MKP1847C AC Filtering
www.vishay.com
Vishay Roederstein
AC Filtering Metalized Polypropylene Film Capacitor Radial Type
FEATURES
• Robustness under high humidity
• THB 40 °C, 93 % RH, 56 days at UNAC
• High peak current capabilities
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
APPLICATIONS
• AC filtering, UPS systems
• Renewable energy - grid interface
• Harmonic filter
• Welding equipment
QUICK REFERENCE DATA
Rated capacitance range
1 μF to 70 μF
Capacitance tolerance
± 10 %, other tolerances available on request
Maximum continuous AC voltage (50 Hz / 60 Hz) range, UNAC
230 VAC, 250 VAC, 275 VAC, 310 VAC, 350 VAC
Climatic testing class
40 / 85 / 56
Maximum application temperature
105 °C
Maximum permissible case temperature
105 °C
Reference standards
IEC 61071, IEC 60068
Dielectric
Polypropylene film
Electrodes
Metallized dielectric film
Construction
Mono construction
Encapsulation
Plastic case sealed with resin; flame retardant
Terminals
Tinned wire
Self inductance (LS)
< 1 nH per mm of lead spacing
Withstanding DC voltage between terminals (1)
1.5 UNDC for 10 s, cut off current 10 mA, rise time ≤ 1000 V/s
Insulation resistance
RC between leads, after 1 min > 10 000 s, measuring voltage: 500 V
Lifetime expectancy (2)
RT: < 10 x 109/h (10 per 109 component hours) at 0.5 x UNAC, 40 °C
Marking
Manufacturer’s name, C-value, tolerance, rated voltage, manufacturer’s
type designation, code for dielectric material, manufacturer location, year
and week
Notes
• For more detailed data and test requirements, contact dc-film@vishay.com
• For general information like characteristics and definitions used for film capacitors follow the link: www.vishay.com/doc?28147
(1) See document “Voltage Proof Test for Metalized Capacitors” (www.vishay.com/doc?28169)
(2) Statements about life time are based on calculations which are based on internal tests. They have to be understood exclusively as
estimations. Also due to external factors, the life time in the field application may deviate from the calculated life time.
See APPLICATION NOTES AND LIMITING CONDITIONS on page 12 for intended continuous mains voltage.
MAXIMUM AC VOLTAGE RATINGS (VRMS)
UNAC
230 V
250 V
275 V
310 V
UOPAC at 85 °C
230 V
250 V
275 V
310 V
350 V
UOPAC at 105 °C
160 V
175 V
190 V
210 V
240 V
Revision: 11-Feb-2022
350 V
Document Number: 26077
1
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP1847C AC Filtering
www.vishay.com
Vishay Roederstein
COMPOSITION OF CATALOG NUMBER
CAPACITANCE
(numerically)
MULTIPLIER
(nF)
MKP
10
4
Example
100
5
1000
6
512
1200 nF
1.2 μF
10 000
7
612
12 000 nF
12 μF
680
80 000 nF
80 μF
5
P
1847C
6
12
25
P1
(mm)
PITCH
CODE
27.5
K
37.5
P
52.5
Y
2
TYPE CONSTRUCTION
METALLIZED POLYPROPYLENE
TOLERANCE
VOLTAGE
5
UN = 23 = 230 VRMS
SPECIAL CODE FOR TERMINAL
± 10 %
2
2 pins
UN = 25 = 250 VRMS
4
4 pins P2 = 10.2 mm
UN = 27 = 275 VRMS
5
4 pins P2 = 20.3 mm
UN = 31 = 310 VRMS
(1)
Customized
UN = 35 = 350 VRMS
Note
(1) Tabs terminals or customized terminals are available on request
DIMENSIONS in millimeters
2 PINS
w
I
h
P1
6-1
Ø dt
P1 ± 0.4 - PCM 27.5 mm
P1 ± 0.5 - PCM ≥ 37.5 mm
4 PINS
w
I
Marking
P2
P2
h
P1
6-2
Ø dt
P1 ± 0.5
P2 ± 0.5
Note
• Ø dt ± 10 % of standard diameter specified
Revision: 11-Feb-2022
Document Number: 26077
2
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP1847C AC Filtering
www.vishay.com
Vishay Roederstein
ELECTRICAL DATA AND ORDERING CODE
UNAC
(V)
230
250
CAP
. (1)
(μF)
DIMENSION (2)
(mm)
w
h
2
3
4
5
6
7
8
9
10
10
12
15
20
22
25
30
30
35
40
45
50
55
60
65
70
11.0
13.0
15.0
18.0
18.0
18.0
21.0
21.0
20.0
18.5
18.5
21.5
24.0
24.0
30.0
30.0
25.0
25.0
30.0
30.0
35.0
35.0
35.0
45.0
45.0
21.0
23.0
25.0
28.0
28.0
28.0
31.0
31.0
35.0
35.5
35.5
38.5
44.0
44.0
45.0
45.0
45.0
45.0
45.0
45.0
50.0
50.0
50.0
45.0
45.0
2
3
4
5
6
7
8
9
5
6
7
8
9
10
12
15
20
22
25
15
20
22
25
30
35
40
45
50
55
60
11.0
13.0
15.0
18.0
18.0
21.0
21.0
20.0
18.5
18.5
18.5
18.5
18.5
18.5
18.5
21.5
30.0
30.0
30.0
25.0
25.0
25.0
25.0
30.0
30.0
35.0
35.0
35.0
45.0
45.0
21.0
23.0
25.0
28.0
28.0
31.0
31.0
35.0
35.5
35.5
35.5
35.5
35.5
35.5
35.5
38.5
45.0
45.0
45.0
45.0
45.0
45.0
45.0
45.0
45.0
50.0
50.0
50.0
45.0
45.0
Revision: 11-Feb-2022
P1
(mm)
P2
(mm)
(dV/dt) (3)
(V/μs)
IPEAK
(A)
IRMS (4)
(A)
tan δ
1 kHz
(< 10-4) (5)
tan δ
10 kHz
(< 10-4) (5)
ORDERING CODE (6)
2
4
2
4
2
4
l
PINS PINS PINS PINS PINS PINS
UOPAC AT 85 °C = 230 VRMS, UOPAC AT 105 °C = 160 VRMS, C-TOL. = ± 10 % (UNDC = 450 V)
32.0 27.5
45
90
3.5
7
30
MKP1847C 520 235K2
32.0 27.5
45
135
5.0
7
30
MKP1847C 530 235K2
32.0 27.5
45
180
6.0
7
30
MKP1847C 540 235K2
32.0 27.5
45
225
7.5
7
30
MKP1847C 550 235K2
32.0 27.5
45
270
8.0
7
30
MKP1847C 560 235K2
32.0 27.5
45
315
8.5
7
30
MKP1847C 570 235K2
32.0 27.5
45
360
10.0
7
30
MKP1847C 580 235K2
32.0 27.5
45
405
10.5
7
30
MKP1847C 590 235K2
32.0 27.5
45
450
11.5
7
30
MKP1847C 610 235K2
43.0 37.5
20
200
7.5
10
75
MKP1847C 610 235P2
43.0 37.5
20
240
8.5
10
75
MKP1847C 612 235P2
43.0 37.5
10.2
20
300
10.0 12.0
10
8
75
70
MKP1847C 615 235 P*
42.0 37.5
10.2
20
400
12.5 14.5
10
8
75
70
MKP1847C 620 235P*
42.0 37.5
10.2
20
440
13.0 15.5
10
8
75
70
MKP1847C 622 235P*
42.0 37.5
10.2 / 20.3
20
500
15.0 17.5
10
8
75
70
MKP1847C 625 235P*
42.0 37.5
10.2 / 20.3
20
600
16.5 19.0
10
8
75
70
MKP1847C 630 235P*
57.5 52.5
10.2
10
300
12.5 15.0
20
17
150
135
MKP1847C 630 235Y*
57.5 52.5
10.2
10
350
13.5 16.0
20
17
150
135
MKP1847C 635 235Y*
57.5 52.5
20.3
10
400
15.5 18.0
20
17
150
135
MKP1847C 640 235Y*
57.5 52.5
20.3
10
450
16.5 19.0
20
17
150
135
MKP1847C 645 235Y*
57.5 52.5
20.3
10
500
18.5 21.5
20
17
150
135
MKP1847C 650 235Y*
57.5 52.5
20.3
10
550
19.5 22.5
20
17
150
135
MKP1847C 655 235Y*
57.5 52.5
20.3
10
600
20.5 23.5
20
17
150
135
MKP1847C 660 235Y*
57.5 52.5
20.3
10
650
25.5
17
135 MKP1847C 665 235Y5
57.5 52.5
20.3
10
700
26.0
17
135 MKP1847C 670 235Y5
UOPAC AT 85 °C = 250 VRMS, UOPAC AT 105 °C = 175 VRMS, C-TOL. = ± 10 % (UNDC = 500 V)
32.0 27.5
50
100
4.0
7
25
MKP1847C 520 255K2
32.0 27.5
50
150
5.0
7
25
MKP1847C 530 255K2
32.0 27.5
50
200
6.0
7
25
MKP1847C 540 255K2
32.0 27.5
50
250
7.0
7
25
MKP1847C 550 255K2
32.0 27.5
50
300
7.5
7
25
MKP1847C 560 255K2
32.0 27.5
50
350
8.0
7
25
MKP1847C 570 255K2
32.0 27.5
50
400
9.0
7
25
MKP1847C 580 255K2
32.0 27.5
50
450
11.0
7
25
MKP1847C 590 255K2
43.0 37.5
25
125
7.0
10
70
MKP1847C 550 255P2
43.0 37.5
25
150
7.0
10
70
MKP1847C 560 255P2
43.0 37.5
25
175
7.0
10
70
MKP1847C 570 255P2
43.0 37.5
25
200
8.0
10
70
MKP1847C 580 255P2
43.0 37.5
25
225
8.0
10
70
MKP1847C 590 255P2
43.0 37.5
25
250
9.0
10
70
MKP1847C 610 255P2
43.0 37.5
25
300
10.0
10
70
MKP1847C 612 255P2
43.0 37.5
10.2
25
375
11.0 12.0
10
8
70
65
MKP1847C 615 255P*
42.0 37.5
10.2 / 20.3
25
500
14.0 15.0
10
8
70
65
MKP1847C 620 255P*
42.0 37.5
10.2 / 20.3
25
550
15.0 16.0
10
8
70
65
MKP1847C 622 255P*
42.0 37.5
10.2 / 20.3
25
625
16.0 17.0
10
8
70
65
MKP1847C 625 255P*
57.5 52.5
10.2
12
180
12.0 13.0
16
14
135
125
MKP1847C 615 255Y*
57.5 52.5
10.2
12
240
12.0 13.0
16
14
135
125
MKP1847C 620 255Y*
57.5 52.5
10.2
12
264
12.0 13.0
16
14
135
125
MKP1847C 622 255Y*
57.5 52.5
10.2
12
300
13.0 14.0
16
14
135
125
MKP1847C 625 255Y*
57.5 52.5
20.3
12
360
15.0 16.0
16
14
135
125
MKP1847C 630 255Y*
57.5 52.5
20.3
12
420
16.0 17.0
16
14
135
125
MKP1847C 635 255Y*
57.5 52.5
20.3
12
480
19.0 20.0
16
14
135
125
MKP1847C 640 255Y*
57.5 52.5
20.3
12
540
20.0 21.0
16
14
135
125
MKP1847C 645 255Y*
57.5 52.5
20.3
12
600
21.0 22.0
16
14
135
125
MKP1847C 650 255Y*
57.5 52.5
20.3
12
660
24.0
14
125 MKP1847C 655 255Y5
57.5 52.5
20.3
12
720
25.0
14
125 MKP1847C 660 255Y5
Document Number: 26077
3
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP1847C AC Filtering
www.vishay.com
Vishay Roederstein
ELECTRICAL DATA AND ORDERING CODE
UNAC
(V)
275
310
CAP
. (1)
(μF)
DIMENSION (2)
(mm)
w
h
2
3
4
5
6
7
5
6
7
8
9
10
12
15
20
15
20
22
25
30
35
40
45
50
13.0
15.0
18.0
21.0
21.0
20.0
18.5
18.5
18.5
18.5
18.5
21.5
21.5
24.0
30.0
25.0
25.0
25.0
30.0
30.0
35.0
35.0
45.0
45.0
23.0
25.0
28.0
31.0
31.0
35.0
35.5
35.5
35.5
35.5
35.5
38.5
38.5
44.0
45.0
45.0
45.0
45.0
45.0
45.0
50.0
50.0
45.0
45.0
1
2
3
4
5
5
6
7
8
9
10
12
15
10
12
15
20
22
25
30
35
11.0
15.0
18.0
21.0
21.0
18.5
18.5
18.5
21.5
21.5
21.5
24.0
30.0
25.0
25.0
25.0
30.0
35.0
35.0
45.0
45.0
21.0
25.0
28.0
31.0
31.0
35.5
35.5
35.5
38.5
38.5
38.5
44.0
45.0
45.0
45.0
45.0
45.0
50.0
50.0
45.0
45.0
Revision: 11-Feb-2022
l
P1
(mm)
P2
(mm)
(3)
(dV/dt)
(V/μs)
IPEAK
(A)
IRMS (4)
(A)
2
PINS
4
PINS
tan δ
1 kHz
(< 10-4) (5)
2
PINS
4
PINS
tan δ
10 kHz
(< 10-4) (5)
2
PINS
ORDERING CODE (6)
4
PINS
UOPAC AT 85 °C = 275 VRMS, UOPAC AT 105 °C = 190 VRMS, C-TOL. = ± 10 % (UNDC = 600 V)
32.0 27.5
55
110
4.5
5
25
MKP1847C 520 275K2
32.0 27.5
55
165
5.5
5
25
MKP1847C 530 275K2
32.0 27.5
55
220
7.0
5
25
MKP1847C 540 275K2
32.0 27.5
55
275
8.0
5
25
MKP1847C 550 275K2
32.0 27.5
55
330
9.0
5
25
MKP1847C 560 275K2
32.0 27.5
55
385
10.0
5
25
MKP1847C 570 275K2
43.0 37.5
30
150
7.0
8
65
MKP1847C 550 275P2
43.0 37.5
30
180
7.0
8
65
MKP1847C 560 275P2
43.0 37.5
30
210
8.0
8
65
MKP1847C 570 275P2
43.0 37.5
30
240
8.0
8
65
MKP1847C 580 275P2
43.0 37.5
30
270
9.0
8
65
MKP1847C 590 275P2
43.0 37.5
10.2
30
300
10.0 11.0
8
7
65
55
MKP1847C 610 275P*
43.0 37.5
10.2
30
360
11.0 12.0
8
7
65
55
MKP1847C 612 275P*
42.0 37.5
10.2
30
450
13.0 14.0
8
7
65
55
MKP1847C 615 275P*
42.0 37.5
10.2 / 20.3
30
600
16.0 17.0
8
7
65
55
MKP1847C 620 275P*
57.5 52.5
10.2
13
195
11.0 12.0
15
12
125
105
MKP1847C 615 275Y*
57.5 52.5
10.2
13
260
12.0 13.0
15
12
125
105
MKP1847C 620 275Y*
57.5 52.5
10.2
13
286
13.0 14.0
15
12
125
105
MKP1847C 622 275Y*
57.5 52.5
20.3
13
325
15.0 16.0
15
12
125
105
MKP1847C 625 275Y*
57.5 52.5
20.3
13
390
16.0 17.0
15
12
125
105
MKP1847C 630 275Y*
57.5 52.5
20.3
13
455
19.0 20.0
15
12
125
105
MKP1847C 635 275Y*
57.5 52.5
20.3
13
520
20.0 21.0
15
12
125
105
MKP1847C 640 275Y*
57.5 52.5
20.3
13
585
23.0
12
105 MKP1847C 645 275Y5
57.5 52.5
20.3
13
650
24.0
12
105 MKP1847C 650 275Y5
UOPAC AT 85 °C = 310 VRMS, UOPAC AT 105 °C = 210 VRMS, C-TOL. = ± 10 % (UNDC = 630 V)
32.0 27.5
68
68
3
5
20
MKP1847C 510 315 K2
32.0 27.5
68
136
5
5
20
MKP1847C 520 315 K2
32.0 27.5
68
204
7
5
20
MKP1847C 530 315 K2
32.0 27.5
68
272
8
5
20
MKP1847C 540 315 K2
32.0 27.5
68
340
9
5
20
MKP1847C 550 315 K2
43.0 37.5
35
175
7
7
55
MKP1847C 550 315 P2
43.0 37.5
35
210
8
7
55
MKP1847C 560 315 P2
43.0 37.5
35
245
9
7
55
MKP1847C 570 315 P2
43.0 37.5
10.2
35
280
10
11
7
6
55
50
MKP1847C 580 315 P*
43.0 37.5
10.2
35
315
10
11
7
6
55
50
MKP1847C 590 315 P*
43.0 37.5
10.2
35
350
11
12
7
6
55
50
MKP1847C 610 315 P*
42.0 37.5
10.2
35
420
12
13
7
6
55
50
MKP1847C 612 315 P*
42.0 37.5
10.2 / 20.3
35
525
15
16
7
6
55
50
MKP1847C 615 315 P*
57.5 52.5
10.2
15
150
10
11
12
10
105
90
MKP1847C 610 315 Y*
57.5 52.5
10.2
15
180
10
11
12
10
105
90
MKP1847C 612 315 Y*
57.5 52.5
10.2
15
225
12
13
12
10
105
90
MKP1847C 615 315 Y*
57.5 52.5
20.3
15
300
14
15
12
10
105
90
MKP1847C 620 315 Y*
57.5 52.5
20.3
15
330
16
17
12
10
105
90
MKP1847C 622 315 Y*
57.5 52.5
20.3
15
375
17
18
12
10
105
90
MKP1847C 625 315 Y*
57.5 52.5
20.3
15
450
21
10
90
MKP1847C 630 315 Y5
57.5 52.5
20.3
15
525
22
10
90
MKP1847C 635 315 Y5
Document Number: 26077
4
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP1847C AC Filtering
www.vishay.com
Vishay Roederstein
ELECTRICAL DATA AND ORDERING CODE
UNAC
(V)
350
CAP
. (1)
(μF)
1
2
3
4
5
6
7
8
9
10
12
10
12
15
20
22
25
30
DIMENSION (2)
(mm)
w
h
11.0
15.0
18.0
21.0
18.5
18.5
21.5
21.5
24.0
24.0
30.0
25.0
25.0
25.0
30.0
35.0
35.0
45.0
21.0
25.0
28.0
31.0
35.5
35.5
38.5
38.5
44.0
44.0
45.0
45.0
45.0
45.0
45.0
50.0
50.0
45.0
P1
(mm)
P2
(mm)
(3)
(dV/dt)
(V/μs)
IPEAK
(A)
IRMS (4)
(A)
tan δ
1 kHz
(< 10-4) (5)
tan δ
10 kHz
(< 10-4) (5)
2
4
2
4
2
4
l
PINS PINS PINS PINS PINS PINS
UOPAC AT 85 °C = 350 VRMS, UOPAC AT 105 °C = 240 VRMS, C-TOL. = ± 10 % (UNDC = 700 V)
32.0 27.5
100
100
3
7
20
32.0 27.5
100
200
5
7
20
32.0 27.5
100
300
7
7
20
32.0 27.5
100
400
9
7
20
43.0 37.5
50
250
7
7
50
43.0 37.5
50
300
8
7
50
43.0 37.5
10.2
50
350
9
10
7
6
50
45
43.0 37.5
10.2
50
400
10
11
7
6
50
45
42.0 37.5
10.2
50
450
11
12
7
6
50
45
42.0 37.5
10.2
50
500
12
13
7
6
50
45
42.0 37.5
10.2 / 20.3
50
600
14
15
7
6
50
45
57.5 52.5
10.2
25
250
10
11
12
10
100
85
57.5 52.5
10.2
25
300
11
12
12
10
100
85
57.5 52.5
10.2
25
375
12
13
12
10
100
85
57.5 52.5
20.3
25
500
15
16
12
10
100
85
57.5 52.5
20.3
25
550
17
18
12
10
100
85
57.5 52.5
20.3
25
625
18
19
12
10
100
85
57.5 52.5
20.3
25
750
22
10
85
ORDERING CODE (6)
MKP1847C 510 355 K2
MKP1847C 520 355 K2
MKP1847C 530 355 K2
MKP1847C 540 355 K2
MKP1847C 550 355 P2
MKP1847C 560 355 P2
MKP1847C 570 355 P*
MKP1847C 580 355 P*
MKP1847C 590 355 P*
MKP1847C 610 355 P*
MKP1847C 612 355 P*
MKP1847C 610 355 Y*
MKP1847C 612 355 Y*
MKP1847C 615 355 Y*
MKP1847C 620 355 Y*
MKP1847C 622 355 Y*
MKP1847C 625 355 Y*
MKP1847C 630 355 Y5
Notes
(1) Intermediate capacitance values available on request
(2) Standard dimension. For tolerances see chapter “Space Requirements for Printed-Circuit Board Applications and Dimension Tolerances”
(3) Rated voltage pulse slope (dU/dt) at voltage U
R
NDC
(4) Maximum RMS current at 10 kHz, +85 °C, capacitance tolerance specified
(5) Equivalent series resistance typical values at f = 10 kHz
(6) Change the “*” symbol with special code for the terminals
PACKAGING INFORMATION
UNAC
(V)
230
CAP. (1)
(μF)
2
3
4
5
6
7
8
9
10
10
12
15
20
22
25
30
30
35
40
45
50
55
60
65
70
Revision: 11-Feb-2022
Ø dt
(mm)
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
ORDERING CODE (2)
MKP1847C520235K2
MKP1847C530235K2
MKP1847C540235K2
MKP1847C550235K2
MKP1847C560235K2
MKP1847C570235K2
MKP1847C580235K2
MKP1847C590235K2
MKP1847C610235K2
MKP1847C610235P2
MKP1847C612235P2
MKP1847C615235P*
MKP1847C620235P*
MKP1847C622235P*
MKP1847C625235P*
MKP1847C630235P*
MKP1847C630235Y*
MKP1847C635235Y*
MKP1847C640235Y*
MKP1847C645235Y*
MKP1847C650235Y*
MKP1847C655235Y*
MKP1847C660235Y*
MKP1847C665235Y5
MKP1847C670235Y5
MASS
(g)
9
10
12
17
15
16
23
22
22
33
31
39
50
49
66
60
73
70
97
93
115
110
105
130
126
SPQ (3)
(pcs)
130
115
100
80
80
80
65
65
70
105
105
91
77
77
63
63
55
55
45
45
40
40
40
30
30
Document Number: 26077
5
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP1847C AC Filtering
www.vishay.com
Vishay Roederstein
PACKAGING INFORMATION
UNAC
(V)
250
275
CAP. (1)
(μF)
2
3
4
5
6
7
8
9
5
6
7
8
9
10
12
15
20
22
23
15
20
22
23
30
35
40
45
50
55
60
2
3
4
5
6
7
5
6
7
8
9
10
12
15
20
15
20
22
25
30
35
40
45
50
Revision: 11-Feb-2022
Ø dt
(mm)
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
0.8
0.8
0.8
0.8
0.8
0.8
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
ORDERING CODE (2)
MKP1847C520255K2
MKP1847C530255K2
MKP1847C540255K2
MKP1847C550255K2
MKP1847C560255K2
MKP1847C570255K2
MKP1847C580255K2
MKP1847C590255K2
MKP1847C550255P2
MKP1847C560255P2
MKP1847C570255P2
MKP1847C580255P2
MKP1847C590255P2
MKP1847C610255P2
MKP1847C612255P2
MKP1847C615255P*
MKP1847C620255P*
MKP1847C622255P*
MKP1847C625255P*
MKP1847C615255Y*
MKP1847C620255Y*
MKP1847C622255Y*
MKP1847C625255Y*
MKP1847C630255Y*
MKP1847C635255Y*
MKP1847C640255Y*
MKP1847C645255Y*
MKP1847C650255Y*
MKP1847C655255Y5
MKP1847C660255Y5
MKP1847C520275K2
MKP1847C530275K2
MKP1847C540275K2
MKP1847C550275K2
MKP1847C560275K2
MKP1847C570275K2
MKP1847C550275P2
MKP1847C560275P2
MKP1847C570275P2
MKP1847C580275P2
MKP1847C590275P2
MKP1847C610275P*
MKP1847C612275P*
MKP1847C615275P*
MKP1847C620275P*
MKP1847C615275Y*
MKP1847C620275Y*
MKP1847C622275Y*
MKP1847C625275Y*
MKP1847C630275Y*
MKP1847C635275Y*
MKP1847C640275Y*
MKP1847C645275Y5
MKP1847C650275Y5
MASS
(g)
9
10
12
17
15
22
21
21
36
35
34
33
32
31
28
35
65
62
59
84
78
76
73
100
93
114
108
102
126
121
11
12
17
23
21
21
35
33
32
31
29
39
36
47
59
80
73
71
99
92
112
103
126
116
SPQ (3)
(pcs)
130
115
100
80
80
65
65
70
105
105
105
105
105
105
105
91
63
63
63
55
55
55
55
45
45
40
40
40
30
30
115
100
80
65
65
70
105
105
105
105
105
91
91
77
63
55
55
55
45
45
40
40
30
30
Document Number: 26077
6
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP1847C AC Filtering
www.vishay.com
Vishay Roederstein
PACKAGING INFORMATION
UNAC
(V)
CAP. (1)
(μF)
Ø dt
(mm)
ORDERING CODE (2)
1
0.8
2
0.8
3
310
350
MASS
(g)
SPQ (3)
(pcs)
MKP1847C510315K2
9
130
MKP1847C520315K2
13
100
0.8
MKP1847C530315K2
17
80
4
0.8
MKP1847C540315K2
23
65
5
0.8
MKP1847C550315K2
21
65
5
1.0
MKP1847C550315P2
33
105
6
1.0
MKP1847C560315P2
31
105
7
1.0
MKP1847C570315P2
30
105
8
1.0
MKP1847C580315P*
39
91
9
1.0
MKP1847C590315P*
37
91
10
1.0
MKP1847C610315P*
35
91
12
1.0
MKP1847C612315P*
48
77
15
1.0
MKP1847C615315P*
61
63
10
1.2
MKP1847C610315Y*
84
55
12
1.2
MKP1847C612315Y*
80
55
15
1.2
MKP1847C615315Y*
75
55
20
1.2
MKP1847C620315Y*
98
45
22
1.2
MKP1847C622315Y*
122
40
23
1.2
MKP1847C623315Y*
116
40
30
1.2
MKP1847C630315Y5
135
30
35
1.2
MKP1847C635315Y5
128
30
1
0.8
MKP1847C510355K2
9
130
2
0.8
MKP1847C520355K2
12
100
3
0.8
MKP1847C530355K2
16
80
4
0.8
MKP1847C540355K2
22
65
5
1.0
MKP1847C550355P2
32
105
6
1.0
MKP1847C560355P2
29
105
7
1.0
MKP1847C570355P*
38
91
8
1.0
MKP1847C580355P*
36
91
9
1.0
MKP1847C590355P*
49
77
10
1.0
MKP1847C610355P*
47
77
12
1.0
MKP1847C612355P*
63
63
10
1.2
MKP1847C610355Y*
80
55
12
1.2
MKP1847C612355Y*
76
55
15
1.2
MKP1847C615355Y*
71
55
20
1.2
MKP1847C620355Y*
93
45
22
1.2
MKP1847C622355Y*
115
40
23
1.2
MKP1847C623355Y*
107
40
30
1.2
MKP1847C630355Y5
126
30
Notes
(1) Intermediate capacitance values available on request
(2) Change the “*” symbol with special code for the terminals
(3) SPQ = Standard Packing Quantity
Revision: 11-Feb-2022
Document Number: 26077
7
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP1847C AC Filtering
www.vishay.com
Vishay Roederstein
CONSTRUCTION
Low inductive wound cell elements of metallized polypropylene film, potted with resin in a flame retardant case.
SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK
The capacitor unit is designed for mounting on a printed circuit board.
In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the printed
circuit board.
The capacitors shall be mechanically fixed by the leads and the body clamped.
SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD AND DIMENSIONS TOLERANCES
For the maximum product dimensions and maximum space requirements for length (lmax.), width (wmax.) following tolerances
must be taken in account in the envelopment of the components as shown in the drawings below:
Lmax. = l + Δl
Wmax. = w + Δw
Wmax.
P2
2 x P2 ± 0.5 mm
3 x P2 ± 0.5 mm
4 x P2 ± 0.5 mm
5 x P2 ± 0.5 mm
Lmax.
P1
ØD
P1 (mm)
27.5
37.5
52.5
Lmax. (mm)
I+2
I+3
I+4
Wmax. (mm)
w + 1.6
w + 2.0
w + 2.4
Ø D (mm)
1.2
1.5
1.7
Δh (mm)
0.2
0.5
0.5
For the maximum height hmax., a Δh of 0.5 mm must be taken in account on the height dimension h.
For the minimum product dimensions for length (lmin.), width (wmin.), and height (hmin.) following tolerances of the components
are valid:
lmin. = l - Δl, wmin. = w - Δw and hmin. = h - Δh
For products with pitch = 27.5 mm, Δl = 1.5 mm, and Δw = Δh = 0.5 mm
For products with pitch = 37.5 mm, Δl = 1.5 mm, and Δw = Δh = 1.0 mm
For products with pitch = 52.5 mm, Δl = 1.5 mm, and Δw = Δh = 1.0 mm
SOLDERING CONDITIONS
For general soldering conditions and wave soldering profile we refer to the document “Characteristics and Definitions Used for
Film Capacitors”: www.vishay.com/doc?26033.
STORAGE TEMPERATURE
Tstg = -23 °C to +35 °C with relative humidity of maximum 75 % without condensation
RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity of 50 % ± 2 %.
Revision: 11-Feb-2022
Document Number: 26077
8
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP1847C AC Filtering
www.vishay.com
Vishay Roederstein
CHARACTERISTICS
Axis Title
Axis Title
4
100 000
10000
10000
3
2
-1
-2
1st line
2nd line
1000
2nd line
RC (s)
1000
0
1st line
2nd line
2nd line
ΔC/C (%)
1
10 000
100
-3
100
-4
-5
10
-6
-60 -40 -20
0
20
40
60
10
1000
80 100 120
0
20
40
60
80
100
Tamb (°C)
Tamb (°C)
Capacitance as a function of ambient temperature
(typical)
Insulation resistance as a function
of ambient temperature (typical)
Axis Title
Axis Title
10000
1.2
10000
100
Pitch = 27.5 mm
1.0
5 μF
10 μF
0.1
100
0.4
100
0.01
0.2
10
0
-80 -60 -40 -20
0
20
40
60
0.001
10 000
80 100 120
100 000
1 000 000
Tamb (°C)
f (Hz)
RMS voltage in function of temperature
Impedance vs. Frequency
(typical)
Axis Title
10000
100
Pitch = 37.5 mm
Pitch = 52.5 mm
10
5 μF
1st line
2nd line
30 μF
2nd line
Z (Ω)
1000
15 μF
1
25 μF
0.1
100
0.01
1000
10 μF
1
1st line
2nd line
10
0.1
10
10 000 000
Axis Title
10000
100
2nd line
Z (Ω)
1000
1
1st line
2nd line
1st line
2nd line
0.6
2nd line
Z (Ω)
1000
0.8
2nd line
Factor
1 μF
10
100
70 μF
0.01
0.001
10 000
100 000
1 000 000
10
10 000 000
0.001
10 000
100 000
1 000 000
f (Hz)
f (Hz)
Impedance vs. Frequency
(typical)
Impedance vs. Frequency
(typical)
Revision: 11-Feb-2022
10
10 000 000
Document Number: 26077
9
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP1847C AC Filtering
www.vishay.com
Vishay Roederstein
Axis Title
Axis Title
1 μF
1000
1st line
2nd line
10
10000
100
1 μF
2nd line
VRMS (V)
100
2nd line
VRMS (V)
1000
10000
70 μF
10
60 μF
100
1
100
1
30 μF
10
100 000
0.1
10
100
1000
10 000
25 μF
0.1
10
100
1000
10 000
10
100 000
f (Hz)
f (Hz)
Maximum RMS voltage as function of frequency
Tamb ≤ 85 °C; Ur = 230 VAC
Maximum RMS voltage as function of frequency
Tamb ≤ 85 °C; Ur = 250 VAC
Axis Title
Axis Title
1000
1000
10000
20 μF
10
15 μF
100
35 μF
50 μF
1
100
1000
100
1
10
100 000
0.1
10
1000
1st line
2nd line
1 μF
1000
1st line
2nd line
10
10000
100
1 μF
2nd line
VRMS (V)
100
2nd line
VRMS (V)
1000
1st line
2nd line
1000
10 000
0.1
10
100
1000
10 000
10
100 000
f (Hz)
f (Hz)
Maximum RMS voltage as function of frequency
Tamb ≤ 85 °C; Ur = 275 VAC
Maximum RMS voltage as function of frequency
Tamb ≤ 85 °C; Ur = 310 VAC
Axis Title
1000
10000
100
10
1000
1st line
2nd line
2nd line
VRMS (V)
1 μF
12 μF
30 μF
100
1
0.1
10
100
1000
10 000
10
100 000
f (Hz)
Maximum RMS current as function of frequency
Tamb ≤ 85 °C; Ur = 350 VAC
Revision: 11-Feb-2022
Document Number: 26077
10
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP1847C AC Filtering
www.vishay.com
Vishay Roederstein
Axis Title
Axis Title
100
100
10000
10000
70 μF
60 μF
10
10
1000
25 μF
1st line
2nd line
1
2nd line
IRMS (A)
1st line
2nd line
2nd line
IRMS (A)
1000
30 μF
1
100
100
1 μF
0.1
10
100 000
0.01
100
1 μF
0.1
1000
10 000
0.01
100
1000
10 000
f (Hz)
f (Hz)
Maximum RMS current as function of frequency
Tamb ≤ 85 °C; Ur = 230 VAC
Maximum RMS current as function of frequency
Tamb ≤ 85 °C; Ur = 250 VAC
Axis Title
Axis Title
100
100
10000
10000
50 μF
10
35 μF
10
1000
1000
2nd line
IRMS (A)
1
15 μF
1
100
1 μF
0.1
100
1000
10
100 000
10 000
100
1 μF
0.1
0.01
1st line
2nd line
20 μF
1st line
2nd line
2nd line
IRMS (A)
10
100 000
0.01
100
1000
10 000
10
100 000
f (Hz)
f (Hz)
Maximum RMS current as function of frequency
Tamb ≤ 85 °C; Ur = 275 VAC
Maximum RMS current as function of frequency
Tamb ≤ 85 °C; Ur = 310 VAC
Axis Title
100
10000
30 μF
10
1st line
2nd line
2nd line
IRMS (A)
1000
12 μF
1
100
1 μF
0.1
0.01
100
1000
10 000
10
100 000
f (Hz)
Maximum RMS current as function of frequency
Tamb ≤ 85 °C; Ur = 350 VAC
Revision: 11-Feb-2022
Document Number: 26077
11
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP1847C AC Filtering
www.vishay.com
Vishay Roederstein
HEAT CONDUCTIVITY
w
9.0
11.0
13.0
15.0
18.0
21.0
20.0
18.5
21.5
24.0
30.0
25.0
30.0
35.0
45.0
DIMENSION (mm)
h
19.0
21.0
23.0
25.0
28.0
31.0
35.0
35.5
38.5
44.0
45.0
45.0
45.0
50.0
45.0
l
32.0
32.0
32,0
32.0
32.0
32.0
32.0
43.0
43.0
42.0
42.0
57.5
57.5
57.5
57.5
G
(mW/°C)
16
19
22
25
30
35
37
45
52
59
68
78
85
100
109
POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE
The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function
of the free air ambient temperature.
The component temperature rise (ΔT) can be measured or calculated by ΔT = P/G:
• ΔT = component temperature rise (°C) with a maximum of 15 °C
• P = power dissipation of the component (mW)
• G = heat conductivity of the component (mW/°C)
MEASURING THE COMPONENT TEMPERATURE
Thermocouple
The case temperature is measured in unloaded (Tamb) and loaded condition (TC).
The temperature rise is given by ΔT = TC - Tamb.
To avoid thermal radiation or convection, the capacitor must be tested in a closed area from air circulation.
APPLICATION NOTES AND LIMITING CONDITIONS
• These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection
• These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression
capacitors conforming the standards must be used
• To ensure withstanding high humidity requirements in the application the epoxy adhesion at the leads shall not be damaged.
Therefore the leads may not be damaged or not be bent before soldering
• To choose a component family please refer to Vishay application note: www.vishay.com/doc?28245 and note additionally
following conditions:
- The peak voltage (Up+) shall not be greater than 2 x U RMS
- The peak-to-peak ripple voltage (Upp) shall not be greater than 2 x 2 x U RMS
- The voltage pulse slope (dU/dt) shall not exceed the rated pulse slope at the DC voltage rating
If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by UNDC and divided
by the applied voltage.
T
2
dU
dU
2 x ------- x dt < U NDC x -------
dt
dt rated
0
T is the pulse duration
• The maximum component surface temperature must be lower than 105 °C and maximum temperature rise between case and
free air ambient shall be lower than 15 °C
• For continuous operation, 24 hours per day for several years, please refer to application note: www.vishay.com/doc?28245
Revision: 11-Feb-2022
Document Number: 26077
12
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP1847C AC Filtering
www.vishay.com
Vishay Roederstein
INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
ROUTINE TEST - FINAL INSPECTION
5.14.2-1
External inspection, visual examination
CONDITIONS
PERFORMANCE REQUIREMENTS
Legible marking as specified
5.14.2-2
Dimensions
See specification drawing
5.3-1
Capacitance
1 kHz at room temperature
See specific reference data
5.3-2
tan δ
10 kHz at room temperature
See specific reference data
5.5.1-2
DC voltage test between terminals
1.5 x UNDC at Tamb
Duration: 2 s
No visible damage or puncture
No flashover
5.7
Insulation resistance
Measuring voltage 500 V at room
temperature
Duration: 1 min
See specific reference data
TYPE TESTS
5.14.2
External inspection
Check for finish, marking, and overall
dimensions
Legible marking and finish as specified
Dimensions: see specification drawing
5.14.0
Initial measurements
Capacitance at 1 kHz
tan δ at 10 kHz
5.14.1-1/4
Robustness of terminations
IEC 60068-2-21
Tensile Ua1
Wire diameter
Section
d ≤ 0.80 mm
S ≤ 0.5
d ≤ 1.23 mm
S ≤ 1.2 mm2
mm2
Load
10 N
(± 10 %)
20 N
(± 10 %)
Duration: 10 s ± 1 s
Bending, Ub method 1
Wire diameter Section modulus
d ≤ 0.80 mm
Zx ≤ 0.050 mm3
d ≤ 1.23 mm
Zx ≤ 0.019 mm3
Load
5N
(± 10 %)
10 N
(± 10 %)
4 x 90°, duration: 2 s to 3 s/bend
5.14.1-6
Resistance to soldering heat
IEC 60068-2-20
No pre-drying, method 1A
Solder bath: 280 °C ± 5 °C
Duration: 10 s ± 1 s
5.14.4
Final measurements
Capacitance
tan δ
5.14.0
Initial measurements
Capacitance at 1 kHz
tan δ at 10 kHz
5.14.3-1
Vibration
IEC 60068-2-6
10 Hz to 55 Hz; a = ± 0.35 mm or
acceleration 98 m/s2
Test duration: 10 frequency cycles
(3 axes offset from each other by 90°)
1 octave/min
Visual examination
|ΔC/C| ≤ 0.5 %
Increase of tan δ ≤ 0.0050
compared to the values measured in 5.14.0
No visible damage
5.14.3-2
Shock or impact
IEC 60068-2-6
Pulse shape: half sine
Acceleration: 490 m/s2
Duration of pulse: 11 ms
5.14.4
Final measurements
Visual examination
No visible damage
Capacitance
tan δ
|ΔC/C| ≤ 0.5 %
Increase of tan δ ≤ 0.0050
compared to the values measured in 5.14.0
Revision: 11-Feb-2022
Document Number: 26077
13
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP1847C AC Filtering
www.vishay.com
Vishay Roederstein
INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
5.5.3-1
Initial measurements
CONDITIONS
Capacitance at 1 kHz
tan δ at 10 kHz
Insulation resistance
5.5.3-2
DC voltage test between terminals
1.5 x UNDC at Tamb
Duration: 10 s
5.5.3-3
Final measurements
Capacitance
tan δ
Insulation resistance
Capacitance at 1 kHz
tan δ at 10 kHz
5.9-1
Initial measurements
PERFORMANCE REQUIREMENTS
|ΔC/C| ≤ 0.5 %
Increase of tan δ ≤ 0.0050
Insulation resistance ≥ 50 % of specified values
5.9-2
Surge discharge test
1.1 x UNDC
Number of discharges: 5
Time lapse: every 2 min (10 min total)
5.9-2
DC voltage test between terminals
Within 5 min after the surge discharge test
Duration: 10 s
1.5 x UNDC at Tamb
5.9-3
Final measurements
Capacitance
tan δ
5.11-1
Initial measurements
Capacitance at 1 kHz
tan δ at 10 kHz
5.11-2
Self healing test
1.5 x UNDC, duration: 10 s
Increase the voltage at 100 V/s till
5 clearings occur or until voltage reach
max. of 2.5 x UNDC for a duration of 10 s
Number of clearings ≤ 5
Clearing = voltage drop of 5 %
5.11-3
Final measurements
Capacitance
tan δ
|ΔC/C| ≤ 0.5 %
tan δ ≤ 1.2 x initial tan δ + 0.0001
compared to the values measured in 5.11-1
5.13-0
Initial measurements
Capacitance at 1 kHz
tan δ at 10 kHz
5.13-1
Change of temperature according to
IEC 60068-2-14
Test Nb
Tmax. = +85 °C
Tmin. = -40 °C
Transition time: 1 h, equivalent to 1 °C/min.
5 cycles
5.13.2
Damp heat steady state according to
IEC 60068-2-78
Test Ca
T = 40 °C ± 2 °C
RH = 93 % ± 3 %
Duration: 56 days
5.5.3-2
DC voltage test between terminals
1.5 x UNDC at ambient temperature
Duration: 10 s
5.13-3
Final measurements
Visual examination
No puncturing or flashover
Self healing punctures are permitted
Capacitance
tan δ
|ΔC/C| ≤ 2.0 %
Increase of tan δ ≤ 0.0150
compared to the values measured in 5.13-0
5.13A-0
Initial measurements
Capacitance at 1 kHz
tan δ at 1 kHz
5.13A.2
Damp heat steady state with load
T = 40 °C
RH = 93 % at UN
Duration: 56 days
5.13.3
Final measurements
Capacitance at 1 kHz
tan δ
Insulation resistance
Revision: 11-Feb-2022
|ΔC/C| ≤ 1.0 %
tan δ ≤ 1.2 x initial tan δ + 0.0001
compared to the values measured in 5.9-1
|ΔC/C| < 10 %
Increase of tan δ:
≤ 0.008 for: C ≤ 10 μF or
≤ 0.005 for: C > 10 μF
Compared to the values measured in 5.13A-0
Insulation resistance ≥ 50 % of specified values
Document Number: 26077
14
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MKP1847C AC Filtering
www.vishay.com
Vishay Roederstein
INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST
CONDITIONS
PERFORMANCE REQUIREMENTS
5.10-0
Initial measurements
Capacitance at 1 kHz
tan δ at 10 kHz
5.10-1
Thermal stability test under overload
conditions
Natural cooling Tamb ± 5 °C
1.21 x Pmax. = 1.21 x (I2RMS/w x C) x tan δ(f)
with w = 2 x π x f
For IRMS see specific reference data
f = 10 kHz
Duration: 48 h
5.10-2
Final measurements
Measure the temperature every 1.5 h
during the last 6 h
Temperature rise < 1 °C
Capacitance
tan δ at 10 kHz
|ΔC/C| ≤ 2 %
Increase of tan δ ≤ 0.0150
5.12
Resonance frequency measurement
Impedance analyzer at Tamb
> 0.9 times the value as specified in typical
curve “Resonant frequency” of this specification
5.15-0
Initial measurements
Capacitance at 1 kHz
tan δ at 10 kHz
5.15-1
Endurance test between terminals
Sequence:
1.25 x (URMS at 85 °C) at Tmax. = 85 °C
1.25 x (URMS at 105 °C) at Tmax. = 105 °C
Duration: 500 h
1000 x discharge at 1.4 x Î
(maximum peak current)
1.25 x (URMS at 85 °C) at Tmax. = 85 °C
1.25 x (URMS at 105 °C) at Tmax. = 105 °C
Duration: 500 h
5.15-2
Final measurement
Capacitance
tan δ
5.16.3-0
Initial measurements
Capacitance at 1 kHz
5.16.3-1
Destruction test sequence for
non-segmented film
The capacitors must be put in an oven at
Tmax. = 85 °C product enveloped with
cheese cloth
High DC voltage test
2 x UNDC or DC voltage until repetitive
product healings occur
Duration: 15 min
High AC voltage test
ACRMS voltage = 1 x UNAC, with minimum
of 250 VAC
Duration: 15 min
Repeat destruction sequence 3 x
5.16.3-2
Final measurements
Visual examination
|ΔC/C| ≤ 3.0 %
Increase of tan δ ≤ 0.0150
compared to the values measured in 5.15-0
Audible healings or check healings with
oscilloscope
No puncturing, flashover or burning of the
cheese cloth.
Self-healing punctures are permitted
Note
• Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 61071”
Revision: 11-Feb-2022
Document Number: 26077
15
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2023
1
Document Number: 91000
工商网监
湘ICP备2023018690号
