MMF003153

125UT General Purpose Strain Gages—Tee Rosette GAGE PATTERN DATA GAGE DESIGNATION RESISTANCE (OHMS) OPTIONS AVAILABLE See Note 1 See Note 2 See Note 3 120 ±0.4% 350 ± 0.4% CEA-XX-125UT-120 CEA-XX-125UT-350 P2, SP35 P2, SP35 DESCRIPTION Two-element 90° tee rosette for general-purpose use. Exposed solder tab area 0.10 x 0.07 in (2.5 x 1.8 mm). actual size GAGE DIMENSIONS Gage Length 0.125 ES 3.18 ES Overall Length 0.325 CP 8.26 CP Legend ES = Each Section S = Section (S1 = Section 1) Grid Width 0.165 ES 4.19 ES CP = Complete Pattern M = Matrix Overall Width 0.365 CP 9.27 CP Matrix Length 0.42 10.7 inch millimeter Matrix Width 0.45 11.4 GAGE SERIES DATA — See Gage Series datasheet for complete specifications Series CEA Description Strain Range Temperature Range ±5% –100° to +350°F (–75° to +175°C) Universal general-purpose strain gages. Note 1: Insert desired S-T-C number in spaces marked XX. Note 2: Tolerance is increased when Option W, E, SE, LE, P, or SP35 is specified. Note 3: Products with designations and options shown in bold are not RoHS compliant. www.micro-measurements.com 1 For technical questions, contact mm@vpgsensors.com Document No.: 11230 Revision: 30-Aug-2016 Legal Disclaimer Notice Vishay Precision Group, Inc. Disclaimer ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE. Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “VPG”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. The product specifications do not expand or otherwise modify VPG’s terms and conditions of purchase, including but not limited to, the warranty expressed therein. VPG makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase. To the maximum extent permitted by applicable law, VPG disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Information provided in datasheets and/or specifications may vary from actual results in different applications and performance may vary over time. Statements regarding the suitability of products for certain types of applications are based on VPG’s knowledge of typical requirements that are often placed on VPG products. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. You should ensure you have the current version of the relevant information by contacting VPG prior to performing installation or use of the product, such as on our website at vpgsensors.com. No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any conduct of VPG. The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise expressly indicated. Customers using or selling VPG products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify VPG for any damages arising or resulting from such use or sale. Please contact authorized VPG personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Copyright Vishay Precision Group, Inc., 2014. All rights reserved. Document No.: 63999 Revision: 15-Jul-2014 www.vpgsensors.com 1