 - 135 MKP1847665234Y5 70 45.0 45.0 57.5 52.5 20.3 10 700 - 26.0 - 17 - 135 MKP1847670235Y5 UNDC = 500 V; UOPAC AT 85 °C = 250 VRMS; UOPAC AT 105 °C = 175 VRMS 250 1 9.0 19.0 32.0 27.5 - 50 50 2.5 - 5 - 25 - MKP1847510254K2 2 11.0 21.0 32.0 27.5 - 50 100 4 - 5 - 25 - MKP1847520254K2 3 13.0 23.0 32.0 27.5 - 50 150 5 - 5 - 25 - MKP1847530254K2 4 15.0 25.0 32.0 27.5 - 50 200 6 - 5 - 25 - MKP1847540254K2 5 18.0 28.0 32.0 27.5 - 50 250 7 - 5 - 25 - MKP1847550254K2 6 18.0 28.0 32.0 27.5 - 50 300 6 - 5 - 25 - MKP1847560254K2 7 21.0 31.0 32.0 27.5 - 50 350 8 - 5 - 25 - MKP1847570254K2 8 21.0 31.0 32.0 27.5 - 50 400 9 - 5 - 25 - MKP1847580254K2 9 20.0 35.0 32.0 27.5 - 50 450 11 - 5 - 25 - MKP1847590254K2 5 18.5 35.5 43.0 37.5 10.2 25 125 7 8 10 8 70 65 MKP1847550254P* 6 18.5 35.5 43.0 37.5 10.2 25 150 7 8 10 8 70 65 MKP1847560254P* 7 18.5 35.5 43.0 37.5 10.2 25 175 7 8 10 8 70 65 MKP1847570254P* 8 18.5 35.5 43.0 37.5 10.2 25 200 8 9 10 8 70 65 MKP1847580254P* 9 18.5 35.5 43.0 37.5 10.2 25 225 8 9 10 8 70 65 MKP1847590254P* 10 18.5 35.5 43.0 37.5 10.2 25 250 9 10 10 8 70 65 MKP1847610254P* 12 18.5 35.5 43.0 37.5 10.2 25 300 10 11 10 8 70 65 MKP1847612254P* 15 21.5 38.5 43.0 37.5 10.2 25 375 11 12 10 8 70 65 MKP1847615254P* Revision: 19-May-2021 Document Number: 28172 3 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: MKP1847C AC Filtering MKP1847 AC Filtering www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE UNAC CAP. (V) (μF) (1) DIMENSION (2) (mm) w h P1 (mm) P2 (mm) (3) dV/dt (V/μs) IPEAK (A) l IRMS (4) (A) tan δ 1 kHz (< 10-4) (5) tan δ 10 kHz (< 10-4) (5) ORDERING CODE (6) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS UNDC = 500 V; UOPAC AT 85 °C = 250 VRMS; UOPAC AT 105 °C = 175 VRMS 250 20 30.0 45.0 42.0 37.5 10.2 / 20.3 25 500 10 11 10 8 70 65 MKP1847620254P* 22 30.0 45.0 42.0 37.5 10.2 / 20.3 25 550 15 16 10 8 70 65 MKP1847622254P* 25 30.0 45.0 42.0 37.5 10.2 / 20.3 25 625 16 17 10 8 70 65 MKP1847625254P* 15 25.0 45.0 57.5 52.5 10.2 12 180 12 13 16 14 135 125 MKP1847615254Y* 20 25.0 45.0 57.5 52.5 10.2 12 240 12 13 16 14 135 125 MKP1847620254Y* 22 25.0 45.0 57.5 52.5 10.2 12 264 12 13 16 14 135 125 MKP1847622254Y* 25 25.0 45.0 57.5 52.5 10.2 12 300 13 14 16 14 135 125 MKP1847625254Y* 30 30.0 45.0 57.5 52.5 20.3 12 360 15 16 16 14 135 125 MKP1847630254Y* 35 30.0 45.0 57.5 52.5 20.3 12 420 16 17 16 14 135 125 MKP1847635254Y* 40 35.0 50.0 57.5 52.5 20.3 12 480 19 20 16 14 135 125 MKP1847640254Y* 45 35.0 50.0 57.5 52.5 20.3 12 540 20 21 16 14 135 125 MKP1847645254Y* 50 35.0 50.0 57.5 52.5 20.3 12 600 21 22 16 14 135 125 MKP1847650254Y* 55 45.0 45.0 57.5 52.5 20.3 12 660 - 24 - 14 - 125 MKP1847655254Y5 60 45.0 45.0 57.5 52.5 20.3 12 720 - 25 - 14 - 125 MKP1847660255Y5 1 9.0 19.0 32.0 27.5 - 55 55 2.5 - - MKP1847510274K2 2 13.0 23.0 32.0 27.5 - 55 110 4.5 - 5 - 25 - MKP1847520274K2 3 15.0 25.0 32.0 27.5 - 55 165 5.5 - 5 - 25 - MKP1847530274K2 4 18.0 28.0 32.0 27.5 - 55 220 7 - 5 - 25 - MKP1847540274K2 5 21.0 31.0 32.0 27.5 - 55 275 8 - 5 - 25 - MKP1847550274K2 6 21.0 31.0 32.0 27.5 - 55 330 7 - 5 - 25 - MKP1847560274K2 7 20.0 35.0 32.0 27.5 - 55 385 10 - 5 - 25 - MKP1847570274K2 5 18.5 35.5 43.0 37.5 10.2 30 150 7 8 8 7 65 55 MKP1847550274P* 6 18.5 35.5 43.0 37.5 10.2 30 180 7 8 8 7 65 55 MKP1847560274P* 7 18.5 35.5 43.0 37.5 10.2 30 210 8 9 8 7 65 55 MKP1847570274P* 8 18.5 35.5 43.0 37.5 10.2 30 240 8 9 8 7 65 55 MKP1847580274P* 9 18.5 35.5 43.0 37.5 10.2 30 270 9 10 8 7 65 55 MKP1847590274P* 10 21.5 38.5 43.0 37.5 10.2 30 300 10 11 8 7 65 55 MKP1847610274P* 12 21.5 38.5 43.0 37.5 10.2 30 360 11 12 8 7 65 55 MKP1847612274P* 15 24.0 44.0 42.0 37.5 10.2 30 450 13 14 8 7 65 55 MKP1847615274P* UNDC = 600 V; UOPAC AT 85 °C = 275 VRMS; UOPAC AT 105 °C = 190 VRMS 275 5 - 25 20 30.0 45.0 42.0 37.5 10.2 / 20.3 30 600 16 17 8 7 65 55 MKP1847620274P* 15 25.0 45.0 57.5 52.5 10.2 13 195 11 12 15 12 125 105 MKP1847615274Y* 20 25.0 45.0 57.5 52.5 10.2 13 260 12 13 15 12 125 105 MKP1847620274Y* 22 25.0 45.0 57.5 52.5 10.2 13 286 13 14 15 12 125 105 MKP1847622274Y* 25 30.0 45.0 57.5 52.5 20.3 13 325 15 16 15 12 125 105 MKP1847625274Y* 30 30.0 45.0 57.5 52.5 20.3 13 390 16 17 15 12 125 105 MKP1847630274Y* 35 35.0 50.0 57.5 52.5 20.3 13 455 19 20 15 12 125 105 MKP1847635274Y* 40 35.0 50.0 57.5 52.5 20.3 13 520 20 21 15 12 125 105 MKP1847640274Y* 45 45.0 45.0 57.5 52.5 20.3 13 585 - 23 - 12 - 105 MKP1847645274Y5 50 45.0 45.0 57.5 52.5 20.3 13 650 - 24 - 12 - 105 MKP1847650275Y5 Revision: 19-May-2021 Document Number: 28172 4 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: MKP1847C AC Filtering MKP1847 AC Filtering www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE UNAC CAP. (V) (μF) (1) DIMENSION (2) (mm) w h P1 (mm) P2 (mm) (3) dV/dt (V/μs) IPEAK (A) l IRMS (4) (A) tan δ 1 kHz (< 10-4) (5) tan δ 10 kHz (< 10-4) (5) ORDERING CODE (6) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS UNDC = 630 V; UOPAC AT 85 °C = 310 VRMS; UOPAC AT 105 °C = 210 VRMS 310 1 11.0 21.0 32.0 27.5 - 68 68 3 - 5 - 20 - MKP1847510314K2 2 15.0 25.0 32.0 27.5 - 68 136 5 - 5 - 20 - MKP1847520314K2 3 18.0 28.0 32.0 27.5 - 68 204 7 - 5 - 20 - MKP1847530314K2 4 21.0 31.0 32.0 27.5 - 68 272 8 - 5 - 20 - MKP1847540314K2 5 21.0 31.0 32.0 27.5 - 68 340 9 - 5 - 20 - MKP1847550314K2 5 18.5 35.5 43.0 37.5 10.2 35 175 7 8 7 6 55 50 MKP1847550314P* 6 18.5 35.5 43.0 37.5 10.2 35 210 8 9 7 6 55 50 MKP1847560314P* 7 18.5 35.5 43.0 37.5 10.2 35 245 9 10 7 6 55 50 MKP1847570314P* 8 21.5 38.5 43.0 37.5 10.2 35 280 10 11 7 6 55 50 MKP1847580314P* 9 21.5 38.5 43.0 37.5 10.2 35 315 10 11 7 6 55 50 MKP1847590314P* 10 21.5 38.5 43.0 37.5 10.2 35 350 11 12 7 6 55 50 MKP1847610315P* 12 24.0 44.0 42.0 37.5 10.2 35 420 12 13 7 6 55 50 MKP1847612314P* 15 30.0 45.0 42.0 37.5 10.2 / 20.3 35 525 15 16 7 6 55 50 MKP1847615314P* 10 25.0 45.0 57.5 52.5 10.2 15 150 10 11 12 10 105 90 MKP1847610314Y* 12 25.0 45.0 57.5 52.5 10.2 15 180 10 11 12 10 105 90 MKP1847612314Y* 15 25.0 45.0 57.5 52.5 10.2 15 225 12 13 12 10 105 90 MKP1847615314Y* 20 30.0 45.0 57.5 52.5 20.3 15 300 14 15 12 10 105 90 MKP1847620314Y* 22 35.0 50.0 57.5 52.5 20.3 15 330 16 17 12 10 105 90 MKP1847622314Y* 25 35.0 50.0 57.5 52.5 20.3 15 375 17 18 12 10 105 90 MKP1847625314Y* 30 45.0 45.0 57.5 52.5 20.3 15 450 - 21 - 10 - 90 MKP1847630314Y5 35 45.0 45.0 57.5 52.5 20.3 15 525 - 22 - 10 - 90 MKP1847635314Y5 UNDC = 700 V; UOPAC AT 85 °C = 350 VRMS; UOPAC AT 105 °C = 240 VRMS 350 1 11.0 21.0 32.0 27.5 - 100 100 3 - 5 - 20 - MKP1847510354K2 2 15.0 25.0 32.0 27.5 - 100 200 5 - 5 - 20 - MKP1847520354K2 3 18.0 28.0 32.0 27.5 - 100 300 7 - 5 - 20 - MKP1847530354K2 4 21.0 31.0 32.0 27.5 - 100 400 9 - 5 - 20 - MKP1847540354K2 5 18.5 35.5 43.0 37.5 10.2 50 250 7 8 7 6 50 45 MKP1847550354P* 6 18.5 35.5 43.0 37.5 10.2 50 300 8 9 7 6 50 45 MKP1847560354P* 7 21.5 38.5 43.0 37.5 10.2 50 350 9 10 7 6 50 45 MKP1847570354P* 8 21.5 38.5 43.0 37.5 10.2 50 400 10 11 7 6 50 45 MKP1847580354P* 9 24.0 44.0 42.0 37.5 10.2 50 450 11 12 7 6 50 45 MKP1847590354P* 10 24.0 44.0 42.0 37.5 10.2 50 500 12 13 7 6 50 45 MKP1847610354P* 12 30.0 45.0 42.0 37.5 10.2 / 20.3 50 600 14 15 7 6 50 45 MKP1847612354P* 10 25.0 45.0 57.5 52.5 10.2 25 250 10 11 12 10 100 85 MKP1847610354Y* 12 25.0 45.0 57.5 52.5 10.2 25 300 11 12 12 10 100 85 MKP1847612354Y* 15 25.0 45.0 57.5 52.5 10.2 25 375 12 13 12 10 100 85 MKP1847615354Y* 20 30.0 45.0 57.5 52.5 20.3 25 500 15 16 12 10 100 85 MKP1847620354Y* 22 35.0 50.0 57.5 52.5 20.3 25 550 17 18 12 10 100 85 MKP1847622354Y* 25 35.0 50.0 57.5 52.5 20.3 25 625 18 19 12 10 100 85 MKP1847625354Y* 30 45.0 45.0 57.5 52.5 20.3 25 750 - 22 - 10 - 85 MKP1847630354Y5 Revision: 19-May-2021 Document Number: 28172 5 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: MKP1847C AC Filtering MKP1847 AC Filtering www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE UNAC CAP. (V) (μF) 440 1.0 1.5 2.0 2.2 3 3.3 4 5 5 6 7 8 9 10 12 (1) DIMENSION (2) (mm) w h 15.7 18.5 21.5 21.5 24.0 24.0 30.0 30.0 25.0 30.0 35.0 35.0 35.0 35.0 45.0 28.5 35.5 38.5 38.5 44.0 44.0 45.0 57.0 45.0 45.0 50.0 50.0 50.0 50.0 45.0 P1 (mm) P2 (mm) (3) dV/dt (V/μs) IPEAK (A) IRMS (4) (A) tan δ 1 kHz (< 10-4) (5) tan δ 10 kHz (< 10-4) (5) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS UNDC = 1000 V; UOPAC AT 85 °C = 440 VRMS; UOPAC AT 105 °C = 300 VRMS 41.5 37.5 10.2 80 80 5 7 25 43.0 37.5 10.2 80 120 7 7 25 43.0 37.5 10.2 80 160 9 10 7 6 25 20 43.0 37.5 10.2 80 176 9 10 7 6 25 20 42.0 37.5 10.2 / 20.3 80 240 12 13 7 6 25 20 42.0 37.5 10.2 / 20.3 80 264 12 13 7 6 25 20 42.0 37.5 10.2 / 20.3 80 320 14 15 7 6 25 20 42.0 37.5 20.3 80 400 17 18 7 6 25 20 57.5 52.5 10.2 35 175 13 14 12 10 50 40 57.5 52.5 20.3 35 210 14 15 12 10 50 40 57.5 52.5 20.3 35 245 17 18 12 10 50 40 57.5 52.5 20.3 35 280 18 19 12 10 50 40 57.5 52.5 20.3 35 315 19 20 12 10 50 40 57.5 52.5 20.3 35 350 20 21 12 10 50 40 57.5 52.5 20.3 35 420 24 10 40 ORDERING CODE (6) l MKP1847510444P* MKP1847515444P* MKP1847520444P* MKP1847522444P* MKP1847530444P* MKP1847533444P* MKP1847540444P* MKP1847550444P* MKP1847550444Y* MKP1847560444Y* MKP1847570444Y* MKP1847580444Y* MKP1847580444Y* MKP1847610444Y* MKP1847612444Y5 Notes (1) Intermediate capacitance values available on request (2) Standard dimension. For tolerances see chapter “Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances” (3) Rated voltage pulse slope (dU/dt) R at voltage U NDC (4) Maximum RMS current at 10 kHz, +85 °C, capacitance tolerance specified (5) The ESR (Equivalent Series Resistance) can be calculated as tan δ (f)/(2 x π x f x C) (6) Change the * symbol with special code for the terminals PACKAGING INFORMATION UNAC (V) 230 Revision: 19-May-2021 CAP. (1) (μF) 1 2 3 4 5 6 7 8 9 10 10 12 15 20 22 25 30 30 35 40 45 50 55 60 65 70 Ø dt ORDERING CODE (2) 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 MKP1847510234K2 MKP1847520234K2 MKP1847530234K2 MKP1847540234K2 MKP1847550234K2 MKP1847560234K2 MKP1847570234K2 MKP1847580234K2 MKP1847590234K2 MKP1847610234K2 MKP1847610234P* MKP1847612234P* MKP1847615234P* MKP1847620234P* MKP1847622234P* MKP1847625234P* MKP1847630234P* MKP1847630234Y* MKP1847635234Y* MKP1847640234Y* MKP1847645234Y* MKP1847650234Y* MKP1847655234Y* MKP1847660234Y* MKP1847665234Y5 MKP1847670235Y5 MASS (g) 6 9 11 12 17 16 15 22 21 21 32 30 37 48 45 62 56 69 65 91 86 107 101 96 121 120 SPQ (3) (pcs) 160 130 115 100 80 80 80 65 65 70 105 105 91 77 77 63 63 55 55 45 45 40 40 40 30 30 Document Number: 28172 6 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: MKP1847C AC Filtering MKP1847 AC Filtering www.vishay.com Vishay Roederstein PACKAGING INFORMATION UNAC (V) 250 275 Revision: 19-May-2021 CAP. (1) (μF) 1 2 3 4 5 6 7 8 9 5 6 7 8 9 10 12 15 20 22 25 15 20 22 25 30 35 40 45 50 55 60 1 2 3 4 5 6 7 5 6 7 8 9 10 12 15 20 15 20 22 25 30 35 40 45 50 Ø dt ORDERING CODE (2) 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 MKP1847510254K2 MKP1847520254K2 MKP1847530254K2 MKP1847540254K2 MKP1847550254K2 MKP1847560254K2 MKP1847570254K2 MKP1847580254K2 MKP1847590254K2 MKP1847550254P* MKP1847560254P* MKP1847570254P* MKP1847580254P* MKP1847590254P* MKP1847610254P* MKP1847612254P* MKP1847615254P* MKP1847620254P* MKP1847622254P* MKP1847625254P* MKP1847615254Y* MKP1847620254Y* MKP1847622254Y* MKP1847625254Y* MKP1847630254Y* MKP1847635254Y* MKP1847640254Y* MKP1847645254Y* MKP1847650254Y* MKP1847655254Y5 MKP1847660255Y5 MKP1847510274K2 MKP1847520274K2 MKP1847530274K2 MKP1847540274K2 MKP1847550274K2 MKP1847560274K2 MKP1847570274K2 MKP1847550274P* MKP1847560274P* MKP1847570274P* MKP1847580274P* MKP1847590274P* MKP1847610274P* MKP1847612274P* MKP1847615274P* MKP1847620274P* MKP1847615274Y* MKP1847620274Y* MKP1847622274Y* MKP1847625274Y* MKP1847630274Y* MKP1847635274Y* MKP1847640274Y* MKP1847645274Y5 MKP1847650275Y5 MASS (g) 6 9 10 12 16 15 22 21 20 36 35 34 32 31 30 27 34 63 61 57 83 77 75 71 97 91 111 105 98 123 120 6 11 12 16 22 21 20 34 33 31 30 28 37 34 45 56 78 70 67 95 86 106 96 186 186 SPQ (3) (pcs) 160 130 115 100 80 80 65 65 70 105 105 105 105 105 105 105 91 63 63 63 55 55 55 55 45 45 40 40 40 30 30 160 115 100 80 65 65 70 105 105 105 105 105 91 91 77 63 55 55 55 45 45 40 40 30 30 Document Number: 28172 7 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: MKP1847C AC Filtering MKP1847 AC Filtering www.vishay.com Vishay Roederstein PACKAGING INFORMATION UNAC (V) 310 350 440 CAP. (1) (μF) 1.0 2.0 3.0 4.0 5.0 5.0 6.0 7.0 8.0 9.0 10 12 15 10 12 15 20 22 25 30 35 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10 12 10 12 15 20 22 25 30 1.0 1.5 2.0 2.2 3.0 3.3 4.0 5.0 5.0 6.0 7.0 8.0 9.0 10 12 Ø dt ORDERING CODE (2) 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.2 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.2 1.2 1.2 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.2 1.2 1.2 MKP1847510314K2 MKP1847520314K2 MKP1847530314K2 MKP1847540314K2 MKP1847550314K2 MKP1847550314P* MKP1847560314P* MKP1847570314P* MKP1847580314P* MKP1847590314P* MKP1847610315P* MKP1847612314P* MKP1847615314P* MKP1847610314Y* MKP1847612314Y* MKP1847615314Y* MKP1847620314Y* MKP1847622314Y* MKP1847625314Y* MKP1847630314Y5 MKP1847635314Y5 MKP1847510354K2 MKP1847520354K2 MKP1847530354K2 MKP1847540354K2 MKP1847550354P* MKP1847560354P* MKP1847570354P* MKP1847580354P* MKP1847590354P* MKP1847610354P* MKP1847612354P* MKP1847610354Y* MKP1847612354Y* MKP1847615354Y* MKP1847620354Y* MKP1847622354Y* MKP1847625354Y* MKP1847630354Y5 MKP1847510444P* MKP1847515444P* MKP1847520444P* MKP1847522444P* MKP1847530444P* MKP1847533444P* MKP1847540444P* MKP1847550444P* MKP1847550444Y* MKP1847560444Y* MKP1847570444Y* MKP1847580444Y* MKP1847590444Y* MKP1847610445Y* MKP1847612445Y5 MASS (g) 9 12 16 22 20 32 30 28 37 35 34 44 58 81 77 71 93 117 111 187 187 9 12 15 21 30 28 37 34 48 45 60 78 74 67 87 111 102 187 27 42 52 52 61 58 74 83 100 135 155 152 145 140 180 SPQ (3) (pcs) 130 100 80 65 65 105 105 105 91 91 91 77 63 55 55 55 45 40 40 30 30 130 100 80 65 105 105 91 91 77 77 63 55 55 55 45 40 40 30 70 105 91 91 77 77 63 63 55 45 40 40 40 40 30 Notes (1) Intermediate capacitance values available on request (2) Change the * symbols with special code for terminals (3) SPQ = Standard Packing Quantity Revision: 19-May-2021 Document Number: 28172 8 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: MKP1847C AC Filtering MKP1847 AC Filtering www.vishay.com Vishay Roederstein CONSTRUCTION Low inductive wound cell elements of metallized polypropylene film. Pattern film for pitch ≥ 37.5 mm and standard foil for pitch 27.5 mm, potted with resin in a flame retardant case. Specific Method of Mounting to Withstand Vibration and Shock The capacitor unit is designed for mounting on a printed circuit board. In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the printed circuit board. The capacitors shall be mechanically fixed by the leads and the body clamped. Space Requirements on Printed-Circuit Board and Dimension Tolerances For the maximum product dimensions and maximum space requirements for length (lmax.), width (wmax.) following tolerances must be taken in account in the envelopment of the components as shown in the drawings below: Lmax. = I + ΔI Wmax. = w + Δw Wmax. P2 2 x P2 ± 0.5 mm 3 x P2 ± 0.5 mm 4 x P2 ± 0.5 mm 5 x P2 ± 0.5 mm Lmax. P1 ØD P1 (mm) 27.5 37.5 52.5 ΔL (mm) 2 3 4 ΔW (mm) 1.6 2.0 2.4 Ø D (mm) 1.2 1.5 1.7 Δh (mm) 0.2 0.5 0.5 For the maximum height hmax., a Δh of 0.5 mm must be taken in account on the height dimension h. For the minimum product dimensions for length (lmin.), width (wmin.) and height (hmin.) following tolerances of the components are valid: lmin. = l - Δl, wmin. = w - Δw and hmin. = h - Δh For products with pitch = 27.5 mm, Δl = 1.0 mm and Δw = Δh = 0.5 mm For products with pitch = 37.5 mm, Δl = 1.0 mm and Δw = Δh = 1.0 mm For products with pitch = 52.5 mm, Δl = 1.5 mm and Δw = Δh = 1.0 mm SOLDERING CONDITIONS For general soldering conditions and wave soldering profile, we refer to the document: “Characteristics and Definitions used for Film Capacitors”: www.vishay.com/doc?26033 Storage Temperature Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation. Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Revision: 19-May-2021 Document Number: 28172 9 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: MKP1847C AC Filtering MKP1847 AC Filtering www.vishay.com Vishay Roederstein CHARACTERISTICS Axis Title Axis Title 4 100 000 10000 10000 3 2 1000 -2 1st line 2nd line -1 RC (s) 2nd line 1000 0 1st line 2nd line 2nd line ΔC/C (%) 1 10 000 100 100 -3 -4 -5 -60 -40 -20 0 20 40 60 10 1000 10 -6 0 80 100 120 20 40 100 120 Tamb (°C) Capacitance as a function of ambient temperature (typical curve) Insulation resistance as a function of ambient temperature (typical curve) Axis Title Axis Title 10000 100 1.0 Pitch = 27.5 mm 10000 10 1 μF 1 1000 1st line 2nd line 1st line 2nd line 0.6 2nd line Z (Ω) 1000 0.8 10 μF 0.1 100 0.4 100 0.01 0.2 10 0 -80 -60 -40 -20 0 20 40 60 0.001 10 000 80 100 120 100 000 1 000 000 Ambient Temperature (°C) f (Hz) RMS voltage in function of temperature Impedance vs. frequency (typical curve) Axis Title 10 Axis Title Pitch = 37.5 mm 10 10000 10000 Pitch = 52.5 mm 1 1 1st line 2nd line 1000 30 μF 2nd line Z (Ω) 1000 10 μF 0.1 30 μF 0.1 70 μF 100 0.01 0.001 10 000 10 10 000 000 1st line 2nd line 2nd line Factor 80 Ambient Temperature (°C) 1.2 2nd line Z (Ω) 60 100 0.01 100 000 1 000 000 10 10 000 000 0.001 10 000 100 000 1 000 000 f (Hz) f (Hz) Impedance vs. frequency (typical curve) Impedance vs. frequency (typical curve) Revision: 19-May-2021 10 10 000 000 Document Number: 28172 10 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: MKP1847C AC Filtering MKP1847 AC Filtering www.vishay.com Vishay Roederstein CHARACTERISTICS Axis Title Axis Title 1000 1000 10000 100 10000 100 1st line 2nd line 2nd line VRMS (V) 1 μF 30 μF 70 μF 10 1000 1st line 2nd line 2nd line VRMS (V) 1000 1 μF 25 μF 60 μF 10 100 100 1 1 0.1 10 100 1000 10 000 10 100 000 0.1 10 100 1000 10 000 f (Hz) f (Hz) Maximum RMS voltage as function of frequency Tamb ≤ 85 °C; Un = 230 VAC Maximum RMS voltage as function of frequency Tamb ≤ 85 °C; Un = 250 VAC Axis Title Axis Title 1000 1000 10000 100 10000 100 1st line 2nd line 2nd line VRMS (V) 1 μF 20 μF 50 μF 10 1000 1st line 2nd line 2nd line VRMS (V) 1000 1 μF 15 μF 35 μF 10 100 100 1 1 0.1 10 100 1000 10 000 10 100 000 0.1 10 100 1000 10 000 10 100 000 f (Hz) f (Hz) Maximum RMS voltage as function of frequency Tamb ≤ 85 °C; Un = 275 VAC Maximum RMS voltage as function of frequency Tamb ≤ 85 °C; Un = 310 VAC Axis Title Axis Title 1000 1000 10000 100 10000 100 1st line 2nd line 2nd line VRMS (V) 1 μF 12 μF 30 μF 10 1000 1st line 2nd line 1000 2nd line VRMS (V) 10 100 000 1 μF 5 μF 12 μF 10 100 1 100 1 0.1 10 100 1000 10 000 10 100 000 0.1 10 100 1000 10 000 10 100 000 f (Hz) f (Hz) Maximum RMS voltage as function of frequency Tamb ≤ 85 °C; Un = 350 VAC Maximum RMS voltage as function of frequency Tamb ≤ 85 °C; Un = 440 VAC Revision: 19-May-2021 Document Number: 28172 11 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: MKP1847C AC Filtering MKP1847 AC Filtering www.vishay.com Vishay Roederstein HEAT CONDUCTIVITY DIMENSIONS (mm) h 19.0 21.0 23.0 25.0 28.0 31.0 35.5 38.5 44.0 45.0 45.0 45.0 50.0 45.0 w 9.0 11.0 13.0 15.0 18.0 21.0 18.5 21.5 24.0 30.0 25.0 30.0 35.0 45.0 l 32.0 32.0 32.0 32.0 32.0 32.0 43.0 43.0 42.0 42.0 57.5 57.5 57.5 57.5 HEAT CONDUCTIVITY (mW/°C) PITCH 27.5 mm PITCH 37.5 mm PITCH 52.5 mm 16 19 22 25 30 35 45 51 59 68 77 85 100 108 Power Dissipation and Maximum Component Temperature Rise The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The component temperature rise (ΔT) can be measured or calculated by ΔT = P/G: • ΔT = component temperature rise (°C) with a maximum of 15 °C • P = power dissipation of the component (mW) • G = heat conductivity of the component (mW/°C) MEASURING THE COMPONENT TEMPERATURE Thermocouple The case temperature is measured in unloaded (Tamb) and maximum loaded condition (TC). The temperature rise is given by ΔT = TC - Tamb. To avoid thermal radiation or convection, the capacitor must be tested in a closed area from air circulation. APPLICATION NOTE AND LIMITING CONDITIONS These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: • The peak voltage (UP+) shall not be greater than √2 x URMS • The peak-to-peak ripple voltage (UPP) shall not be greater than 2 x √2 x URMS (for URMS consult above graph: Maximum RMS Voltage as Function of Frequency) • The voltage pulse slope (dU/dt) shall not exceed the rated pulse slope at the DC voltage rating. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by UNDC and divided by the applied voltage. For all other pulses following equation must be fulfilled: T 2 dU dU 2 x   ------- x dt < U NDC x  -------  dt   dt  rated 0 T is the pulse duration • The maximum component surface temperature must be lower than 105 °C and maximum temperature rise between case and free air ambient shall be lower than 15 °C. • For continuous operation, 24 hours per day for several years, please refer to application note: www.vishay.com/doc?28245 Revision: 19-May-2021 Document Number: 28172 12 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: MKP1847C AC Filtering MKP1847 AC Filtering www.vishay.com Vishay Roederstein INSPECTION REQUIREMENTS General Notes Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 61071”. SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS ROUTINE TEST - FINAL INSPECTION 5.14.2.1 External inspection, visual examination Legible marking as specified 5.14.2.2 Dimensions See specification drawing 5.3.1 Capacitance 1 kHz at room temperature See specific reference data 5.3.2 tan δ 1 kHz at room temperature 10 kHz at room temperature See specific reference data 5.5.1.2 DC voltage test between terminals 1.5 x UNDC at Tamb Duration 10 s No visible damage or puncture No flashover 5.6.1 Voltage test between terminals and case 2200 VAC (50 Hz), 60 s No visible damage or puncture No flashover 5.7 Insulation resistance Measuring voltage 500 V at room temperature Duration 1 min See specific reference data Legible marking and finish as specified Dimensions: see specific drawing TYPE TESTS 5.14.2 External inspection Check for finish, marking, and overall dimensions 5.14.0 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz 5.14.1.1.4 Robustness of terminations IEC 60068-2-21 Tensile Ua1: duration 10 s ± 1 s Wire diameter Section Load d ≤ 0.80 mm S ≤ 0.5 mm2 10 N (± 10 %) d ≤ 1.25 mm S ≤ 1.2 mm2 20 N (± 10 %) Bending Ub method 1: 4 x 90 °, duration 2 s to 3 s/bend Wire diameter Section modules Load d ≤ 0.80 mm Zx ≤ 0.050 mm3 5 N (± 10 %) d ≤ 1.25 mm Zx ≤ 0.019 mm3 10 N (± 10 %) 5.14.1.6 Resistance to soldering heat IEC 60068-2-20 No predrying, method 1A Solder bath: 280 °C ± 5 °C Duration 10 s ± 1 s 5.14.4 Final measurements Capacitance tan δ 5.14.0 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz 5.14.3.1 Vibration IEC 60068-2-6 f = 10 Hz to 55 Hz; amplitude ± 0.35 mm or acceleration 98 m/s2 Test duration: 10 frequency cycles, 3 axes offset from each other by 90° 1 octave/min Visual examination Revision: 19-May-2021 |ΔC/C| ≤ 0.5 % Increase of tan δ ≤ 0.0050 Compared to values measured in 5.14.0 No visible damage Document Number: 28172 13 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: MKP1847C AC Filtering MKP1847 AC Filtering www.vishay.com Vishay Roederstein SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS TYPE TESTS 5.14.3.2 Shock or impact IEC 60068-2-6 Pulse shape: half sine Acceleration: 490 m/s2 Duration of pulse: 11 ms Visual examination 5.14.4 Final measurements Capacitance tan δ 5.5.3.1 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz R insulation 5.5.3.2 DC voltage test between terminals 1.5 x UNDC at Tamb Duration 10 s 5.5.3.3 Final measurements Capacitance tan δ R insulation 5.9.1 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz 5.9.2 Surge discharge test 1.1 x UNDC Number of discharges: 5 Time lapse: every 2 min (10 min total) 5.9.3 DC voltage test between terminals Within 5 min after the surge discharge test 1.5 x UNDC at Tamb, duration 10 s 5.9.4 Final measurements Capacitance tan δ at 10 kHz No visible damage |ΔC/C| ≤ 0.5 % Increase of tan δ ≤ 0.0050 Compared to values measured in 5.14.0 |ΔC/C| ≤ 0.5 % Increase of tan δ ≤ 0.0050 R insulation ≥ 50 % of specified values |ΔC/C| ≤ 1.0 % tan δ ≤ 1.2 x initial tan δ + 0.0001 Compared to values measured in 5.9.1 5.11.1 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz 5.11.2 Self healing test 1.5 x UNDC, duration 10 s Increase the voltage at 100 V/s till 5 clearings occur or until voltage reach max. of 2.5 x UNDC, for a duration of 10 s 5.11.3 Final measurements Capacitance tan δ 5.13.0 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz 5.13.1 Change of temperature acc. to IEC 60068-2-14 Test Nb Tmax. = 85 °C Tmin. = -40 °C Transition time: 1 h, equivalent to 1 °C/min 5 cycles 5.13.2 Damp heat steady state acc. to IEC 60068-2-78 Test Ca T = 40 °C ± 2 °C RH = 93 % ± 3 % Duration 56 days 5.5.3.2 DC voltage test between terminals 1.5 x UNDC at ambient temperature Duration 10 s 5.13.3 Final measurements Visual examination No puncturing or flashover Self healing punctures are permitted Capacitance tan δ at 10 kHz |ΔC/C| ≤ 2.0 % Increase of tan δ ≤ 0.0150 Compared to values measured in 5.13.0 Revision: 19-May-2021 |ΔC/C| ≤ 0.5 % tan δ ≤ 1.2 x initial tan δ + 0.0001 Compared to values measured in 5.11.1 Document Number: 28172 14 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: MKP1847C AC Filtering MKP1847 AC Filtering www.vishay.com Vishay Roederstein SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS TYPE TESTS 5.10.0 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz 5.10.1 Thermal stability test under overload conditions Natural cooling Tamb ± 5 °C 1.21 x Pmax. = (U2/2) x w2 x C x tan δ2 = 1.21 x (I2RMS./w2 x C) x tan δ2 with w2 = 2 x π x f2 for I = IRMS. (see specific reference data) f2 = 10 kHz Duration 48 h Measure the temperature every 1.5 h during the last 6 hours Temperature rise < 1 °C 5.10.2 Final measurements Capacitance tan δ at 10 kHz |ΔC/C| ≤ 2.0 % Increase of tan δ ≤ 0.0150 5.12 Resonance frequency measurement Impedance analyzer at Tamb > 0.9 times the value as specified in typical curve “Resonant frequency” of this specification 5.15.0 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz 5.15.1 Endurance test between terminals Sequence 1.25 x UNAC at Tmax. = 85 °C 1.25 x UOPAC at 105 °C at Tmax. = 105 °C Duration 500 h 1000 x discharge at 1.4 x î (maximum repetitive peak current in continuous operation) 1.25 x UNAC at Tmax. = 85 °C 1.25 x UOPAC at 105 °C at Tmax. = 105 °C Duration 500 h 5.15.2 Final measurements Capacitance tan δ 5.16.3.0A Initial measurements Capacitance at 1 kHz 5.16.3.1.A Destruction test sequence for non-segment film The capacitors must be put in an oven at Tmax. = 85 °C product enveloped with cheese cloth High DC voltage test 3 x UNDC or DC voltage until repetitive product healings occur Duration 15 min High AC voltage test ACRMS voltage = 1 x UNAC, with minimum of 250 VAC Duration 5 min Repeat destruction sequence 3 x 5.16.3.2.A Final measurements Revision: 19-May-2021 Visual examination |ΔC/C| ≤ 3.0 % Increase of tan δ ≤ 0.0150 Compared to values measured in 5.15.0 Audible healings or check healings with oscilloscope No puncturing, flashover or burning of the cheese cloth. Self-healing punctures are permitted Document Number: 28172 15 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Not for New Designs - Alternative Device: MKP1847C AC Filtering MKP1847 AC Filtering www.vishay.com SUB-CLAUSE NUMBER AND TEST Vishay Roederstein CONDITIONS PERFORMANCE REQUIREMENTS TYPE TESTS 5.16.3.0.B Initial measurements Capacitance at 1 kHz 5.16.3.1.B Destruction test sequence for segment film The capacitors must be put in an oven at Tmax. = 105 °C/2 h and cooled down Product enveloped with cheese cloth High DC voltage test (limited to 200 mA) 3 x UNDC with minimum 2000 VDC Duration 1 min Discharge the capacitor Duration 1 min High AC voltage test DC power supply capable of obtaining the desired breakdown voltage ACRMS voltage = 1 x UNAC Duration 15 s The above sequence shall be repeated until the test sample capacitance loss 5 % of its initial measurement in 5.16.3.0.B 5.16.3.2.B Final measurements Revision: 19-May-2021 Visual examination No burning of the cheese cloth. The dielectric must withstand the test sequence conducted. Document Number: 28172 16 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000