MKP1847H61031JP2

MKP1847H AC Filtering www.vishay.com Vishay Roederstein THB AC Filtering Metalized Polypropylene Film Capacitor Radial Type 85 °C / 85 % RH 1000 h at UNAC FEATURES • • • • • High robustness under high humidity THB 85 °C, 85 % RH, 1000 h at rated UNAC UL 810 (electrical pending) Segmented film Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • • • • • Outdoor applications UPS systems Renewable energy AC harmonic filter Welding equipment QUICK REFERENCE DATA Rated capacitance range 1 μF to 35 μF Capacitance tolerance ± 10 %, ± 5 % Maximum continuous AC voltage (50 Hz / 60 Hz) range, UNAC 250 VAC, 310 VAC, 350 VAC, 480 VAC Climatic testing class 40 / 105 / 56 B Rated temperature 85 °C Maximum permissible case temperature 105 °C Reference standards IEC 61071, IEC 60068, UL 810 Dielectric Polypropylene film Electrodes Metallized dielectric film Mono construction Series construction ≤ 310 VAC < Construction Encapsulation Plastic case sealed with resin; flame retardant Terminals Tinned wire Self inductance (LS) < 1 nH per mm of lead spacing Withstanding DC voltage between terminals (1) Insulation resistance 1.5 UNDC for 10 s, cut off current 10 mA, rise time ≤ 1000 V/s RC between leads, after 1 min > 10 000 s, measuring voltage: 500 V Life time expectancy (2) FIT: < 10 x 10-9/h (10 per 109 component hours) at 0.5 x UN, 40 °C C-value, tolerance, rated voltage, code for dielectric material, code for manufacturing origin, manufacturer’s type designation, manufacturer location, year and week, manufacturer’s logo or name Marking Notes • For more detailed data and test requirements, contact dc-film@vishay.com • For general information like characteristics and definitions used for film capacitors follow the link: www.vishay.com/doc?28147 (1) See document “Voltage Proof Test for Metalized Capacitors” (www.vishay.com/doc?28169) (2) Statements about life time are based on calculations which are based on internal tests. They have to be understood exclusively as estimations. Also due to external factors, the life time in the field application may deviate from the calculated life time. See APPLICATION NOTES AND LIMITING CONDITIONS on page 10 for intended continuous mains voltage. MAXIMUM AC VOLTAGE RATINGS (VRMS) UNAC 250 V 310 V 350 V UOPAC at 85 °C 250 V 310 V 350 V 480 V UOPAC at 105 °C 175 V 210 V 240 V 330 V Revision: 19-May-2021 480 V Document Number: 26067 1 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1847H AC Filtering www.vishay.com Vishay Roederstein COMPOSITION OF CATALOG NUMBER CAPACITANCE (numerically) MULTIPLIER (nF) MKP Example 100 5 1000 6 512 1200 nF 1.2 μF 10 000 7 620 20 000 nF 20 μF 680 80 000 nF 80 μF J P 1847H 6 20 25 P1 (mm) PITCH CODE 27.5 K 37.5 P 52.5 Y 2 TYPE CONSTRUCTION METALLIZED POLYPROPYLENE TOLERANCE VOLTAGE SPECIAL CODE FOR TERMINAL UN = 25 = 250 VAC J ±5% 2 2 pins UN = 31 = 310 VAC K ± 10 % 4 4 pins P2 = 10.2 mm UN = 35 = 350 VAC 5 4 pins P2 = 20.3 mm UN = 48 = 480 VAC (1) Customized Note (1) Tabs terminals or customized terminals are available on request DIMENSIONS in millimeters 2 PINS w I h P1 6-1 Ø dt P1 ± 0.4 - PCM 27.5 mm P1 ± 0.5 - PCM ≥ 37.5 mm 4 PINS w I Marking P2 P2 h P1 6-2 Ø dt P1 ± 0.5 P2 ± 0.5 Note • Ø dt ± 10 % of standard diameter specified Revision: 19-May-2021 Document Number: 26067 2 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1847H AC Filtering www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE UNAC CAP. (V) (μF) 250 310 350 480 DIMENSION (mm) w h 1 2 3 4 5 6 7 8 10 12 15 20 22 25 30 35 15.0 15.0 18.0 21.0 21.0 22.0 22.0 22.0 21.5 30.0 30.0 30.0 30.0 30.0 35.0 35.0 25.0 25.0 28.0 31.0 31.0 38.0 38.0 38.0 38.5 45.0 45.0 45.0 45.0 45.0 50.0 50.0 1 2 3 4 5 6 7 8 10 12 15 20 22 15.0 18.0 21.0 22.0 21.5 21.5 30.0 30.0 30.0 30.0 30.0 35.0 35.0 25.0 28.0 31.0 38.0 38.5 38.5 45.0 45.0 45.0 45.0 45.0 50.0 50.0 1 2 3 4 5 6 7 8 10 12 15 20 22 15.0 18.0 21.0 22.0 21.5 21.5 30.0 30.0 30.0 30.0 30.0 35.0 35.0 25.0 28.0 31.0 38.0 38.5 38.5 45.0 45.0 45.0 45.0 45.0 50.0 50.0 2 3 4 5 6 7 21.5 30.0 30.0 30.0 35.0 35.0 38.5 45.0 45.0 45.0 50.0 50.0 P1 (mm) P2 (mm) (dU/dt)R (1) (V/μs) IPEAK (A) IRMS (2) (A) ESR (3) 10 kHz (mΩ) tan δ (4) 10 kHz < (x 10-4) ORDERING CODE (5) 2 4 2 4 2 4 l PINS PINS PINS PINS PINS PINS UOPAC AT 85 °C = 250 VAC, UOPAC AT 105 °C = 175 VAC, C-TOL. = ± 10 % (UNDC = 500 V) 32.0 27.5 50 50 3 29.5 30 MKP1847H51025+K2 32.0 27.5 50 100 4.5 15 30 MKP1847H52025+K2 32.0 27.5 50 150 6.5 10 30 MKP1847H53025+K2 32.0 27.5 50 200 8 7.5 30 MKP1847H54025+K2 32.0 27.5 50 250 9 6 30 MKP1847H55025+K2 32.0 27.5 50 300 10.5 5 30 MKP1847H56025+K2 32.0 27.5 50 350 11.5 4.5 30 MKP1847H57025+K2 32.0 27.5 50 400 12 4 30 MKP1847H58025+K2 42.0 37.5 10.2 25 250 9.5 11 7.5 6.5 70 65 MKP1847H61025+P* 42.0 37.5 10.2 / 20.3 25 300 12.5 13.5 6 5.5 70 65 MKP1847H61225+P* 42.0 37.5 10.2 / 20.3 25 375 14 15 5 4.5 70 65 MKP1847H61525+P* 42.0 37.5 10.2 / 20.3 25 500 16 17.5 3.5 3 70 65 MKP1847H62025+P* 57.5 52.5 20.3 12 264 13 14.5 7 6 135 120 MKP1847H62225+Y* 57.5 52.5 20.3 12 300 14 15.5 6 5.5 135 120 MKP1847H62525+Y* 57.5 52.5 20.3 12 360 16.5 18 5 4.5 135 120 MKP1847H63025+Y* 57.5 52.5 20.3 12 420 18 19.5 4.5 3.5 135 120 MKP1847H63525+Y* UOPAC AT 85 °C = 310 VAC, UOPAC AT 105 °C = 210 VAC, C-TOL. = ± 10 % (UNDC = 630 V) 32.0 27.5 65 65 4 19 25 MKP1847H51031+K2 32.0 27.5 65 130 6.5 9.5 25 MKP1847H52031+K2 32.0 27.5 65 195 8.5 6.5 25 MKP1847H53031+K2 32.0 27.5 65 260 11 5 25 MKP1847H54031+K2 42.0 37.5 10.2 35 175 9 10 8.5 7.5 50 45 MKP1847H55031+P* 42.0 37.5 10.2 35 210 10 11 7 6 50 45 MKP1847H56031+P* 42.0 37.5 10.2 / 20.3 35 245 12.5 14 6 5.5 50 45 MKP1847H57031+P* 42.0 37.5 10.2 / 20.3 35 280 13.5 14.5 5 4.5 50 45 MKP1847H58031+P* 42.0 37.5 10.2 / 20.3 35 350 15 16.5 4 3.5 50 45 MKP1847H61031+P* 57.5 52.5 20.3 15 180 13 14.5 7 6 100 85 MKP1847H61231+Y* 57.5 52.5 20.3 15 225 14.5 16 5.5 5 100 85 MKP1847H61531+Y* 57.5 52.5 20.3 15 300 18 19.5 4 3.5 100 85 MKP1847H62031+Y* 57.5 52.5 20.3 15 330 19 20.5 4 3.5 100 85 MKP1847H62231+Y* UOPAC AT 85 °C = 350 VAC, UOPAC AT 105 °C = 240 VAC, C-TOL. = ± 10 % (UNDC = 700 V) 32.0 27.5 80 80 4.5 20.5 20 MKP1847H51035+K2 32.0 27.5 80 160 7 10.5 20 MKP1847H52035+K2 32.0 27.5 80 240 9 7 20 MKP1847H53035+K2 32.0 27.5 80 320 11.5 5.5 20 MKP1847H54035+K2 42.0 37.5 10.2 50 250 10.5 11 7.5 7.5 40 35 MKP1847H55035+P* 42.0 37.5 10.2 50 300 11.5 12.5 6.5 6 40 35 MKP1847H56035+P* 42.0 37.5 10.2 / 20.3 50 350 14 15 6 5.5 40 35 MKP1847H57035+P* 42.0 37.5 10.2 / 20.3 50 400 15.5 16.5 5 4.5 40 35 MKP1847H58035+P* 42.0 37.5 10.2 / 20.3 50 500 17 19 4 3.5 40 35 MKP1847H61035+P* 57.5 52.5 20.3 25 300 15.5 16 6 6 80 70 MKP1847H61235+Y* 57.5 52.5 20.3 25 375 17 18.5 5 4.5 80 70 MKP1847H61535+Y* 57.5 52.5 20.3 25 500 21 23 4 3.5 80 70 MKP1847H62035+Y* 57.5 52.5 20.3 25 550 22.5 24.5 3.5 3 80 70 MKP1847H62235+Y* UOPAC AT 85 °C = 480 VAC, UOPAC AT 105 °C = 330 VAC, C-TOL. = ± 10 % (UNDC = 1000 V) 42.0 37.5 10.2 80 160 9 10 9.5 9 20 15 MKP1847H52048+P* 42.0 37.5 10.2 / 20.3 80 240 13.5 14 6.5 6 20 15 MKP1847H53048+P* 57.5 52.5 20.3 80 320 12.5 13 9 8 40 35 MKP1847H54048+Y* 57.5 52.5 20.3 35 175 14.0 14.5 7.5 6.5 40 35 MKP1847H55048+Y* 57.5 52.5 20.3 35 210 16.5 17.5 6.5 6 40 35 MKP1847H56048+Y* 57.5 52.5 20.3 35 245 18.0 18.5 5.5 5 40 35 MKP1847H57048+Y* Notes (1) Rated voltage pulse slope (dU/dt) at voltage U R NDC (2) Maximum RMS current at 10 kHz, +85 °C, capacitance tolerance specified (3) Equivalent series resistance typical values at f = 10 kHz (4) Maximum tan δ values (5) Change the “*” symbol with special code for the terminals and “+” for tolerance Revision: 19-May-2021 Document Number: 26067 3 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1847H AC Filtering www.vishay.com Vishay Roederstein PACKAGING INFORMATION UNAC (V) UNDC (V) 250 500 310 630 350 700 480 1000 CAP. (1) (μF) 1 2 3 4 5 6 7 8 10 12 15 20 22 25 30 35 1 2 3 4 5 6 7 8 10 12 15 20 22 1 2 3 4 5 6 7 8 10 12 15 20 22 2 3 4 5 6 7 DIMENSION (mm) w 15.0 15.0 18.0 21.0 21.0 22.0 22.0 22.0 21.5 30.0 30.0 30.0 30.0 30.0 35.0 35.0 15.0 18.0 21.0 22.0 21.5 21.5 30.0 30.0 30.0 30.0 30.0 35.0 35.0 15.0 18.0 21.0 22.0 21.5 21.5 30.0 30.0 30.0 30.0 30.0 35.0 35.0 21.5 30.0 30.0 30.0 35.0 35.0 h 25.0 25.0 28.0 31.0 31.0 38.0 38.0 38.0 38.5 45.0 45.0 45.0 45.0 45.0 50.0 50.0 25.0 28.0 31.0 38.0 38.5 38.5 45.0 45.0 45.0 45.0 45.0 50.0 50.0 25.0 28.0 31.0 38.0 38.5 38.5 45.0 45.0 45.0 45.0 45.0 50.0 50.0 38.5 45.0 45.0 45.0 50.0 50.0 l 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 42.0 42.0 42.0 42.0 57.5 57.5 57.5 57.5 32.0 32.0 32.0 32.0 42.0 42.0 42.0 42.0 42.0 57.5 57.5 57.5 57.5 32.0 32.0 32.0 32.0 42.0 42.0 42.0 42.0 42.0 57.5 57.5 57.5 57.5 42.0 42.0 57.5 57.5 57.5 57.5 Ø dt (mm) ORDERING CODE (2) MASS (g) SPQ (3) (pcs) 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 0.8 0.8 0.8 0.8 1.0 1.0 1.0 1.0 1.0 1.2 1.2 1.2 1.2 1.0 1.0 1.2 1.2 1.2 1.2 MKP1847H51025+K2 MKP1847H52025+K2 MKP1847H53025+K2 MKP1847H54025+K2 MKP1847H55025+K2 MKP1847H56025+K2 MKP1847H57025+K2 MKP1847H58025+K2 MKP1847H61025+P* MKP1847H61225+P* MKP1847H61525+P* MKP1847H62025+P* MKP1847H62225+Y* MKP1847H62525+Y* MKP1847H63025+Y* MKP1847H63525+Y* MKP1847H51031+K2 MKP1847H52031+K2 MKP1847H53031+K2 MKP1847H54031+K2 MKP1847H55031+P* MKP1847H56031+P* MKP1847H57031+P* MKP1847H58031+P* MKP1847H61031+P* MKP1847H61231+Y* MKP1847H61531+Y* MKP1847H62031+Y* MKP1847H62231+Y* MKP1847H51035+K2 MKP1847H52035+K2 MKP1847H53035+K2 MKP1847H54035+K2 MKP1847H55035+P* MKP1847H56035+P* MKP1847H57035+P* MKP1847H58035+P* MKP1847H61035+P* MKP1847H61235+Y* MKP1847H61535+Y* MKP1847H62035+Y* MKP1847H62235+Y* MKP1847H52048+P* MKP1847H53048+P* MKP1847H54048+Y* MKP1847H55048+Y* MKP1847H56048+Y* MKP1847H57048+Y* 11 14 18 23 21 24 23 22 35 68 64 56 73 69 95 86 10 17 21 24 38 36 70 67 62 77 70 90 86 16 22 28 34 51 49 83 81 77 121 119 150 146 49 77 121 119 152 147 100 100 80 65 65 60 60 60 91 63 63 63 45 45 40 40 100 80 65 60 91 91 63 63 63 45 45 40 40 100 80 65 60 91 91 63 63 63 45 45 40 40 91 63 45 45 40 40 Notes (1) Intermediate capacitance values available on request (2) Change the “*” symbol with special code for the terminals and “+” for tolerance (3) SPQ = Standard Packing Quantity Revision: 19-May-2021 Document Number: 26067 4 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1847H AC Filtering www.vishay.com Vishay Roederstein APPROVALS SAFETY APPROVALS UL 810 construction VOLTAGE VALUE FILE NUMBERS LINKS Up to 480 VAC 1 μF to 35 μF Pending www.vishay.com/doc? CONSTRUCTION DESCRIPTION Low inductive wound cell elements of metallized polypropylene film, potted with resin in a flame retardant case. SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK The capacitor unit is designed for mounting on a printed circuit board. In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the printed circuit board. The capacitors shall be mechanically fixed by the leads and the body clamped. DIMENSIONS TOLERANCES For the maximum product dimensions for length (lmax.), width (wmax.) and height (hmax.) use the following tolerances: Imax. = I + ΔI, wmax. = w + Δw, and hmax. = h + Δh Pitch = 27.5 mm, Δw = Δl = Δh = 0.7 mm Pitch = 37.5 mm, Δw = Δl = Δh = 0.7 mm Pitch = 52.5 mm, Δw = Δl = Δh = 1.0 mm Imin. = I - ΔI, wmin. = w - Δw and hmin. = h - Δh Pitch = 27.5 mm, Δw = Δl = Δh = 1.0 mm Pitch = 37.5 mm, Δw = Δl = Δh = 1.0 mm Pitch = 52.5 mm, Δw = Δl = Δh = 1.5 mm SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD For product height with seating plane as given by “IEC 60717” as reference. For 2 pins: The maximum space for length (lmax.), width (wmax.), and height (hmax.) of film capacitors to take in account on the printed circuit board is shown in the drawings. • For products with pitch ≤ 27.5 mm, Δw = Δl = Δh = 0.7 mm • For products with pitch = 37.5 mm, Δw = Δl = Δh = 0.7 mm • For products with pitch = 52.5 mm, Δw = Δl = Δh = 1.0 mm Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. The maximum length and width of film capacitors is shown in the figure: wmax. = w + Δw Eccentricity Imax. = I + ΔI hmax. = h + Δh Seating plane Revision: 19-May-2021 Document Number: 26067 5 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1847H AC Filtering www.vishay.com Vishay Roederstein For 4 pins: DIMENSIONS in millimeters P1 ØD P2 Wmax. Lmax. P1 Lmax. Wmax. ØD H 37.5 I + 1.5 w + 1.8 1.5 h + 0.7 52.5 I + 1.8 w + 2.0 1.7 h + 1.0 SOLDERING CONDITIONS For general soldering conditions and wave soldering profile we refer to the document “Characteristics and Definitions Used for Film Capacitors”: www.vishay.com/doc?26033. STORAGE TEMPERATURE Tstg = -25 °C to +35 °C with relative humidity of maximum 75 % without condensation RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Revision: 19-May-2021 Document Number: 26067 6 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1847H AC Filtering www.vishay.com Vishay Roederstein CHARACTERISTICS Axis Title Axis Title 4 100 000 10000 10000 3 2 -1 -2 1st line 2nd line 1000 2nd line RC (s) 1000 0 1st line 2nd line 2nd line ∆C/C (%) 1 10 000 100 -3 100 -4 -5 -6 1000 10 -60 -40 -20 0 20 40 60 80 100 120 10 20 0 40 60 80 100 Tamb (°C) 2nd line Tamb (°C) 2nd line Capacitance as a function of ambient temperature (typical) Insulation resistance as a function of ambient temperature (typical) Axis Title Axis Title 1.2 100 10000 10000 Pitch = 27.5 mm 1.0 10 1000 0.4 1 1st line 2nd line 0.6 2nd line Z (Ω) 1000 1st line 2nd line 2nd line Factor 0.8 1 μF 4 μF 8 μF 0.1 100 100 0.01 0.2 0 0.001 10 000 10 -60 -40 -20 0 20 40 60 80 100 100 000 1 000 000 Tamb (°C) 2nd line f (Hz) 2nd line RMS voltage in function of temperature Impedance vs. Frequency (typical) Axis Title Axis Title 100 100 10000 10000 Pitch = 37.5 mm Pitch = 52.5 mm 10 10 0.01 1 0.1 100 0.01 100 000 1 000 000 10 10 000 000 1st line 2nd line 2nd line Z (Ω) 2 μF 5 μF 10 μF 20 μF 0.001 10 000 1000 1st line 2nd line 2nd line Z (Ω) 1000 1 0.1 10 10 000 000 100 5 μF 7 μF 12 μF 22 μF 35 μF 0.001 10 000 100 000 1 000 000 f (Hz) 2nd line f (Hz) 2nd line Impedance vs. Frequency (typical) Impedance vs. Frequency (typical) Revision: 19-May-2021 10 10 000 000 Document Number: 26067 7 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1847H AC Filtering www.vishay.com Vishay Roederstein Axis Title Axis Title 1000 10000 1000 100 10000 100 1 μF 20 μF 35 μF 10 1 μF 10 μF 22 μF 100 1 1st line 2nd line 10 2nd line VRMS (V) 1000 1st line 2nd line 100 1 0.1 10 100 1000 10 000 0.1 10 100 000 10 100 1000 10 000 f (Hz) 2nd line f (Hz) 2nd line Maximum RMS voltage as function of frequency Tamb ≤ 85 °C; Un = 250 VAC Maximum RMS voltage as function of frequency Tamb ≤ 85 °C; Un = 310 VAC Axis Title Axis Title 1000 1000 10000 100 10000 100 1 μF 10 μF 22 μF 10 2 μF 7 μF 100 1 1st line 2nd line 10 2nd line VRMS (V) 1000 1st line 2nd line 1000 2nd line VRMS (V) 10 100 000 100 1 0.1 10 100 1000 10 000 0.1 10 100 000 10 100 1000 10 000 10 100 000 f (Hz) 2nd line f (Hz) 2nd line Maximum RMS voltage as function of frequency Tamb ≤ 85 °C; Un = 350 VAC Maximum RMS voltage as function of frequency Tamb ≤ 85 °C; Un = 480 VAC Axis Title Axis Title 100 100 10000 10000 35 μF 20 μF 22 μF 10 μF 10 10 1 μF 1 100 0.1 10 100 1000 10 000 10 100 000 1000 2nd line IRMS (A) 1st line 2nd line 2nd line IRMS (A) 1000 1st line 2nd line 2nd line VRMS (V) 1000 1 μF 1 100 0.1 10 100 1000 10 000 10 100 000 f (Hz) 2nd line f (Hz) 2nd line Maximum RMS current as function of frequency Tamb ≤ 85 °C; Un = 250 VAC Maximum RMS current as function of frequency Tamb ≤ 85 °C; Un = 310 VAC Revision: 19-May-2021 Document Number: 26067 8 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1847H AC Filtering www.vishay.com Vishay Roederstein Axis Title Axis Title 100 10000 100 1000 10 10000 22 μF 10 μF 1 100 0.1 10 100 1000 10 000 10 100 000 1st line 2nd line 1 μF 1000 2 μF 2nd line IRMS (A) 2nd line IRMS (A) 1st line 2nd line 7 μF 10 1 100 0.1 10 100 1000 10 000 10 100 000 f (Hz) 2nd line f (Hz) 2nd line Maximum RMS current as function of frequency Tamb ≤ 85 °C; Un = 350 VAC Maximum RMS current as function of frequency Tamb ≤ 85 °C; Un = 480 VAC HEAT CONDUCTIVITY w 13.0 15.0 18.0 21.0 22.0 21.5 30.0 30.0 35.0 DIMENSION (mm) h 23.0 25.0 28.0 31.0 38.0 38.5 45.0 45.0 50.0 l 32.0 32.0 32.0 32.0 32.0 42.0 42.0 57.5 57.5 HEAT CONDUCTIVITY (mW/°C) 22 25 30 35 41 52 70 86 100 POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The component temperature rise (ΔT) can be measured or calculated by ΔT = P/G: • ΔT = component temperature rise (°C) with a maximum of 15 °C • P = power dissipation of the component (mW) • G = heat conductivity of the component (mW/°C) MEASURING THE COMPONENT TEMPERATURE Thermocouple The case temperature is measured in unloaded condition (Tamb) and loaded condition (TC). The temperature rise is given by ΔT = TC - Tamb. To avoid thermal radiation or convection, the capacitor must be tested in a closed area from air circulation. Revision: 19-May-2021 Document Number: 26067 9 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1847H AC Filtering www.vishay.com Vishay Roederstein APPLICATION NOTES AND LIMITING CONDITIONS These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (Up+) shall not be greater than 2 x U RMS 2. The peak-to-peak ripple voltage (Upp) shall not be greater than 2 x 2 x U RMS (for URMS consult graph “Maximum RMS Voltage as Function of Frequency) 3. The voltage pulse slope (dU/dt) shall not exceed the rated pulse slope at the DC voltage rating. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by UNDC and divided by the applied voltage. T dU 2 dU 2 x   ------- x dt < U NDC x  -------  dt   dt  rated 0 T is the pulse duration 4. The maximum component surface temperature must be lower than 105 °C and maximum temperature rise between case and free air ambient shall be lower than 15 °C. 5. For continuous operation, 24 hours per day for several years, please refer to application note: www.vishay.com/doc?28245 INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS ROUTINE TEST - FINAL INSPECTION 5.14.2-1 External inspection, visual examination Legible marking as specified 5.14.2-2 Dimensions See specification drawing 5.3-1 Capacitance 1 kHz at room temperature See specific reference data 5.3-2 tan δ 10 kHz at room temperature See specific reference data 5.5.1-2 Voltage test between terminals 1.5 x UNDC at Tamb Duration: 2 s No visible damage or puncture No flashover 5.7 Insulation resistance Measuring voltage 500 V at room temperature Duration: 1 min See specific reference data TYPE TESTS 5.14.2 External inspection Check for finish, marking, and overall dimensions Legible marking and finish as specified Dimensions: see specification drawing 5.14.0 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz 5.14.1-1/4 Robustness of terminations IEC 60068-2-21 Tensile Ua1 Wire diameter Section d ≤ 0.80 mm S ≤ 0.5 d ≤ 1.25 mm S ≤ 1.2 mm2 mm2 Load 10 N (± 10 %) 20 N (± 10 %) Duration: 10 s ± 1 s Bending, Ub method 1 Wire diameter Section modulus d ≤ 0.80 mm Zx ≤ 0.05 d ≤ 1.25 mm Zx ≤ 0.019 mm3 mm3 Load 5N (10 %) 10 N (± 10 %) 4 x 90°, duration: 2 s to 3 s/bend 5.14.1-6 Resistance to soldering heat IEC 60068-2-20 No pre-drying, method 1A Solder bath: 280 °C ± 5 °C Duration: 10 s ± 1 s 5.14.4 Final measurements Capacitance tan δ Revision: 19-May-2021 |ΔC/C| ≤ 0.5 % Increase of tan δ ≤ 0.0050 compared to the values measured in 5.14.0 Document Number: 26067 10 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1847H AC Filtering www.vishay.com Vishay Roederstein INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST 5.14.0 Initial measurements CONDITIONS Capacitance at 1 kHz tan δ at 10 kHz Insulation resistance 5.14.3-1 Vibration IEC 60068-2-6 10 Hz to 55 Hz; a = ± 0.35 mm or acceleration 98 m/s2 Test duration: 10 frequency cycles (3 axes offset from each other by 90°) 1 octave/min Visual examination PERFORMANCE REQUIREMENTS No visible damage 5.14.3-2 Shock or impact IEC 60068-2-6 Pulse shape: half sine Acceleration: 490 m/s2 Duration of pulse: 11 ms 5.14.4 Final measurements Visual examination No visible damage Capacitance tan δ |ΔC/C| ≤ 0.5 % Increase of tan δ ≤ 0.0050 compared to the values measured in 5.14.0 Insulation resistance ≥ 50 % of specified values Insulation resistance 5.5.3-1 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz Insulation resistance 5.5.3-2 DC voltage test between terminals 1.5 x UNDC at Tamb Duration: 10 s 5.5.3-3 Final measurements Capacitance tan δ Insulation resistance 5.9-1 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz Insulation resistance 5.9-2 Surge discharge test 1.1 x UNDC Number of discharges: 5 Time lapse: every 2 min (10 min total) 5.9-2 DC voltage test between terminals Within 5 min after the surge discharge test Duration: 10 s 1.5 x UNDC at Tamb 5.9-3 Final measurements Capacitance tan δ Insulation resistance |ΔC/C| ≤ 0.5 % Increase of tan δ ≤ 0.0050 Insulation resistance ≥ 50 % of specified values |ΔC/C| ≤ 1.0 % tan δ ≤ 1.2 x initial tan δ + 0.0001 compared to the values measured in 5.9-1 Insulation resistance ≥ 50 % of specified values 5.11-1 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz Insulation resistance 5.11-2 Self healing test 1.5 x UNDC, duration: 10 s Increase the voltage at 100 V/s till 5 clearings occur or until voltage reach max. of 2.5 x UNDC for a duration of 10 s Number of clearings ≤ 5 Clearing = voltage drop of 5 % 5.11-3 Final measurements Capacitance tan δ |ΔC/C| ≤ 0.5 % tan δ ≤ 1.2 x initial tan δ + 0.0001 compared to the values measured in 5.11-1 Insulation resistance ≥ 50 % of specified values Insulation resistance Revision: 19-May-2021 Document Number: 26067 11 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1847H AC Filtering www.vishay.com Vishay Roederstein INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS 5.13-0 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz Insulation resistance 5.13-1 Change of temperature according to IEC 60068-2-14 Test Nb Tmax. = +105 °C Tmin. = -40 °C Transition time: 1 h, equivalent to 1 °C/min. 5 cycles 5.13-2 Damp heat steady state according to IEC 60068-2-78 Test Ca T = 40 °C ± 2 °C RH = 93 % ± 3 % Duration: 56 days 5.5.3-2 DC voltage test between terminals 1.5 x UNDC at ambient temperature Duration: 10 s 5.13-3 Final measurements Visual examination No puncturing or flashover Self healing punctures are permitted Capacitance tan δ |ΔC/C| ≤ 2.0 % Increase of tan δ ≤ 0.0150 compared to the values measured in 5.13-0 Insulation resistance ≥ 50 % of specified values Insulation resistance 5.13A-0 Initial measurements Capacitance at 1 kHz tan δ at 1 kHz Insulation resistance 5.13A.2 Damp heat steady state with load T = 85 °C RH = 85 % at UN Duration: 1000 h 5.13.3 Final measurements Capacitance at 1 kHz tan δ Insulation resistance |ΔC/C| < 10 % Increase of tan δ: ≤ 0.008 for: C ≤ 10 μF or ≤ 0.005 for: C > 10 μF Compared to the values measured in 5.13A-0 Insulation resistance ≥ 50 % of specified values 5.10-0 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz Insulation resistance 5.10-1 Thermal stability test under overload conditions Natural cooling Tamb ± 5 °C 1.21 x Pmax. = 1.21 x (I2RMS/w x C) x tan δ(f) with w = 2 x π x f For IRMS see specific reference data f = 10 kHz Duration: 48 h 5.10-2 Final measurements Measure the temperature every 1.5 h during the last 6 h Temperature rise < 1 °C Capacitance tan δ at 10 kHz Insulation resistance |ΔC/C| ≤ 2.0 % Increase of tan δ ≤ 0.0150 Insulation resistance ≥ 50 % of specified values Revision: 19-May-2021 Document Number: 26067 12 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1847H AC Filtering www.vishay.com Vishay Roederstein INSPECTION REQUIREMENTS SUB-CLAUSE NUMBER AND TEST CONDITIONS 5.12 Resonance frequency measurement Impedance analyzer at Tamb 5.15-0 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz Insulation resistance 5.15-1 Endurance test between terminals Sequence: 1.25 x (URMS at 85 °C) at Tmax. = 85 °C 1.25 x (UOPAC at 105 °C) at Tmax. = 105 °C Duration: 500 h PERFORMANCE REQUIREMENTS > 0.9 times the value as specified in typical curve “Resonant frequency” of this specification 1000 x discharge at 1.4 x Î (maximum peak current) 1.25 x (URMS at 85 °C) at Tmax. = 85 °C 1.25 x (UOPAC at 105 °C) at Tmax. = 105 °C Duration: 500 h 5.15-2 Final measurement Capacitance tan δ Insulation resistance |ΔC/C| ≤ 3.0 % Increase of tan δ ≤ 0.0150 compared to the values measured in 5.15-0 Insulation resistance ≥ 50 % of specified values 5.16.3-0 Initial measurements Capacitance at 1 kHz 5.16.3-1 Destruction test sequence for segmented film The capacitors must be put in an oven at Tmax. = 105 °C/2 h and cooled down Product enveloped with cheese cloth High DC voltage test (limited to 200 mA) 3 x UNDC with minimum 2000 VDC, duration = 1 min Discharge the capacitor, duration = 1 min DC power supply capable of obtaining the desired breakdown voltage High AC voltage test ACRMS voltage = 1 x UN, duration = 15 s No burning of the cheese cloth The above sequence shall be repeated until the test sample capacitance loss 10 % of its initial measurement in 5.16.3B-0 5.16.3-2 Final measurements Visual examination Capacitance at 1 kHz The dielectric must withstand the test sequence conducted Note • Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 61071”. Revision: 19-May-2021 Document Number: 26067 13 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000