MMBD914-G
www.vishay.com
Vishay Semiconductors
Small Signal Switching Diode
FEATURES
• Silicon epitaxial planar diode
3
• Fast switching diode in case SOT-23, especially
suited for automatic insertion
• AEC-Q101 qualified available
(part number on request)
1
• Base P/N-G3 - green, commercial grade
2
• Material categorization:
for definitions of compliance please see
www.vishay.com/doc?99912
DESIGN SUPPORT TOOLS click logo to get started
Models
Available
MECHANICAL DATA
Case: SOT-23
Weight: approx. 8.1 mg
Packaging codes / options:
18/10K per 13" reel (8 mm tape), 10K/box
08/3K per 7" reel (8 mm tape), 15K/box
PARTS TABLE
PART
MMBD914-G
ORDERING CODE
CIRCUIT CONFIGURATION
TYPE MARKING
REMARKS
MMBD914-G3-08 or MMBD914-G3-18
Single
5DG
Tape and reel
UNIT
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
SYMBOL
VALUE
Peak reverse voltage
VRM
100
V
Maximum average forward rectified current
IF(AV)
200
mA
Ptot
225
mW
SYMBOL
VALUE
UNIT
Tj
150
°C
Storage temperature range
Tstg
-55 to +150
°C
Operating temperature range
Top
-55 to +150
°C
Maximum power dissipation
TEST CONDITION
Tamb = 25 °C
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
Maximum junction temperature
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
Forward voltage drop
Reverse current
Reverse recovery time
Diode capacitance
TEST CONDITION
SYMBOL
IF = 10 mA
VF
MIN.
TYP.
MAX.
1
UNIT
V
VR = 20 V
IR
25
nA
VR = 75 V
IR
5
μA
IF = 10 mA to iR = 1 mA,
VR = 6 V, RL = 100
trr
4
ns
VR = 0 V, f = 1 MHz
CD
4
pF
Rev. 1.2, 13-Feb-18
Document Number: 85418
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MMBD914-G
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters (inches): SOT-23
1.15 (0.045)
0° t
o8
°
0.2 (0.008)
0.098 (0.004)
0.175 (0.007)
0.1 (0.004) max.
0.550 ref. (0.022 ref.)
0.9 (0.035)
3.1 (0.122)
2.8 (0.110)
0.5 (0.020)
0.45 (0.018)
0.45 (0.018)
0.35 (0.014)
0.35 (0.014)
0.3 (0.012)
2.6 (0.102)
2.35 (0.093)
Foot print recommendation:
1 (0.039)
0.9 (0.035)
Document no.: 6.541-5014.01-4
Rev. 8 - Date: 23.Sept.2009
17418
0.9 (0.035)
0.7 (0.028)
2 (0.079)
1.43 (0.056)
1.20 (0.047)
0.45 (0.018)
0.35 (0.014)
1 (0.039)
0.9 (0.035)
0.95 (0.037)
0.95 (0.037)
Rev. 1.2, 13-Feb-18
Document Number: 85418
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
