MKP385E2392AKFP2B0

MKP385e www.vishay.com Vishay BCcomponents THB AC and Pulse Metallized Polypropylene Film Capacitors High Temperature AEC-Q200 Qualified FEATURES • AEC-Q200 qualified (rev. D) • THB 60 °C 93 % RH for 56 days at rated voltage • High temperature capabilities, up to 125 °C • Customization on request • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Hybrid and electrical vehicles applications • On-board and inductive charging systems • BMS (battery management) • High pulse and high frequency currents • Snubbering • Resonant converters QUICK REFERENCE DATA Rated capacitance range (E12 series) 0.001 μF to 15 μF Capacitance tolerance ± 5 % / ± 10 % Rated voltage range, URDC 400 VDC, 630 VDC, 850 VDC, 1000 VDC, 1250 VDC, 1600 VDC, 2000 VDC, 2500 VDC Permissible AC voltage 200 VAC, 220 VAC, 300 VAC, 350 VAC, 450 VAC, 550 VAC, 700 VAC, 800 VAC Climatic testing class 40 / 105 / 56 Rated temperature 85 °C Max. operation temperature 105 °C up to 125 °C observing voltage derating Reference standards IEC 60384-17, AEC-Q200 qualified (rev. D) up to 105 °C Dielectric Polypropylene film Electrodes Metallized Mono construction (for ≤ 630 VDC) Series construction (for > 630 VDC) Construction Encapsulation Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0 Leads Tinned wire Withstanding DC voltage between terminals (1) 1.6 URDC for 60 s (maximum rise time 1000 V/s; cut off current 10 mA) Test voltage between terminals and case 1.4 URAC + 2000 VDC for 60 s Insulation resistance RC between leads, after 1 min: for URDC < 500 V measuring voltage 100 V for URDC ≥ 500 V measuring voltage 500 V > 100 GΩ for C ≤ 0.33 μF > 30 000 s for C > 0.33 μF Marking C-value, tolerance, rated voltage, code for dielectric material, manufacturer location, manufacturer’s type, manufacturer’s logo, year and week Notes • For more detailed data and test requirements, contact dc-film@vishay.com (1) See document “Voltage Proof Test for Metalized Capacitors” www.vishay.com/doc?28169 Revision: 30-Jun-2023 Document Number: 28255 1 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents VOLTAGE RATINGS AND TEMPERATURE VOLTAGE RATINGS Tamb = 85 °C Rated DC voltage URDC 400 630 850 1000 1250 1600 2000 2500 Rated AC voltage URAC 200 220 300 350 450 550 700 (1) 800 Rated peak to peak voltage Vp-p (2 x URAC x √2) 560 620 850 1000 1250 1600 2000 (1) 2250 Peak voltage Vo-p (URDC x 1.6) 640 1008 1360 1600 2000 2560 3200 4000 Maximum temporary RMS over voltage (< 24 h) (1.25 x URAC) 250 275 375 438 563 688 875 1000 280 441 595 700 875 1120 1400 1750 VOLTAGE RATINGS 85 °C < Tamb ≤ 105 °C UOPDC (URDC x 0.7) UOPAC (URAC x 0.7) 140 154 210 245 315 385 490 (2) 560 Rated peak to peak voltage Vp-p (2 x UOPAC x √2) 396 436 594 693 891 1089 Peak voltage Vo-p (URDC x 1.1) 440 693 935 1100 1375 1760 2200 2750 Maximum temporary RMS over voltage (< 24 h) (0.875 x URAC) 175 193 263 306 394 481 613 (2) 700 1386 (2) 1584 VOLTAGE RATINGS 105 °C < Tamb ≤ 125 °C (for limited time < 500 h) UOPDC (URDC x 0.5) 200 315 425 500 625 800 1000 1250 UOPAC (URAC x 0.5) 100 110 150 175 225 275 350 (3) 400 (3) Rated peak to peak voltage Vp-p (2 x UOPAC x √2) 283 311 424 495 636 778 990 Peak voltage Vo-p (URDC x 0.8) 320 504 680 800 1000 1280 1600 Maximum temporary RMS over voltage (< 24 h) (0.625 x URAC) 125 138 188 219 281 344 438 (3) 1131 2000 500 Notes (1) (2) (3) Rated AC voltage is 600 VAC and rated peak to peak voltage is 1700 VAC for pitch 37.5 mm UOPAC (URAC x 0.7) = 420 VAC; peak to peak voltage Vp-p (2 x UOPAC x √2) = 1188 V; maximum temporary RMS over voltage (< 24 h) (0.875 x URAC) = 525 VAC (UOPAC (URAC x 0.5) = 300 VAC; Peak to peak voltage Vp-p (2 x UOPAC x √2) = 849 V; maximum temporary RMS over voltage (< 24 h) (0.625 x URAC) = 375 VAC Revision: 30-Jun-2023 Document Number: 28255 2 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents COMPOSITION OF CATALOG NUMBER Example for C-Code 2 10 1 nF 0.001 μF 3 10 10 nF 0.01 μF Voltage (VDC) 4 10 100 nF 0.1 μF 5 10 1000 nF 1.0 μF 6 10 10 000 nF 10.0 μF Multiplier (nF) P1 (mm) Pitch Code 40 = 400 15 F 63 = 630 22.5 I 85 = 850 27.5 K 10 = 1000 37.5 P 12 = 1250 52.5 Y 1A = 1600 0.01 1 2A = 2000 0.1 2 2B = 2500 Special Code for Terminal 1 3 2 2 pins 10 4 4 4 pins P2 = 10.2 mm 5 4 pins P2 = 20.3 mm (#) Customized Capacitance Code (numerically) 100 5 1000 6 1 2 34567 8 9 10 MKP385e 1 4 11 12 7 2 Type A 13 14 15 16 17 18 K F [1] 2 [2] 0 Tolerance Special J ±5% 0 = standard K ± 10 % Other = special A Special tolerance It (mm) Lead Length Code Pitch (mm) Packing Code Packing Style Remark 3.5 ± 0.3 P All B/T Bulk/loose (1) Excluding bent back 5±1 M All W Tape and reel (H: 18.5 mm; 500 mm) Pitch 15 mm to 22.5 mm 25 ± 2 I ≤ 27.5 0: space holder Notes • For detailed tape specifications refer to packaging information www.vishay.com/doc?28139 (1) Capacitors with short leads up to 5 mm and pitch > 15 mm will be in tray and asking code will be “T” DIMENSIONS in millimeters l l w I h F' lt (1) F Ø dt 10 H Ø dt 6 -2 Ø dt P1 ± 0.5 CBB511 w Marking h h' h P w P2 ± 0.5 15 Note | F-F' | < 0.3 mm F = 7.5 mm + 0.6 mm / - 0.1 mm Ø dt = 0.80 mm ± 10 % for P < 37.5 mm and Ø dt = 0.95 mm ± 10 % for P ≥ 37.5 mm (1) Revision: 30-Jun-2023 Document Number: 28255 3 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING CODE URDC (V) 400 CAP. (μF) 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.00 1.20 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 DIMENSION wxhxl (mm) P1 (mm) 7.0 x 13.5 x 17.5 15 8.5 x 15.0 x 17.5 10.0 x 16.5 x 17.5 10.5 x 17.5 x 18.0 11.0 x 18.5 x 18.0 7.0 x 16.5 x 26.0 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 22.5 12.0 x 22.0 x 26.0 12.5 x 22.5 x 26.5 9.0 x 19.0 x 31.0 11.0 x 21.0 x 31.0 13.0 x 23.0 x 31.0 27.5 15.0 x 25.0 x 31.0 18.0 x 28.0 x 31.0 21.0 x 31.0 x 31.0 15.7 x 28.5 x 41.5 18.0 x 32.5 x 41.5 21.5 x 38.5 x 42.0 24.0 x 44.0 x 42.0 30.0 x 45.0 x 42.0 37.5 P2 (mm) du/dt IPEAK (V/μs)R (A) IRMS (1) (A) ESR (2) (mΩ) tan δ (3) (10-4) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS URAC = 200 V, Up-p = 560 V, C-TOL. = ± 10 % 5.4 2.0 51 6.4 2.2 44 7.8 2.2 43 9.4 2.4 35 11.5 2.5 32 13.8 2.6 31 130 17.3 3.1 25 20.7 3.1 25 25.3 3.4 22 31.1 4.0 18 38.0 3.9 18 44.9 4.3 16 54.1 4.8 15 28.6 3.0 37 35.1 3.1 34 42.9 3.7 28 50.7 3.8 26 61.1 4.3 24 115 72.8 4.7 20 88.4 5.3 18 106.6 5.8 15 130.0 6.1 14 156.0 6.8 12 37.6 4.0 28 44.8 4.3 24 54.4 4.9 21 65.6 5.4 18 80.0 5.7 16 96.0 6.3 15 80 120.0 6.7 13 144.0 7.8 11 176.0 9.0 10 216.0 9.8 8 264.0 11.6 7 312.0 12.2 6 148.5 10.7 7 175.5 11.2 7 211.5 12.7 6 252.0 13.2 6 45 306.0 15.3 16.0 5 5 10.2 369.0 15.6 16.4 5 5 450.0 16.9 17.7 5 5 540.0 18.1 19.0 5 5 20.3 675.0 17.9 18.8 5 5 30 30 35 35 40 45 45 50 65 70 70 75 75 70 70 70 75 75 95 100 105 110 110 95 100 100 105 110 110 110 120 125 140 150 160 190 200 225 245 285 325 390 465 595 260 295 355 420 540 ORDERING CODE (4) MKP385e.... 34740KF[1]2[2]0 35640KF[1]2[2]0 36840KF[1]2[2]0 38240KF[1]2[2]0 41040KF[1]2[2]0 41240KF[1]2[2]0 41540KF[1]2[2]0 41840KF[1]2[2]0 42240KF[1]2[2]0 42740KF[1]2[2]0 43340KF[1]2[2]0 43940KF[1]2[2]0 44740KF[1]2[2]0 42240KI[1]2[2]0 42740KI[1]2[2]0 43340KI[1]2[2]0 43940KI[1]2[2]0 44740KI[1]2[2]0 45640KI[1]2[2]0 46840KI[1]2[2]0 48240KI[1]2[2]0 51040KI[1]2[2]0 51240KI[1]2[2]0 44740KK[1]2[2]0 45640KK[1]2[2]0 46840KK[1]2[2]0 48240KK[1]2[2]0 51040KK[1]2[2]0 51240KK[1]2[2]0 51540KK[1]2[2]0 51840KK[1]2[2]0 52240KK[1]2[2]0 52740KK[1]2[2]0 53340KK[1]2[2]0 53940KK[1]2[2]0 53340KP[1]2T0 53940KP[1]2T0 54740KP[1]2T0 55640KP[1]2T0 56840KP[1]4T0 58240KP[1]4T0 61040KP[1]4T0 61240KP[1]5T0 61540KP[1]5T0 Notes IRMS at 85 °C ambient temperature and 100 kHz (2) ESR at 85 °C and 100 kHz (3) Maximum tan δ value at 100 kHz (4) Please replace “[1]” by the lead length code and the “[2]” by the packaging type in accordance with section “Composition of Catalog Number” (1) Revision: 30-Jun-2023 Document Number: 28255 4 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING CODE URDC (V) CAP. (μF) DIMENSION wxhxl (mm) P1 (mm) P2 (mm) du/dt IPEAK (V/μs)R (A) IRMS (1) (A) ESR (2) (mΩ) tan δ (3) (10-4) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS ORDERING CODE (4) MKP385e.... URAC = 220 V, Up-p = 620 V, C-TOL. = ± 10 % 0.027 3.5 1.4 - 106 - 30 - 32763KF[1]2[2]0 0.033 4.3 1.5 - 87 - 30 - 33363KF[1]2[2]0 0.039 5.1 1.7 - 74 - 30 - 33963KF[1]2[2]0 6.1 1.8 - 62 - 30 - 34763KF[1]2[2]0 0.056 7.3 1.8 - 62 - 35 - 35663KF[1]2[2]0 0.068 8.8 2.0 - 51 - 35 - 36863KF[1]2[2]0 10.7 2.4 - 43 - 40 - 38263KF[1]2[2]0 13.0 2.6 - 35 - 40 - 41063KF[1]2[2]0 0.12 15.6 2.9 - 30 - 45 - 41263KF[1]2[2]0 0.15 19.5 3.4 - 24 - 45 - 41563KF[1]2[2]0 0.047 7.0 x 13.5 x 17.5 15 0.082 0.10 0.18 - 150 8.5 x 15.0 x 17.5 10.0 x 16.5 x 17.5 23.4 3.7 - 20 - 50 - 41863KF[1]2[2]0 0.22 10.5 x 17.5 x 18.0 28.6 4.3 - 17 - 60 - 42263KF[1]2[2]0 0.27 11.0 x 18.5 x 18.0 35.1 4.9 - 14 - 65 - 42763KF[1]2[2]0 18.0 2.6 - 48 - 40 - 41263KI[1]2[2]0 22.5 2.9 - 39 - 45 - 41563KI[1]2[2]0 0.12 0.15 0.18 0.22 0.27 0.33 7.0 x 16.5 x 26.0 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 22.5 - 130 0.39 630 27.0 3.4 - 32 - 45 - 41863KI[1]2[2]0 33.0 3.8 - 27 - 65 - 42263KI[1]2[2]0 40.5 4.5 - 22 - 70 - 42763KI[1]2[2]0 49.5 4.9 - 18 - 70 - 43363KI[1]2[2]0 58.5 5.8 - 15 - 75 - 43963KI[1]2[2]0 70.5 6.3 - 13 - 75 - 44763KI[1]2[2]0 0.56 84.0 6.9 - 11 - 80 - 45663KI[1]2[2]0 0.27 24.3 3.6 - 34 - 70 - 42763KK[1]2[2]0 0.47 0.33 12.0 x 22.0 x 26.0 9.0 x 19.0 x 31.0 0.39 0.47 3.9 - 28 - 70 - 43363KK[1]2[2]0 4.6 - 24 - 75 - 43963KK[1]2[2]0 44763KK[1]2[2]0 42.3 5.1 - 20 - 75 - 0.56 50.4 5.5 - 17 - 80 - 45663KK[1]2[2]0 0.68 61.2 6.5 - 14 - 85 - 46863KK[1]2[2]0 73.8 7.1 - 12 - 90 - 48263KK[1]2[2]0 90.0 8.3 - 10 - 95 - 51063KK[1]2[2]0 108.0 9.9 - 8 - 100 - 51263KK[1]2[2]0 135.0 10.9 - 7 - 105 - 51563KK[1]2[2]0 162.0 12.8 - 6 - 110 - 51863KK[1]2[2]0 198.0 14.0 - 5 - 120 - 52263KK[1]2[2]0 135.0 11.7 - 7 - 150 - 52763KP[1]2T0 165.0 12.1 12.7 7 7 190 175 53363KP[1]4T0 195.0 12.9 13.6 7 7 225 205 53963KP[1]4T0 235.0 13.0 13.7 7 7 270 245 54763KP[1]4T0 280.0 14.3 15.0 7 7 305 275 55663KP[1]4T0 340.0 16.0 16.7 6 6 340 310 56863KP[1]5T0 410.0 17.0 17.8 6 6 365 330 58263KP[1]5T0 375.0 17.6 18.4 7 7 840 760 61563KY[1]5T0 0.82 1.0 1.2 1.5 1.8 2.2 11.0 x 21.0 x 31.0 29.7 35.1 13.0 x 23.0 x 31.0 21.0 x 31.0 x 31.0 3.3 18.5 x 35.5 x 43 5.6 6.8 8.2 15 90 18.0 x 28.0 x 31.0 18 x 32.5 x 41.5 4.7 - 15.0 x 25.0 x 31.0 2.7 3.9 27.5 21.5 x 38.5 x 42 - 37.5 10.2 50 24 x 44 x 42 30 x 45 x 42 35 x 50 x 57.5 20.3 52.5 25 Notes (1) I RMS at 85 °C ambient temperature and 100 kHz (2) ESR at 85 °C and 100 kHz (3) Maximum tan δ value at 100 kHz (4) Please replace “[1]” by the lead length code and the “[2]” by the packaging type in accordance with section “Composition of Catalog Number” Revision: 30-Jun-2023 Document Number: 28255 5 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING CODE URDC (V) 850 CAP. (μF) 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.5 1.7 1.8 2.2 2.7 3.3 3.9 4.7 DIMENSION wxhxl (mm) P1 (mm) 7.0 x 13.5 x 17.5 15 8.5 x 15.0 x 17.5 10.0 x 16.5 x 17.5 10.5 x 17.5 x 18.0 7.0 x 16.5 x 26.0 8.5 x 18.0 x 26.0 22.5 10.0 x 19.5 x 26.0 12.0 x 22.0 x 26.0 9.0 x 19.0 x 31.0 11.0 x 21.0 x 31.0 27.5 13.0 x 23.0 x 31.0 15.0 x 25.0 x 31.0 18.0 x 28.0 x 31.0 21.0 x 31.0 x 31.0 15.7 x 28.5 x 41.5 18 x 32.5 x 41.5 18.5 x 35.5 x 43 21.5 x 38.5 x 42 24 x 44 x 42 37.5 P2 (mm) du/dt IPEAK (V/μs)R (A) IRMS (1) (A) ESR (2) (mΩ) tan δ (3) (10-4) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS URAC = 300 V, Up-p = 850 V, C-TOL. = ± 10 % 5.9 1.2 154 25 7.1 1.2 147 25 8.9 1.3 118 25 10.6 1.4 107 25 13.0 1.5 88 25 15.9 1.6 79 30 19.5 1.7 74 30 590 23.0 1.8 63 30 27.7 2.0 59 35 33.0 2.2 50 35 40.1 2.4 41 35 48.4 2.9 34 40 59.0 3.2 28 40 70.8 3.6 24 40 17.5 1.8 103 30 20.7 1.8 98 30 24.9 2.0 82 30 29.7 2.2 79 35 36.0 2.4 65 35 43.5 2.4 63 40 530 53.0 2.4 64 45 63.6 2.7 53 45 79.5 3.2 43 50 95.4 3.5 36 55 116.6 4.2 30 60 143.1 4.6 24 65 174.9 5.1 20 70 33.0 2.6 67 40 39.6 3.0 55 40 49.5 3.4 44 45 59.4 3.5 43 50 72.6 3.5 41 60 89.1 3.9 34 65 108.9 3.8 36 75 330 128.7 4.4 31 75 155.1 4.8 26 75 184.8 5.6 22 85 224.4 6.1 19 95 270.6 7.3 15 100 330.0 8.6 13 105 396.0 9.4 11 110 225.0 11.4 6 75 255.0 12.5 6 85 270.0 12.6 6 90 330.0 13.5 14.2 6 6 105 95 150 405.0 14.8 15.5 6 6 120 110 10.2 495.0 16.1 17.0 5 5 140 130 585.0 16.5 17.3 5 5 160 145 20.3 705.0 18.1 19.0 5 5 185 170 ORDERING CODE (4) MKP385e.... 31085KF[1]2[2]0 31285KF[1]2[2]0 31585KF[1]2[2]0 31885KF[1]2[2]0 32285KF[1]2[2]0 32785KF[1]2[2]0 33385KF[1]2[2]0 33985KF[1]2[2]0 34785KF[1]2[2]0 35685KF[1]2[2]0 36885KF[1]2[2]0 38285KF[1]2[2]0 41085KF[1]2[2]0 41285KF[1]2[2]0 33385KI[1]2[2]0 33985KI[1]2[2]0 34785KI[1]2[2]0 35685KI[1]2[2]0 36885KI[1]2[2]0 38285KI[1]2[2]0 41085KI[1]2[2]0 41285KI[1]2[2]0 41585KI[1]2[2]0 41885KI[1]2[2]0 42285KI[1]2[2]0 42785KI[1]2[2]0 43385KI[1]2[2]0 41085KK[1]2[2]0 41285KK[1]2[2]0 41585KK[1]2[2]0 41885KK[1]2[2]0 42285KK[1]2[2]0 42785KK[1]2[2]0 43385KK[1]2[2]0 43985KK[1]2[2]0 44785KK[1]2[2]0 45685KK[1]2[2]0 46885KK[1]2[2]0 48285KK[1]2[2]0 51085KK[1]2[2]0 51285KK[1]2[2]0 51585KP[1]2T0 51785KP[1]2T0 51885KP[1]2T0 52285KP[1]4T0 52785KP[1]4T0 53385KP[1]4T0 53985KP[1]4T0 54785KP[1]5T0 30 x 45 x 42 Notes (1) I RMS at 85 °C ambient temperature and 100 kHz (2) ESR at 85 °C and 100 kHz (3) Maximum tan δ value at 100 kHz (4) Please replace “[1]” by the lead length code and the “[2]” by the packaging type in accordance with section “Composition of Catalog Number” Revision: 30-Jun-2023 Document Number: 28255 6 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING CODE URDC (V) CAP. (μF) DIMENSION wxhxl (mm) P1 (mm) P2 (mm) du/dt IPEAK (V/μs)R (A) IRMS (1) (A) ESR (2) (mΩ) tan δ (3) (10-4) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS ORDERING CODE (4) MKP385e.... URAC = 350 V, Up-p = 1000 V, C-TOL. = ± 10 % 0.018 0.022 7.0 x 13.5 x 17.5 0.027 0.033 0.039 8.5 x 15.0 x 17.5 15 - 590 1.8 - 66 - 20 - 31810KF[1]2[2]0 13.0 1.9 - 59 - 20 - 32210KF[1]2[2]0 15.9 1.9 - 54 - 25 - 32710KF[1]2[2]0 19.5 2.3 - 47 - 25 - 33310KF[1]2[2]0 23.0 2.3 - 45 - 30 - 33910KF[1]2[2]0 0.047 27.7 2.3 - 44 - 30 - 34710KF[1]2[2]0 0.056 33.0 2.8 - 37 - 35 - 35610KF[1]2[2]0 40.1 2.8 - 35 - 40 - 36810KF[1]2[2]0 0.068 10.0 x 16.5 x 17.5 0.082 10.5 x 17.5 x 18.0 48.4 3.3 - 29 - 45 - 38210KF[1]2[2]0 0.056 7.0 x 16.5 x 26.0 29.7 2.1 - 72 - 30 - 35610KI[1]2[2]0 0.068 0.082 0.10 0.12 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 22.5 - 530 0.15 36.0 2.4 - 64 - 35 - 36810KI[1]2[2]0 43.5 2.7 - 53 - 40 - 38210KI[1]2[2]0 53.0 3.1 - 44 - 40 - 41010KI[1]2[2]0 63.6 3.4 - 37 - 45 - 41210KI[1]2[2]0 79.5 4.2 - 30 - 45 - 41510KI[1]2[2]0 95.4 4.3 - 27 - 50 - 41810KI[1]2[2]0 0.22 116.6 4.6 - 24 - 65 - 42210KI[1]2[2]0 0.10 33.0 2.7 - 60 - 45 - 41010KK[1]2[2]0 0.18 1000 10.6 0.12 12.0 x 22.0 x 26.0 9.0 x 19.0 x 31.0 0.15 0.18 11.0 x 21.0 x 31.0 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 13.0 x 23.0 x 31.0 21.0 x 31.0 x 31.0 15.7 x 28.5 x 41.5 18 x 32.5 x 41.5 1.5 18.5 x 35.5 x 43 1.8 21.5 x 38.5 x 42 3.3 330 18.0 x 28.0 x 31.0 1.2 2.7 - 15.0 x 25.0 x 31.0 1.0 2.2 27.5 - 37.5 10.2 24 x 44 x 42 30 x 45 x 42 20.3 180 39.6 2.8 - 58 - 45 - 41210KK[1]2[2]0 49.5 3.3 - 47 - 50 - 41510KK[1]2[2]0 59.4 3.6 - 39 - 50 - 41810KK[1]2[2]0 72.6 3.8 - 35 - 70 - 42210KK[1]2[2]0 89.1 4.5 - 29 - 70 - 42710KK[1]2[2]0 108.9 4.8 - 26 - 75 - 43310KK[1]2[2]0 128.7 5.5 - 22 - 75 - 43910KK[1]2[2]0 155.1 5.7 - 21 - 80 - 44710KK[1]2[2]0 184.8 6.6 - 19 - 95 - 45610KK[1]2[2]0 224.4 7.8 - 16 - 100 - 46810KK[1]2[2]0 270.6 8.3 - 14 - 105 - 48210KK[1]2[2]0 180.0 10.5 - 7 - 60 - 51010KP[1]2T0 216.0 11.9 - 7 - 65 - 51210KP[1]2T0 270.0 13.3 14.0 6 6 75 70 51510KP[1]4T0 324.0 14.7 15.5 6 6 80 75 51810KP[1]4T0 396.0 16.4 17.3 5 5 90 85 52210KP[1]4T0 486.0 17.0 17.8 5 5 105 95 52710KP[1]4T0 594.0 18.7 19.6 5 5 120 110 53310KP[1]5T0 Notes (1) I RMS at 85 °C ambient temperature and 100 kHz (2) ESR at 85 °C and 100 kHz (3) Maximum tan δ value at 100 kHz (4) Please replace “[1]” by the lead length code and the “[2]” by the packaging type in accordance with section “Composition of Catalog Number” Revision: 30-Jun-2023 Document Number: 28255 7 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING CODE URDC (V) CAP. (μF) DIMENSION wxhxl (mm) P1 (mm) P2 (mm) du/dt IPEAK (V/μs)R (A) IRMS (1) (A) ESR (2) (mΩ) tan δ (3) (10-4) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS ORDERING CODE (4) MKP385e.... URAC = 450 V, Up-p = 1250 V, C-TOL. = ± 10 % 0.0082 5.5 1.7 - 71 - 20 - 28212KF[1]2[2]0 0.010 6.7 1.8 - 64 - 20 - 31012KF[1]2[2]0 8.0 1.9 - 60 - 20 - 31212KF[1]2[2]0 10.1 2.0 - 51 - 25 - 31512KF[1]2[2]0 0.012 7.0 x 13.5 x 17.5 0.015 0.018 12.1 2.2 - 43 - 25 - 31812KF[1]2[2]0 0.022 14.7 2.6 - 35 - 25 - 32212KF[1]2[2]0 18.1 2.9 - 29 - 25 - 32712KF[1]2[2]0 0.027 8.5 x 15.0 x 17.5 15 - 670 0.033 22.1 3.2 - 24 - 30 - 33312KF[1]2[2]0 0.039 26.1 3.7 - 20 - 30 - 33912KF[1]2[2]0 31.5 4.1 - 17 - 30 - 34712KF[1]2[2]0 0.047 10.0 x 16.5 x 17.5 0.056 10.5 x 17.5 x 18.0 37.5 4.7 - 14 - 35 - 35612KF[1]2[2]0 0.068 11.0 x 18.5 x 18.0 45.6 5.3 - 12 - 35 - 36812KF[1]2[2]0 0.047 0.056 8.5 x 18.0 x 26.0 0.068 0.082 0.10 0.12 1250 0.15 10.0 x 19.5 x 26.0 12.5 x 22.5 x 26.5 0.10 9.0 x 19.0 x 31.0 0.15 0.18 0.22 0.27 0.33 0.39 0.47 - 600 12.0 x 22.0 x 26.0 0.18 0.12 22.5 11.0 x 21.0 x 31.0 13.0 x 23.0 x 31.0 27.5 - 370 15.0 x 25.0 x 31.0 18.0 x 28.0 x 31.0 28.2 3.2 - 37 - 30 - 34712KI[1]2[2]0 33.6 3.5 - 32 - 30 - 35612KI[1]2[2]0 40.8 3.8 - 26 - 35 - 36812KI[1]2[2]0 49.2 4.5 - 22 - 40 - 38212KI[1]2[2]0 60.0 4.9 - 18 - 40 - 41012KI[1]2[2]0 72.0 5.9 - 15 - 45 - 41212KI[1]2[2]0 90.0 6.5 - 12 - 45 - 41512KI[1]2[2]0 108.0 7.3 - 10 - 45 - 41812KI[1]2[2]0 37.0 4.7 - 20 - 45 - 41012KK[1]2[2]0 44.4 5.6 - 17 - 45 - 41212KK[1]2[2]0 55.5 6.2 - 13 - 45 - 41512KK[1]2[2]0 66.6 7.3 - 11 - 50 - 41812KK[1]2[2]0 81.4 8.0 - 9 - 65 - 42212KK[1]2[2]0 99.9 9.4 - 8 - 65 - 42712KK[1]2[2]0 122.1 10.2 - 6 - 70 - 43312KK[1]2[2]0 144.3 12.1 - 6 - 70 - 43912KK[1]2[2]0 173.9 13.1 - 5 - 75 - 44712KK[1]2[2]0 0.56 21.0 x 31.0 x 31.0 207.2 15.3 - 4 - 80 - 45612KK[1]2[2]0 0.68 15.7 x 28.5 x 41.5 136.0 15.8 - 3 - 20 - 46812KP[1]2T0 164.0 14.4 - 5 - 30 - 48212KP[1]2T0 200.0 13.2 - 6 - 45 - 51012KP[1]2T0 240.0 13.3 13.9 6 6 60 55 51212KP[1]4T0 300.0 14.1 14.8 6 6 75 70 51512KP[1]4T0 360.0 15.7 16.4 6 6 85 80 51812KP[1]4T0 440.0 18.1 19.1 5 5 85 80 52212KP[1]5T0 540.0 18.5 19.5 5 5 100 90 52712KP[1]5T0 0.82 1.0 1.2 18.5 x 35.5 x 43 1.5 21.5 x 38.5 x 42 1.8 24 x 44 x 42 2.2 2.7 - 18 x 32.5 x 41.5 30 x 45 x 42 37.5 10.2 20.3 200 Notes (1) I RMS at 85 °C ambient temperature and 100 kHz (2) ESR at 85 °C and 100 kHz (3) Maximum tan δ value at 100 kHz (4) Please replace “[1]” by the lead length code and the “[2]” by the packaging type in accordance with section “Composition of Catalog Number” Revision: 30-Jun-2023 Document Number: 28255 8 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING CODE URDC (V) CAP. (μF) DIMENSION wxhxl (mm) P1 (mm) P2 (mm) du/dt IPEAK (V/μs)R (A) IRMS (1) (A) ESR (2) (mΩ) tan δ (3) (10-4) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS ORDERING CODE (4) MKP385e.... URAC = 550 V, Up-p = 1600 V, C-TOL. = ± 10 % 0.0039 7.8 1.2 - 139 - 20 - 2391AKF[1]2[2]0 0.0047 9.4 1.3 - 116 - 20 - 2471AKF[1]2[2]0 11.2 1.4 - 102 - 20 - 2561AKF[1]2[2]0 13.6 1.6 - 85 - 20 - 2681AKF[1]2[2]0 0.0082 16.4 1.7 - 73 - 20 - 2821AKF[1]2[2]0 0.010 20.0 1.8 - 63 - 25 - 3101AKF[1]2[2]0 24.0 2.0 - 53 - 25 - 3121AKF[1]2[2]0 30.0 2.4 - 42 - 25 - 3151AKF[1]2[2]0 36.0 2.7 - 35 - 25 - 3181AKF[1]2[2]0 44.0 3.2 - 29 - 25 - 3221AKF[1]2[2]0 54.0 3.5 - 24 - 30 - 3271AKF[1]2[2]0 66.0 4.0 - 20 - 30 - 3331AKF[1]2[2]0 0.0056 0.0068 7.0 x 13.5 x 17.5 15 0.012 0.015 0.018 0.022 0.027 - 2000 8.5 x 15.0 x 17.5 10.0 x 16.5 x 17.5 0.033 10.5 x 17.5 x 18.0 0.039 11.0 x 18.5 x 18.0 78.0 4.4 - 17 - 30 - 3391AKF[1]2[2]0 0.010 7.0 x 16.5 x 26.0 17.0 2.1 - 73 - 25 - 3101AKI[1]2[2]0 0.012 20.4 2.5 - 60 - 25 - 3121AKI[1]2[2]0 0.015 25.5 2.6 - 55 - 25 - 3151AKI[1]2[2]0 30.6 2.9 - 46 - 25 - 3181AKI[1]2[2]0 37.4 3.1 - 41 - 25 - 3221AKI[1]2[2]0 45.9 3.4 - 33 - 30 - 3271AKI[1]2[2]0 56.1 3.5 - 30 - 30 - 3331AKI[1]2[2]0 0.039 66.3 3.8 - 26 - 30 - 3391AKI[1]2[2]0 0.047 79.9 4.5 - 21 - 30 - 3471AKI[1]2[2]0 0.018 0.022 8.5 x 18.0 x 26.0 0.027 22.5 0.033 1600 0.056 - 1700 10.0 x 19.5 x 26.0 95.2 4.9 - 18 - 35 - 3561AKI[1]2[2]0 115.6 5.9 - 15 - 35 - 3681AKI[1]2[2]0 139.4 6.4 - 13 - 40 - 3821AKI[1]2[2]0 0.10 170.0 7.0 - 11 - 40 - 4101AKI[1]2[2]0 0.068 81.6 5.1 - 20 - 40 - 3681AKK[1]2[2]0 0.068 0.082 0.082 12.0 x 22.0 x 26.0 11.0 x 21.0 x 31.0 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 13.0 x 23.0 x 31.0 15.0 x 25.0 x 31.0 18 x 32.5 x 41.5 0.68 21.5 x 38.5 x 42 1.20 1200 21.0 x 31.0 x 31.0 18.5 x 35.5 x 43 1.00 - 18.0 x 28.0 x 31.0 0.56 0.82 27.5 - 37.5 10.2 24 x 44 x 42 30 x 45 x 42 20.3 450 98.4 5.6 - 16 - 40 - 3821AKK[1]2[2]0 120.0 6.1 - 14 - 45 - 4101AKK[1]2[2]0 144.0 7.2 - 11 - 45 - 4121AKK[1]2[2]0 180.0 8.6 - 9 - 45 - 4151AKK[1]2[2]0 216.0 9.3 - 8 - 50 - 4181AKK[1]2[2]0 264.0 11.2 - 7 - 60 - 4221AKK[1]2[2]0 324.0 12.2 - 5 - 65 - 4271AKK[1]2[2]0 396.0 14.4 - 5 - 70 - 4331AKK[1]2[2]0 175.5 11.2 - 8 - 25 - 4391AKP[1]2T0 211.5 12.2 - 6 - 25 - 4471AKP[1]2T0 252.0 13.7 14.4 6 6 25 25 4561AKP[1]4T0 306.0 15.4 16.2 5 5 30 30 4681AKP[1]4T0 369.0 17.0 17.9 5 5 35 35 4821AKP[1]4T0 450.0 17.2 18.0 5 5 40 40 5101AKP[1]4T0 540.0 18.2 19.1 5 5 50 45 5121AKP[1]5T0 Notes (1) I RMS at 85 °C ambient temperature and 100 kHz (2) ESR at 85 °C and 100 kHz (3) Maximum tan δ value at 100 kHz (4) Please replace “[1]” by the lead length code and the “[2]” by the packaging type in accordance with section “Composition of Catalog Number” Revision: 30-Jun-2023 Document Number: 28255 9 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING CODE URDC (V) CAP. (μF) DIMENSION wxhxl (mm) P1 (mm) P2 (mm) du/dt IPEAK (V/μs)R (A) IRMS (1) (A) ESR (2) (mΩ) tan δ (3) (10-4) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS URAC = 700 V, Up-p = 2000 V, C-TOL. = ± 10 % 2.9 0.7 420 20 3.5 0.8 351 20 4.4 0.9 281 20 5.2 0.9 234 20 6.4 1.0 200 20 7.8 1.1 163 20 9.6 1.2 139 25 11.3 1.3 118 25 13.6 1.4 98 25 2900 16.2 1.5 87 25 19.7 1.8 72 25 23.8 2.0 59 25 29.0 2.2 49 25 34.8 2.6 41 25 43.5 2.9 33 25 52.2 3.4 28 25 63.8 3.8 23 25 25.0 2.3 72 25 30.0 2.5 60 25 37.5 2.6 55 30 45.0 2.9 46 30 55.0 3.2 38 30 2500 67.5 3.7 31 30 82.5 4.1 26 30 97.5 4.9 22 30 117.5 5.3 18 30 140.0 5.8 15 35 37.4 3.5 42 30 45.9 3.9 34 30 56.1 4.0 33 30 66.3 4.3 28 30 79.9 4.7 23 30 95.2 5.5 20 35 1700 115.6 6.1 16 35 139.4 7.1 14 40 170.0 7.8 11 40 204.0 9.3 9 45 255.0 10.3 8 45 306.0 12.1 7 45 132.0 11.0 11.6 8 8 15 15 162.0 11.2 11.8 8 7 20 20 198.0 12.6 13.2 7 7 20 20 600 234.0 14.2 14.9 6 6 20 20 10.2 282.0 15.6 16.4 6 6 25 25 336.0 16.1 17.0 5 5 25 25 20.3 408.0 17.7 18.6 5 5 30 30 ORDERING CODE (4) MKP385e.... 2102AKF[1]2[2]0 0.0010 0.0012 2122AKF[1]2[2]0 0.0015 2152AKF[1]2[2]0 0.0018 2182AKF[1]2[2]0 0.0022 2222AKF[1]2[2]0 7.0 x 13.5 x 17.5 0.0027 2272AKF[1]2[2]0 0.0033 2332AKF[1]2[2]0 0.0039 2392AKF[1]2[2]0 0.0047 2472AKF[1]2[2]0 15 0.0056 2562AKF[1]2[2]0 0.0068 2682AKF[1]2[2]0 0.0082 8.5 x 15.0 x 17.5 2822AKF[1]2[2]0 0.010 3102AKF[1]2[2]0 0.012 3122AKF[1]2[2]0 10.0 x 16.5 x 17.5 0.015 3152AKF[1]2[2]0 0.018 10.5 x 17.5 x 18.0 3182AKF[1]2[2]0 0.022 11.0 x 18.5 x 18.0 3222AKF[1]2[2]0 0.010 3102AKI[1]2[2]0 0.012 3122AKI[1]2[2]0 0.015 8.5 x 18.0 x 26.0 3152AKI[1]2[2]0 0.018 3182AKI[1]2[2]0 0.022 3222AKI[1]2[2]0 22.5 3272AKI[1]2[2]0 2000 0.027 10.0 x 19.5 x 26.0 0.033 3332AKI[1]2[2]0 0.039 3392AKI[1]2[2]0 0.047 12.0 x 22.0 x 26.0 3472AKI[1]2[2]0 0.056 3562AKI[1]2[2]0 0.022 3222AKK[1]2[2]0 0.027 3272AKK[1]2[2]0 0.033 11.0 x 21.0 x 31.0 3332AKK[1]2[2]0 0.039 3392AKK[1]2[2]0 0.047 3472AKK[1]2[2]0 0.056 3562AKK[1]2[2]0 13.0 x 23.0 x 31.0 27.5 0.068 3682AKK[1]2[2]0 0.082 3822AKK[1]2[2]0 15.0 x 25.0 x 31.0 0.10 4102AKK[1]2[2]0 0.12 4122AKK[1]2[2]0 18.0 x 28.0 x 31.0 0.15 4152AKK[1]2[2]0 0.18 21.0 x 31.0 x 31.0 4182AKK[1]2[2]0 0.22 4222AKP[1]4T0 18.0 x 32.5 x 41.5 0.27 4272AKP[1]4T0 0.33 18.5 x 35.5 x 43 4332AKP[1]4T0 0.39 21.5 x 38.5 x 42 37.5 4392AKP[1]4T0 0.47 4472AKP[1]4T0 24 x 44 x 42 0.56 4562AKP[1]4T0 0.68 30 x 45 x 42 4682AKP[1]5T0 Notes (1) I RMS at 85 °C ambient temperature and 100 kHz (2) ESR at 85 °C and 100 kHz (3) Maximum tan δ value at 100 kHz (4) Please replace “[1]” by the lead length code and the “[2]” by the packaging type in accordance with section “Composition of Catalog Number” Revision: 30-Jun-2023 Document Number: 28255 10 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING CODE URDC (V) CAP. (μF) DIMENSION wxhxl (mm) P1 (mm) P2 (mm) du/dt IPEAK (V/μs)R (A) IRMS (1) (A) ESR (2) (mΩ) tan δ (3) (10-4) 2 4 2 4 2 4 PINS PINS PINS PINS PINS PINS ORDERING CODE (4) MKP385e.... URAC = 800 V, Up-p = 2250 V, C-TOL. = ± 10 % 0.0010 0.0012 7.0 x 16.5 x 26.0 0.8 - 493 - 20 - 2102BKI[1]2[2]0 3.0 0.9 - 411 - 20 - 2122BKI[1]2[2]0 0.0015 3.8 1.1 - 338 - 20 - 2152BKI[1]2[2]0 0.0018 4.5 1.2 - 281 - 20 - 2182BKI[1]2[2]0 0.0022 5.5 1.3 - 232 - 25 - 2222BKI[1]2[2]0 6.8 1.3 - 213 - 25 - 2272BKI[1]2[2]0 8.3 1.5 - 175 - 25 - 2332BKI[1]2[2]0 0.0027 0.0033 8.5 x 18.0 x 26.0 0.0039 9.8 1.5 - 160 - 25 - 2392BKI[1]2[2]0 11.8 1.7 - 133 - 25 - 2472BKI[1]2[2]0 14.0 1.8 - 112 - 25 - 2562BKI[1]2[2]0 0.0068 17.0 2.2 - 93 - 25 - 2682BKI[1]2[2]0 0.0082 10.0 x 19.5 x 26.0 20.5 2.4 - 77 - 25 - 2822BKI[1]2[2]0 0.010 25.0 2.6 - 65 - 25 - 3102BKI[1]2[2]0 22.5 0.0047 - 2500 0.0056 0.012 0.015 0.018 2500 2.5 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 12.0 x 22.0 x 26.0 12.5 x 22.5 x 26.5 11.0 x 21.0 x 31.0 13.0 x 23.0 x 31.0 15.0 x 25.0 x 31.0 15.7 x 28.5 x 41.5 18 x 32.5 x 41.5 0.15 18.5 x 35.5 x 43 0.27 0.33 0.39 1700 21.0 x 31.0 x 31.0 0.10 0.18 - 18.0 x 28.0 x 31.0 0.12 0.22 27.5 21.5 x 38.5 x 42 - 37.5 10.2 24 x 44 x 42 30 x 45 x 42 20.3 1000 30.0 3.1 - 54 - 30 - 3122BKI[1]2[2]0 37.5 3.5 - 43 - 30 - 3152BKI[1]2[2]0 45.0 3.9 - 37 - 30 - 3182BKI[1]2[2]0 25.5 2.9 - 60 - 30 - 3152BKK[1]2[2]0 30.6 3.2 - 51 - 30 - 3182BKK[1]2[2]0 37.4 3.7 - 42 - 30 - 3222BKK[1]2[2]0 45.9 4.1 - 35 - 30 - 3272BKK[1]2[2]0 56.1 4.8 - 29 - 30 - 3332BKK[1]2[2]0 66.3 5.2 - 25 - 30 - 3392BKK[1]2[2]0 79.9 6.1 - 22 - 30 - 3472BKK[1]2[2]0 95.2 6.6 - 19 - 35 - 3562BKK[1]2[2]0 115.6 7.7 - 16 - 35 - 3682BKK[1]2[2]0 139.4 8.2 - 14 - 40 - 3822BKK[1]2[2]0 100.0 8.0 - 11 - 10 - 4102BKP[1]2T0 120.0 9.5 - 10 - 10 - 4122BKP[1]2T0 150.0 11.2 11.8 8 8 10 10 4152BKP[1]4T0 180.0 12.4 13.0 8 8 15 15 4182BKP[1]4T0 220.0 13.7 14.4 6 6 15 15 4222BKP[1]4T0 270.0 15.5 16.2 6 6 15 15 4272BKP[1]4T0 330.0 17.5 18.3 5 5 15 15 4332BKP[1]5T0 390.0 18.2 19.1 5 5 15 15 4392BKP[1]5T0 Notes (1) I RMS at 85 °C ambient temperature and 100 kHz (2) ESR at 85 °C and 100 kHz (3) Maximum tan δ value at 100 kHz (4) Please replace “[1]” by the lead length code and the “[2]” by the packaging type in accordance with section “Composition of Catalog Number” Revision: 30-Jun-2023 Document Number: 28255 11 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents PACKAGING INFORMATION DIMENSIONS (1) (mm) MASS (2) (g) 7.0 x 13.5 x 17.5 8.5 x 15.0 x 17.5 10.0 x 16.5 x 17.5 10.5 x 17.5 x 18.0 11.0 x 18.5 x 18.0 1.8 2.4 3 4 5 7.0 x 16.5 x 26.0 8.5 x 18.0 x 26.0 10.0 x 19.5 x 26.0 12.0 x 22.0 x 26.0 12.5 x 22.5 x 26.5 2.9 3.8 6.8 7.8 10 9.0 x 19.0 x 31.0 11.0 x 21.0 x 31.0 13.0 x 23.0 x 31.0 15.0 x 25.0 x 31.0 18.0 x 28.0 x 31.0 21.0 x 31.0 x 31.0 5.5 7.4 9.2 12.3 16.1 18.3 15.7 x 28.5 x 41.5 18.0 x 32.5 x 41.5 18.5 x 35.5 x 43.0 21.5 x 38.5 x 42.0 24.0 x 44.0 x 42.0 30.0 x 45.0 x 42.0 17.92 23.68 29.41 37.68 47.37 58.82 35.0 x 50.0 x 57.5 99.0 SPQ (pcs) LOOSE IN BOX It ≤ 5 mm It = 25 mm PITCH = 15 mm ± 0.4 mm 0.80 ± 0.08 750 500 0.80 ± 0.08 750 500 0.80 ± 0.08 500 450 0.80 ± 0.08 225 400 0.80 ± 0.08 225 350 PITCH = 22.5 mm ± 0.4 mm 0.80 ± 0.08 200 250 0.80 ± 0.08 200 250 0.80 ± 0.08 200 200 0.80 ± 0.08 150 200 0.80 ± 0.08 140 400 PITCH = 27.5 mm ± 0.4 mm 0.80 ± 0.08 100 150 0.80 ± 0.08 100 125 0.80 ± 0.08 100 125 0.80 ± 0.08 100 125 0.80 ± 0.08 100 100 0.80 ± 0.08 50 75 PITCH = 37.5 mm ± 0.4 mm 0.95 ± 0.10 70 0.95 ± 0.10 60 0.95 ± 0.10 105 0.95 ± 0.10 91 0.95 ± 0.10 77 0.95 ± 0.10 63 PITCH = 57.5 mm ± 0.4 mm 0.95 ± 0.10 40 dt (mm) REEL PACK (3) H = 18.5 mm; P0 = 12.7 mm 800 650 600 600 550 500 450 350 300 300 - Notes • SPQ = Standard Packing Quantity (1) For tolerances see section “Space Requirements on Printed-Circuit Board” (2) Weight for short lead product only (3) H = in-tape height; P = sprocket hole distance 0 MOUNTING Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoleers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to packaging information www.vishay.com/doc?28139 Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: • For original pitch = 15 mm the capacitors shall be mechanically fixed by the leads • For larger pitches the capacitors shall be mounted in the same way and the body clamped Space Requirements on Printed-Circuit Board The maximum space for length (lmax.), width (wmax.), and height (hmax.) of film capacitors to take in account on the printed circuit board is shown in the drawings: For products with pitch ≤ 15 mm, Δw = Δl = 0.3 mm and Δh = 0.1 mm For products with 15 mm < pitch ≤ 27.5 mm, Δw = Δl = 0.5 mm and Δh = 0.1 mm For products with pitch = 37.5 mm and 52.5 mm, Δw = Δl = 0.7 mm and Δh = 0.5 mm Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. Revision: 30-Jun-2023 Document Number: 28255 12 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents wmax. = w + Δ Eccentricity Imax. = I + Δ hmax. = h + Δ Seating plane For the minimum product dimensions for length (lmin.), width (wmin.), and height (hmin.) following tolerances of the components are valid: lmin. = l - Δl, wmin. = w - Δw, and hmin. = h - Δh following For products with pitch = 15 mm, Δl = 0.5 mm and Δw = Δh = 0.5 mm For products with 15 mm < pitch < 27.5 mm, Δl = 1.0 mm and Δw = Δh = 0.5 mm For products with pitch = 27.5 mm, Δw = Δl = Δh = 1.0 mm For products with pitch = 37.5 mm and 52.5 mm. Δw = Δl = 0.7 mm and Δh = 0.5 mm SOLDERING CONDITIONS For general soldering conditions and wave soldering profile we refer to the document “Soldering Conditions Vishay Film Capacitors”: www.vishay.com/doc?28171 STORAGE TEMPERATURE Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation. RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 °C ± 1 °C, an atmospheric pressure of 86 kPa to 106 kPa, and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. CHARACTERISTICS Axis Title Axis Title 4 10000 1.2 10000 3 1.0 2 100 -3 -4 1st line 2nd line -2 2nd line Factor -1 1000 0.8 1000 0 1st line 2nd line 2nd line ΔC/C (%) 1 0.6 100 0.4 0.2 -5 10 -6 -60 -40 -20 0 20 40 60 80 100 120 10 0 -60 -20 20 60 100 140 Ambient Temperature (°C) Ambient Temperature (°C) Capacitance as a function of ambient temperature (typical curve) (1 kHz) Max. DC and AC voltage as a function of temperature Revision: 30-Jun-2023 Document Number: 28255 13 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents Axis Title Axis Title 10000 0.47 μF 1000 1st line 2nd line 2nd line Impedance (Ω) 1 μF 10 15 μF 1 3.9 μF 100 0.1 0.01 1 10 100 25 1000 1000 20 15 100 10 5 10 10 000 0.001 0.1 30 2nd line Maximum ΔT Component (°C) 1000 100 10000 35 1st line 2nd line 10 000 10 0 45 65 85 105 125 Frequency (kHz) Ambient Temperature (°C) Impedance as a function of frequency (typical curve) Maximum allowed component temperature rise (ΔT) as a function of ambient temperature (Tamb) Axis Title 10000 1 000 000 RC (s) 1st line 1st line 2nd line 1000 100 000 100 10 000 10 0 30 60 90 120 Ambient Temperature (°C) 2nd line Insulation resistance as a function of ambient temperature (typical curve) Axis Title Axis Title 1000 1000 10000 10000 100 47 nF 100 nF 470 nF 1 μF 2.2 μF 3.9 μF 100 1000 1st line 2nd line 100 1000 2nd line AC Voltage (V) 47 nF 100 nF 470 nF 1 μF 2.2 μF 3.9 μF 1st line 2nd line 2nd line AC Voltage (V) 85 °C < Tcomp ≤ 105 °C 100 Tcomp ≤ 85 °C 10 100 1000 10 000 100 000 10 1 000 000 10 100 1000 10 000 100 000 10 1 000 000 Frequency (Hz) Frequency (Hz) Maximum RMS voltage as a function of frequency (400 VDC) Maximum RMS voltage as a function of frequency (400 VDC) Revision: 30-Jun-2023 Document Number: 28255 14 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents Axis Title Axis Title 1000 1000 10000 10000 100 1000 27 nF 100 nF 470 nF 1 μF 2.2 μF 100 1st line 2nd line 100 1000 2nd line AC Voltage (V) 27 nF 100 nF 470 nF 1 μF 2.2 μF 1st line 2nd line 2nd line AC Voltage (V) 85 °C < Tcomp ≤ 105 °C 100 Tcomp ≤ 85 °C 10 100 1000 10 000 100 000 10 1 000 000 10 100 1000 10 000 100 000 10 1 000 000 Frequency (Hz) Frequency (Hz) Maximum RMS voltage as a function of frequency (630 VDC) Maximum RMS voltage as a function of frequency (630 VDC) Axis Title Axis Title 1000 1000 10000 10000 100 10 nF 47 nF 100 nF 220 nF 470 nF 1 μF 100 1000 1st line 2nd line 100 1000 2nd line AC Voltage (V) 10 nF 47 nF 100 nF 220 nF 470 nF 1 μF 1st line 2nd line 2nd line AC Voltage (V) 85 °C < Tcomp ≤ 105 °C 100 Tcomp ≤ 85 °C 10 10 100 10 000 10 1 000 000 100 1000 10 000 100 000 10 1 000 000 Frequency (Hz) Frequency (Hz) Maximum RMS voltage as a function of frequency (850 VDC) Maximum RMS voltage as a function of frequency (850 VDC) Axis Title Axis Title 1000 1000 10000 10000 100 47 nF 100 nF 220 nF 470 nF 820 nF 100 1000 1st line 2nd line 100 1000 2nd line AC Voltage (V) 47 nF 100 nF 220 nF 470 nF 820 nF 1st line 2nd line 2nd line AC Voltage (V) 85 °C < Tcomp ≤ 105 °C 100 Tcomp ≤ 85 °C 10 100 1000 10 000 100 000 10 1 000 000 10 100 1000 10 000 100 000 10 1 000 000 Frequency (Hz) Frequency (Hz) Maximum RMS voltage as a function of frequency (1000 VDC) Maximum RMS voltage as a function of frequency (1000 VDC) Revision: 30-Jun-2023 Document Number: 28255 15 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents Axis Title Axis Title 1000 1000 10000 10000 100 100 10 nF 22 nF 47 nF 100 nF 220 nF 470 nF 100 1000 1st line 2nd line 1000 2nd line AC Voltage (V) 10 nF 22 nF 47 nF 100 nF 220 nF 470 nF 1st line 2nd line 2nd line AC Voltage (V) 85 °C < Tcomp ≤ 105 °C 100 Tcomp ≤ 85 °C 10 100 1000 10 000 100 000 10 1 000 000 10 100 1000 10 000 100 000 10 1 000 000 Frequency (Hz) Frequency (Hz) Maximum RMS voltage as a function of frequency (1250 VDC) Maximum RMS voltage as a function of frequency (1250 VDC) Axis Title Axis Title 1000 1000 100 100 4.7 nF 10 nF 47 nF 100 nF 220 nF 1000 100 100 Tcomp ≤ 85 °C 85 °C < Tcomp ≤ 105 °C 10 10 100 10000 1st line 2nd line 4.7 nF 10 nF 47 nF 100 nF 220 nF 2nd line AC Voltage (V) 10000 1st line 2nd line 2nd line AC Voltage (V) 1000 10 000 10 10 1 000 000 100 10 000 1 000 000 Frequency (Hz) Frequency (Hz) Maximum RMS voltage as a function of frequency (1600 VDC) Maximum RMS voltage as a function of frequency (1600 VDC) Axis Title Axis Title 100 2nd line AC Voltage (V) 1000 100 1000 100 100 Tcomp ≤ 85 °C 85 °C < Tcomp ≤ 105 °C 10 10 100 10000 1 nF 4.7 nF 22 nF 47 nF 100 nF 1st line 2nd line 1 nF 4.7 nF 22 nF 47 nF 100 nF 2nd line AC Voltage (V) 1000 10000 1st line 2nd line 1000 10 000 1 000 000 10 10 100 10 000 1 000 000 Frequency (Hz) Frequency (Hz) Maximum RMS voltage as a function of frequency (2000 VDC) Maximum RMS voltage as a function of frequency (2000 VDC) Revision: 30-Jun-2023 Document Number: 28255 16 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents Axis Title Axis Title 1000 1 nF 4.7 nF 10 nF 22 nF 47 nF 82 nF 2nd line AC Voltage (V) 1000 100 100 10000 1 nF 4.7 nF 10 nF 22 nF 47 nF 82 nF 100 100 Tcomp ≤ 85 °C 85 °C < Tcomp ≤ 105 °C 10 10 100 1000 1st line 2nd line 10000 1st line 2nd line 2nd line AC Voltage (V) 1000 10 000 10 10 1 000 000 100 10 000 1 000 000 Frequency (Hz) Frequency (Hz) Maximum RMS voltage as a function of frequency (2500 VDC) Maximum RMS voltage as a function of frequency (2500 VDC) Axis Title 10000 1.6 1.2 1000 1.0 1st line 2nd line 2nd line IRMS Operational / IRMS max. 1.4 0.8 0.6 100 0.4 0.2 10 0 45 65 85 105 125 Ambient Temperature (°C) Maximum IRMS current in function of the ambient temperature (typical curve) Axis Title Axis Title ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ 10 ▬▬▬ 3.3 μF 3.9 μF 4.7 μF 5.6 μF 6.8 μF 8.2 μF 10 μF 12 μF 15 μF 10000 ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ 1000 ▬▬▬ 2nd line ESR (mΩ) ▬▬▬ 1st line 2nd line ▬▬▬ 2nd line ESR (mΩ) 100 10000 ▬▬▬ ▬▬▬ 2.7 μF 3.3 μF 3.9 μF 4.7 μF 5.6 μF 6.8 μF 8.2 μF 15 μF 10 100 10 1 1 10 100 100 10 1 1 10 100 Frequency (kHz) Frequency (kHz) ESR as a function of frequency (400 VDC) (typical curve) ESR as a function of frequency (630 VDC) (typical curve) Revision: 30-Jun-2023 1000 1st line 2nd line 100 Document Number: 28255 17 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents Axis Title Axis Title ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ 1.5 μF 1.7 μF 1.8 μF 2.2 μF 2.7 μF 3.3 μF 3.9 μF 4.7 μF 10000 ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ 1000 ▬▬▬ 10 2nd line ESR (mΩ) ▬▬▬ 1st line 2nd line ▬▬▬ ▬▬▬ 1.0 μF 1.2 μF 1.5 μF 1.8 μF 2.2 μF 2.7 μF 3.3 μF 10 100 100 10 1 10 10 1 100 1 100 Frequency (kHz) Frequency (kHz) ESR as a function of frequency (850 VDC) (typical curve) ESR as a function of frequency (1000 VDC) (typical curve) Axis Title Axis Title 100 100 10000 ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ 10000 ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ 1000 ▬▬▬ 10 2nd line ESR (mΩ) ▬▬▬ 0.68 μF 0.82 μF 1.0 μF 1.2 μF 1.5 μF 1.8 μF 2.2 μF 2.7 μF 1st line 2nd line ▬▬▬ 2nd line ESR (mΩ) 10 ▬▬▬ 0.39 μF 0.47 μF 0.56 μF 0.68 μF 0.82 μF 1.0 μF 1.2 μF 10 100 100 10 1 1 10 10 1 100 1 10 100 Frequency (kHz) Frequency (kHz) ESR as a function of frequency (1250 VDC) (typical curve) ESR as a function of frequency (1600 VDC) (typical curve) Axis Title Axis Title 10000 ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ 2nd line ESR (mΩ) ▬▬▬ 0.22 μF 0.27 μF 0.33 μF 0.39 μF 0.47 μF 0.56 μF 0.68 μF 10 1 1 10 100 10000 1000 ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ 1000 100 ▬▬▬ ▬▬▬ 2nd line ESR (mΩ) ▬▬▬ 1st line 2nd line 1000 100 ▬▬▬ 100 10 10 1 0.10 μF 0.12 μF 0.15 μF 0.18 μF 0.22 μF 0.27 μF 0.33 μF 0.39 μF 1000 100 10 1 10 100 Frequency (kHz) Frequency (kHz) ESR as a function of frequency (2000 VDC) (typical curve) ESR as a function of frequency (2500 VDC) (typical curve) Revision: 30-Jun-2023 1000 1st line 2nd line 1 1000 1st line 2nd line 2nd line ESR (mΩ) 100 10000 1st line 2nd line 100 Document Number: 28255 18 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents Axis Title 10000 1000 ▬▬▬ 2nd line Dissipation Factor (x 10-4) ▬▬▬ ▬▬▬ ▬▬▬ 100 ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ ▬▬▬ 10 ▬▬▬ Curve Curve Curve Curve Curve Curve Curve Curve Curve Curve Curve Curve 1 2 3 4 5 6 7 8 9 10 11 12 1000 1st line 2nd line ▬▬▬ 100 1 100 1000 10 000 100 000 10 1 000 000 Frequency (Hz) Tangent of loss angle as a function of frequency (typical curves) 400 V: 0.047 ≤ C ≤ 0.068 μF, curve 3 0.082 ≤ C ≤ 0.18 μF, curve 4 0.22 ≤ C ≤ 0.39 μF, curve 8 0.47 ≤ C ≤ 1.2 μF, curve 11 1.5 ≤ C ≤ 3.9 μF, curve 12 630 V: 0.027 ≤ C ≤ 0.033 μF, curve 2 0.039 ≤ C ≤ 0.1 μF, curve 3 0.12 ≤ C ≤ 0.24 μF, curve 7 0.27 ≤ C ≤ 1 μF, curve 9 1.2 ≤ C ≤ 2.2 μF, curve 10 850 V: 0.01 ≤ C ≤ 0.027 μF, curve 1 0.033 ≤ C ≤ 0.068 μF, curve 3 0.082 ≤ C ≤ 0.15 μF, curve 4 0.18 ≤ C ≤ 0.68 μF, curve 5 0.82 ≤ C ≤ 1.2 μF, curve 6 1000 V: 0.018 ≤ C ≤ 0.047 μF, curve 1 0.056 ≤ C ≤ 0.082 μF, curve 3 0.1 ≤ C ≤ 0.27 μF, curve 4 0.33 ≤ C ≤ 0.82 μF, curve 5 1250 V: 0.0082 ≤ C ≤ 0.039 μF, curve 1 0.047 ≤ C ≤ 0.082 μF, curve 3 0.1 ≤ C ≤ 0.56 μF, curve 4 1600 V: 0.0039 ≤ C ≤ 0.012 μF, curve 1 0.015 ≤ C ≤ 0.22 μF, curve 2 0.27 ≤ C ≤ 0.33 μF, curve 3 2000 V: 0.001 ≤ C ≤ 0.012 μF, curve 1 0.015 ≤ C ≤ 0.18 μF, curve 2 2500 V: 0.001 ≤ C ≤ 0.082 μF, curve 1 Revision: 30-Jun-2023 Document Number: 28255 19 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents HEAT CONDUCTIVITY (G) AS A FUNCTION OF ORIGINAL PITCH AND CAPACITOR BODY THICKNESS IN mW/°C HEAT CONDUCTIVITY (mW/°C) wmax. (mm) PITCH 15 mm PITCH 22.5 mm PITCH 27.5 mm PITCH 37.5 mm PITCH 52.5 mm 7.0 14 22 - - - 8.5 16 25 - - - 9.0 19 - 29 - - 10.0 21 29 - - - 10.5 / 11.0 22 - 34 - - 12.0 - 34 - - - 12.5 / 13.0 - 36 40 - - 15.0 - - 45 - - 15.7 - - - 55 - 18.0 - - 54 64 - 18.5 - - - 71 - 21.0 - - 63 - - 21.5 - - - 82 - 24.0 - - - 94 - 25.0 - - - - - 30.0 - - - 108 - 35.0 - - - - 146 POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The power dissipation can be calculated according type detail specification www.vishay.com/doc?28147 The component temperature rise (ΔT) can be measured (see section “Measuring the component temperature” for more details) or calculated by ΔT = P/G: • ΔT = component temperature rise (°C) • P = power dissipation of the component (mW) • G = heat conductivity of the component (mW/°C) MEASURING THE COMPONENT TEMPERATURE A thermocouple must be attached to the capacitor body as in: Thermocouple CBA758 The temperature is measured in unloaded (Tamb) and maximum loaded condition (TC). The temperature rise is given by ΔT = TC - Tamb. To avoid radiation or convection, the capacitor should be tested in a wind-free box. Revision: 30-Jun-2023 Document Number: 28255 20 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents APPLICATION NOTES For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For information depending of the capacitance value and the number of parallel connections contact: dc-film@vishay.com These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (Up) shall not be greater than the rated DC voltage (URDC) 2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum (Up-p) to avoid the ionization inception level 3. The voltage peak slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URDC and divided by the applied voltage. For all other pulses following equation must be fulfilled: T 2 dU dU 2 ×   -------- × dt < U RDC ×  -------- dt rated dt 0 T is the pulse duration 4. The maximum component surface temperature rise must be lower than the limits (see graph “Max. allowed component temperature rise”) 5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in the table: “Heat Conductivity” 6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with an impedance to the mains the applicant must guarantee that the following conditions are fulfilled in any case (spikes and surge voltages from the mains included) Note • See table “Voltage Ratings and Temperature” 7. For capacitors with multiple pins in some cases it is allowed to feed current through the pins additionally to the capacitor to improve filtering properties I1 + I2 I1 P2 I2 P1 P2 I1 + I2 I1 P1 and P2 are the pin distance dimensions as mentioned in the mechanical dimensions. In this case the pins carry the currents I1 (= the fed through current) and I2 (= the capacitor current). Due to the additional heating up this fed through current must be limited to 10 % of the maximum allowed capacitor current I2. For other currents contact dc-film@vishay.com. Revision: 30-Jun-2023 Document Number: 28255 21 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents INSPECTION REQUIREMENTS General Notes Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Specific Reference Data”. IEC 60384-17 - FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC AC AND PULSE CAPACITORS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) As specified in Chapters “General data” of this specification 4.3.1 Initial measurements Capacitance Tangent of loss angle: C ≤ 1 μF at 100 kHz C > 1 μF at 10 kHz 4.3 Robustness of terminations Tensile: load 10 N; 10 s Bending: load 5 N; 4 x 90° 4.4 Resistance to soldering heat Method: 1 A Solder bath: 280 °C ± 5 °C Duration: 10 s No visible damage 4.14 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 min ± 0.5 min Recovery time: min. 1 h, max. 2 h 4.4.2 Final measurements Visual examination No visible damage Legible marking Capacitance lΔC/Cl ≤ 1 % of the value measured initially. Tangent of loss angle Increase of tan δ: ≤ 0.0005 for: C ≤ 100 nF at 100 kHz ≤ 0.0010 for: 100 nF < C ≤ 470 nF at 100 kHz ≤ 0.0015 for: 470 nF < C ≤ 1 μF at 100 kHz ≤ 0.0015 for: C > 1 μF at 10 kHz Compared to values measured in 4.3.1 SUB-GROUP C1B OTHER PART OF SAMPLE OF SUB-GROUP C1 4.6.1 Initial measurements Capacitance Tangent of loss angle: C ≤ 1 μF at 100 kHz C > 1 μF at 10 kHz 4.15 Solvent resistance of the marking Isopropylalcohol at room temperature Method: 1 Rubbing material: cotton wool Immersion time: 5 min ± 0.5 min 4.6 θA = -40 °C θB = +105 °C 5 cycles Duration t = 30 min Visual examination Rapid change of temperature Revision: 30-Jun-2023 No visible damage Legible marking No visible damage Document Number: 28255 22 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents IEC 60384-17 - FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC AC AND PULSE CAPACITORS SUB-CLAUSE NUMBER AND TEST SUB-GROUP C1B OTHER PART OF SAMPLE OF SUB-GROUP C1 4.7. Vibration CONDITIONS PERFORMANCE REQUIREMENTS Mounting: see section “Mounting” for more information Procedure B4 Frequency range: 10 Hz to 55 Hz. Amplitude: 0.75 mm or acceleration 98 m/s2 (whichever is less severe) Total duration 6 h. 4.7.2 Final inspection Visual examination Mounting: see section “Mounting” for more information No visible damage 4.9 Shock Pulse shape: half sine Acceleration: 490 m/s2 Duration of pulse: 11 ms 4.9.3 Final measurements Visual examination No visible damage Capacitance lΔC/Cl ≤ 2 % of the value measured in 4.6.1. Tangent of loss angle Increase of tan δ: ≤ 0.0005 ≤ 0.0005 for: C ≤ 100 nF at 100 kHz ≤ 0.0010 for: 100 nF < C ≤ 470 nF at 100 kHz ≤ 0.0015 for: 470 nF < C ≤ 1 μF at 100 kHz ≤ 0.0015 for: C > 1 μF at 10 kHz Compared to values measured in 4.6.1 Insulation resistance As specified in section “Insulation Resistance” of this specification. SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.10 Climatic sequence 4.10.2 Dry heat 4.10.3 Damp heat cyclic Test Db, first cycle 4.10.4 Cold 4.10.6 Damp heat cyclic Test Db remaining cycles 4.10.6.2 Final measurements Revision: 30-Jun-2023 Temperature +105 °C Duration: 16 h Temperature: -40 °C Duration: 2 h Voltage proof = URDC for 1 min within 15 min after removal from test chamber No breakdown or flashover Visual examination No visible damage Legible marking Capacitance lΔC/Cl ≤ 2 % of the value measured in 4.4.2 or 4.9.3 Tangent of loss angle Increase of tan δ: ≤ 0.0005 for: C ≤ 100 nF at 100 kHz ≤ 0.0010 for: 100 nF < C ≤ 470 nF at 100 kHz ≤ 0.0015 for: 470 nF < C ≤ 1 μF at 100 kHz ≤ 0.0015 for: C > 1 μF at 10 kHz Compared to values measured in 4.3.1 or 4.6.1 Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification. Document Number: 28255 23 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents IEC 60384-17 - FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC AC AND PULSE CAPACITORS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C2 4.11 Damp heat steady state 56 days; 40 °C; 90 % to 95 % RH no load 4.11.1 Initial measurements Capacitance Tangent of loss angle at 1 kHz 4.11.3 Final measurements Voltage proof = URDC for 1 min within 15 min after removal from test chamber No breakdown or flashover Visual examination No visible damage Legible marking Capacitance lΔC/Cl ≤ 2 % of the value measured in 4.11.1. Tangent of loss angle Increase of tan δ ≤ 0.0025 at 1 kHz Compared to values measured in 4.11.1. Insulation resistance ≥ 50 % of values specified in section “Insulation resistance” of this specification SUB-GROUP C2A 4.12A Damp heat steady state with load 60 °C; 93 % RH load: URDC duration: 56 days 4.12.1A Initial measurements Capacitance Tangent of loss angle at for C ≤ 1 μF at 10 kHz for C > 1 μF at 1 kHz 4.12.3A Final measurements Visual examination No visible damage Legible marking Capacitance lΔC/Cl ≤ 10 % of the value measured in 4.12.1. Tangent of loss angle Increase of tan δ: ≤ 0.0240 for C ≤ 1 μF or ≤ 0.0150 for C > 1 μF Compared to values measured in 4.12.1. Voltage proof URDC; 1 min between terminations No permanent breakdown or flashover Insulation resistance ≥ 50 % of values specified in section “Insulation resistance” of this specification Revision: 30-Jun-2023 Document Number: 28255 24 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents IEC 60384-17 - FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC AC AND PULSE CAPACITORS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C3A 4.12.1 Endurance Duration: 2000 h Temperature: 85 °C Voltage: 1.25 x URAC VRMS, 50 Hz AND Duration: 2000 h Temperature: 105 °C Voltage: 0.875 x URAC VRMS, 50 Hz 4.12.1.1 Initial measurements Capacitance Tangent of loss angle C ≤ 1 μF at 100 kHz C > 1 μF at 10 kHz 4.12.1.3 Final measurements Visual examination No visible damage Legible marking Capacitance lΔC/Cl ≤ 5 % for C > 10 nF lΔC/Cl ≤ 8 % for C ≤ 10 nF Compared to values measured in 4.12.1.1 Tangent of loss angle Increase of tan δ: ≤ 0.0005 for: C ≤ 100 nF at 100 kHz ≤ 0.0010 for: 100 nF < C ≤ 470 nF at 100 kHz ≤ 0.0015 for: 470 nF < C ≤ 1 μF at 100 kHz ≤ 0.0015 for: C > 1 μF at 10 kHz Compared to values measured in 4.12.1.1 Insulation resistance ≥ 50 % of values specified in section “Insulation resistance” of this specification. SUB-GROUP C3B 4.12.2 Endurance test at 50 Hz alternating voltage 0.625 x URAC at 125 °C 500 h 4.12.2.1 Initial measurements Capacitance Tangent of loss angle: C ≤ 1 μF at 100 kHz C > 1 μF at 10 kHz 4.12.2.3 Final measurements Visual examination No visible damage Legible marking Capacitance lΔC/Cl ≤ 10 % + 100 pF compared to values measured in 4.12.2.1 Tangent of loss angle Increase of tan δ: ≤ 0.0005 for: C ≤ 100 nF at 100 kHz ≤ 0.0010 for: 100 nF < C ≤ 470 nF at 100 kHz ≤ 0.0015 for: 470 nF < C ≤ 1 μF at 100 kHz ≤ 0.0015 for: C > 1 μF at 10 kHz Compared to values measured in 4.12.2.1 Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification. Revision: 30-Jun-2023 Document Number: 28255 25 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents IEC 60384-17 - FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC AC AND PULSE CAPACITORS SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C4 4.2.6 Temperature characteristics Initial measurements Intermediate measurements Final measurements 4.13 Charge and discharge Capacitance Capacitance at -40 °C Capacitance at 20 °C Capacitance at +125 °C For -40 °C to +20 °C: +1 % ≤ lΔC/Cl ≤ 3.75 % or for 20 °C to 125 °C: -7.5 % ≤ lΔC/Cl ≤ 0 % Compared to values measured in 4.12.1.1 Capacitance As specified in section “Capacitance” of this specification Insulation resistance As specified in section “Insulation Resistance” of this specification 10 000 cycles Charged to URDC Discharge resistance: U RDC R = -------------------------------------2.5 x C (dU/dt) 4.13.1 Initial measurements Capacitance Tangent of loss angle: C ≤ 1 μF at 100 kHz 1 μF < C ≤ 10 μF at 10 kHz C > 10 μF at 1 kHz 4.13.3 Final measurements Capacitance lΔC/Cl ≤ 1 % compared to values measured in 4.13.1. Tangent of loss angle Increase of tan δ: ≤ 0.0005 for: C ≤ 100 nF at 100 kHz ≤ 0.0010 for: 100 nF < C ≤ 470 nF at 100 kHz ≤ 0.0015 for: 470 nF < C ≤ 1 μF at 100 kHz ≤ 0.0015 for: C > 1 μF at 10 kHz Compared to values measured in 4.13.1 Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification. Revision: 30-Jun-2023 Document Number: 28255 26 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents AUTOMOTIVE AEC-Q200, REVISION D QUALIFICATION STRESS SAMPLE SIZE REVISION CONDITION 1. High temperature exposure (storage) D Test as per MIL-STD 202, method 108 Temp.: 105 ºC; unpowered Duration: 1000 h 77 2. Temperature cycling D Test as per JESD22, method JA-104 Total no. of cycles: 1000 cycles Lower temp.: -40 °C Upper temp: +105 °C Dwell each 30 min as per rev. D 77 PERFORMANCE REQUIREMENTS |ΔC/C| ≤ 5 % ≤ 0.0005 for: C ≤ 100 nF at 100 kHz ≤ 0.0010 for: 100 nF < C ≤ 470 nF at 100 kHz ≤ 0.0015 for: 470 nF < C ≤ 1 μF at 100 kHz ≤ 0.0015 for: C > 1 μF at 10 kHz IR > 50 % of initial specified value |ΔC/C| ≤ 5 % Increase of tan δ: ≤ 0.0005 for: C ≤ 100 nF at 100 kHz ≤ 0.0010 for: 100 nF < C ≤ 470 nF at 100 kHz ≤ 0.0015 for: 470 nF < C ≤ 1 μF at 100 kHz ≤ 0.0015 for: C > 1 μF at 10 kHz IR > 50 % of initial specified value |ΔC/C| ≤ 5 % Increase of tan δ: ≤ 0.0005 for: C ≤ 100 nF at 100 kHz ≤ 0.0010 for: 100 nF < C ≤ 470 nF at 100 kHz ≤ 0.0015 for: 470 nF < C ≤ 1 μF at 100 kHz ≤ 0.0015 for: C > 1 μF at 10 kHz 3. Moisture resistance D Test as per MIL-STD 202, method 106 10 cycles at 24 h/cycle unpowered 77 4. Biased humidity AC D Test as per MIL-STD 202, method 103 Temp.: 40 °C; RH: 93 %; URAC Duration: 1000 h 77 |ΔC/C| ≤ 5 % Increase of tan δ: ≤ 0.008 at 1 kHz IR > 50 % of initial specified value 5. Biased humidity DC D Test as per MIL-STD 202, method 103 Temp.: 40 °C; RH: 93 %; URDC Duration: 1000 h 77 |ΔC/C| ≤ 5 % Increase of tan δ: ≤ 0.008 at 1 kHz IR > 50 % of initial specified value 6. Operational life AC D Test as per MIL-STD 202, method 108 Temp. = 105 °C; load = URAC Duration: 1000 h 77 |ΔC/C| ≤ 5 % Increase of tan δ: ≤ 0.0005 for: C ≤ 100 nF at 100 kHz ≤ 0.0010 for: 100 nF < C ≤ 470 nF at 100 kHz ≤ 0.0015 for: 470 nF < C ≤ 1 μF at 100 kHz ≤ 0.0015 for: C > 1 μF at 10 kHz IR > 50 % of initial specified value IR > 50 % of initial specified value |ΔC/C| ≤ 5 % Increase of tan δ: ≤ 0.0005 for: C ≤ 100 nF at 100 kHz ≤ 0.0010 for: 100 nF < C ≤ 470 nF at 100 kHz ≤ 0.0015 for: 470 nF < C ≤ 1 μF at 100 kHz ≤ 0.0015 for: C > 1 μF at 10 kHz 7. Operational life DC D Test as per MIL-STD 202, method 108 Temp. = 105 °C; Load = URDC Duration: 1000 h 77 8. Terminal strength (leaded) D Test as per MIL-STD 202, method 211 Test leaded device lead integrity only. - A (pull-test): 2.27 kg (10 s) - C (wire-lead bend test): 227 g (3 x 3 s) 30 No visual damage 9. Resistance to solvents D MIL-STD-202 method 215 - Also aqueous chemical - OKEM clean or equivalent. Do not use banned solvents. 5 No visual damage Legible marking 10. Mechanical shock D MIL-STD-202 method 213 100 g's; 6 ms; half sine; 3.75 m/s 30 No visual damage IR > 50 % of initial specified value Revision: 30-Jun-2023 Document Number: 28255 27 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MKP385e www.vishay.com Vishay BCcomponents AUTOMOTIVE AEC-Q200, REVISION D QUALIFICATION STRESS REVISION CONDITION SAMPLE SIZE PERFORMANCE REQUIREMENTS 11. Vibration D MIL-STD-202 method 204 5 g's for 20 min 12 cycles x 3 directions 10 Hz to 2000 Hz 30 No visual damage 12. Resistance to soldering heat D MIL-STD-202 method 210 Temp.: 280 °C; time: 10 s solder within 1.5 mm of device body 30 |ΔC/C| ≤ 5 % Increase of tan δ: ≤ 0.0005 for: C ≤ 100 nF at 100 kHz ≤ 0.0010 for: 100 nF < C ≤ 470 nF at 100 kHz ≤ 0.0015 for: 470 nF < C ≤ 1 μF at 100 kHz ≤ 0.0015 for: C > 1 μF at 10 kHz IR > 50 % of initial specified value 13. Solderability D J-STD-002 Leaded: method A at 235 °C, category 3 (245 °C / 3 s) 15 Good tinning as evidence by free flowing of the solder with wetting of terminations > 95 % 14. Flammability D UL-94 One flame application Class B 15 V-0 is acceptable. Class B or C according IEC is also acceptable Revision: 30-Jun-2023 Document Number: 28255 28 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000