MKP1848570084K2

MKP1848 DC-Link www.vishay.com Vishay Roederstein Metallized Polypropylene DC-Link Film Capacitor Automotive Grade FEATURES • • • • • • • High performance DC filter Low ESR High peak current capabilities High RMS current capabilities AEC-Q200 qualified, revision D at Tmax. = 85 °C Mounting: radial Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • • • • • High performance DC filtering HEV / EV: i.e. power train and OBC Renewable energies inverters Motor drives Power supplies QUICK REFERENCE DATA Rated capacitance range Capacitance tolerance Rated voltage range, UNDC Climatic testing class Rated temperature Maximum permissible case temperature Maximum applicable peak to peak ripple voltage Reference standards Dielectric Electrodes Construction Encapsulation Terminals Self inductance (LS) Withstanding DC voltage between terminals (1) Insulation resistance Life time expectancy Marking 1 μF to 400 μF 5% 450 V to 1200 V 40 / 105 / 56 85 °C 105 °C, observing voltage derating 0.2 x UNDC IEC 61071, IEC 60068 Polypropylene film Metallized dielectric capacitor Mono construction Plastic case, sealed with resin; flame retardant Tinned wires < 1 nH per mm of lead spacing 1.5 UNDC for 10 s, cut off current 10 mA, rise time ≤ 1000 V/s RC between leads, after 1 min > 10 000 s For UNDC ≤ 500 V measuring voltage 100 V For UNDC > 500 V measuring voltage 500 V Useful life time: > 100 000 h at UNDC and 70 °C FIT: < 10 x 10-9/h (10 per 109 component h) at 0.5 x UNDC, 40 °C C-value; tolerance; rated voltage; code for dielectric material; code for manufacturing origin; manufacturer’s type designation; manufacturer’s logo; year and week of manufacture Notes • For more detailed data and test requirements, contact dc-film@vishay.com • For general information like characteristics and definitions used for film capacitors follow the link: www.vishay.com/doc?28147 (1) See document “Voltage Proof Test for Metalized Film Capacitors” (www.vishay.com/doc?28169) DC VOLTAGE RATINGS UNDC at 85 °C UOPDC at 70 °C UOPDC at 105 °C Revision: 08-Aug-2023 450 V 500 V 300 V 700 V 800 V 500 V 800 V 900 V 570 V 900 V 1100 V 650 V 1100 V 1350 V 800 V 1200 V 1500 V 850 V Document Number: 28164 1 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein COMPOSITION OF CATALOG NUMBER CAPACITANCE (numerically) MULTIPLIER (nF) 10 4 100 5 512 1200 nF 1.2 µF P1 (mm) PITCH CODE 1000 6 612 12 000 nF 12 µF 27.5 K 10 000 7 712 120 000 nF 120 µF 37.5 P 52.5 Y MKP 1848 Example: 6 12 09 4 P 4 TYPE CONSTRUCTION METALLIZED POLYPROPYLENE SPECIAL CODE FOR TERMINAL TOLERANCE 2 2 pins 4 4 4 pins P2 = 10.2 mm UN = 70 = 700 VDC 5 4 pins P2 = 20.3 mm UN = 08 = 800 VDC (1) Customized VOLTAGE UN = 45 = 450 VDC ±5% UN = 09 = 900 VDC UN = 91 = 1100 VDC UN = 92 = 1200 VDC Note (1) Tabs terminals or customized terminals are available on request DIMENSIONS in millimeters 2 PINS w I h P1 6-1 Ø dt P1 ± 0.4 - PCM 27.5 mm P1 ± 0.5 - PCM ≥ 37.5 mm 4 PINS w I Marking P2 P2 h P1 6-2 Ø dt P1 ± 0.5 Revision: 08-Aug-2023 P2 ± 0.5 Document Number: 28164 2 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein DIMENSIONS in millimeters 6 PINS (1) w I P2 Marking h P2 6-2 P1 P1 Ø dt P2 2 x P2 12 PINS (1) w I Marking P1 h 6-2 P2 P1 Ø dt 2 x P2 3 x P2 P2 2 x P2 4 x P2 3 x P2 5 x P2 4 x P2 5 x P2 Notes • Ø dt ± 10 % of standard diameter specified • For pitch 27.5 mm marking will be either on top or front side. For pitch ≥ 37.5 mm marking will be on front side only / 6 pins and 12 pins lateral side (1) 6 pins and 12 pins capacitors nominal capacitance is achieved by connecting the represented individual cells in parallel ELECTRICAL DATA AND ORDERING CODE UNDC AT CAP. (8) 85 °C (μF) (V) 450 1 2 3 4 5 6 7 8 9 10 12 15 10 DIMENSION (5) (mm) w h l 9.0 9.0 11.0 11.0 13.0 15.0 15.0 18.0 18.0 18.0 21.0 20.0 18.5 19.0 19.0 21.0 21.0 23.0 25.0 25.0 28.0 28.0 28.0 31.0 35.0 35.5 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 43.0 Revision: 08-Aug-2023 dV/dt IPEAK (V/μs) (A) IRMS (2) (A) ESR (3) (mΩ) P1 (mm) P2 (mm) 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 UOPDC AT 70 °C = 500 V, UOPDC AT 105 °C = 300 V 75 75 2.5 54 75 150 3 34.5 75 225 4 23.0 75 300 4 20.5 75 375 5 16.5 75 450 6 13.5 75 525 6.5 11.5 75 600 8.5 8.5 75 675 8.5 9.0 75 750 9 8.0 75 900 10 7.0 75 1125 11.5 6.0 10.2 40 400 7.5 8 13.5 12.0 tan δ 10 kHz (< 10-4) (4) ORDERING CODE (1) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS 85 85 85 85 85 85 85 85 85 85 85 85 160 140 MKP1848510454K2 MKP1848520454K2 MKP1848530454K2 MKP1848540454K2 MKP1848550454K2 MKP1848560454K2 MKP1848570454K2 MKP1848580454K2 MKP1848590454K2 MKP1848610454K2 MKP1848612454K2 MKP1848615454K2 MKP1848610454P* Document Number: 28164 3 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE UNDC AT CAP. (8) 85 °C (μF) (V) DIMENSION (5) (mm) P1 (mm) P2 (mm) dV/dt IPEAK (V/μs) (A) IRMS (2) (A) ESR (3) (mΩ) tan δ 10 kHz (< 10-4) (4) ORDERING CODE (1) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS w h l 12 18.5 35.5 43.0 37.5 10.2 40 480 15 18.5 35.5 43.0 37.5 10.2 40 600 9 10 9.0 8.0 160 140 MKP1848615454P* 20 21.5 38.5 42.0 37.5 10.2 40 800 11 12 7.0 6.0 160 140 MKP1848620454P* 22 21.5 38.5 42.0 37.5 10.2 40 880 11 11.5 7.5 6.5 160 140 MKP1848622454P* 25 21.5 38.5 42.0 37.5 10.2 40 1000 11.5 12.5 6.5 5.5 160 140 MKP1848625454P* 30 24.0 44.0 42.0 37.5 10.2 40 1200 13.5 15 5.5 4.5 160 140 MKP1848630454P* 35 30.0 45.0 42.0 37.5 10.2 / 20.3 40 1400 17 18.5 4.0 3.5 160 140 MKP1848635454P* 40 30.0 45.0 42.0 37.5 10.2 / 20.3 40 1600 17 18.5 4.0 3.5 160 140 MKP1848640454P* 40 25.0 45.0 57.5 52.5 10.2 20 800 13 13.5 6.5 6.0 310 280 MKP1848640454Y* 45 25.0 45.0 57.5 52.5 10.2 20 900 12.5 13.5 7.0 6.0 310 280 MKP1848645454Y* 50 30.0 45.0 57.5 52.5 20.3 20 1000 15 15.5 5.5 5.0 310 280 MKP1848650454Y* 55 30.0 45.0 57.5 52.5 20.3 20 1100 15 15.5 5.5 5.0 310 280 MKP1848655454Y* 60 30.0 45.0 57.5 52.5 20.3 20 1200 15.5 16.5 5.0 4.5 310 280 MKP1848660454Y* 65 35.0 50.0 57.5 52.5 20.3 20 1300 19 20.5 4.0 3.5 310 280 MKP1848665454Y* 70 35.0 50.0 57.5 52.5 20.3 20 1400 18 19 4.5 4.0 310 280 MKP1848670454Y* 75 35.0 50.0 57.5 52.5 20.3 20 1500 19 20.5 4.0 3.5 310 280 MKP1848675454Y* 80 35.0 50.0 57.5 52.5 20.3 20 1600 19 20.5 4.0 3.5 310 280 MKP1848680454Y* 90 45.0 45.0 57.5 52.5 20.3 20 1800 - 21.5 - 3.0 - 280 MKP1848690454Y5 95 45.0 45.0 57.5 52.5 20.3 20 1900 - 21.5 - 3.0 - 280 MKP1848695454Y5 100 45.0 45.0 57.5 52.5 20.3 20 2000 - 23.5 - 2.5 - 280 MKP1848710454Y5 200 65.5 65.0 57.5 52.5 20.3 20 2000 - 30.5 - 2.0 - 310 MKP1848720454Y5 (6) 400 130 65.0 57.5 52.5 20.3 10 4000 - 50.5 - 1.5 - 380 MKP1848740454Y5 (7) 1 9 19 32 27.5 - 75 75 2.5 - 54 - 68 - MKP1848510704K2 2 9 19 32 27.5 - 75 150 3 - 34.5 - 68 - MKP1848520704K2 3 11 21 32 27.5 - 75 225 4 - 23 - 68 - MKP1848530704K2 4 13 23 32 27.5 - 75 300 5 - 17 - 68 - MKP1848540704K2 5 15 25 32 27.5 - 75 375 6 - 14 - 68 - MKP1848550704K2 6 18 28 32 27.5 - 75 450 7.5 - 11.5 - 68 - MKP1848560704K2 7 18 28 32 27.5 - 75 525 8 - 10 - 68 - MKP1848570704K2 8 18 28 32 27.5 - 75 600 8.5 - 8.5 - 68 - MKP1848580704K2 9 21 31 32 27.5 - 75 675 10 - 7.5 - 68 - MKP1848590704K2 10 21 31 32 27.5 - 75 750 10 - 7 - 68 - MKP1848610704K2 UOPDC AT 70 °C = 500 V, UOPDC AT 105 °C = 300 V 450 8 8.5 11.5 10.0 160 140 MKP1848612454P* UOPDC AT 70 °C = 800 V, UOPDC AT 105 °C = 500 V 700 12 20 35 32 27.5 - 75 900 11.5 - 6 - 68 - MKP1848612704K2 10 18.5 35.5 43 37.5 10.2 40 400 7.5 8 13.5 12 135 120 MKP1848610704P* 12 18.5 35.5 43 37.5 10.2 40 480 8 8.5 11.5 10 135 120 MKP1848612704P* 15 18.5 35.5 43 37.5 10.2 40 600 9 10 9 8 135 120 MKP1848615704P* 20 21.5 38.5 42 37.5 10.2 40 800 11 12 7 6 135 120 MKP1848620704P* 22 24 44 42 37.5 10.2 40 880 13 13.5 6 5.5 135 120 MKP1848622704P* 25 24 44 42 37.5 10.2 40 1000 13.5 14.5 5.5 5 135 120 MKP1848625704P* 30 30 45 42 37.5 10.2 / 20.3 40 1200 16 17 4.5 4 135 120 MKP1848630704P* Revision: 08-Aug-2023 Document Number: 28164 4 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE UNDC AT CAP. (8) 85 °C (μF) (V) DIMENSION (5) (mm) w h P1 (mm) P2 (mm) dV/dt IPEAK (V/μs) (A) l IRMS (2) (A) ESR (3) (mΩ) tan δ 10 kHz (< 10-4) (4) ORDERING CODE (1) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS UOPDC AT 70 °C = 800 V, UOPDC AT 105 °C = 500 V 700 35 30 45 42 37.5 10.2 / 20.3 40 1400 17 18.5 4 3.5 135 120 MKP1848635704P* 30 25 45 57.5 52.5 10.2 20 600 11 12 9 8 270 240 MKP1848630704Y* 35 25 45 57.5 52.5 10.2 20 700 12 12.5 7.5 7 270 240 MKP1848635704Y* 40 25 45 57.5 52.5 10.2 20 800 13 13.5 6.5 6 270 240 MKP1848640704Y* 45 30 45 57.5 52.5 20.3 20 900 14.5 15 6 5.5 270 240 MKP1848645704Y* 50 30 45 57.5 52.5 20.3 20 1000 15 15.5 5.5 5 270 240 MKP1848650704Y* 55 35 50 57.5 52.5 20.3 20 1100 17 18 5 4.5 270 240 MKP1848655704Y* 60 35 50 57.5 52.5 20.3 20 1200 18 19 4.5 4 270 240 MKP1848660704Y* 65 35 50 57.5 52.5 20.3 20 1300 19 20.5 4 3.5 270 240 MKP1848665704Y* 70 45 45 57.5 52.5 20.3 20 1400 - 20 - 3.5 - 240 MKP1848670704Y5 75 45 45 57.5 52.5 20.3 20 1500 - 21.5 - 3 - 240 MKP1848675704Y5 80 45 45 57.5 52.5 20.3 20 1600 - 21.5 - 3 - 240 MKP1848680704Y5 160 65.5 65 57.5 52.5 20.3 20 3200 - 30.5 - 2.5 - 280 MKP1848716704Y5 (6) 320 130 65 57.5 52.5 20.3 20 6400 - 54 - 1.3 - 280 MKP1848732704Y5 (7) 1 9 19 32 27.5 - 75 75 2 - 62.5 - 60 - MKP1848510084K2 2 11 21 32 27.5 - 75 150 3.5 - 31 - 60 - MKP1848520084K2 3 13 23 32 27.5 - 75 225 4.5 - 21 - 60 - MKP1848530084K2 4 15 25 32 27.5 - 75 300 5.5 - 15.5 - 60 - MKP1848540084K2 5 18 28 32 27.5 - 75 375 7 - 12.5 - 60 - MKP1848550084K2 6 18 28 32 27.5 - 75 450 7.5 - 10.5 - 60 - MKP1848560084K2 7 21 31 32 27.5 - 75 525 9 - 9 - 60 - MKP1848570084K2 8 21 31 32 27.5 - 75 600 9.5 - 8 - 60 - MKP1848580084K2 UOPDC AT 70 °C = 900 V, UOPDC AT 105 °C = 570 V 800 9 20 35 32 27.5 - 75 675 10 - 8 - 60 - MKP1848590084K2 10 18.5 35.5 43 37.5 10.2 40 400 8 8.5 12.5 11 122 110 MKP1848610084P* 12 18.5 35.5 43 37.5 10.2 40 480 8.5 9 10.5 9 122 110 MKP1848612084P* 15 21.5 38.5 42 37.5 10.2 40 600 10 11 8.5 7.5 122 110 MKP1848615084P* 20 24 44 42 37.5 10.2 40 800 13 13.5 6 5.5 122 110 MKP1848620084P* 22 30 45 42 37.5 10.2 / 20.3 40 880 14.5 15.5 5.5 5 122 110 MKP1848622084P* 25 30 45 42 37.5 10.2 / 20.3 40 1000 15.5 16 5 4.5 122 110 MKP1848625084P* 30 25 45 57.5 52.5 10.2 10 300 12 12 8 7.5 240 215 MKP1848630084Y* 35 30 45 57.5 52.5 20.3 10 350 13 14.5 7 6 240 215 MKP1848635084Y* 40 30 45 57.5 52.5 20.3 10 400 14.5 15 6 5.5 240 215 MKP1848640084Y* 45 35 50 57.5 52.5 20.3 10 450 16 17 5.5 5 240 215 MKP1848645084Y* 50 35 50 57.5 52.5 20.3 10 500 17 18 5 4.5 240 215 MKP1848650084Y* 55 45 45 57.5 52.5 20.3 10 550 - 18.5 - 4 - 215 MKP1848655084Y5 60 45 45 57.5 52.5 20.3 10 600 - 20 - 3.5 - 215 MKP1848660084Y5 120 65.5 65 57.5 52.5 20.3 10 1600 - 27 - 3.2 - 215 MKP1848712084Y5 (6) 240 130 65 57.5 52.5 20.3 10 3200 - 48.5 - 1.6 - 215 MKP1848724084Y5 (7) Revision: 08-Aug-2023 Document Number: 28164 5 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE UNDC AT CAP. (8) 85 °C (μF) (V) DIMENSION (5) (mm) P1 (mm) P2 (mm) dV/dt IPEAK (V/μs) (A) IRMS (2) (A) ESR (3) (mΩ) tan δ 10 kHz (< 10-4) (4) ORDERING CODE (1) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS w h l 1 9 19 32 27.5 - 40 40 2 - 63 - 50 - MKP1848510094K2 2 13 23 32 27.5 - 80 160 3.5 - 32 - 50 - MKP1848520094K2 3 15 25 32 27.5 - 80 240 5 - 21 - 50 - MKP1848530094K2 4 18 28 32 27.5 - 80 320 6 - 16 - 50 - MKP1848540094K2 5 21 31 32 27.5 - 80 400 7.5 - 13 - 50 - MKP1848550094K2 6 21 31 32 27.5 - 80 480 8.5 - 10 - 50 - MKP1848560094K2 MKP1848570094K2 UOPDC AT 70 °C = 1100 V, UOPDC AT 105 °C = 650 V 900 7 20 35 32 27.5 - 80 560 9 - 9 - 50 - 5 18.5 35.5 43 37.5 10.2 20 100 6 6.5 21 19 100 90 MKP1848550094P* 6 18.5 35.5 43 37.5 10.2 40 240 6.5 7 18 16 100 90 MKP1848560094P* 7 18.5 35.5 43 37.5 10.2 40 280 6.5 7 18 16 100 90 MKP1848570094P* 8 18.5 35.5 43 37.5 10.2 40 320 7 7.5 16 14 100 90 MKP1848580094P* 9 18.5 35.5 43 37.5 10.2 40 360 7.5 8 14 12 100 90 MKP1848590094P* 10 21.5 38.5 42 37.5 10.2 40 400 8.5 9 12 11 100 90 MKP1848610094P* 12 21.5 38.5 42 37.5 10.2 40 480 9.5 10 10 9 100 90 MKP1848612094P* 15 24 44 42 37.5 10.2 40 600 11 12 8 7 100 90 MKP1848615094P* 16 24 44 42 37.5 10.2 40 640 11 12 8 7 100 90 MKP1848616094P* 20 30 45 42 37.5 10.2 / 20.3 40 800 14 15.5 6 5 100 90 MKP1848620094P* 15 25 45 57.5 52.5 10.2 20 300 9 9.5 14 12 200 185 MKP1848615094Y* 20 25 45 57.5 52.5 10.2 20 400 9.5 10 12 11 200 185 MKP1848620094Y* 22 25 45 57.5 52.5 10.2 20 440 10 10.5 11 10 200 185 MKP1848622094Y* 25 30 45 57.5 52.5 20.3 20 500 11 11.5 10 9 200 185 MKP1848625094Y* 30 30 45 57.5 52.5 20.3 20 600 12.5 13 8 7 200 185 MKP1848630094Y* 35 35 50 57.5 52.5 20.3 20 700 14.5 15.5 7 6 200 185 MKP1848635094Y* 40 35 50 57.5 52.5 20.3 20 800 15.5 17 6 5 200 185 MKP1848640094Y* 45 45 45 57.5 52.5 20.3 20 900 - 16.5 - 5 - 185 MKP1848645094Y5 50 45 45 57.5 52.5 20.3 20 1000 - 18.5 - 4 - 185 MKP1848650094Y5 100 65.5 65 57.5 52.5 20.3 20 2000 - 26.5 - 3.3 - 205 MKP1848710094Y5 (6) 200 130 65 57.5 52.5 20.3 20 4000 - 48.5 - 1.6 - 205 MKP1848720094Y5 (7) 1 11 21 32 27.5 - 45 - MKP1848510914K2 2 15 25 32 27.5 - 3 18 28 32 27.5 - 4 21 31 32 27.5 - 95 UOPDC AT 70 °C = 1350 V, UOPDC AT 105 °C = 800 V 1100 - 95 95 3 - 45.5 95 190 4.5 - 23 - 45 - MKP1848520914K2 95 285 6 - 15.5 - 45 - MKP1848530914K2 380 8 - 11.5 - 45 - MKP1848540914K2 5 20 35 32 27.5 - 95 475 9 - 9.5 - 45 - MKP1848550914K2 5 18.5 35.5 43 37.5 10.2 45 225 6.5 7 18 16 90 80 MKP1848550914P* 6 18.5 35.5 43 37.5 10.2 45 270 7 7.5 15 13.5 90 80 MKP1848560914P* 7 21.5 38.5 42 37.5 10.2 45 315 8 8.5 13 11.5 90 80 MKP1848570914P* 8 21.5 38.5 42 37.5 10.2 45 360 9 9.5 11 10 90 80 MKP1848580914P* 9 24 44 42 37.5 10.2 45 405 10 10.5 10 9 90 80 MKP1848590914P* 10 24 44 42 37.5 10.2 45 450 10.5 11 9 8 90 80 MKP1848610914P* 12 30 45 42 37.5 10.2 / 20.3 45 540 12.5 13.5 7.5 6.5 90 80 MKP1848612914P* Revision: 08-Aug-2023 Document Number: 28164 6 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein ELECTRICAL DATA AND ORDERING CODE UNDC AT CAP. (8) 85 °C (μF) (V) DIMENSION (5) (mm) P1 (mm) P2 (mm) dV/dt IPEAK (V/μs) (A) IRMS (2) (A) ESR (3) (mΩ) tan δ 10 kHz (< 10-4) (4) ORDERING CODE (1) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS w h l 10 25 45 57.5 52.5 10.2 23 230 8 12 25 45 57.5 52.5 10.2 23 276 15 25 45 57.5 52.5 10.2 23 345 20 30 45 57.5 52.5 20.3 23 22 35 50 57.5 52.5 20.3 25 35 50 57.5 52.5 20.3 30 45 45 57.5 52.5 20.3 60 65.5 65 57.5 52.5 20.3 70 65.5 65 57.5 52.5 120 130 65 57.5 52.5 140 130 65 57.5 52.5 UOPDC AT 70 °C = 1350 V, UOPDC AT 105 °C = 800 V 1100 8.5 18 16 175 155 MKP1848610914Y* 8.5 9 9.5 10.5 15 13 175 155 MKP1848612914Y* 12 10.5 175 155 460 11.5 12.5 MKP1848615914Y* 9 8 175 155 MKP1848620914Y* 23 506 13.5 14.5 23 575 14.5 15 8 7 175 155 MKP1848622914Y* 7 6.5 175 155 MKP1848625914Y* 23 690 - 16.5 - 5 - 155 MKP1848630914Y5 23 1380 - 40 - 2.5 - 180 MKP1848660914Y5 (6) 20.3 23 1610 - 34.5 - 2 - 180 MKP1848670914Y5 (6) 20.3 23 2760 - 39.5 - 2.4 - 180 MKP1848712914Y5 (7) 20.3 23 3220 - 43.5 - 2 - 180 MKP1848714914Y5 (7) UOPDC AT 70 °C = 1500 V, UOPDC AT 105 °C = 850 V 1200 1 11 21 32 27.5 - 100 100 3 - 43 - 40 - MKP1848510924K2 2 15 25 32 27.5 - 100 200 5 - 21.5 - 40 - MKP1848520924K2 3 18 28 32 27.5 - 100 300 6.5 - 14.5 - 40 - MKP1848530924K2 4 21 31 32 27.5 - 100 400 8 - 11 - 40 - MKP1848540924K2 5 18.5 35.5 43 37.5 10.2 48 240 6.5 7 17 15 80 70 MKP1848550924P* 6 18.5 35.5 43 37.5 10.2 48 288 7.5 8 14 12.5 80 70 MKP1848560924P* 7 21.5 38.5 42 37.5 10.2 48 336 8.5 9 12 11 80 70 MKP1848570924P* 8 21.5 38.5 42 37.5 10.2 48 384 9 9.5 10.5 9.5 80 70 MKP1848580924P* 9 24 44 42 37.5 10.2 48 432 10.5 11 9.5 8.5 80 70 MKP1848590924P* 10 24 44 42 37.5 10.2 48 480 11 11.5 8.5 7.5 80 70 MKP1848610924P* 12 30 45 42 37.5 10.2 / 20.3 48 576 13 13.5 7 6.5 80 70 MKP1848612924P* 10 25 45 57.5 52.5 10.2 24 240 8 8.5 17 15 165 150 MKP1848610924Y* 12 25 45 57.5 52.5 10.2 24 288 9 9.5 14 12.5 165 150 MKP1848612924Y* 15 25 45 57.5 52.5 10.2 24 360 10 10.5 11 10 165 150 MKP1848615924Y* 20 35 50 57.5 52.5 20.3 24 480 13 14 8.5 7.5 165 150 MKP1848620924Y* 22 35 50 57.5 52.5 20.3 24 528 14 14.5 7.5 7 165 150 MKP1848622924Y* 25 35 50 57.5 52.5 20.3 24 600 15 15.5 6.5 6 165 150 MKP1848625924Y* 30 45 45 57.5 52.5 20.3 24 720 - 16.5 - 5 - 150 MKP1848630924Y5 60 65.5 65 57.5 52.5 20.3 24 1440 - 23 - 4.5 - 170 MKP1848660924Y5 (6) 120 130 65 57.5 52.5 20.3 24 2280 - 40.5 - 2.3 - 170 MKP1848712924Y5 (7) Notes (1) Change the * symbol with special code for the terminals (2) Maximum RMS current at 10 kHz, +85 °C, Δt = +15 °C, capacitance tolerance ≤ ± 5 % (3) Equivalent series resistance typical values at f = 10 kHz to 100 kHz for P = 27.5 mm, at f = 10 kHz to 70 kHz for P = 37.5 mm, at f = 10 kHz to 50 kHz for P = 52.5 mm (4) Maximum tan δ values (5) Standard dimension (6) 6 pins (7) 12 pins (8) Intermediate capacitance values available on request Revision: 08-Aug-2023 Document Number: 28164 7 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein PACKAGING INFORMATION UNDC AT 85 °C (V) HEIGHT (mm) CAP. (5) (μF) 19 19 21 21 23 25 25 28 28 28 31 35 35.5 35.5 35.5 38.5 38.5 38.5 44 45 45 45 45 45 45 45 50 50 50 50 45 45 45 65 65 1 2 3 4 5 6 7 8 9 10 12 15 10 12 15 20 22 25 30 35 40 40 45 50 55 60 65 70 75 80 90 95 100 200 400 19 19 21 23 25 28 28 28 31 31 35 35.5 35.5 35.5 38.5 1 2 3 4 5 6 7 8 9 10 12 10 12 15 20 450 700 Revision: 08-Aug-2023 Ø dt ORDERING CODE (1) UOPDC AT 70 °C = 500 V, UOPDC AT 105 °C = 300 V 0.8 MKP1848510454K2 0.8 MKP1848520454K2 0.8 MKP1848530454K2 0.8 MKP1848540454K2 0.8 MKP1848550454K2 0.8 MKP1848560454K2 0.8 MKP1848570454K2 0.8 MKP1848580454K2 0.8 MKP1848590454K2 0.8 MKP1848610454K2 0.8 MKP1848612454K2 0.8 MKP1848615454K2 1.0 MKP1848610454P* 1.0 MKP1848612454P* 1.0 MKP1848615454P* 1.0 MKP1848620454P* 1.0 MKP1848622454P* 1.0 MKP1848625454P* 1.0 MKP1848630454P* 1.0 MKP1848635454P* 1.0 MKP1848640454P* 1.2 MKP1848640454Y* 1.2 MKP1848645454Y* 1.2 MKP1848650454Y* 1.2 MKP1848655454Y* 1.2 MKP1848660454Y* 1.2 MKP1848665454Y* 1.2 MKP1848670454Y* 1.2 MKP1848675454Y* 1.2 MKP1848680454Y* 1.2 MKP1848690454Y5 1.2 MKP1848695454Y5 1.2 MKP1848710454Y5 1.2 MKP1848720454Y5 (3) 1.2 MKP1848740454Y5 (4) UOPDC AT 70 °C = 800 V, UOPDC AT 105 °C = 500 V 0.8 MKP1848510704K2 0.8 MKP1848520704K2 0.8 MKP1848530704K2 0.8 MKP1848540704K2 0.8 MKP1848550704K2 0.8 MKP1848560704K2 0.8 MKP1848570704K2 0.8 MKP1848580704K2 0.8 MKP1848590704K2 0.8 MKP1848610704K2 0.8 MKP1848612704K2 1.0 MKP1848610704P* 1.0 MKP1848612704P* 1.0 MKP1848615704P* 1.0 MKP1848620704P* MASS (g) SPQ (2) (pcs) 6 5.5 8.5 8.5 10.5 12.5 11.5 15 16 15 21.5 20 34 32 30 36 38 36 48 57 60 66 70 88 96 91 100 112 108 102 127 124 120 266 490 160 160 130 130 115 100 100 80 80 80 65 70 105 105 105 91 91 91 77 63 63 55 55 45 45 45 40 40 40 40 30 30 30 20 10 6 5.5 8.5 10.5 12 17 16 15 22 21 20 34 32 30 36 160 160 130 115 100 80 80 80 65 65 70 105 105 105 91 Document Number: 28164 8 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein PACKAGING INFORMATION UNDC AT 85 °C (V) HEIGHT (mm) CAP. (5) (μF) 44 44 45 45 45 45 45 45 45 50 50 50 45 45 45 65 65 22 25 30 35 30 35 40 45 50 55 60 65 70 75 80 160 320 19 21 23 25 28 28 31 31 35 35.5 35.5 38.5 44 45 45 45 45 45 50 50 45 45 65 65 19 23 25 28 31 31 35 35.5 35.5 1 2 3 4 5 6 7 8 9 10 12 15 20 22 25 30 35 40 45 50 55 60 120 240 1 2 3 4 5 6 7 5 6 700 800 Revision: 08-Aug-2023 Ø dt ORDERING CODE (1) UOPDC AT 70 °C = 800 V, UOPDC AT 105 °C = 500 V 1.0 MKP1848622704P* 1.0 MKP1848625704P* 1.0 MKP1848630704P* 1.0 MKP1848635704P* 1.2 MKP1848630704Y* 1.2 MKP1848635704Y* 1.2 MKP1848640704Y* 1.2 MKP1848645704Y* 1.2 MKP1848650704Y* 1.2 MKP1848655704Y* 1.2 MKP1848660704Y* 1.2 MKP1848665704Y* 1.2 MKP1848670704Y5 1.2 MKP1848675704Y5 1.2 MKP1848680704Y5 1.2 MKP1848716704Y5 (3) 1.2 MKP1848732704Y5 (4) UOPDC AT 70 °C = 900 V, UOPDC AT 105 °C = 570 V 0.8 MKP1848510084K2 0.8 MKP1848520084K2 0.8 MKP1848530084K2 0.8 MKP1848540084K2 0.8 MKP1848550084K2 0.8 MKP1848560084K2 0.8 MKP1848570084K2 0.8 MKP1848580084K2 0.8 MKP1848590084K2 1.0 MKP1848610084P* 1.0 MKP1848612084P* 1.0 MKP1848615084P* 1.0 MKP1848620084P* 1.0 MKP1848622084P* 1.0 MKP1848625084P* 1.2 MKP1848630084Y* 1.2 MKP1848635084Y* 1.2 MKP1848640084Y* 1.2 MKP1848645084Y* 1.2 MKP1848650084Y* 1.2 MKP1848655084Y5 1.2 MKP1848660084Y5 1.2 MKP1848712084Y5 (3) 1.2 MKP1848724084Y5 (4) 0.8 MKP1848510094K2 0.8 MKP1848520094K2 0.8 MKP1848530094K2 0.8 MKP1848540094K2 0.8 MKP1848550094K2 0.8 MKP1848560094K2 0.8 MKP1848570094K2 1.0 MKP1848550094P* 1.0 MKP1848560094P* MASS (g) SPQ (2) (pcs) 49 47 62 55 76 71 66 95 88 112 107 100 128 123 119 264 359 77 77 63 63 55 55 55 45 45 40 40 40 30 30 30 20 10 6.5 9 11 12 17 16 23 21 21 32 30 37 47 65 61 69 97 91 112 104 131 125 276 393 6 11 12 16.5 22.5 21 21 32 30 160 130 115 100 80 80 65 65 70 105 105 91 77 63 63 55 45 45 40 40 30 30 20 10 160 115 100 80 65 65 70 105 105 Document Number: 28164 9 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein PACKAGING INFORMATION UNDC AT 85 °C (V) HEIGHT (mm) CAP. (5) (μF) 35.5 35.5 35.5 38.5 38.5 44 44 45 45 45 45 45 45 50 50 45 45 65 65 7 8 9 10 12 15 16 20 15 20 22 25 30 35 40 45 50 100 200 21 25 28 31 35 35.5 35.5 38.5 38.5 44 44 45 45 45 45 45 50 50 45 65 65 65 65 1 2 3 4 5 5 6 7 8 9 10 12 10 12 15 20 22 25 30 60 70 120 140 21 25 28 31 35.5 35.5 38.5 1 2 3 4 5 6 7 900 1100 1200 Revision: 08-Aug-2023 Ø dt ORDERING CODE (1) UOPDC AT 70 °C = 1100 V, UOPDC AT 105 °C = 650 V 1.0 MKP1848570094P* 1.0 MKP1848580094P* 1.0 MKP1848590094P* 1.0 MKP1848610094P* 1.0 MKP1848612094P* 1.0 MKP1848615094P* 1.0 MKP1848616094P* 1.0 MKP1848620094P* 1.2 MKP1848615094Y* 1.2 MKP1848620094Y* 1.2 MKP1848622094Y* 1.2 MKP1848625094Y* 1.2 MKP1848630094Y* 1.2 MKP1848635094Y* 1.2 MKP1848640094Y* 1.2 MKP1848645094Y5 1.2 MKP1848650094Y5 1.2 MKP1848710094Y5 (3) 1.2 MKP1848720094Y5 (4) UOPDC AT 70 °C = 1350 V, UOPDC AT 105 °C = 800 V 0.8 MKP1848510914K2 0.8 MKP1848520914K2 0.8 MKP1848530914K2 0.8 MKP1848540914K2 0.8 MKP1848550914K2 1.0 MKP1848550914P* 1.0 MKP1848560914P* 1.0 MKP1848570914P* 1.0 MKP1848580914P* 1.0 MKP1848590914P* 1.0 MKP1848610914P* 1.0 MKP1848612914P* 1.2 MKP1848610914Y* 1.2 MKP1848612914Y* 1.2 MKP1848615914Y* 1.2 MKP1848620914Y* 1.2 MKP1848622914Y* 1.2 MKP1848625914Y* 1.2 MKP1848630914Y5 1.2 MKP1848660914Y5 (3) 1.2 MKP1848670914Y5 (3) 1.2 MKP1848712914Y5 (4) 1.2 MKP1848714914Y5 (4) UOPDC AT 70 °C = 1500 V, UOPDC AT 105 °C = 850 V 0.8 MKP1848510924K2 0.8 MKP1848520924K2 0.8 MKP1848530924K2 0.8 MKP1848540924K2 1.0 MKP1848550924P* 1.0 MKP1848560924P* 1.0 MKP1848570924P* MASS (g) SPQ (2) (pcs) 33 31 30 39 36 47 45 57 70 73 70 98 89 109 99 124 117 259 608 105 105 105 91 91 77 77 63 55 55 55 45 45 40 40 30 30 20 10 9 12 16 21.5 21.5 33 30 39 37 50 48 63 81 77 70 91 115 108 126 256 257 606 608 130 100 80 65 70 105 105 91 91 77 77 63 55 55 55 45 40 40 30 20 20 10 10 9 11.5 15 20 31 29 37 130 100 80 65 105 105 91 Document Number: 28164 10 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein PACKAGING INFORMATION UNDC AT 85 °C (V) HEIGHT (mm) CAP. (5) (μF) 38.5 44 44 45 45 45 45 50 50 50 45 65 65 8 9 10 12 10 12 15 20 22 25 30 60 120 1200 Ø dt ORDERING CODE (1) UOPDC AT 70 °C = 1500 V, UOPDC AT 105 °C = 850 V 1.0 MKP1848580924P* 1.0 MKP1848590924P* 1.0 MKP1848610924P* 1.0 MKP1848612924P* 1.2 MKP1848610924Y* 1.2 MKP1848612924Y* 1.2 MKP1848615924Y* 1.2 MKP1848620924Y* 1.2 MKP1848622924Y* 1.2 MKP1848625924Y* 1.2 MKP1848630924Y5 1.2 MKP1848660924Y5 (3) 1.2 MKP1848712924Y5 (4) MASS (g) SPQ (2) (pcs) 35 48 45 60 79 74 67 115 109 100 119 264 612 91 77 77 63 55 55 55 40 40 40 30 20 10 Notes (1) Change the * symbol with special code for the terminals (2) SPQ = Standard Packing Quantity (3) 6 pins (4) 12 pins (5) Intermediate capacitance values available on request CONSTRUCTION DESCRIPTION Low inductive wound cell elements of metallized polypropylene film, potted with resin in a flame retardant case. SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK The capacitor unit is designed for mounting on a printed circuit board. In order to withstand vibration and shock tests, it must be insured that the stand-off pips are in good contact with the printed circuit board. The capacitors shall be mechanically fixed by the leads and the body clamped. SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD The maximum length and width of film capacitors is shown in the figure. For product height with seating plane as given by “IEC 60717” as reference. For 2 pins: wmax. = w + Δw Eccentricity Imax. = I + ΔI hmax. = h + Δh Seating plane For the maximum product dimensions and maximum space requirements for length (lmax.), width (wmax.), and height (hmax.) following tolerances must be taken in account in the envelopment of the components as shown in the drawings below: • For products with 15 mm < pitch ≤ 27.5 mm, Δw = Δl = 0.5 mm, and Δh = 0.1 mm • For products with pitch = 37.5 mm, Δw = Δl = 0.7 mm, and Δh = 0.5 mm • For products with pitch = 52.5 mm, Δw = Δl = 1.0 mm, and Δh = 0.5 mm Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. The maximum length and width of film capacitors is shown in the figure. Revision: 08-Aug-2023 Document Number: 28164 11 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein For the minimum product dimensions for length (lmin.), width (wmin.), and height (hmin.) following tolerances of the components are valid: lmin. = l - Δl, wmin. = w - Δw, and hmin. = h - Δh following • For products with 15 mm < pitch ≤ 22.5 mm, Δl = 1.0 mm, and Δw = Δh = 0.5 mm • For products with pitch = 27.5 mm, Δl = 1.5 mm, and Δw = Δh = 0.5 mm • For products with pitch = 37.5 mm, Δl = 1.5 mm, and Δw = Δh = 1.0 mm • For products with pitch = 52.5 mm, Δl = 1.5 mm, and Δw = Δh = 1.0 mm For 4 pins, 6 pins, and 12 pins: Wmax. P2 2 x P2 ± 0.5 mm 3 x P2 ± 0.5 mm 4 x P2 ± 0.5 mm Lmax. P1 5 x P2 ± 0.5 mm ØD P1 (mm) Lmax. (mm) Wmax. (mm) Ø D (mm) H (mm) 27.5 l + 1.6 w + 2.0 1.2 h + 0.2 37.5 l + 2.0 w + 3.0 1.5 h + 0.5 52.5 l + 2.4 w + 4.0 1.7 h + 0.5 SOLDERING CONDITIONS For general soldering conditions and wave soldering profile, we refer to the application note: “Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171 Storage Temperature Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation. Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Revision: 08-Aug-2023 Document Number: 28164 12 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein CHARACTERISTICS 105 4 3 2 0 RC (s) ΔC/C (%) 1 -1 104 -2 -3 -4 -5 -6 - 60 - 40 0 - 20 20 40 60 80 100 120 Tamb (°C) 103 0 20 40 Capacitance (typical curve) Insulation resistance (typical curve) 100 1.3 Pitch 27.5 mm 1.2 10 70 °C 1.1 1 µF 1.0 1 85 °C Z (Ω) UOPDC/UNDC (V) 80 100 Tamb (°C) 60 0.9 12 µF 0.1 0.8 105 °C 0.7 0.01 0.6 0.5 103 104 105 106 Lifetime expectancy (h) 0.001 104 105 106 107 f (Hz) Lifetime expectancy (typical curve) Impedance vs. frequency (typical curve) 10.0 10.0 Pitch 37.5 mm Pitch 52.5 mm 1.0 1.0 10 µF 0.1 Z (Ω) Z (Ω) 40 µF 40 µF 0.1 80 µF 0.01 0.01 0.001 104 105 106 107 f (Hz) Impedance vs. frequency (typical curve) Revision: 08-Aug-2023 0.001 104 105 106 f (Hz) 107 Impedance vs. frequency (typical curve) Document Number: 28164 13 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein 1.6 IRMS operational/IRMS max. 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 50 60 70 80 90 100 Maximum ambient temperature (°C) 110 Maximum IRMS current in function of the ambient temperature HEAT CONDUCTIVITY DIMENSIONS (mm) HEAT CONDUCTIVITY (mW/°C) w h l 9.0 19.0 32.0 24 11.0 21.0 32.0 28 13.0 23.0 32.0 32 15.0 25.0 32.0 36 18.0 28.0 32.0 44 21.0 31.0 32.0 51 21.0 35.0 32.0 56 18.5 35.5 43.0 54 21.5 38.5 42.0 61 24.0 44.0 42.0 70 30.0 45.0 42.0 81 25.0 45.0 57.5 77 30.0 45.0 57.5 85 35.0 50.0 57.5 100 45.0 45.0 57.5 94 65.5 65.0 57.5 152 130.0 65.0 57.5 243 POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The component temperature rise (ΔT) can be measured or calculated by ΔT = P/G: • ΔT = TC - Tamb = case temperature rise (°C) with a maximum of 15 °C at rated temperature. • P = IRMS2 x ESR = power dissipation of the component (mW) • G = heat conductivity of the component (mW/°C) Revision: 08-Aug-2023 Document Number: 28164 14 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein MEASURING THE COMPONENT TEMPERATURE Thermocouple The case temperature is measured in unloaded (Tamb) and maximum loaded condition (TC). To avoid thermal radiation or convection, the capacitor must be tested in a closed area from air circulation. APPLICATION NOTE AND LIMITING CONDITIONS These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: • The continuous peak voltage (UP+) shall not exceed the rated DC voltage rating (UNDC) • The peak-to-peak ripple voltage (UPP) shall not be greater than 0.2 x (UNDC) Voltage (V) Non reversing recurrent waveform Up+ UNDC Upt • For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact: dc-film@vishay.com • The voltage peak slope (dU/dt) shall not exceed the pulse slope at the DC voltage rating. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by UNDC and divided by the applied voltage. For all other pulses following equation must be fulfilled: T dU 2 dU 2 x   ------- x dt < U NDC x  -------  dt   dt  rated 0 T is the pulse duration Maximum Repetitive Peak Voltages The capacitor unit may be subjected to the following surge without any significant reduction of lifetime expectancy REPETITIVE SURGE VOLTAGE MAXIMUM DURATION PER DAY 1.1 x UNDC 30 % on load duration 1.15 x UNDC 30 min 1.2 x UNDC 5 min Revision: 08-Aug-2023 1.3 x UNDC 1 min 1.5 x UNDC 110 ms Document Number: 28164 15 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein INSPECTION REQUIREMENTS General Notes Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 61071”. SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS ROUTINE TEST-FINAL INSPECTION 5.14.2.1 External inspection, visual examination Legible marking as specified 5.14.2.2 Dimensions See specification drawing 5.3.1 Capacitance 1 kHz at room temperature See specific reference data 5.3.2 tan δ 1 kHz at room temperature 10 kHz at room temperature See specific reference data 5.5.1.2 Voltage test between terminal 1.5 x UNDC at Tamb Duration 10 s No visible damage or puncture No flashover 5.7 Insulation resistance UNDC ≤ 500 V measuring voltage 100 V at room temperature See specific reference data UNDC > 500 V measuring voltage 500 V at room temperature Duration 1 min TYPE TESTS 5.14.2 External inspection Check for finish, marking and overall dimensions 5.14.0 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz 5.14.1.1.4 Robustness of terminations IEC 60068-2-21 Tensile Ua1 Wire diameter section ≤ 0.8 mm ≤ 0.5 mm2 ≤ 1.25 mm ≤ 1.2 mm2 Duration 10 s ± 1 s Bending Ub method 1 Wire diameter section ≤ 0.8 mm ≤ 0.05 mm3 ≤ 1.25 mm ≤ 0.019 mm3 20 N 4 x 90 °, Duration 2 s to 3 s/bend 5.14.1.6 Resistance to soldering heat IEC 60068-2-20 No predrying, method 1A Solder bath: 260 °C Duration 10 s ± 1 s 5.14.4 Final measurements Capacitance tan δ 5.14.0 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz Revision: 08-Aug-2023 Legible marking and finish as specified Dimensions: see specific drawing load 10 N 20 N load 10 N |ΔC/C| ≤ 0.5 % Increase of tan δ ≤ 0.0050 Compared to values measured in 5.14.0 Document Number: 28164 16 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS TYPE TESTS 5.14.3.1 5.14.3.2 Vibration IEC 60068-2-6 Shock or impact IEC 60068-2-6 10 Hz to 55 Hz: amplitude ± 0.35 mm or acceleration 98 m/s2 Test duration: 10 frequency cycles, 3 axes offset from each other by 90° 1 octave/min Visual examination No visible damages Pulse shape: half sine Acceleration: 490 m/s2 Duration t of pulse: 11 ms Visual examination No visible damage 5.14.4 Final measurements Capacitance tan δ 5.5.3.1 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz R insulation 5.5.3.2 Voltage test between terminal 1.5 x UNDC at Tamb Duration 60 s 5.5.3.3 Final measurements Capacitance tan δ R insulation 5.9.1 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz 5.9.2 Surge discharge test 1.1 x UNDC Number of discharges: 5 Time lapse: every 2 min (10 min total) 5.9.3 Voltage test between terminal Within 5 min after the surge discharge test Duration 60 s 1.5 x UNDC at Tamb 5.9.3 Final measurements Capacitance tan δ at 10 kHz 5.11.1 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz 5.11.2 Self healing test 1.5 x UNDC Duration 10 s Number of clearings ≤ 5 Clearing = voltage drop of 5 % increase the voltage at 100 V/s till 5 clearings occur with a max. of 2.5 x UNDC for a duration of 10 s 5.11.3 Final measurements Capacitance tan δ Revision: 08-Aug-2023 |ΔC/C| ≤ 0.5 % Increase of tan δ ≤ 0.0050 Compared to values measured in 5.14.0 |ΔC/C| ≤ 0.5 % Increase of tan δ ≤ 1.2 initial tan δ + 0.0001 R insulation ≥ 50 % of specified values |ΔC/C| ≤ 1.0 % tan δ ≤ 1.2 initial tan δ + 0.0001 Compared to values measured in 5.9.1 |ΔC/C| ≤ 0.5 % tan δ ≤ 1.2 x initial tan δ + 0.0001 Compared to values measured in 5.11.1 Document Number: 28164 17 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com Vishay Roederstein SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS TYPE TESTS 5.13.0 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz 5.13.1 Change of temperature acc. to IEC 60068-2-14 Test Nb Tmax. = 85 °C Tmin. = -40 °C Transition time: 1 h, equivalent to 1 °C/min 5.13.2 Damp heat steady state acc. to IEC 60068-2-78 Test Ca Tmax. = 40 °C ± 2 °C RH = 93 % ± 3 % Duration 56 days 5.5.3.2 Voltage test between terminal 1.5 x UNDC at ambient temperature Duration 60 s 5.13.3 Final measurements Visual examination No puncturing or flashover Self healing punctures are permitted Capacitance tan δ at 1 URMS 10 kHz |ΔC/C| ≤ 2.0 % Increase of tan δ ≤ 0.0150 Compared to values measured in 5.13.0 5.10.0 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz 5.10.1 Thermal stability test under overload conditions Natural cooling Tamb ± 5 °C 1.21 x Pmax. = (U2/2) x W2 x C x tan δ = 1.21 x (I2max./W2 x c) x tan δ2 with W2 = 2 x p x f2 for Imax. (see specific reference data) f2 = 10 kHz Duration 48 h 5.10.2 Final measurements Measure the temperature every 1.5 h during the last 6 h Capacitance tan δ at 10 kHz Temperature rise < 1 °C |ΔC/C| ≤ 2 % Increase of tan δ ≤ 1.2 x initial δ + 0.0150 5.12 Impedance analyzer at Tamb > 0.9 times the value as specified in typical curve “Resonant frequency” of this specification Resonance frequency measurement 5.10.0 Initial measurements Capacitance at 1 kHz tan δ at 10 kHz 5.15.1 Endurance test between terminals Sequence 1.4 x UNDC at Tmax. = 85 °C 1.4 x UOPDC at 105 °C Duration 250 h 1000 x discharge at 1.4 x I (maximum repetitive peak current in continuous operation) 1.4 x UNDC at Tmax. = 85 °C 1.4 x UOPDC at 105 °C Duration 250 h 5.15.2 Final measurements Capacitance tan δ Revision: 08-Aug-2023 |ΔC/C| ≤ 3 % Increase of tan δ ≤ 0.0150 Compared to values measured in 5.15.0 Document Number: 28164 18 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP1848 DC-Link www.vishay.com SUB-CLAUSE NUMBER AND TEST Vishay Roederstein CONDITIONS PERFORMANCE REQUIREMENTS TYPE TESTS 5.16.3.0 Initial measurements Capacitance at 1 kHz at Tmax. = 85 °C 5.16.3.1 Destruction test sequence High DC voltage test Product enveloped with cheese cloth 3 x UNDC or DC voltage Until repetitive product healings occur Duration = 15 min High AC voltage test 5.16.3.2 Final measurements Revision: 08-Aug-2023 Audible healings or check healings with oscilloscope ACRMS voltage = UNDC/2 √2 with minimum of 250 VAC Duration = 5 min Repeat destruction sequence 3 x Visual examination No puncturing or flashover Self healing punctures are permitted Document Number: 28164 19 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000